SURFACE & COATINGS TECHNOLOGY
·
2024
·
IF 5.3
Zhaoyang Zheng,Dong Han,Tianyu Zhang,An Du,Ruina Ma,Yongzhe Fan,Xue Zhao,Xiaoming Cao
The Co-depletion zone in WC–Co brazed joints is the main zone of joint failure, so it is crucial to explore novel processes to inhibit the Co-depletion zone and enhance the joint shear strength. In this study, a composite process of pre-plating Cu on the WC–Co surface + brazing was designed. Co-depletion zone reduces from 6 μm to 1 μm due to the Cu plating. Meanwhile, the formation of a plating fusion zone in the filler layer transforms TiCo with a thickness of 2.5 μm into a small number of TiCo particles. Moreover, the high concentration of Cu atoms in the vicinity of the WC particles at the interface changes the Co-segregation layer in the WC into a Cu-rich layer. The concentration of Cu in the filler layer leading to precipitation of TiCu and Ti 2 Cu particles. Ti 2 Cu particles encapsulated by ductile Ag–Cu–In ternary eutectic contribute to inhibit the cracks propagation. The shear strength of the joints was enhanced by 51.3 % to 295 MPa. The composite process of pre-plating on the base material surface + brazing has positive significance in inhibiting the excessive diffusion of elements from the base materials to the filler layer.
✓ 已验证
产品关联
DOI
高影响因子
NEW JOURNAL OF CHEMISTRY
·
2022
·Vol. 46
·期 31
·15192-15199
·
IF 3.925
Zhihui Rao,Zhilin Li,Xiujian Zhao,Xiao Gong
Cs2AgInCl6 lead-free double perovskites are environmentally benign with easily modulated fluorescence. However, their wide band gap (∼3.3 eV) and forbidden optical transitions limit their visible application. Herein, we prepared Cs2AgInCl6 microcrystals (MCs) and corresponding doped samples (bismuth: Bi3+, samarium: Sm3+, and Bi3+–Sm3+) to achieve such a functionality by a precipitation method at low temperature (80 °C). Bi3+-doped Cs2AgInCl6 MCs introduce 1S0 to 1P1 absorption with a fluorescence enhancement at lower excitation energy (370 nm). Although the f–f transition of Sm3+ is parity forbidden, Bi3+–Sm3+ co-doped Cs2AgInCl6 MCs show a combination of luminescence in the visible range with two sharp additional spectral features at 567 and 600 nm, which are attributed to the 4G5/2 → 6H5/2 (∼567 nm) and 4G5/2 → 6H7/2 (∼600 nm) transitions of Sm3+ ions. We proposed a mechanism in which Cs2AgInCl6:Bi–Sm MCs achieve mutual enhancement of fluorescence through recombination of self-trapped excitons and energy-transfer transitions. Moreover, thermogravimetric (TG) analysis indicated that the materials have remarkable thermal stability. Afterwards, light-emitting diodes (LEDs) with bright yellow light were fabricated by combining Cs2AgInCl6:Bi–Sm MCs with a 365 nm chip, and the corresponding color coordinate is about (0.535, 0.440) with a 2000 K correlated color temperature (CCT).
