Environmental Science-Advances
·
2023
·Vol. 2
·期 5
·731-739
·
IF 0
Wen Wen,Yina Liu,Zhongping Li,Guangming Wen,Hung-Wing Li,Li Li
In this study, we report a simple pyrolytic strategy for N–C co-doped Fe-based nanoparticles (Fe–N–C) and exhibit their oxidase-mimicking and peroxidase-mimicking activity in a chromogenic reaction with 3,3′,5,5′-tetramethylbenzidine dihydrochloride (TMB) as a substrate. Structural analysis revealed that Fe–NX and Fe3C structures were formed with Fe-Imace coordination compounds as precursors and melamine as the nitrogen source, which provided abundant active sites for the Fe–N–C nanozyme. Interestingly, owing to the blocking effect triggered by π–π stacking between the tetracycline antibiotics (TCs) tetraphenyl skeleton and Fe–N–C, the substrate affinity of the Fe–N–C was significantly blocked, resulting in the solution fading. Under the optimum conditions, the UV absorption intensity versus the concentration of TCs was found to be linear over the range of 0.08–90 μM for tetracycline (TC), 0.1–80 μM for chlortetracycline (CTC) and 0.09–100 μM for oxytetracycline (OTC). The detection limits were 62 nM for TC, 85 nM for CTC and 88 nM for OTC. The Fe–N–C displayed good storage and long-term stability when stored at 4 °C for 30 days. In addition, based on its superparamagnetism, Fe–N–C can be effectively recycled and reused through an external magnetic field, avoiding secondary pollution.
✓ 已验证
DOI
JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY
·
2021
·
IF 6.064
Lezhu Su,Lizhou Ou,Yujiao Wen,Yifan Wang,Weilin Zhao,Zhi Zhou,Mei-e Zhong,Yongfa Zhu,Nan Zhou
Exploring catalyst materials which are advancing, recyclable and with high catalytic performances to remove persistent organic pollutants such as Quinclorac (QNC) is important. In this work, a novel N-doped carbon support CoFe 2 O 4 /Fe 0 hybrid catalyst (CFO/Fe@C) was in situ formed by a simple co-precipitation and calcination process. Fine intergrowth crystal CoFe 2 O 4 and Fe 0 were uniformly dispersed on the N-doped porous carbon that derived from the raw material Ethylene Diamine Tetraacetic Acid (EDTA), which also provided chelating effect to prevent the agglomeration of the metals. Interestingly, the Fe 0 could only be formed with the presence of cobalt, possibly due to the increased reduction property resulted from the particle refinement. The as-formed Fe 0 could not only activate the peroxymonosulfate (PMS) but also reduce the Co 3+ , resulting in a synergistic impact to remarkably enhance the degradation performance. Besides, the N-doped porous carbon can also benefit the degradation of pollutant by strengthening the electron transfer. A good degradation efficiency of QNC was obtained in CFO/Fe@C-PMS system and most of the QNC had been degraded to carbon dioxide , water and other small molecular organisms. The removal rate remained over 70% after four reuses and the material could be easily recovered from the solution due to the good magnetic properties. Therefore, the as-prepared CFO/Fe@C catalyst should be an ideal catalyst for the removal of organic pollutants .
✓ 已验证
DOI
高影响因子
ELECTROCHIMICA ACTA
·
2022
·
IF 7.336
Jiangshan Gao,Yang Zhou,Zhiming Liu,Huanhuan Wang,Yan He
Herein, N-doped carbon nanotubes (CNTs) encapsulating NiCo-Se nanoparticles (NPs) are assembled to spheres (NCNTs/NiCo-Se), which are successfully synthesized by using Ni-Co prussian blue analogues (PBAs) as templates and precursors. It is rare to derive CNTs from PBAs by means of C 3 H 6 among the reported work and the structure evolution of NCNTs spheres derived from PBAs is exhibited. The high flow rate of N 2 and C 3 H 6 tend to cause short CNTs and large diameter of CNTs, respectively, owing to the dual-effect of diffusion and deposition of C atoms. Due to the advantage superposition of CNTs with high length-diameter ratio and NiCo-Se NPs, NCNTs/NiCo-Se gets excellent capabilities of charge transfer, diffusion efficiency, and electrochemical reactions. When the C 3 H 6 /N 2 is 0.2/0.3 L min −1 , the as-fabricated NCNTs/NiCo-Se deliver a substantially appreciable specific capacitance of 171.1 mAh g −1 (current density of 1 A g −1 ). The asymmetric supercapacitor (ASC) yields a maximum energy density of 55 Wh kg −1 at a power density of 801 W kg −1 . In general, this work offers an attractive route to synthesize CNTs composites from PBAs.
