文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第3217至3228个,产品总数4,428个

切换升序
(Ni
CHEMICAL ENGINEERING JOURNAL · 2025 · IF 13.2

Synergistically enhanced co-adsorption of OH− and HMF on Cu-modified Ni aerogel for biomass upgrading coupled with hydrogen production

Jiahui Liu,Hongchen Liu,Fan Yang,Junpu An,Siyuan Sun,Yang Sun,Kexin Wei,Xinyang Sun,Junwei Yuan,Meitong Zhao,Haojia Zhong,Kuobo Wang,Jintian Ren,Zhenxing Li,Yongfen Li

The electrochemical oxidation of biomass-derived 5-hydroxymethylfurfural (HMF) represents a promising pathway to synthesize the critical polymer monomer 2,5-furandicarboxylic acid (FDCA). However, the restricted adsorption of both HMF and OH − to the catalyst surface results in low activity and selectivity. To address this issue, this study introduced an electrochemically assisted strategy to synthesize Ni aerogel with Cu heteroatom doping (Ni 0.94 Cu 0.06 /NF), demonstrating excellent performance for HMF to FDCA conversion in alkaline media. The catalyst achieves 10 mA cm −2 at 1.307 V vs. RHE, with outstanding Hydrogen evolution reaction (HER) activity (10 mA cm −2 @11 mV). Notably, the conversion rate of HMF, the selectivity of FDCA and the Faraday efficiency can reach 99.5 %, 99 % and 97 %, respectively. Scanning Electron Microscope (SEM) and transmission electron microscopy (TEM) demonstrated that the aerogel's self-supported 3D framework with interwoven nanowire structure enables efficient exposure of catalytic sites. X-ray photoelectron spectroscopy (XPS) analysis further showed the modification with Cu forms unique Ni O Cu linkage within the catalyst's surface region, which effectively adjusts the electronic configuration of Ni sites and increases lattice oxygen content, thereby enhancing HMF adsorption. Density functional theory (DFT) revealed that the synergistic interplay between Ni and Cu markedly boosts the uptake capacity for both HMF and OH − , improves the rate-determining step (RDS) thermodynamics by reducing its barrier, and consequently accelerates the HMF oxidation reaction (HMFOR). Our findings elucidate fresh perspectives into the structure-performance relationship of nickel-based catalysts and offer a novel approach for designing advanced electrocatalysts for biomass upgrading.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Journal of Energy Chemistry · 2025 · IF 14.9

Engineering core–shell-structured BaAl2O4 overlaid Ni catalyst with strong metal-support interaction for durable and efficient CH4 dry reforming

Qiangqiang Xue,Kang Hui Lim,Zhehao Sun,Binhang Yan,Zongyou Yin,Ange Nzihou,Yujun Wang,Guangsheng Luo,Feng-Shou Xiao,Sibudjing Kawi

Dry reforming of methane (DRM) over Ni-based catalysts is an economically reasonable technology for large-scale CO 2 utilization. However, prolonged Ni sintering and carbon deposition reduce the durability and efficiency of DRM, hindering its engineering application. Herein, we propose a facile approach by combining continuous microscale coprecipitation with solid-state reactions to construct a BaAl 2 O 4 -overlayer-confined Ni catalyst. The 5-wt.%-Ni@BaAl 2 O 4 catalyst exhibited advanced CO 2 and CH 4 conversions of 96% and 86% at 800 °C and a GHSV of 144 L∙g cat. −1 ∙h −1 . Moreover, the k d -CO 2 and k d -CH 4 of Ni@BaAl 2 O 4 were 0.0063 and 0.0029 h −1 ; which are approximately half and one-thirds of those of Ni/BaAl 2 O 4 and slightly better than those of Ni@MgAl 2 O 4 , underscoring the versatility of the proposed synthesis protocol for constructing core–shell structures. XAS, HAADF–STEM–EDS, and CO transmission-IR characterizations confirmed the SMSI of ∼2-nm amorphous BaAl 2 O 4 -overlaid ∼10 nm Ni with an overall mesoporous structure. After a long-term test, the sintering and coking inhibition effects of Ni@BaAl 2 O 4 (10 → 11 nm, 0.55 mg C ∙g cat. −1 ∙h −1 ) outperformed Ni/BaAl 2 O 4 (13 → 22 nm, 1.90 mg C ∙g cat. −1 ∙h −1 ) and Ni@MgAl 2 O 4 . In situ time-resolved CH 4 → CO 2 transient response, DRIFTS experiments, and DFT calculations suggested that Ni@BaAl 2 O 4 and Ni/BaAl 2 O 4 followed the Mars–van Krevelen and Langmuir–Hinshelwood redox mechanisms, respectively. The functional interfacial lattice oxygen promoted the removal of C ads * on Ni and core–shell structure induced fast CO 2 adsorption and CO desorption. The present study provides a facile approach for constructing a stable and active Ni-based core−shell catalyst. Furthermore, it offers novel insights into the functionalities of non-reducible spinel overlayers in the DRM process.

