文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第3205至3216个,产品总数3,650个

切换升序
S)
EUROPEAN POLYMER JOURNAL · 2024 · IF 5.8

Synthesis of long-chain aliphatic poly(β-thioester)s via thiol-Michael polyaddition and their applications in noble metal recovery and information encryption

Shi-Si Li,Jun-Lin Pan,Xi-Long Chen,Jing Xu,Zi-Long Li,Chunzu Cheng

Long-chain aliphatic polyesters are recognized as the most promising polyethylene mimics in that these materials show comparative physicochemical properties to polyolefins and own the unique merits of degradability and/or recyclability. Nevertheless, the application scenarios of these polymers are rather limited owing to the lack of functional groups. Herein, sulfur atoms are incorporated into the microstructures of long-chain aliphatic polyesters to decipher the variations of physicochemical properties upon replacing specific methylene units by thioether moieties and simultaneously impart polyethylene-like materials with functionalities. First of all, high molecular weight polyesters P1 - P4 and poly(β-thioester)s P5 - P8 were obtained via condensation polymerization and thiol-Michael polyaddition, respectively. As for phase transition behaviors, poly(β-thioester)s show inferior crystallization/melting temperatures and the corresponding enthalpy changes than their polyester counterparts, and a loosely packed crystalline structure should be responsible for such thermal property degradation. It is reasonable that replacing specific methylene units of long-chain aliphatic polyesters by sulfur atoms, the much bulkier functional entities, will definitely cause great disturbance to the regular arrangement of polymer chains. The rapid hydrolytic degradation of poly(β-thioester)s in acidic and alkaline media can be ascribed to the easy penetration of water molecules into their incompact amorphous/crystalline regions. In the meantime, these poly(β-thioester)s exhibit great prospects in noble metal recovery and information encryption (optical anticounterfeiting). For instance, poly(β-thioester) P5 is an excellent adsorbent to abstract gold ions from water due to its outstanding metal coordination capability. Moreover, poly(β-thioester) P5 emits bright blue photoluminescence in concentrated solution and solid state upon UV irradiation as a result of the clustering-triggered through space electron delocalization and rigidified polymer chain conformation.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ACS Applied Materials & Interfaces · 2025 · IF 8.2

S-Scheme Heterojunctions in FeOOH–CN/Ni(OH)2 with Ni–Fe Synergistic Effects for Enhanced Photocatalysis-Self-Fenton Degradation of Organic Contaminants

Lei Zhao,Zilong Zhang,Tianyuan Zhang,Xiang Wang,Huanjun Peng,Jingdong Peng

The Fenton reaction in advanced oxidation processes is an ideal pathway for the generation of highly reactive hydroxyl radicals (•OH). However, its application in organic wastewater treatment is limited due to the requirement for acidic pH conditions and the additional introduction of H2O2 and Fe2+. In this study, FeOOH–CN/Ni(OH)2 composites were constructed as photocatalysis-self-Fenton catalysts by the amorphous FeOOH, which was uniformly anchored onto the surface of pure g-C3N4 (carbon nitride (CN)), and Ni(OH)2 was assembled on top. In this process, FeOOH–CN/Ni(OH)2 achieved self-sufficiency in H2O2 production while enabling efficient degradation of tetracycline hydrochloride (TCH) over a wide pH range, with a degradation ratio of up to 98.82%, and a first-order reaction rate constant (k) was determined to be 0.04925 min–1, representing a 10.15 times enhancement compared to the pristine CN. A reasonable S-scheme heterojunction charge migration mechanism was demonstrated based on valence-band X-ray photoelectron spectroscopy (VB-XPS), atomic force microscopy (AFM) equipped with a Kelvin probe force microscope, and density functional theory (DFT) theoretical calculations. Furthermore, degradation experiments demonstrated that the catalyst possesses remarkable degradation efficiency for other contaminants as well. On one hand, this significant improvement can be attributed to the formation of an S-scheme heterojunction between Ni(OH)2 and CN, which not only increased the specific surface area of the composite but also remarkably enhanced the separation and transfer efficiency of photogenerated charges. On the other hand, the synergistic effect between Ni and Fe effectively facilitated the activation of H2O2 and promoted the cycling of Fe3+/Fe2+. This study provided an efficient visible-light-driven photocatalysis-self-Fenton system, offering novel perspectives for enhancing Fenton-based processes and advancing the application of Fenton reactions in the treatment of organic wastewater.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
ADVANCED FUNCTIONAL MATERIALS · 2025 · IF 19

