Journal of Materials Chemistry A
·
2019
·Vol. 7
·期 39
·22453-22462
·
IF 10.733
Liang Yan,Bing Zhang,Junlu Zhu,Zhonggang Liu,Haiyan Zhang,Yunyong Li
Exploring highly efficient and cost-effective electrocatalysts has become imperative for neutral-pH water splitting, which is environmentally friendly and can reduce the cost of electrolysis systems. Here, we report an effective strategy to design a novel type of callistemon-like Zn and S codoped CoP nanorod clusters by introducing both Zn and S into cobalt phosphide, thereby creating electrocatalysts for highly efficient and stable neutral water splitting. The best Zn and S codoped CoP nanorod clusters on carbon paper (Zn,S–CoP NRCs/CP) require overpotential values of 67 and 391 mV for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) at 10 mA cm−2 in 1.0 M phosphate-buffered solution, respectively. Remarkably, this enables a neutral electrolyzer to deliver 10 mA cm−2 at a low cell voltage of 1.70 V, which is superior to those afforded by the Pt/C/CP‖IrO2/CP couple and most of the state-of-the-art electrocatalysts. Impressively, this electrolyzer can be powered by an AA battery (∼1.5 V). Density functional theory computations and systematic experiments have verified that the improved HER and OER activities originate from the optimized electronic structures that can facilitate the adsorption and desorption of hydrogen intermediates after introducing Zn and S and accelerating the formation of oxygenated intermediates on CoOOH, respectively. This work provides a new strategy to boost the performance of transition metal phosphides for neutral water or seawater splitting.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2019
·
IF 8.355
Jiaojie He,Yuhong Xu,Wei Wang,Bo Hu,Zijie Wang,Xin Yang,Yu Wang,Liwei Yang
A series of hierarchical micro/nano Ce-based composites were derived from Ce-MOF via thermal treatment in N 2 atmosphere. Different from conventional complete decomposed materials, forming cerium oxide in air, Ce-MOF that calcinated in N 2 at lower temperatures (400 °C or 500 °C) showed a partial thermal decomposition with high percent content of Ce(III). Even though the complete decomposed products held higher surface areas, the partial decomposed samples exhibited extremely higher phosphate uptake, with working capacity 2–4 times higher than that of ceria. The results implied a predominant effect of different valence states on phosphate removal by Ce-based materials, in which Ce(III) species were demonstrated playing the major role to form binding with phosphate. The maximum adsorption capacity (189.4 mg/g) was achieved by Ce-MOF-500(S) with wide applicable scope of pH ranging from 2 to 12 and great selectivity for phosphate in the presence of competing anions. Remarkably, Ce-MOF-500(S) described obvious enhanced phosphate adsorption ability under alkaline condition. This was due to the fact that the hydrolyzed Ce(III) species brought more active sites in the form of hydroxyl groups for ligand exchange with phosphate. Furthermore, based on the analysis of FTIR, XPS, XRD and zeta potential, electrostatic attraction, ligand exchange and surface precipitation were confirmed as the main adsorption mechanisms for partial decomposed samples, while electrostatic attraction was the main mechanism for complete decomposed samples.
✓ 已验证
产品关联
DOI
高影响因子
COLLOID AND POLYMER SCIENCE
·
2018
·Vol. 296
·期 3
·627-636
·
IF 1.967
Jong Kwanghyok,Ju Benzhi,Xiu Jinghai,Her Ryohua,Son Sunil
In this study, a novel type of temperature/pH dual responsive polymer PyHES- DMAET ((2-hydroxy-3-(2-propynyloxy) propyl hydroxyethyl starch (PyHES))-2-(dimethylamino) ethanethiol (DMAET)) was synthesized. First, the temperature-responsive polymer PyHES was prepared via hydrophobic modification of hydroxyl groups in hydroxyethyl starch (HES) with propynylglycidyl ether (PGE) subsequently; pH-responsive tertiary amine group was connected to the propynyl group via a thiol-yne click reaction. Because PyHES-DMAET has pH-responsive amino groups and hydrophobic thioether groups, its aqueous solution exhibits excellent temperature/pH dual sensitivity, i.e., a good transference between the hydrophobic (or self-assembly) and hydrophilic (or swelling) state along as a result of changing temperature/pH values; these properties can be exploited, for hydrophobic drug release. The drug release reached 96% at 37 °C and a pH of 6.5. The drug loading capacity of PyHES-DMAET was increased by increasing the degree of substitution (DS) of the hydrophobic propynyl groups in the PyHES. The highest drug loading capacity for doxorubicin (DOX) achieved in this study was 33 wt%.