研究领域:
材料科学
·
光学
✓ 已验证
DOI
高影响因子
Journal of Materials Research and Technology-JMR&T
·
2026
·
IF 7.3
Lei Wang,Zekun Liu,Han Zhang,Pengfei Xu,Zhihao Liu,Bo Wang,Fei Ding,Jiadai Xue,Langping Wang,Yanji yang,Yong Chen,Yupeng Xu,Dianlong Wang,Bo Wang
Achieving near-zero internal stress without sacrificing strength remains a key challenge in Ni-based electroforming. Here, a Co/BSA co-regulation strategy is developed using benzenesulfonamide (BSA) as a dual-functional additive. Theoretical calculations and electrochemical measurements show that the benzene ring promotes interfacial adsorption, while activation of the sulfonamide group facilitates S incorporation, shifting the internal stress from tensile to compressive. Dynamic BSA adsorption suppresses lateral and through-thickness grain growth, promotes nucleation, and drives the transition from columnar grains to refined equiaxed grains. Meanwhile, facet-dependent BSA adsorption drives a concentration-dependent texture transition by shifting the deposition mode from grain-growth-dominated at low BSA concentrations to nucleation-dominated at high concentrations, favoring (200)- and (111)-oriented grains, respectively. The resulting texture evolution and S segregation cause a mismatch between the low-stress and high-hardness windows. To overcome this trade-off, Co is introduced for synergistic regulation. Co incorporation provides tensile-stress compensation and solid-solution strengthening, shifting the near-zero-stress state toward the high-strength region. Consequently, Co/BSA co-regulation enables the fabrication of near-zero-stress Ni-Co deposits with a hardness of 549.3 HV 0.1 and a tensile strength of 1598.2 MPa. This work provides a strategy for designing low-stress and high-strength electroformed Ni-based materials.
✓ 已验证
DOI
高影响因子
JOURNAL OF THE AMERICAN CERAMIC SOCIETY
·
2025
·
IF 3.8
Siyuan Wang,Wei Cai,Dongsheng Shi,Jingwu Zheng,Liang Qiao,Haibo Chen,Naoki Wakiya,Naonori Sakamoto,Takahiko Kawaguchi,Shenglei Che
High-performance SrFe 12 O 19 meets the current demands for lightweight and high-efficiency devices. In this study, Sm‒(Co/Zn/Ca) co-doped spherical SrFe 12 O 19 powders were synthesized via ultrasonic spray pyrolysis. This approach overcomes the limitation of single Sm doping in M-type strontium ferrite, which enhances coercivity but decreases saturation magnetization. The effects of co-doping on the structural and magnetic properties of the material were systematically investigated using X-ray diffraction, Raman spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy, Brunauer–Emmett–Teller, Mössbauer spectroscopy, and both room-temperature and low-temperature vibrating sample magnetometry (VSM). Among all the synthesized samples, SrSm 0.20 Zn 0.05 Fe 11.75 O 19 exhibited the highest saturation magnetization ( M s = 78.983 emu/g) while maintaining a coercivity of 7.097 kOe. Compared to SrSm 0.20 Fe 11.80 O 19 , Sm‒Zn co-doping resulted in a 20.12% increase in M s with only a 0.42% reduction in H cj . The results indicate that Zn 2+ preferentially substitutes Fe 3+ at the 4f 2 spin-down sites, reducing the contribution of reverse magnetic moments and thereby enhancing M s . Additionally, as a non-magnetic ion, Zn 2+ does not disrupt Fe‒O‒Fe super-exchange interactions, leading to a minimal reduction in H cj . In contrast, Ca 2+ tends to occupy the 12k and 2a spin-up sites, which reduces spin-up magnetic moments, negatively affecting M s enhancement. Moreover, Co 2+ , being a magnetic ion, disturbs Fe‒O‒Fe super-exchange interactions when incorporated into the SrFe 12 O 19 lattice, leading to a more significant decrease in coercivity. The magneton number ( n B ) calculated from low-temperature VSM confirmed the magnetic moment enhancement effect in the co-doped system, while Mössbauer spectroscopy provided further insights into the hyperfine interactions. This study demonstrates that the Sm‒(Co/Zn/Ca) co-doping strategy effectively balances M s and H cj , significantly improving the magnetic performance of SrFe 12 O 19 . Furthermore, ultrasonic spray pyrolysis proves to be a scalable and cost-effective synthesis method, showing great potential for the large-scale production of high-performance ferrite powders. These findings provide a theoretical foundation for optimizing SrFe 12 O 19 magnetic properties and offer new perspectives for its application in permanent magnet technology.