9% Certified Efficiency Record for Carbon-Based Sb2(S,Se)3 Solar Cells Enabled by Gradient-Oxidized Treatment of CdS Electron Transport Layer

Hu Li,Hongbin Lin,Xiaohui Liao,Weiqin Huang,Jinrui Cai,Limei Lin,Dong Wei,Zhiping Huang,Zhigao Huang,Shuiyuan Chen,Wei Zhang,Guilin Chen

Cadmium sulfide (CdS) persists as the standard electron transport layer (ETL) in high-efficiency Sb 2 (S,Se) 3 solar cells. However, its narrow bandgap imposes critical performance limitations through parasitic short-wavelength absorption and interface mismatch. Here, this bottleneck is shattered through an innovative in situ ozone doping strategy. This approach revolutionizes CdS ETLs by simultaneously: 1) Widening the bandgap of CdS ETL to drastically suppress parasitic short-wavelength photon loss; 2) Triggering a hexagonal-to-cubic phase transition that disrupts coherent Sb 2 O 3 impurity growth during Sb 2 (S,Se) 3 deposition; and 3) Engineering an oxygen-rich, defect-resistant FTO/CdS interface (DFT-validated), thereby slashing recombination and enabling superior carrier extraction. As a result, a certified world-record power conversion efficiency of 9.0% for carbon-based Sb 2 (S,Se) 3 solar cell is achieved ( V OC of 0.4908 V, J SC of 26.88 mA cm −2 , and FF of 68.19%) using an FTO/CdS:O/Sb 2 (S,Se) 3 /PbS/carbon configuration. This work, beyond setting a new benchmark for carbon-based Sb 2 (S,Se) 3 solar cells, shows that these devices demonstrate exceptional intrinsic stability under long-term and extreme damp-heat conditions without encapsulation, thus propelling Sb 2 (S,Se) 3 technology toward commercial viability.

CAS / MDL: 7782-49-2
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2025 · IF 13.2

Poly(ionic liquid)s-assisted synthesis of Co single-atoms anchored on N-doped carbon nanofibers for formaldehyde removal via room temperature thermocatalysis

Bing Du,Yunhan Zhao,Fuzhou Wen,Zhen Tan,Haipeng Yang,Zhaotian Liang,Guangliang Gary Liu

Developing cost-effective transition metal (TM) catalysts for removing formaldehyde (HCHO) via room temperature thermocatalytic oxidation is gaining attention for its potential benefits in energy savings and health protection. In this work, we synthesized a nitrogen-doped carbon fiber catalyst with atomically dispersed cobalt (p-Co 1 @NCF) using a novel poly(ionic liquid)s-assisted (PILs-assisted) method. Structural analysis confirmed that PILs play a key role in forming stable Co N 4 sites, achieving a cobalt loading of 2.5 wt%. The p-Co 1 @NCF catalyst demonstrated outstanding performance, achieving 95 % HCHO removal at 100 ppm and RT, with a specific activity of 0.60 mol HCHO ·mol Co −1 ·h −1 and stable decomposition over 96 h. Mechanistic studies indicated that the catalyst's efficiency stems from its ability to adsorb and activate oxygen (O 2 ) molecules. This work highlights the potential of PILs-assisted synthesis in creating effective single-atom TM catalysts and represents an important advance in RT thermocatalytic HCHO removal.

CAS / MDL: 1934-75-4 870196-80-8
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
APPLIED CATALYSIS B-ENVIRONMENTAL · 2024 · IF 20.2

Stable Cu+/Cu2+ species derived from in-situ growing Cu-S-V bonds in CuVxS electrocatalysts enables high efficiency CO2 electroreduction to methanol