✓ 已验证
产品关联
DOI
高影响因子
ANALYTICAL CHEMISTRY
·
2018
·
IF 6.042
Xilin Bai,Suying Xu,Leyu Wang
The sensitive and selective detection of hydrogen sulfide is of great importance due to its crucial role in pathological and physiological processes. Herein, we report a novel fluorescent platform, AuNCs@GC, for selective detection of hydrogen sulfide in living cells by impregnating the Au nanoclusters (AuNCs) into a biocompatible cationic polymer matrix, glycol-chitosan (GC) nanogel. The confinement effect significantly increased the emissive Au(I) units, resulting in a 6-fold enhancement of quantum yield (from 6.38% to 36.42%). In addition, the prepared positively charged AuNCs@GC nanogel exhibits excellent selectivity and improved sensitivity to aqueous sulfides. Moreover, the as-fabricated AuNCs@GC showed very good biocompatibility and super fluorescence stability across the full pH range and good salt tolerance, which demonstrated excellent adaptability toward intracellular sulfide imaging.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Polymer Chemistry
·
2018
·Vol. 9
·期 7
·878-884
·
IF 4.927
Yangchun Tao,Siwei Liu,Yi Zhang,Zhenguo Chi,Jiarui Xu
In this study, pentaerythritol tetra(3-mercaptopropionate)-allylurea-poly(ethylene glycol) (PETMP-AU-PEG), produced by the Schiff-base reaction between terminal-aldehyded PEG and PETMP-AU, was used to prepare doxorubicin (DOX)-loaded polymers for triggered release. The DOX-loaded PETMP-AU-PEG polymers had sizes of about 200 nm, non-toxicity and highly pH-sensitive properties. An in vitro release study confirmed that the polymer could release DOX rapidly by cleavage of acid-labile imine bonds of the polymer. The release of DOX at neutral pH was very slow. However, in a weakly acidic environment (pH 6.8 and pH 6.0), it released much faster within the first 2 h. Fluorescence microscopy further verified that DOX released from PETMP-AU-PEG polymers could be pH sensitive. According to the results of cytotoxicity determination and microscopy imaging of U2OS cells (human osteosarcoma, tumor cells) and MC3T3-E1 Subclone 14 cells (normal tissue cells), the DOX-loaded polymers could maintain high stability in the neutral environment while they release DOX rapidly in response to the very weakly acidic environment. Moreover, it is more important that the U2OS could be inactivated in the micro-acidic environment produced by its own growth, even in a neutral environment, without any chemical reagent addition.
✓ 已验证
产品关联
DOI
高影响因子
Polymer Chemistry
·
2018
·Vol. 9
·期 25
·3488-3498
·
IF 4.927
Yue Ding,Chang Du,Jiwen Qian,Linzhu Zhou,Yue Su,Rong Zhang,Chang-Ming Dong
To overcome the tumor and cellular barriers in cancer chemotherapy, the construction of biodegradable polymeric nanomedicine with pathological stimuli-responsivity is still challenging. In this work, a new class of polypeptide copolymer nanoparticles with a sheddable PEG corona and a dynamic disulfide bond cross-linked core was fabricated in aqueous solution, which can respond to tumor pH and intracellular reductive milieu. The polypeptide block copolymer (i.e., PEG-D-PC) composed of hydrophilic poly(ethylene glycol) (PEG) and thiol-pendant poly(L-cysteine) (PC) was synthesized via the primary amine terminated PEG dimethylmaleic anhydride derivative initiated ring-opening polymerization of α-amino acid N-carboxyanhydride and a sequential photocleavage reaction. The size and zeta potential change of the core-cross-linked (CCL) nanoparticles was monitored by on-line dynamic light scattering at pH 6.5, 10 mM DTT, and pH 6.5 + 10 mM DTT, respectively. In a similar manner, the anticancer drug camptothecin (CPT)-loaded CCL nanoparticles exhibited dual-stimuli-triggered drug release profiles. The CPT-loaded CCL79 nanoparticles facilitated the cellular internalization and CPT release inside the HeLa cells at pH 6.5, as confirmed by flow cytometry and fluorescence microscopy. The half maximal inhibitory concentration of CPT-loaded CCL79 nanoparticles at pH 6.5 was greatly lowered 31.8 fold to 0.61 μg CPT equiv. per mL compared to that at pH 7.4 + 0.1 mM BSO inhibitor, presenting dual stimuli-triggered cytotoxicity.
