文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第3217至3228个,产品总数4,428个

切换升序
Ni
NEW JOURNAL OF CHEMISTRY · 2026 · IF 2.6

Effect of Mo doping on electrochemical Performance of Li(Ni 0.6 Mn 0.4 ) 1-x Mo x O 2 cathodes

Xingbo Qi,Lei Ni,Ziyan He,Xu Sun,Hejie Lu,Haiqiang Li,Ruixi Meng,Maosen Fu,Xiao Ma

Cobalt-free, nickel-rich layered oxide cathode material LiNixMn1-xO2 (NM) has attracted much attention due to its high specific capacity and low cost. However, cobalt-free cathode materials have more serious problems such as Li/Ni disorder and structural degradation compared to ternary LiNixCOyMn1-x-yO2 (x ≥0.5, NCM) cathodes. To address these challenges, LiNi0.6Mn0.4O2 (NM64) and a series of Mo-doped Li(Ni0.6Mn0.4)(1-x)MoxO2 (x = 0, 0.01, 0.02, 0.03, 0.04, 0.05) cathode materials were designed and prepared by high-temperature solid-phase method, and the effect of Mo doping on the structure and electrochemical performance of NM64 cathodes was systematically investigated. Mo doping not only suppresses Li/Ni mixing and enlarges interlayer spacing but also effectively inhibits primary particle overgrowth, resulting in refined particle morphology that enhances structural stability and Li+ transport kinetics. Consequently, the Mo-doped NMM cathodes exhibit more stable interface with significantly suppressed side reactions. Li(Ni0.6Mn0.4)0.98Mo0.02O2 cathode exhibited superior capacity retention of 86.83% after 100 cycles at 1.0 C (at 25℃ and 2.8-4.3 V), surpassing the NM matrix by 8.98% and demonstrating the remarkable cycling stability improvement. This work elucidates the structural and interfacial stabilization mechanisms induced by high-valent Mo doping, providing an effective approach to developing high-performance Co-free layered oxide cathodes.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Journal of Materials Chemistry A · 2026 · IF 9.2

Fe-Assisted Nitridation-Induced Reconstruction of Mo-Fe-Ni Molybdates Enables Durable Alkaline Seawater Oxygen Evolution and Zn-Air Batteries

Hamza M. Haruna,Yanxiang He,Zhixiao Zhu,Hao Yang,Selvam Mathi,Guanhua Zhang,Zhongmin Wang,M. Sadeeq Balogun

Controlling phase evolution during nitridation is essential for creating active interfaces in multi-metal electrocatalysts. However, the nitridation pathways in complex systems such as Mo-Fe-Ni molybdates remain poorly defined. Herein, tuning the Fe contents in the Fe-Mo precursor directly governs ammonia activation and drives nitridation-induced reconstruction. Increasing Fe concentration promotes NH3 decomposition, shifting the product from an oxide-rich phase (N-doped MoO2-FeMoO4-NiMoO4-NiO, denoted N/MoO2-MoFeNi-O) to a nitride-dominated heterostructure comprising MoO2, Mo2N, FeN and Ni4N (N/MoO2-MoFeNi-N). The optmized N/MoO2-MoFeNi-N nitride-oxide interfaces enhance electrical conductivity, optimize oxygen-intermediate adsorption, and improve corrosion resistance. As a result, N/MoO2-MoFeNi-N exhibits superior oxygen evolution performance in both alkaline freshwater and seawater, requiring overpotentials of only 309/392 and 334/499 mV to reach 500 and 1000 mA cm-2, respectively. DFT calculations identify the MoO2@FeN interface is the most active site with the lowest energetic barrier for the potential-limiting step. The catalyst also demonstrates efficient oxygen reduction activity, enabling high-performance zinc-air batteries with open-circuit voltage of 1.33 V, peak power density of 84.2 mW cm-2, and stable cycling over 140 h. This work clarifies the role of Fe in directing nitridation pathways, providing a rational route to construct durable, interface-rich nitride-oxide architectures for advanced oxygen atalysis.