CAS / MDL: 10022-31-8
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Journal of Materials Chemistry A · 2025 · IF 9.5

Ni/Al co-doping induces FeO6 octahedral distortion to activate lattice oxygen in Ca2Fe2O5 for enhanced chemical looping hydrogen generation

Yile Zou,Hui Liu,Ruizhi Li,Jing Liu,Chenyao Wu,Zhao Sun,Yaning Zhang

Chemical looping steam methane reforming (CLSMR) is an efficient technology for syngas and hydrogen production, but its progress is hindered by catalyst activity and stability limitations. This study develops highly reactive Ca2NixAlyFe2−x−yO5 oxygen carriers, with Ni and Al doping significantly enhancing performance. At 850 °C, the Ca2Ni0.1Al0.2Fe1.7O5 carrier achieves excellent results: CO selectivity of 89.75%, syngas yield of 6.18 mmol g−1, and pure hydrogen yield of 4.40 mmol g−1 during the steam oxidation stage, with no carbon deposition and stable performance over 15 cycles. Ni doping enhances the catalytic activity, whereas Al doping promotes the formation of oxygen vacancies. Their synergistic effect enhances active site density and oxygen transport, boosting overall catalytic efficiency and enabling high-yield syngas and hydrogen co-production. Density functional theory (DFT) calculations indicate that the upward shift of the O-2p band center reflects enhanced reactivity of lattice oxygen, while adjustments in the Fe–O–Fe bond angles within FeO4 and FeO6 groups further optimize the migration pathways of oxygen ions. Co-doping with Ni and Al reduces the oxygen vacancy formation energy of the Ca2Fe2O5 oxygen carrier from 3.35 eV to 2.04 eV, and decreases the oxygen migration energy from 1.36 eV to 1.02 eV, demonstrating its facilitation in oxygen mobility and migration. Additionally, the synergistic interaction between oxygen vacancies and Brønsted acid sites further enhances reaction efficiency.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING SCIENCE · 2025 · IF 4.3

Molybdenum-modified platinum nanoparticles confined on Ni-encapsulated carbon nanotubes with strong metal-support interaction for efficient hydrogen evolution catalysis

Jiejie Meng,Lingzheng Bu,Duo Wang

The paper presents the design of an electrocatalyst named Mo-Pt/Ni-CNTs, which combines the advantages of strong metal-support interaction and the synergistic effect of active sites. In a three-electrode electrochemical measurement, the Mo-Pt/Ni-CNTs demonstrates a lower overpotential of 29.2 mV at 10 mA cm −2 , and a favorable Tafel slope of 33.7 mV decade −1 in comparison to Pt/C catalyst in 1.0 M KOH. Furthermore, the anion exchange membrane water electrolyzer cell achieves a low cell voltage of 2.41 V at 2 A cm −2 (in 1.0 M KOH solution at 80 °C). In-situ Raman analysis and DFT calculations reveal that introducing Mo atoms into the Pt sites and loading them onto the special carbon nanotubes, which are wrapped nickel (Ni-CNTs), can not only change the Pt valence state and electrical structure, but also form the strong metal-support interactions between Mo-Pt nanoparticles and Ni-CNTs.