✓ 已验证
产品关联
DOI
高影响因子
RARE METALS
·
2019
·Vol. 40
·期 1
·90-95
·
IF 1.785
Zhu Ying-Gang,Shang Chao-Qun,Wang Zhen-Yu,Zhang Jian-Qiao,Yang Ming-Yang,Cheng Hua,Lu Zhou-Guang
It is a big challenge to prepare non-rare metal and high-activity
electrocatalysts for oxygen reduction reaction (ORR). In this paper, a cobalt/carbon
nanotubes/chitosan composite gel was synthesized and then annealed under nitrogen
atmosphere to yield the cobalt and nitrogen co-modified carbon nanotubes (Co–N-CNTs)
nanocomposite electrocatalysts. In this strategy, the cobalt component considerably
enhanced the ORR activity and improved the degree of graphitic structure to increase the
electronic conductivity. The chitosan served as sustainable source for nitrogen doping.
The Co–N-CNTs exhibit excellent oxygen reduction reaction (ORR) electrocatalytic
activity due to the synergetic effect of Co species and N-doping. The Co–N-CNTs also
deliver excellent methanol tolerance and superior long-term durability to that of
commercial Pt/C, making it a promising ORR electrocatalyst.
研究领域:
材料科学
·
电化学
·
催化科学
✓ 已验证
DOI
高影响因子
Journal of Macromolecular Science Part B-Physics
·
2021
·
IF 1.504
Meiling Yi,Zhihua Zhou,Wenjuan Liu,Tianlong Huang,Yanmin Zhao,Ping Chen,Ziwei Zhou,Dan Wang,Chao Zhang,Jianjun Fang
Among drug delivery systems, polymer microspheres have been proved to be the most promising carriers during the past several years. In this paper we describe the preparation of poly(L-lactide-co-glycolide-co-ε-caprolactone) (PLLGC) random terpolymer microspheres; their in-vitro degradation behaviors, including the changes of pH value, mass loss, molecular mass and surface morphology, were investigated during various degradation periods and compared with poly(lactic-co-glycolic acid) (PLGA) microspheres. The results showed that the introduction of the ε-caprolactone (ε-CL) unit reduced the degradation rate of the PLGA polymers. Therefore, we suggest the PLLGC microspheres with controllable degradation rate could supply a wider application future in drug delivery field than pure PLGA microspheres.
研究领域:
生物医学工程
·
药剂学
·
高分子科学
·
材料科学
✓ 已验证
DOI
高影响因子
Molecular Catalysis
·
2023
·
IF 4.6
Kexin Huang,Yanxing Hui,Zhongyun Yang,Muhammad Waqas,Fangfang Fan,Limin Wang,Xiaotian Liu,Qiulan Huang,Dujuan Huang,Du-Hong Chen,Youjun Fan,Wei Chen
Electrochemical energy (e.g., fuel cell and metal-air batteries) is featured by large theoretical energy density, high conversion efficiency, safe operation and pollution-free emission. However, the sluggish dynamics of oxygen reduction reaction (ORR) and high cost of noble metals hinder their widespread commercial applications in electrochemical energy devices. Herein, we present a method for the preparation of the N, S co-doped carbon film wrapped Co nanoparticles (Co/NSC) for ORR by aging and then pyrolyzing the mixture of cobalt salt and 1-(p-Toluenesulfonyl)imidazole. The co-doping of N and S facilitates the electron rearrangement of the carbon film, resulting in a rapid electron transfer. The core-shell structure enhances the interaction between N, S co-doped carbon film and Co nanoparticles. These features endow the Co/NSC catalyst an excellent ORR with a half-wave potential of 0.860 