CAS / MDL: 12054-85-2
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
INORGANIC CHEMISTRY COMMUNICATIONS · 2026 · IF 5.9

N-coordination tuned Niδ+ sites in Ni@C/g-C₃N₄ catalyst enables efficient hydrogenolysis of lignite under mild conditions

Zongsheng Chen,Yanxi Ma,Hui Kang,Ting Liu,Hao Song,Ludan Chen,Yingluo He

The development of highly active catalysts for the catalytic conversion of oxygen-containing aromatics in lignite under mild conditions is of crucial importance for the production of clean liquid fuels. In this study, an in situ nitrogen-doped carbon-coated Ni@C/g-C 3 N 4 catalyst was fabricated. The abundant lone-pair electrons on nitrogen atoms within the g-C 3 N 4 support can coordinate with nickel, facilitating the migration of electrons toward the nickel surface. This electron transfer process favors the formation of Ni δ+ active sites with low electron cloud density, thereby enhancing the hydrogenation catalytic activity of the catalyst. The catalyst exhibited exceptional performance in lignite hydrodeoxygenation (HDO): under conditions of 80 °C, 1.5 MPa H 2 , and a reaction time of 1.5 h, 100% conversion of the lignite model compound benzyl phenyl ether (BOB) was achieved. Furthermore, the catalyst demonstrated remarkable hydrodeoxygenation activity, with high selectivity toward various oxygen-containing model compounds, including methyl nonanoate and 2,6-dimethylphenol. The optimal catalyst was applied to the catalytic conversion of the soluble portion (SP) of Naomaohu coal (NMHC). Results indicated that, compared with the SP, the hydrogenated soluble products from catalytic hydrogenation conversion (SP CHC ) showed a significant increase in the variety and quantity of aromatic and alkane compounds, while the relative contents of phenols, alcohols, esters, and ethers were reduced. These findings fully confirm that the Ni@C/g-C 3 N 4 catalyst can effectively cleave C C and C O bonds during the hydrogenation conversion of the SP, providing theoretical guidance for the conversion of lignite into high-quality clean liquid fuels.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
IONICS · 2026 ·Vol. 32 ·期 8 ·8731-8740 · IF 3.4

One-step electrodeposition of recycled Ni-Co alloys from spent batteries: a sustainable route to high-performance water oxidation catalysts

Xiu Xuezheng,Chen Wenxue,Zhang Yanjia,Han Lina,Tan Haotian,Gao Yuqian,Wang Jinlin,Gao Hongfu,Li Yanan,Zeng Xiaoyuan

The recovery and reuse of metals from electronic waste for catalyst preparation represents a promising strategy for addressing both energy crises and environmental pollution. In this study, nickel and cobalt were extracted from spent lithium-ion battery powder using a deep eutectic solvent, and the leachate was directly converted into an oxygen evolution reaction (OER) catalyst through electrodeposition without intermediate purification steps. The catalyst structure and electrochemical performance were systematically characterized. TEM/EDS confirmed the uniform distribution of nickel-cobalt alloy nanoparticles on carbon paper. Electrochemical measurements in 1 M potassium hydroxide electrolyte demonstrated that the optimized Ni x Co y (ox)(H 2 O) 2 /CP catalyst achieved overpotentials of 328 mV, 353 mV, and 375 mV at current densities of 10 mA cm⁻ 2 , respectively. The best-performing sample, Ni 5 Co 5 (ox)(H 2 O) 2 /CP-(-50)-30, exhibited catalytic activity approaching that of RuO 2 on the same substrate (303 mV overpotential), indicating significant potential for water splitting applications. Furthermore, the catalyst maintained 97% of its initial current density after 80 h of continuous OER operation, demonstrating excellent long-term stability. Graphical abstract