CAS / MDL: 112-90-3
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY · 2025 · IF 8.3

The reclaimable hydrogels space-limited Ni-based/CdZnS to overcome photo-oxygen corrosion for efficient hydrogen production from solar energy

Huanyu Chen,Xingyu Huo,Jun Wang,Qiuyu Wang,Ziwen Wang,Bo Lv

A hydrogel CZS/NiS@HR for photocatalytic hydrogen production is fabricated through solvothermal synthesis of CdZnS (CZS) composites, followed by physical cross-linking and self-assembly. This material facilitates spatially oriented charge separation via heterojunctions, effectively suppressing electron-hole recombination. The hydrogen evolution rate reaches 65 mmol/g/h, with stable catalytic activity maintained at 45 mmol/g/h after five cycles. The hydrogel structure prevents the release of toxic Cd 2+ into the environment. Compared to CZS, the UV absorption edge of CZS/NiS@HR is significantly redshifted, confirming successful Ni-based heterojunction surface modification. The three-dimensional network of the hydrogel enhances H + diffusion, thereby improving photocatalytic hydrogen production efficiency while mitigating sulfide photo-oxygen corrosion and reducing catalyst costs. This study underscores the synergistic effects of heterojunctions and hydrogels in promoting sustainable photocatalytic hydrogen production.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CATALYSIS LETTERS · 2025 ·Vol. 155 ·期 7 ·1-14 · IF 2.4

Selective Hydrogenolysis of Diphenyl Ether and Lignin to Monoaromatics Over a Highly Efficient and Stable Ni-Pt/HZSM-5 Catalyst

Ren Xiaohong,Bao Zien,Wang Yong,Yu Xiaoqiang,Rong Zeming

To address the low hydrogenolysis efficiency of 4-O-5 bonds in lignin catalytic conversion, Ni-Pt/HZSM-5 bimetallic catalyst with a Ni/Pt molar ratio of 47:1 was developed using diphenyl ether (DPE) as a model compound. The results revealed that electron transfer from Ni to Pt induced a positive charge on the Ni surface, significantly enhancing its adsorption and activation capacity toward electron-rich 4-O-5 bonds. At 100 °C and 5 bar H 2 , the conversion of DPE reached 90.3% with 93.1% selectivity (phenol and benzene) and Ni-Pt/HZSM-5 retained stable over five cycles of use. When Ni-Pt/HZSM-5 was applied to pine sulfate lignin depolymerization at 220 °C and 5 bar H 2 , with yields of 12.9 wt% for phenol and 4-propylphenol and 16.3 wt% for methoxy phenolic compounds. Overall, this study would promote the application and development of high-efficiency bimetallic catalysts for the production of valuable chemicals from biomass. Graphical

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Materials Today Energy · 2026 · IF 8.1

Stable acidic ethanol electrolysis via in-situ formation of Pt/Ni(III) catalytic interfaces for hydrogen and chemicals co-production

Yang Wang,Yiling Feng,Yuxin Zhu,Yizhen Li,Chengjin Chen,Nanjia Yang,Wei Zhu,Zhongbin Zhuang

The electrochemical ethanol oxidation reaction (EOR) in acid offers a promising route for co-producing hydrogen and value-added chemicals, but suffers from severe Pt catalyst poisoning and poor stability. Herein, we report the synthesis of ultrathin PtNi nanowires (NWs) with abundant step defects for efficient and stable EOR. The PtNi NWs/C catalyst exhibits high mass activity (1.50 A mg Pt −1 @0.7 V vs. RHE), Faradaic efficiency (80% to acetic acid), and stability compared to the Pt NWs/C and Pt NPs/C counterparts. It has been demonstrated that the ultrathin NW structure endowed the PtNi NWs/C with high electrochemical active surface area and abundant step sites, while the incorporation of Ni facilitates the removal of poisoning CO and accelerates the EOR kinetics on Pt via the in-situ formation of Ni(III), leading to the superior performance. A practical electrolyzer using the PtNi NW as the anodic catalyst achieves 132 mA cm −2  at 0.8 V and sustains operation for 100 h.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
MICROPOROUS AND MESOPOROUS MATERIALS · 2026 · IF 4.5