Xuli Hu,Zhen Zhang,Zhenyao Li,Yushan Wu,Wei Wei,Yao Wang,Junchen Xu,Mingyue Ding

Regulating oxidation state of Cu-based chalcogenides catalysts during electrolysis is of great significance for efficient CO 2 electrochemical reduction reaction (CO 2 RR) to methanol, which still remains a dramatic challenge. Herein, we construct a heterogeneous Cu 3 VS 4 /CuS electrocatalyst (denoted as CuV x S), in which the in-situ growing Cu-S-V bonds avoid the accumulated electrons on oxidized Cu sites and inhibit the deep reduction of CuS to metallic Cu during electrolysis, maintaining stable and abundant reactive Cu + /Cu 2+ species to promote CO 2 RR performance to methanol. By this design, the CuV 0.1 S catalyst achieves an ultrahigh methanol selectivity of 79.8 %. In-situ FTIR measurement reveals that the synergistic effect of Cu + /Cu 2+ species and Cu-S-V bonding facilitates the *CO adsorption and the subsequent *CO hydrogenation process, which improve the generation of *CHO and *OCH 3 intermediates for enhanced methanol selectivity. This work provides a new insight into stabilizing high oxidation state of Cu-based electrocatalyst to maintain sufficient active sites for CO 2 RR.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2024 · IF 13.3

The synergy of low S-vacancy and Cu sites in Cu-In4SnS8 promotes the favorable conversion of CO2 to ethanol with full selectivity

Fuxia Huang,Zihao Jiao,Feng Wang,Ya Liu,Liejin Guo

Direct photocatalytic CO 2 conversion to C 2 products holds notable potential, but this technology is still limited by the high thermodynamic energy and sluggish kinetics. By introducing Cu in In 4 SnS 8 catalyst, we here developed low S vacancies and chemical reactive sites photocatalysts Cu-In 4 SnS 8 , enabling photocatalytic CO 2 to ethanol with full selectivity. Minor electron paramagnetic resonance peak intensity and large formation energy for S-vacancy suggest Cu introduction suppresses S vacancies formation. Low S vacancies photocatalysts Cu-In 4 SnS 8 possess excellent carrier transfer and separation ability by the steady photoluminescence and transient fluorescence characteristic results. Furthermore, in situ, FTIR measurements confirmed ethanol formation via the presence of the intermediates *COOH, *CO, *OCCO(H), and *OCH 2 CH 3 . Also, theory calculations reveal that Cu efficiently reduces the energy barriers of the rate-limiting steps of *COOH and *COH, and promotes C-C coupling and multi-proton coupled electron transfer processes by co-adsorption and asymmetric charge distribution effects. As a result, the optimized sample achieves 0.73 μmol h −1 CH 3 CH 2 OH generation with full selectivity.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
NEW JOURNAL OF CHEMISTRY · 2024 ·Vol. 48 ·期 36 ·16107-16118 · IF 2.7

Reaction strategies of bisphenol A derivatives to regulate the microstructure of polyarylates: synthesis of bisphenol S/bisphenol A random polyarylates and block polyarylates

Zhoufeng Wang,Bolin Wang,Yingying Liu,Xiubo Long,Wenlong Yao

A series of linear block polymers and random polymers were synthesized by interfacial polycondensation using two bisphenols with similar structures, bisphenol S (BPS) and bisphenol A (BPA), and terephthaloyl chloride and isophthaloyl chloride. Random polymers and block polymers with the expected topology were structurally characterized by 1H NMR, FTIR, GPC, WAXD, and Raman spectroscopy. The results demonstrated that there was no significant difference in the thermal stability of the block and random polyarylates, which was due to the fact that the covalent bonds of the linked monomers did not change substantially, and the bond energies were the same. However, due to the alteration of the molecular sequence structure, the block polymer exhibited a lower glass transition temperature, a pronounced melting peak, and better solubility. With physical cross-linking points consisting of microcrystalline phases formed by the relatively regular molecular chain structure, the block polyarylates exhibited a higher modulus of elasticity than the random polyarylates. This illustrated that it is possible to prepare new functional polyarylates without changing the monomer composition, but only by manipulating the reaction process.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ADVANCED FUNCTIONAL MATERIALS · 2024 ·Vol. 34 ·期 40 ·2404044 · IF 18.5

Regulation of both Bulk and Surface Structure by W/S Co-Doping for Li-Rich Layered Cathodes with Remarkable Voltage and Capacity Stability

Zhenkun Liu,Xiangli Che,Wei Wang,Gesong Huang,Wenjie Huang,Chenyu Liu,Qi Liu,Ye Zhu,Zhan Lin,Dong Luo