✓ 已验证
DOI
高影响因子
AICHE JOURNAL
·
2020
·Vol. 66
·期 5
·e16917
·
IF 3.519
Bofeng Zhang,Yajie Tian,Dali Chen,Ling Li,Guozhu Li,Li Wang,Xiangwen Zhang,Guozhu Liu
Multimetallic nanocatalysts have attracted increasing attention for steam reforming owing to highly exposed active sites, but often suffering from severe sintering. Herein, we design subnanometric Ni-Pt bimetal clusters (ca. 1.7 nm) encapsulated in Silicalite-1 zeolite (2Ni0.5Pt@S-1) through ligand-stabilized method to prevent sintering by fixing the metal into microporous channels. In the steam reforming of n -dodecane test, 2Ni0.5Pt@S-1 gave an excellent activity and stability with a decrease of conversion only 4% at 600°C for 4 hr, which was about a quarter that of 2Ni0.5Pt/S-1 synthesized by co-impregnation method, ascribing to superior sinter-resistance of encapsulation structure. Moreover, 2Ni0.5Pt@S-1 exhibited a higher H 2 selectivity up to 69.9% than that of 2Ni0.5Pt/S-1 (64.4%), owing to suppressed methanation reaction based on subnanometric clusters. Shape-selective steam reforming of n -dodecane and ofm -xylene was also observed, because of m -xylene could hardly diffuse into the zeolite channels due to its bulky molecular size, further preventing potential deactivation by tars in reforming process.
✓ 已验证
DOI
高影响因子
JOURNAL OF CHEMICAL AND ENGINEERING DATA
·
2021
·
IF 2.694
JinTao He,XueMan Xu,Xia Gui
New phase equilibrium data of CO2 in n-hexadecane, n-heptadecane, n-octadecane, n-nonadecane, and n-eicosane were measured at temperatures from 333.15 to 373.15 K up to 23.73 MPa by a constant-volume method. Thermodynamic properties of Gibbs free energy (ΔsolG), enthalpy change (ΔsolH), entropy change (ΔsolS), and Henry’s coefficient (H) were calculated and analyzed for elucidating the dissolution mechanism of CO2 in alkanes. Results showed that the CO2 solubility increased with increasing pressure but decreased with increasing temperature and carbon number. In addition, increasing carbon number also led to an increase in the minimum miscibility pressure (MMP) of alkanes with CO2 and thus limited CO2 solubility in alkanes.
✓ 已验证
DOI
高影响因子
CHINESE JOURNAL OF CATALYSIS
·
2021
·
IF 8.271
Juan Xiao,Junwei Chen,Zuqiao Ou,Junhang Lai,Tongwen Yu,Yi Wang
Herein, the application of a N-doped graphitic-carbon-coated iron nitride composite dispersed in a N-doped carbon framework (Fe 3 N@NG/NC) is investigated as a heterogeneous electro-Fenton (HE-EF) catalyst for the efficient removal of organics. The simultaneous carbonization and ammonia etching of iron-based metal organic framework (Fe-MOF) materials yielded well-dispersed N-doped carbon-coated Fe 3 N nanoparticles with a diameter of ~70 nm. The Fe 3 N and pyridinic N endowed the composite with high HE-EF activity for decomposing the electrogenerated H 2 O 2 to • OH. The Fe 3 N@NG/NC exhibited outstanding HE-EF performance in removing various organic pollutants with low iron leaching. A removal rate of 97–100% could be obtained for rhodamine B (RhB), dimethyl phthalate , methylene blue , and orange II in 120 min at a pH of 5.0. When the solution pH was set to 3.0, 5.0, 7.0, and 9.0, the removal rate of RhB reached 100%, 96%, 92%, and 81%, respectively, in 60 min at an optimum voltage of 0.0 V ( vs. reversible hydrogen electrode (RHE)). Moreover, the concentration of leached iron was expected to be below 0.03 mg/L in a wide pH range of 3.0–9.0. In addition, the RhB removal efficiency remained as high as 90% after six cycles in the reusability experiments. This work highlights the MOF-derived Fe 3 N composite as an efficient HE-EF catalyst and the corresponding catalytic mechanism, which facilitates its application in wastewater treatment .