V and limiting current density of 6.2 mA cm -2 , besides the superior anti-methanol. The Co/NSC catalyst as the air cathode grants the assembled zinc-air battery high open circuit voltage (1.467 V), large peak power density (156.2 mW cm -2 ), great specific capacity (747.9 mAh g Zn -1 ), and excellent stability. Thus, the prepared Co/NSC catalyst exhibits a promising application in zinc-air battery. This work provides an approach for the synthesis of the carbon-shell coated non-noble metal catalyst and its subsequent applications in oxygen electrocatalysis.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2023
·
IF 6.2
Lingyao Zou,Lu Gan,Wenli Song,Chunying Rong,Lishan Yang,Liping Yu,Zhongyun Ma,Shixun Lian
The rapid development of highly durable electric vehicles has put forward higher requirements for lithium-ion batteries. Li 4 Ti 5 O 12 (LTO) is widely studied owing to its long service life and safety. However, owing to their low electrical conductivity and diffusion, lithium ions have limited practical applications. In this study, Co-Cl co-doped LTO/TiO 2 diphase (LTOT) nanosheets were prepared via the hydrothermal method . The synergistic effect of Co-Cl co-doping reduced the charge-transfer resistance of LTOT and increased the lithium-ion diffusion coefficient , thereby improving the dynamic behavior of the electrode material, which further enhances the rate capability and cycle performance of LTOT. The optimized LTOT:Co-Cl composite exhibited excellent cycle performance and rate capability (the ninth cycle reversible capacities were 253.8, 222.2, 200.1, 185.7, 169.9, 161.3, and 146.3 mAh·g −1 at the current density of 1, 2, 5, 10, 20, 30, and 50 C (1 C = 175 mA·g −1 ) rate, respectively). In addition, LTOT:Co-Cl maintained a capacity of 120 mAh·g −1 after 5000 cycles at 50 C with a retention rate of 83 %, indicating that the average decay rate per cycle is only 0.003 % during the long charge/discharge process.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Energy Materials
·
2023
·
IF 6.4
Wenhan Jia,Hao Wu,Yunxin Zheng,Ziyi Liu,Gaotuo Cai,Jianfeng Wen,Guanghui Hu,Tao Tang,Xinyu Li,Li Jiang,Zhiyong Wang,Ming Li,Haifu Huang
Herein, we demonstrate the enhanced pseudocapacitive performance of a MoS2-based flexible supercapacitor by the co-doping strategy of cations and anions. The MoS2 nanosheet arrays on carbon cloth are directly doped with N and Co atoms through a simple hydrothermal process. The obtained cation and anion co-modified MoS2 (N-Co-MoS2) shows improved electron transport efficiency and enhanced active sites for MoS2. According to the first-principles calculations, N-Co-MoS2 has a unique band structure and high electrical conductivity. As expected, N-Co-MoS2 shows higher capacitive performance with 5072.5 mF cm–2 and a better cycle life (retaining 100% capacitance after 10,000 cycles) than pure MoS2. Furthermore, a solid-state flexible N-Co-MoS2 supercapacitor device is fabricated to demonstrate excellent mechanical stability with a specific capacitance of 3236 mF cm–2 and a stable cycle capacitance of 75.56% after 5000 cycles. In our work, we have provided a reference for preparing MoS2-based materials with good supercapacitive performance.