Lithium-rich layered oxides (LLOs) have gained significant attention due to their high capacity of over 250 mAh g −1 , which originates from the charge compensation of oxygen anions activated under high voltage. However, the charge compensation of oxygen anions is prone to over-oxidation, leading to serious irreversible oxygen release, surface-interface reactions, and structural evolution. These detriments make LLOs undergo fast voltage decay and capacity fading, which have hindered their practical applications for many years. Herein, this work develops a multifunctional co-doping strategy and constructs W─O bonds with strong bonding interaction and covalence, low bond energy Li─S bonds with non-binding electrons near the Fermi level, and continuous and homogeneous surface spinel-like layer induced by W/S co-doping. Their synergistic effect significantly mitigates the irreversible oxygen release and surface-interface reactions and improves structural stability of Li-rich layered cathodes. Thus, the designed and prepared Co-free Li-rich layered cathode (Li 1.232 Mn 0.574 Ni 0.191 W 0.003 O 1.995 S 0.005 ) delivers superior voltage and capacity stability. Its capacity retention after 400 cycles is as large as 86%, and its voltage decay rate from the 10th to the 400th cycle is only 0.626 mV cycle −1 .

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Journal of Environmental Chemical Engineering · 2024 · IF 7.4

Reticular poly(pyrrole methylene)s synthesized by synchronous-cross-linking process for the capture of Hg(ll) from water: Adsorption performance and mechanism

Jiarui Zhang,Bianyan He,Yubing Wang,Shanshan Li,Jiangtao Feng,Mingtao Li,Wei Yan

The development of novel high-capacity porous materials is critical to advancing the treatment of mercury-containing wastewater. In this study, two reticular poly(pyrrole methylene) adsorbent materials (PPB2E and PPD2E) were synthesized by a synchronous cross-linking method and successfully employed for Hg(II) adsorption in water. Their adsorption performance on Hg(II) in water was investigated. The results showed that PPB2E and PPD2E have large specific surface areas (535.43 m 2 /g and 523.23 m 2 /g, respectively) and are abundant microporous, with the molecular chains partially cross-linked and partially oxidized to form a conjugated structure. The adsorption of Hg(II) by the two adsorbents could reach equilibrium within 120 min, and the adsorption behavior followed the pseudo-second-order model. The adsorption isotherms were more in line with the Langmuir model, and the maximum adsorption capacities of PPB2E and PPD2E for Hg(II) were up to 1537.46 mg/g and 1511.94 mg/g (298 K, pH = 4), respectively. The two adsorbents exhibited excellent adsorption selectivity for Hg(II) in mixed metal salt solutions with good cycling stability. The primary adsorption mechanism of the synthesized materials for Hg(II) was jointly verified by characterization and DFT calculations: Hg(OH) 2 molecules were adsorbed by forming hydrogen bonds with pyrrole N and carboxyl O in the adsorbents. Compared with other metal ions, the materials have more active sites for Hg(II) adsorption, higher utilization, and easier formation of stable adsorption configurations, thus exhibiting highly selective adsorption.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ENERGY & FUELS · 2024 · IF 5.2

Role of Amphiphilicity in Low-Dosage Biodegradable Inhibitors for Clathrate Hydrate: A Kinetic Study of Inhibition by Highly Branched Poly(l-lysine)s

Ying Xu,Dong Wang,Xin Wang,Jian Dong

The rapid growth of natural gas clathrate hydrate has been a significant safety hazard in off-shore natural gas drilling and gas transport. Alleviation of hydrate formation can be achieved by applying low-dosage hydrate inhibitors of polymers during operation. In order to combine the advantages of high adsorption potential and environmental friendliness, we study the kinetics of hydrate inhibition of amphiphilic highly branched poly(l-lysine) (PLL) by NMR relaxometry. The introduction of n-butyl and cyclohexyl groups in PLLs was found to be significantly effective in prolonging the induction times of sII clathrate hydrates. Key physical–chemical factors involved in the mechanism previously proposed by molecular dynamics simulations can be clarified by NMR relaxometry. Induction times for the formation of hydrate are associated with the interfacial water amount but are not related to the hydrogen bonding strength or dynamics of the free water component. The amphiphilic PLLs in the interface interact with the hydrate surfaces through their hydration shell. Analysis of the molecular motion and freezing kinetics of water in the fluid before and during hydrate formation reveals that the polymers can reduce the rates of hydrate growth from the free water by a factor of 5 to 10. A further significant decrease in the growth rates from small hydrate particles by a factor of 10 to 2600 was observed in the presence of the amphiphilic PLLs with n-butyl and cyclohexyl groups. The distinct crystal growth kinetics in the heterogeneous interface are influenced by the terminal alkyl groups of the polymers, with changing growth geometry or crystal shapes and consistent with the interfacial Gibbs–Thomson effect. A high Avrami index value of the isothermal crystal growth and nonfreezable water amount favors a long induction time. The PLL inhibitors adsorb to the hydrate surface and act via an interfacial mechanism.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ELECTROCHIMICA ACTA · 2024 · IF 5.5