✓ 已验证
DOI
高影响因子
PROCESS SAFETY AND ENVIRONMENTAL PROTECTION
·
2022
·
IF 7.926
Yuansi Hu,Xinglong Chen,Shiqi Mu,Qibin Li
Oil-based drilling cuttings (OBDC) have a high content of petroleum pollutants with strong mutagenic, carcinogenic and teratogenic properties. Solvent extraction can effectively separate petroleum pollutants from OBDC. However, single solvent has preferred solubility for different types of petroleum pollutants in OBDC, resulting in a lower oil removal efficiency. Therefore, based on the polarity difference between methanol (Me) and n-hexane (He), a method was developed to extract petroleum pollutants from OBDC using Me&He. Compared with methanol or n-hexane alone, the oil removal efficiency of compound Me&He was significantly increased to 94.58 %, and 37, 37 and 77 petroleum pollutants were extracted using Single methanol, Single n-hexane and Compound Me&He, respectively. Methanol extraction preferentially solubilised polar molecules such as alcohols and carboxylic acids , while n-hexane extraction preferentially solubilised alkanes and other nonpolar molecules. Compound Me&He compensated for the low solubility of single solvents for petroleum pollutant extraction from OBDC. Additionally, because methanol and n-hexane are not mutually soluble, it was easy to separate the recycled components. Compared with other common solvent extraction technologies, compound Me&He had advantages including simple operation and high oil removal efficiency. This study provided a theoretical basis and technical reference for the efficient processing and resource recycling of OBDC.
✓ 已验证
DOI
高影响因子
SENSORS AND ACTUATORS B-CHEMICAL
·
2021
·
IF 7.46
Weiwei Guo,Yuting Shuai,Xuecheng Liu,Jie Zhang,Jiang Wang,Khaled H. Mahmoud,Zeinhom M. El-Bahy,N.M. Mubarak
N-butanol, a poisonous and flammable liquid, has great threat to human life and property security, which is of importance to monitor n-butanol in the environment. In this paper, the pure and Co-doped BiVO 4 polyhedrons are successfully synthesized by hydrothermal method . A series of characterizations, such as XRD , XPS, SEM, UV, and EIS, etc., are used to analyze the crystal structure, morphology, element compositions , optical and electrochemical properties of the as-prepared samples. The optimal sample (3Co-BiVO 4 ) exhibits high gas response (51.65) toward 100 ppm n-butanol, which is around four times higher than that of pure BiVO 4 at 300 °C. In addition, the 3Co-BiVO 4 also has fast response-recovery time, good humidity resistance, favorable selectivity to n-butanol, etc. Based on the above characterizations and gas sensing test results, the enhanced gas sensing mechanism for 3Co-BiVO 4 is proposed. This work provides a feasible strategy to fabricate BiVO 4 polyhedron by doping Co to greatly enhance the gas sensing properties for n-butanol.
✓ 已验证
DOI
高影响因子
JOURNAL OF MOLECULAR STRUCTURE
·
2024
·
IF 4
Zahid Nawaz,Nevin Gürbüz,Muhammad Naveed Zafar,Muhammad Nawaz Tahir,İsmail Özdemir,Ryan J. Trovitch
A mild catalytic protocol for aldehyde, amine, and alkyne coupling (A 3 -coupling) allows for the selective synthesis of propargyl amines using 5,6-dimethylbenzimidazole-derived N-heterocyclic carbene (BNHC) silver(I) catalysts. A series of BNHC Ag(Ⅰ) halide complexes were synthesized and their structures have been elucidated through the use of multinuclear NMR and FT-IR spectroscopy. Furthermore, the pseudo-linear geometry of two different compounds was substantiated by single-crystal X-ray diffraction. Silver-based A 3 -coupling was achieved for both acyclic and cyclic secondary amines using a diverse set of alkynes to afford propargyl amines with yields of up to 95 %. The present approach is environmentally benign and water is generated as the sole byproduct.