Unexpected ultra-fine nickel phyllosilicate nanofibers formed on the surface of Ni-encapsulated zeolite catalyst: Phase identification and independent synthesis

Yutong Zou,Junbiao Wu,Meng Li,Gege Li,Yide Han,Yan Xu,Zhuopeng Wang

During the study of hydrothermal synthesis of nickel-encapsulated zeolite catalyst using the ligand-protection method, uniform nanofibers (∼10 nm diameter, hundreds of nanometers long) were unexpectedly observed on the surface of zeolite crystals. These nanofibers were subsequently synthesized independently outside the zeolite synthesis system and were identified as nickel-kerolite, a kind of talc-like nickel phyllosilicate. An optimal synthesis approach of the nickel phyllosilicate fibers was realized via a hydrothermal method using a synthetic gel comprising a silicon source, sodium hydroxide, nickel nitrate, and ethylenediamine (EDA). It is found that the formation of the unique fibrous morphology of nickel phyllosilicate requires a sufficiently strong alkaline medium and the presence of EDA. Ethylenediamine was proven to be essential for achieving the nano-fibrous morphology, probably due to the anisotropic growth inhibition from both EDA and its nickel complex (Ni-EDA), which restrict crystal development predominantly along one direction.

CAS / MDL: 109-76-2 111-40-0
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Progress in Natural Science-Materials International · 2021 ·Vol. 31 ·期 1 ·152-158 · IF 3.607

Synergetic effect of multiple phases on hydrogen desorption kinetics and cycle durability in ball milled MgH2–PrF3–Al–Ni composite

Zhonghui Sun,Jia Zhou,Qingan Zhang

A new MgH 2 –PrF 3 –Al–Ni composite was prepared by ball milling under hydrogen atmosphere. After initial dehydrogenation and rehydrogenation, Pr 3 Al 11 , MgF 2 , PrH 3 and Mg 2 NiH 4 nanoparticles formed accompanying the main phase MgH 2 . The hydrogen absorption-desorption properties were measured by using a Sieverts-type apparatus. The results showed that the MgH 2 –PrF 3 –Al–Ni composite improved cycle stability and enhanced hydrogen desorption kinetics. The improvement of hydrogen absorption-desorption properties is ascribed to the synergetic effect of the in situ formed Pr 3 Al 11 , MgF 2 , PrH 3 and Mg 2 NiH 4 nanoparticles. This work provides an important inspiration for the improvement of hydrogen storage properties in Mg-based materials.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2024 · IF 13.3

The promotion effect of Ru on catalytic activity and stability of Ni/Co-Al2O3 catalysts for simulated diesel steam reforming

Qunwei Guo,Xiaokun He,Jiaqi Geng,Jiawen Pan,Yuan Xue,Nan Xu,Bo Chi,Jian Pu

In this work, Ru is incorporated into Ni/Co to synthesize novel Al 2 O 3 -supported Ni-Ru/Co-Ru bimetallic catalysts. Tests verify their enhanced catalytic capability and durability and also reveal how each catalyst is deactivated. SEM and EDS results indicate that nanoparticle agglomeration on Ni-based surface triggers deactivation, and TG and XPS results suggest carbon deposition is fatal to Co-based catalysts. Implementing Ru effectively enhances catalytic activity and durability. To gain insight into the promoting effect of Ru, quantum mechanical methods are utilized to investigate the shifts in activation energies (E a ) in CH x * dehydrogenation processes on (1   1   1) surfaces. For the Ni catalyst, DFT calculations indicate that adding Ru decreases E a yet does not change the determining step. In contrast, adding Ru on the Co surface changes the major intermediates from CH* to CH 2 *, which inhibits further dehydrogenation , and hence mitigates carbon deposition to preserve the catalytic activity of the surface.