S-doped g-C3N4 on Co/Ni metal-organic framework as efficient bifunctional electrocatalyst for in-situ hydrogen production from high-salt wastewater

Shuting Luan,Shiyi Zhang,Wenhua Zhang,Shiwen Lv,Xuchun Li,Xuhua Ren,Yanqing Cong

An efficient and stable catalyst is the key to electrocatalytic hydrogen production . Herein, a bifunctional electrocatalyst is developed for electrocatalytic hydrogen production by depositing S-doped g-C 3 N 4 on Co/Ni metal-organic framework electrode (namely CoNi-MOFs/S-g-C 3 N 4 ). Compared with the original Co/Ni metal-organic framework (CoNi-MOFs), the overpotential of hydrogen production on CoNi-MOFs/S-g-C 3 N 4 is reduced by 49.5 %, the charge transfer resistance is reduced by 74.5 %, and the electrochemically active area is expanded by 60.1 times. Moreover, CoNi-MOFs/S-g-C 3 N 4 can be used as an efficient bifunctional electrocatalyst for overall water splitting. Impressively, using CoNi-MOFs/S-g-C 3 N 4 as the anode and cathode, the hydrogen yield can reach 5.513 mmol h −1 and the energy consumption is 5.822 kWh Nm −3 at a current density of 250 mA cm −2 . In addition, an in-situ overall water splitting system was designed for hydrogen production using high-salt wastewater as water source without additional pre-desalination process, which realizes green hydrogen production and reduces the cost. The hydrogen yield was hold in the range of 5.2–5.3 mmol h −1 for a week, showing excellent performance of hydrogen production and strong stability. More importantly, the system can be applied to various high-salt wastewater with wider pH and salinity, and shows promising application potential for hydrogen production in actual wastewater.

CAS / MDL: 68-12-2 57-13-6
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
APPLIED SURFACE SCIENCE · 2017 · IF 3.387

Systematic research on Ag2X (X = O, S, Se, Te) as visible and near-infrared light driven photocatalysts and effects of their electronic structures

Wei Jiang,Zhaomei Wu,Yingming Zhu,Wen Tian,Bin Liang

Four silver chalcogen compounds, Ag 2 O, Ag 2 S, Ag 2 Se and Ag 2 Te, can be utilized as visible-light-driven photocatalysts. In this research, the electronic structures of these compounds were analyzed by simulation and experiments to systematically reveal the relationship between photocatalytic performance and energetic structure. All four chalcogenides exhibited interesting photocatalytic activities under ultraviolet, visible and near-infrared light. However, their photocatalytic performances and stability significantly depended on the band gap width, and the valence band and conduct band position, which was determined by their composition. Increasing the X atomic number from O to Te resulted in the upward movement of the valence band top and the conduct band bottom, which resulted in narrower band gaps, a wider absorption spectrum, a weaker photo-oxidization capacity, a higher recombination probability of hole and electron pairs, lower quantum efficiency, and worse stability. Among them, Ag 2 O has the highest photocatalytic performance and stability due to its widest band gap and lowest position of VB and CB. The combined action of photogenerated holes and different radicals, depending on the different electronic structures, including anion ozone radical, hydroxide radical, and superoxide radical, was observed and understood. The results of experimental observations and simulations of the four silver chalcogen compounds suggested that a proper electronic structure is necessary to obtain a balance between photocatalytic performance and absorbable light region in the development of new photocatalysts.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。