✓ 已验证
DOI
高影响因子
ENERGY
·
2019
·
IF 5.537
Lin Long,Weixing Zhou,Yunfeng Qiu,Zhenzhong Lan
Endothermic hydrocarbon fuel of active thermal protection has great potential in cooling system. The bottlenecks for the practical application are the unsatisfied heat sink and severe coking issue. Here, NiO nanoparticle/nanosheet hybrid thin layers were successfully wrapped on the commercial HZSM-5 (denoted as ZSM-5@Ni M ), and showing significant modulation ability for the acidity properties of HZSM-5 to boost supercritical cracking of n-decane. The as-prepared catalysts make the NiO and HZSM-5 show synergistic effect which dramatically lowers the overall acidity of composite, thus changes the cracking path of n-decane, and results in effective anti-coking properties. ZSM-5@Ni M decelerated many additional free radicals and generated more gases products by monomolecular beta cleavage reaction. Gases products also show positively correlating with the heat sink. The catalysts improve the heat sink of n-decane from 3.77 MJ/kg at 728 °C to 4.59 MJ/kg at 780 °C. Present work demonstrates that the introduction of nanostructured metal oxides into HZSM-5 will synergistically adjust the acidity of composite, leading to the manipulation of catalytic cracking path and extent, gas products, heat sink, coking behavior of supercritical n-decane, finally providing deep insights for the design and fabrication of catalysts for hydrocarbon fuel cracking.
✓ 已验证
DOI
高影响因子
ACS Applied Nano Materials
·
2020
·
IF 0
Yixiang Pan,Xiaoyan Wang,Jianguo Lu,Qing Yan,Weiyong Yuan,Chang Ming Li
Metal–organic complex (MOC) multilayers are, for the first time, conformally constructed on Ni foam (NF) via a three-component sequential layer-by-layer (LbL) self-assembly approach and converted to three-dimensional (3-D) NF-supported interconnected CoO nanoparticles (NPs)/N-doped carbon nanohybrid multilayers via calcination. The obtained nanoarchitecture delivers an overpotential of 318 mV to achieve 10 mA cm–2 and a Tafel slope of 46.1 mV dec–1. This activity is superior to most reported oxygen evolution reaction (OER) catalysts, and even much better than those of Ir- and Ru-based ones measured under the same conditions (0.1 M KOH). Additionally, this electrode undergoes negligible potential and current change after 19.8 h chronopotentiometric measurement and 300 cyclic voltammetry cycles. The outstanding catalytic performance is mainly attributed to the ultrasmall and high-density CoO NPs embedded in N-doped carbon uniformly assembled on the 3-D substrate significantly increasing electrochemically accessible active sites and durability and the N-doped carbon greatly promoting intrinsic activity of CoO. This work not only creates 3-D highly tunable networked nanostructured electrodes with excellent durability for high-efficiency electrocatalysis but also develops a facile, economical, and extremely versatile strategy to controllably self-assemble conformal MOC-based multilayers with multifunctionality and superior performance on essentially any substrate at the molecular level for broad applications.
✓ 已验证
DOI
JOURNAL OF THE ELECTROCHEMICAL SOCIETY
·
2021
·Vol. 168
·期 6
·066514
·
IF 4.316
Xiaopeng Liu,Yan Liu,Yun Wang,Dingzhong Yuan,Jinbiao Liu,zuqing Zhu
Polyphosphazene, as a precursor, was synthesized by ultrasonication using 4,4-diaminodiphenyl ether and hexachlorocyclotriphosphazene (HCCP). It was carbonized and functionalized at high temperature to obtain carboxylic acid functionalized N, P co-doped carbon materials (denoted as NPCs-COOH). The structure of NPCs-COOH was characterized by Fourier Transform Infrared Spectroscopy (FTIR), Scanning Electron Microscopy (SEM), X-ray photoelectron spectroscopy (XPS), X-ray diffractometry (XRD), Raman spectrometry (Raman), Thermogravimetric analysis (TG) and N2 adsorption-desorption isotherm (BET). The electrosorption properties were explored under different pH values, applied potentials, initial concentrations and contact time. The optimal pH for electrosorption was 5.0 while the equilibrium time was 30 min. The maximum electrosorption capacity from the experiments towards U(VI) was about 551.46 mg g−1 under the most suitable applied potential of 0.9 V, which was much higher than other carbon materials. Meanwhile, it also showed excellent recyclability with a 23.3% reduction of electrosorption capacity after six cycles. A plausible mechanism of electrosorption was presented using XPS analysis. The results showed the N, P co-doped NPCs-COOH can be used in the electrosorption field to remove U(VI) effectively in solution.
✓ 已验证
DOI
高影响因子