✓ 已验证
产品关联
DOI
高影响因子
Nanoscale
·
2018
·Vol. 10
·期 14
·6660-6670
·
IF 7.233
Yanfeng Liu,Yin Ding,Huilin Gou,Xin Huang,Guiyang Zhang,Qi Zhang,Yunzhong Liu,Zhen Meng,Kai Xi,Xudong Jia
The synthesis of well-defined light-element-derived quantum dots (LEQDs) with advanced optical properties under mild conditions is highly desirable yet challenging. Here, a polyaniline (PANI) structure is introduced into carbon-rich LEQDs to yield well-defined, fluorescent polyaniline quantum dots (PAQDs), PAQD24, through a one-pot room temperature reaction. The mild synthetic conditions effectively minimize the defects introduced during the conventional synthesis and endow PAQD24 with desirable optical properties, including a narrow emission band (full width at half maximum = 55 nm), an optimal quantum yield of 32.5% and two-photon fluorescence. Furthermore, the bandgap of PAQD24 is highly sensitive toward pH variations in the near-neutral region, due to the proton doping and dedoping of the PANI structure. Such unique properties together with its fine bio-compatibility enable the application of this material as a turn-on fluorescent probe for the labeling of acidic biotargets from sub-cellular to organ levels, providing potential applications in diagnosis and surgery guidance for certain diseases.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Nanomedicine-Nanotechnology Biology and Medicine
·
2018
·
IF 6.5
Zeliang Wei,Guang Xin,Haibo Wang,Huajie Zheng,Chengjie Ji,Jun Gu,Limei Ma,Chaoyi Qin,Zhihua Xing,Hai Niu,Wen Huang
Thrombosis is the leading cause of death in patients with cardiovascular disease in the world. Current antithrombotic agent aspirin has serious side effects such as higher bleeding risk and serious gastrointestinal ulcers . Diosgenin reported in clinical research could prevent thrombosis without side effects. However, poor bioavailability and low knowledge on its molecular targets limit its clinical application. A novel prodrug with antithrombotic effect was prepared based on conjugating diosgenin derivatives to PEG with Schiff-base bond. The prodrug with long blood circulation time and satisfying safety could self-assemble into micelles in water. The prodrug micelles with pH-responsibility could targetedly release diosgenin in position of thrombus in vivo . The results indicate that the prodrug micelles without bleeding risk and histological damages prevent thrombosis by inhibiting platelet activation and apoptosis . Our studies demonstrate that the prodrug micelles could obviously enhance the efficacy in the prevention of arterial thrombus and venous thrombus than aspirin.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
NEW JOURNAL OF CHEMISTRY
·
2018
·Vol. 42
·期 16
·13453-13460
·
IF 3.201
Zhangkang Li,Huiyu Bai,Shengwen Zhang,Wei Wang,Piming Ma,Weifu Dong
In this paper, poly(N-isopropylacrylamide) (PNIPPAm), polyacrylic acid (PAA), polyvinyl alcohol (PVA) and cellulose nanocrystals (CNC) were used to prepare double-network hydrogels by the photo-crosslinking technology. The results from mechanical and swelling tests indicated that photo-crosslinked PVA/CNC/P(NIPPAm-co-AA) hydrogels exhibited temperature-sensitive, pH-sensitive behaviors and good mechanical strengths. We prepared DN hydrogels, which combined the advantages of PNIPAAm, PAA and photo-crosslinking collectively in the PVA/CNC system, leading to controllable temperature and pH responses and improvement in physical properties. A simple and green method for the preparation of DN hydrogels was demonstrated, offering photo-crosslinked PVA/CNC/P(NIPPAm-co-AA) hydrogels as excellent prospects for applications in the medical field.