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS · 2026 · IF 6.7

Stabilizing single-atom Ni on an Al2O3/N-C composite for efficient H2 production from polypropylene via pyrolysis-catalytic reforming

Dexin Kong,Rui Shan,Shuxiao Wang,Huan Li,Haoran Yuan,Yong Chen

Converting plastic waste into hydrogen provides a promising route to simultaneously address environmental pollution and clean energy production. This study developed a Ni single-atom catalyst stabilized on an Al 2 O 3 /N-C composite support (Ni@Al 2 O 3 /N-C) for H 2 production from polypropylene (PP) via pyrolysis-catalytic reforming. The composite support integrates the high-temperature structural stability of Al 2 O 3 with the strong anchoring capability of N-doped carbon, enabling the formation of stable C-N-Ni active sites and effectively suppressing Ni aggregation under harsh reforming conditions. Under the optimal conditions (catalyst/PP = 1.25:1, water feed = 6 mL h −1 ), the catalyst achieved a gas yield of 127.59 mmol g −1 PP, a hydrogen yield of 84.14 mmol g −1 PP, and a hydrogen selectivity of 65.96%. The catalyst maintained good cyclic performance over 10 consecutive runs, with the H 2 yield decreasing from 84.14 to 69.39 mmol g −1 PP while the H 2 selectivity remained at 64.49% in the 10th cycle. XPS, HAADF-STEM, XRD, Raman, SEM, and TEM analyses confirmed that Ni remained atomically dispersed on the support after reaction, with no obvious nanoparticle agglomeration and only limited carbon nanotube formation. This work provides an effective support-engineering strategy for designing thermally stable single-atom catalysts for plastic reforming and other high-temperature catalytic processes.

CAS / MDL: 1336-21-6 7784-27-2
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Journal of Cleaner Production · 2026 · IF 10.7

In-situ hydrogen generation via water-gas shift reaction over Ni-Fe3O4/USY: A sustainable pathway for efficient polypropylene hydrogenolysis

Zheng Zhang,Ying Yang,Jiayi Zhang,Yunyi Zhang,Xiaohan Jin,Xiaoqi Zhang,Luna Niu,He Liu,Aijun Guo

The escalating crisis of global plastic pollution underscores an urgent need for truly sustainable and closed-loop technological solutions. While chemical recycling presents a promising route, its current reliance on fossil-derived hydrogen fundamentally undermines the process's environmental rationale. Herein, an innovative cascade catalytic system is introduced that directly addresses this challenge by employing the water-gas shift reaction (WGSR) as an in-situ hydrogen source. This integrated strategy enables the efficient conversion of polypropylene (PP) waste into high-value liquid fuels (C 5 -C 22 ). The process is driven by a rationally designed bifunctional catalyst, Ni-Fe 3 O 4 /USY. The reducible Fe 3 O 4 continuously generates active hydrogen species through the WGSR, while Ni finely tunes the redox properties required for CO activation. Concurrently, the acidic sites of the USY zeolite facilitate the selective cleavage of C-C bonds in the polymer chain. The results show that the well-designed tandem reaction achieves >99% conversion of post-consumer PP waste and a remarkably high liquid fuel yield of 83.2% under relatively mild conditions (340 °C). This study establishes a green and intensified pathway for plastic valorization, fundamentally circumventing the dependency on external fossil-based hydrogen and paving the way for more sustainable chemical recycling paradigms.

CAS / MDL: 13478-00-7 7782-61-8
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
APPLIED CATALYSIS B-ENVIRONMENTAL · 2026 · IF 19.7

Mechanistic switching in carbon paper supported Fe, Ni, and Mn-doped CoP nanosheets for efficient OER via DHS-OPM pathway

Muhammad Rafiq,Sami Ur Rahman,Wenjuan Xu,Shehna Farooq,Jiangyan Dang,Muhammad Saad,Omme Habiba Abbasi,Adel Al-Salihy,Wenliang Li,Jingping Zhang