研究领域: 催化化学 · 材料科学 · 化学工程 · 量子化学 · 能量转换
✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
RSC Advances · 2015 ·Vol. 5 ·期 96 ·79022-79030 · IF 3.84

Preparation of modified cotton cellulose in ionic liquid and its adsorption of Cu(II) and Ni(II) from aqueous solutions

Lei Xu,Xiaoqiong Lu,Xiaomin Cheng

A series of novel cotton cellulose-graft-polycaprolactone copolymers with different grafting contents were successfully prepared via ring-opening polymerization (ROP) in an ionic liquid 1-N-butyl-3-methylimidazolium chloride ([Bmim]Cl). The structures of the grafting copolymers were systematically characterized by FTIR, CP/MAS13C-NMR, XRD, SEM and AFM, while thermal properties were investigated by DSC and TGA. Subsequently, Langmuir, Freundlich, Temkin, and Dubinin–Radushkevich (D–R) adsorption isotherms were representative to simulate adsorption isotherms of Cu(II) and Ni(II) ions in aqueous solution. From the comparison of different adsorption isotherm models, it was found that adsorption of Cu(II) by modified cellulose followed Langmuir, Freundlich and Temkin models, while that of Ni(II) followed the Freundlich model. The results of adsorption indicated that the selectivity sequence of metal ions on graft copolymers was Cu(II) > Ni(II) and the maximum removal capacities of Cu(II) and Ni(II) ions were 98.7% and 35.6%, respectively. Hence, the graft copolymers exhibited significant potential to be an environmentally feasible biosorbent for removal of Cu(II) and Ni(II) ions from aqueous solution.

研究领域: 环境科学 · 高分子化学 · 材料科学 · 重金属去除 · 吸附技术
✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
FUEL · 2026 · IF 7.5

Construction of a Ni/Semi-coke catalyst via a NiCl2-Lactic acid deep eutectic solvent for upgrading coal pyrolysis tar

Haozhao He,Tao Wang,Qu Zhang,Bo Li,Xianze Wang,Wenyan Mu,Dongling Wu

The high content of heavy components in coal pyrolysis tar constrains its high-value utilization. Although semi-coke-based catalysts are cost-effective and promising for catalytic upgrading, their performance needs further enhancement. In this study, a novel nickel chloride-lactic acid (NiCl 2 -LA) deep eutectic solvent (DES) was designed. Leveraging nickel-lactic acid coordination and the inherent hydrogen bond network of DES, it penetrates semi-coke to promote nickel-semi-coke reactions, anchor nickel species with good dispersion, and finally synthesize nickel-supported semi-coke-based catalyst (Ni/C) via carbothermal reduction. Characterization results indicated that the Ni/C catalyst possesses a hierarchical pore architecture dominated by mesopores, with an increased specific surface area, enhanced degree of graphitization, and well-dispersed Ni nanoparticles on the semi-coke support. Based on this, during catalytic pyrolysis, the semi-coke support and well-dispersed Ni active sites exerted a synergistic effect, promoting the release of coal pyrolysis volatiles and increasing the tar yield from 8.30 % to 10.90 %. Simultaneously, by facilitating the cleavage of C–H and C–C bonds, they drove the conversion of heavy tar components to light components, elevating the relative content of monocyclic aromatic hydrocarbons from 1.16 % to 3.96 %. Moreover, the proportions of light components (BP ≤ 360 ℃) and light oil (BP ≤ 170 ℃) reached 62.60 % and 18.15 %, respectively, both at relatively high levels. This study validates that the functional properties of DES can be harnessed for the targeted design and preparation of high-activity catalysts, providing a viable strategy for the upgrading of light components in coal pyrolysis tar.

CAS / MDL: 7791-20-0
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。