✓ 已验证
产品关联
DOI
高影响因子
Crystals
·
2022
·Vol. 12
·期 2
·190
·
IF 2.67
Lihong Jia,Wansen Ma,Qianyu Zhuang,Yani Zhang,Jie Dang
Metal ion modification is considered to be an effective way to construct metal oxides with specific physical and chemical properties. In this paper, we prepare a tungsten oxide (WO3) film co-modified by Co-ion and Mo-ion to serve as the electrochromic material through a one-step electrodeposition method. The effect of electrodeposition time on film thickness, surface morphology and electrochromic properties is systematically studied as well. The results show that, compared with pure WO3film, the surface morphology of the tungsten oxide film modified by Co-ion and Mo-ion (WO3: Co, Mo) is significantly different. The Co and Mo co-modified film possesses a higher transmission modulation (58.5% at 600 nm) and rapid switching speed (coloring and bleaching time are 2.7 s and 5.6 s, respectively), low impedance value and excellent cycle stability. The performance enhancement is mainly attributed to the coral-like structure of the membrane, which provides a larger specific surface area, more ion adsorption sites and faster ion diffusion. Therefore, this work provides a fast and low-cost method to prepare tungsten oxide electrochromic films co-modified with cobalt and molybdenum ions. At the same time, it also provides an idea to obtain films with different electrochromic properties by adjusting the film thickness.Keywords:electrochromic;metal ion modification;structure;WO3film
✓ 已验证
产品关联
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2021
·
IF 7.312
Yiqun Chen,Xiaori Huang,Dedong Sun,Hongchao Ma,Guowen Wang,Chun Ma,Jun Hao
In this study, the Fe 3 O 4 /Co 3 [Co(CN) 6 ] 2 composite catalyst was synthesized by co-precipitation method. The morphology and the structure of Fe 3 O 4 /Co 3 [Co(CN) 6 ] 2 composites were characterized by XRD, FTIR, SEM, TEM, EDS, XPS, VSM. The results showed that the removal rate of RhB (10 mg/L) reached 99.5% in 40 min in the 0.4-Fe 3 O 4 /Co 3 [Co(CN) 6 ] 2 (200 mg/L) + PMS (50 mg/L) system with a pseudo first-order degradation rate constant (k) of 0.121 min −1 , which is nearly 2.16 times of that (0.0561 min −1 ) in the Co 3 [Co(CN) 6 ] 2 + PMS system and 18.9 times of that (0.0064 min −1 ) in the Fe 3 O 4 + PMS system. The observed synergistic catalysis between Fe 3 O 4 and Co 3 [Co(CN) 6 ] 2 in Fe 3 O 4 /Co 3 [Co(CN) 6 ] 2 enhanced the degradation of RhB. The electron paramagnetic resonance (EPR) analysis and quenching experiment indicated that SO 4 − and OH played important roles in the degradation process of RhB. A synergistic catalytic mechanism of PMS activation by Fe 3 O 4 /Co 3 [Co(CN) 6 ] 2 , which mainly involves the enhanced Co 2+ /Co 3+ cycle by Fe 2+ donated electrons, was proposed. In summary, owing to its easy preparation, excellent catalytic activity, and reusability, the Fe 3 O 4 /Co 3 [Co(CN) 6 ] 2 composite catalyst is a good candidate for remediation of contaminated water.
✓ 已验证
产品关联
DOI
高影响因子
DALTON TRANSACTIONS
·
2024
·Vol. 53
·期 26
·10919-10927
·
IF 3.5
Xuanzhao Lu,Baozhen Yuan,Yi Liu,Li-Xia Liu,Jun-Jie Zhu
Electrochemical reduction of carbon dioxide (CO2) or carbon monoxide (CO) to valuable multi-carbon (C2+) products like acetate is a promising approach for a sustainable energy economy. However, it is still challenging to achieve high activity and selectivity for acetate production, especially in neutral electrolytes. Herein, a bioinspired hemin/Cu hybrid catalyst was developed to enhance the surface *CO coverage for highly efficient electroreduction of CO to acetate fuels. The hemin/Cu electrocatalyst exhibits a remarkable faradaic efficiency of 45.2% for CO-to-acetate electroreduction and a high acetate partial current density of 152.3 mA cm−2. Furthermore, the developed hybrid catalyst can operate stably at 200 mA cm−2 for 14.6 hours, producing concentrated acetate aqueous solutions (0.235 M, 2.1 wt%). The results of in situ Raman spectroscopy and theoretical calculations proved that the Fe–N4 structure of hemin could enhance the CO adsorption and enrich the local concentration of CO, thereby improving C–C coupling for acetate production. In addition, compared to the unmodified Cu catalysts, the Cu catalysts functionalized with cobalt phthalocyanine with a Co–N4 structure also exhibit improved acetate performance, proving the universality of this bioinspired molecule-enhanced strategy. This work paves a new way to designing bioinspired electrolysis systems for producing specific C2+ products from CO2 or CO electroreduction.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
危险品化学品经营许可证（带存储）