Fe@CoP-NSs/CP is synthesized and shows superior OER activity (272 mV at 10 mA cm⁻²). • DFT reveals Fe doping optimizes the d -band center (-1.92 eV) and adsorption energetics of Fe@CoP-NSs/CP. • DHS-OPM on Fe-Co sites of Fe@CoP-NSs/CP achieves a low overpotential of 0.35 V, outperforming AEM. • Fe@CoP-NSs/CP exhibits excellent stability over 30 h tested by chronoamperometry. • Machine learning identifies TM-OOH* and RDS as key predictors of catalytic efficiency (ROC-AUC up to 0.99). The oxygen evolution reaction (OER) remains a critical bottleneck for efficient oxygen production via water splitting due to its sluggish kinetics and high overpotential. Herein, we systematically investigated the OER mechanism on 3d transition metal-doped (Iron, Nickle, and Manganese) and pristine cobalt phosphide nanosheet carbon paper supported (Fe@CoP-NSs/CP, Ni@CoP-NSs/CP, Mn@CoP-NSs/CP, and CoP-NSs/CP) through a density functional theory (DFT) and experimental approach. The DFT calculations reveal that doping modulates the electronic structure of Fe@CoP-NSs/CP among the investigated systems exhibiting a d-band center closest to the Fermi level (-1.92 eV), leading to optimized adsorption energetics for key intermediates. Mechanistic mapping identifies the Dual Hetero-Site Oxide Path Mechanism (DHS-OPM) as the dominant pathway. In this mechanism, Fe-Co bimetallic sites achieve a remarkably low overpotential of 0.35 V, significantly outperforming the Adsorbate Evolution Mechanism (AEM). Experimentally, Fe@CoP-NSs/CP shows superior OER activity with an overpotential of 272 mV at 10 mA cm −2 and a Tafel slope of 47.4 mV dec −1 , with excellent stability over 30 h. Furthermore, supervised machine learning identifies TM-OOH* and rate-determining step (RDS) energies as the key predictors of catalytic efficiency, achieving ROC-AUC values up to 0.99. This work establishes a DFT-driven mechanistic framework, demonstrating that Fe@CoP-NSs/CP provides a highly efficient and durable pathway for OER. Download: Download high-res image (185KB) Download: Download full-size image

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF ALLOYS AND COMPOUNDS · 2026 · IF 6.7

Integrated in-situ construction of electrode matrix and surface amorphous Ni-Co-Fe LDH catalytic layer for efficient water splitting

Lixin Wang,Renjie Ji,Chunge Wang,Fanbo Meng,Zhongwu Luo,Mengran Wang,Hui Jin,Shijie Yang,Shi’an Zhao,Dahao Han,Yongjie Cheng,Tianyu Liu,Jianmin Ma,Yonghong Liu

To address the limited activity and durability of oxygen evolution reaction (OER) electrocatalysts, we present an integrated in situ strategy for constructing a three-dimensional Ni-Co dendritic electrode matrix coupled with a surface amorphous Ni-Co-Fe layered double hydroxide (LDH) catalytic layer. A Ni-Co dendritic matrix (NCDEM) with enhanced electrolyte accessibility and mass transport properties is first fabricated via jet electrodeposition, followed by the in situ hydrothermal growth of Ni-Co-Fe LDH nanosheets to construct a Ni-Co-Fe dendritic electrode (NCFDE). The introduction of NaBO₂ during the hydrothermal process regulates surface etching kinetics and the Fe³ ⁺ coordination environment, promoting uniform nanosheet growth and triggering the crystalline-to-amorphous transition of the LDH structure. The amorphous LDH layer increases the accessible active surface area, facilitates the formation of reconstructed NiOOH active species during OER, and enhances structural stability during prolonged electrochemical operation. The optimized B2-NCFDE exhibits outstanding OER performance in 1 M KOH, requiring an overpotential of only 215.34 mV to achieve 100 mA cm⁻², with a Tafel slope of 38.29 mV dec⁻¹ and stable operation at 500 mA cm⁻² for 2000 h. Furthermore, the B2-NCFDE||B2-NCFDE electrolyzer achieves 100 mA cm⁻² at a cell voltage of 1.822 V and demonstrates excellent durability for overall water splitting. This work provides a scalable strategy that integrates electrode architecture engineering with amorphous LDH regulation for efficient and durable hydrogen production.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY · 2026 · IF 9.2