✓ 已验证
产品关联
DOI
高影响因子
Materials Science & Engineering C-Materials for Biological Applications
·
2018
·
IF 5.08
Wenhao Zhou,Zhaojun Jia,Pan Xiong,Jianglong Yan,Ming Li,Yan Cheng,Yufeng Zheng
To endow orthopaedic implants with satisfactory antibacterial properties, the design and development of antibiotic coating on the surface of implants is highly desired. In this work a novel and facile strategy was developed to form pH-responsive layer-by-layer (LbL) films implanted with polymeric micelles as nano-vehicles loaded with charge-weak antibiotic drugs, enabling high drug loading efficiency. Negatively charged tobramycin (Tob)-embeded heparin miscells (HET) and positively charged chitosan (CHT) were exploited as a pH-responsive LBL multilayer building block, respectively. The formation mechanism and pH-stimulated release behavior of the Tob-contained heparin micelles were studied. The characterization on the morphologies, chemical compositions and hydrophilicity of the modified surface confirmed the successuful deposition of the Tob-loaded CHT/HET multilayers coatings on the polydopamine-modified Ti surface. The drug release profiles displayed fast release at pH 7.4 and slow release after exposure to weakly acidic environments. Antibacterial tests indicated that the Tob-embed CHT/HET nanostructured multilayers not only strongly inhibited initial bacterial adhesion, but also disruptted biofilm formation. Particularly, this functional coatings showed “long-term antibacterial” pattern in acid condition. Meanwhile, MC3T3 cells showed acceptable adhesion, spread and proliferation on the multilayer coatings in cytocompatible studies. In a word, these multilayer coatings incorporated with a wide variety of antibiotics show promisiong applications in preventing postoperative infection and resolving unmet clinical need.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Applied Materials & Interfaces
·
2018
·
IF 8.097
Di Zhang,Jing Zhang,Qian Li,Hailong Tian,Na Zhang,Zhonghao Li,Yuxia Luan
The short lifetime and easy quick elimination of the near-infrared (NIR) dye new indocyanine green (IR820) in the body restrict its practical application as a photothermal agent in cancer therapy. Meanwhile, the drawback of poor water solubility of the chemotherapeutic drug paclitaxel (PTX) largely restricts its clinical applications. Herein, we, for the first time, combined IR820 and PTX in an “all-in-one” fluorescence imaging-guided chemo–photothermal therapy (PTT) platform by a rational design of a novel pH- and enzyme-sensitive IR820–PTX conjugate assembly. Specifically, the IR820–PTX conjugate nanoparticles exhibit an extremely high therapeutic agent content (IR820 and PTX, 95.7%). Besides the good stability in bloodstream, the IR820–PTX nanoparticles can target tumors for high accumulation via the enhanced permeation and retention effect. Particularly, our IR820–PTX nanoparticles simultaneously solve the obstacles of PTX poor solubility and the short lifetime of IR820 for cancer therapy. The simultaneous release of the free drug and dye can efficiently kill tumor cells by the combination of PTT and chemotherapy via NIR irradiation. Furthermore, the combined therapy can be imaging-guided by measuring the NIR fluorescence imaging resulting from the IR820 component. Therefore, our rationally designed pH- and enzyme-sensitive IR820–PTX conjugate nanoparticles provide an alternative “all-in-one” option for an efficient combinational dual-therapy and imaging.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2019
·
IF 6.361
Fang Wang,Jing Pi,Jing-Yu Li,Fei Song,Rui Feng,Xiu-Li Wang,Yu-Zhong Wang
Environmentally switched superwetting surfaces that can be used for separating various oil/water mixtures are of particular interest due to the increasing difficulty and complexity in oily wastewater treatment . Here, a novel fluorine-free pH-responsive coating is prepared by surface modification of SiO 2 nanoparticles with dimethyloctadecyl [3-(trimethoxysilyl) propyl] ammonium chloride and (N, N-dimethyl-3-aminopropyl) trimethoxysilane. With the assistance of polyethylene imine as a binder, such coating can be used for different porous substrates, e. g. cotton fabric and filter paper, to develop separation materials having tunable superhydrophilicity/superhydrophobicity and high antibacterial property. Due to the well-controlled surface wettability upon the pH variation, the as-prepared materials can effectively separate various types of oil/water mixtures with efficiency higher than 99.9%, including the layered oil/water mixture, water-in-oil emulsions and oil-in-water emulsions stabilized by different types of surfactants . Additionally, the materials can resist strong acid/base solutions and various organic solvents as well as 50-cycle mechanical abrasion and 120-cycle tape-peeling without losing anti-wetting performance. Featuring the tunable surface wettability, chemical/mechanical robustness, and antibacterial activity , such coating holds promising applications for treating various oil/water mixtures in harsh and biological-contamination conditions.
✓ 已验证
产品关联
DOI
PubMed
高影响因子