Tailoring triple-conductive properties of cobalt-free BaFe0.9Y0.1O3-δ cathode via Ni doping toward high-performance proton ceramic fuel cells

Youcheng Xiao,Zihan Huo,Long Yuan,Tianmin He,Hong Chen,Di Bao,Xiaotian Yang

Proton-conducting fuel cells (PCFCs) operate at reduced temperatures and exhibit broad fuel adaptability. The development of triple-conducting cathodes has been demonstrated as an effective approach to enhance electrochemical performance. Nowadays, the low-cost iron-based BaFeO 3- δ perovskite has attracted attention due to its favorable mixed conductivity and ORR activity, yet intrinsic lattice distortion impedes ion transport and limits its practical application in PCFC. Herein, a series of Y/Ni co-doped cobalt-free BaFe 0.9- x Y 0.1 Ni x O 3- δ perovskites are systematically designed and investigated as novel triple-conducting (H + /O 2− /e − ) PCFC cathodes via synergistic cation co-doping. Among the prepared samples, BFYNi 0.15 exhibits an enriched concentration of oxygen vacancies, enhanced hydration capacity, and superior triple conductivity, delivering a low polarization resistance of 0.41 Ω cm 2 in humid air at 700 °C. When coupled with a BaZr 0.4 Ce 0.4 Y 0.15 Zn 0.05 O 3- δ electrolyte, the corresponding single cell achieves a peak power density of 548 mW cm −2 at 700 °C and maintains stable operation.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH · 2026 · IF 3.9

Tuning Ni/Hβ Catalysts via Second-Metal (Zn, Fe, and Cu) Incorporation for Selective Hydrogen-Free Hydrodeoxygenation of 4-Propylguaiacol

Bao Zien,Ren Xiaohong,Rong Zeming

The selective upgrading of lignin-derived compounds into high-value chemicals remains a critical challenge. In this study, a series of Ni-based catalysts supported on Hβ zeolite and modified with secondary metals (Zn, Fe, and Cu) were synthesized and systematically evaluated for the catalytic conversion of 4-propylguaiacol in aqueous phase under hydrogen-free conditions. Among the catalysts studied at 220 ° C for 2 h, Ni/Hβ delivered a conversion of 36.1% and a phenolic selectivity of 89.6%. By comparison, NiZn/Hβ exhibited the highest catalytic activity, achieving a conversion of 82.9% with a selectivity of 96.5%, indicating the promotional effect of Zn incorporation. NiFe/Hβ showed a moderate conversion of 45.5% but maintained a high phenolic selectivity of 97.6%. However, NiCu/Hβ showed almost no catalytic activity, with a conversion of only 2.0%. Structural characterization by XRD, XPS, N 2 physisorption, H 2 -TPR, SEM, and TEM revealed that the introduction of Zn significantly improved the dispersion of Ni species and reduced Ni crystallite size, thereby increasing the number of accessible active sites. In contrast, Fe incorporation altered the catalyst structure and reduced catalytic activity, while Cu addition induced metal aggregation and markedly suppressed catalytic performance. The results indicate that appropriate second-metal modification can effectively regulate the metal dispersion, microstructure, and metal–support interactions in Ni/Hβ catalysts, thereby influencing the hydrogen activation ability and the cleavage of Ar–CO 3 bonds.

CAS / MDL: 2785-87-7 645-56-7
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING SCIENCE · 2026 · IF 5.1

High dispersion strategy of Ni species on the TEA-grafting surfaces of the lamellar clinoptilolite for enhancing CH4-CO2 reforming

Ruohan Xu,Ming Liu,Tallat Munir,Shiyang Bai,Jihong Sun,Haoqian Guo,Zhongchao Sun,Xiaoyan Bai

This study explores the preparation of the Ni-based catalysts supported on clinoptilolite (CP) for dry reforming of methane (DRM) using three methods: impregnation, complex route, and one-pot synthesis. The impact of these strategies on Ni dispersion and catalytic performance was investigated. Triethylamine was utilized as a complexing agent to improve Ni dispersion, prevent catalyst sintering, and reduce carbon deposition. The physicochemical properties were characterized using X-ray diffraction patterns, Fourier transform infrared spectroscopy, Raman spectra, and X-ray photoelectron spectroscopy spectra, N 2 adsorption–desorption isotherms, scanning electron microscopy and transmission electron microscopy images, hydrogen temperature-programmed reduction and thermogravimetric analysis. The results indicate that the CP-TEA/4Ni catalyst prepared via the complex route exhibited a higher Ni content (2.84 wt%) and demonstrated the highest initial activity at 600 °C (44.5% CH 4 conversion, 43.4% CO 2 conversion). Conversely, the (3NiTEA)CP catalyst synthesized via the one-pot method confined Ni particles within the microporous structures of CP, significantly suppressing carbon deposition and Ni particle growth, and thereby ensuring exceptional stability (105 h at 600 °C). The amorphous and graphitic carbon deposition coexisted in the deactivated catalysts, whereas the I D /I G value of the deactivated CP/TEA-3Ni was higher. Furthermore, Grand Canonical Monte Carlo-Molecular Dynamics coupled simulations revealed that surface Ni clusters were conducive to enhancing CH 4 adsorption heat and facilitating CO 2 diffusion, which effectively inhibited carbon deposition. These findings underscore the role of synthetic strategies in designing high-performance Ni-based catalysts for DRM reaction, offering pathways to more cost-effective, stable, and efficient catalysts for industrial methane reforming and carbon emission reduction.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
APPLIED SURFACE SCIENCE · 2026 · IF 6.6

Ni/MoO2 heterostructure catalyst with synergistic active sites for efficient alkaline hydrogen evolution reaction: From active sites to intrinsic kinetics

Fengli Wang,Zechu Deng,Lishuang Wei,Ning Liu,Chengna Dai,Biaohua Chen

One-step hydrothermal synthesis of cost-effective Ni/MoO 2 catalyst. • Kinetic model enables reliable reaction dynamics quantification. • Ni/MoO 2 shows exceptional HER activity with η 10 of 104 mV. • MoO 2 lowers H 2 O dissociation barrier, Ni promotes OH desorption. Facing the energy crisis and carbon neutrality demands, electrolytic green hydrogen is a key energy transition focus. This work developed a non-noble Ni/MoO 2 catalyst for alkaline hydrogen evolution reaction (HER), delivering 104 mV overpotential (10 mA cm −2 ) and 115.1 mV dec −1 Tafel slope. This is closely related to the Ni/MoO 2 heterostructure. MoO 2 acts as an efficient H 2 O dissociation active site (Δ G  = 0.16 eV), while Ni nanoclusters facilitate OH* desorption, reducing Δ G OH* from 0.21 eV (sole MoO 2 site) to 0.13 eV (synergized by Ni nanocluster). Regarding the H* intermediate, it exhibits comparable Δ G H* values (0.34 eV on MoO 2 and 0.36 eV on Ni/MoO 2 ), indicating H* directly evolves into H 2 over MoO 2 . Furthermore, intrinsic reaction kinetics were systematically studied at 20–40 °C, and an intrinsic kinetic model was established. This model can effectively predict elementary reaction rates and provides key kinetic data for future anion exchange membrane water electrolyzers (AEMWEs) design. Download: Download high-res image (275KB) Download: Download full-size image

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。