Energy Technology
·
2021
·Vol. 9
·期 12
·2100743
·
IF 3.631
Xin Hou,Penggang Ren,Zhong Dai,Zhengzheng Guo,Zengping Zhang,Aiyue Sun,Wenwei He,Fang Ren,Yanling Jin
Herein, nitrogen, oxygen codoped porous carbon nanofibers (CNFs) from corn residue-derived lignin are fabricated via the electrospinning method, followed by introduction of graphenes (GNs) via a simple “brush-coating and drying” process. The obtained GN-coated carbon nanofibers (CNFs@GNs) exhibit a 3D network architecture, abundance of heteroatoms, excellent electrical conductivity, high specific surface area (700.92 m 2 g −1 ), thus boosting the electrochemical performances. The CNFs@GNs electrode delivers a higher specific capacitance of 271.1 F g −1 than CNFs (200.3 F g −1 ) at 1 A g −1 . Furthermore, the assembled CNFs@GNs symmetric supercapacitor exhibits an energy density of 20.3 Wh kg −1 at the power density of 199.97 W kg −1 together with a high charge/discharge reversibility of 97.3% and Coulombic efficiency of 99.81% after 10 000 cycles. This “brush-coating and drying” strategy utilized here provides a convenient and efficient route for designing CNFs and GN composites and can be utilized in other active materials.
研究领域:
材料科学
·
纳米科技
·
电化学
·
能源存储
·
功能材料
✓ 已验证
DOI
高影响因子
RSC Advances
·
2018
·Vol. 8
·期 65
·37417-37423
·
IF 2.936
Jihui Li,Kang Sun,Changyu Leng,Jianchun Jiang
Reasonable structure design and component selection are crucial to electrochemical performance of supercapacitor electrode materials. Sodium alginate (SA), with a novel structure which can immobilize multivalent metal cations, was used to coordinate with Fe3+ to fabricate a carbon and Fe3O4 composite by an easy sol–gel method. Due to the chelation effect between SA and Fe3+, the carbon composite was constructed into a two-dimensional sheet-like structure, and the Fe3O4 particles were nanosize and homogenously distributed on the surface of the carbon nanosheet. As an electrode material for supercapacitors, the composite electrode showed a high specific capacitance of 550 F g−1 at 1 A g−1 in the potential range from −1.1 to 0 V, and excellent cycling stability of 89% retention after 2000 cycles. The enhanced electrochemical performance could be attributed to the abundant exposed active sites, producing high pseudocapacitance, to the two-dimensional nanosheet structure, facilitating electrolyte transport and to the strong attachment strength, improving cycle life. This environmentally-friendly design can provide an alternative to existing methods, resulting in the development of a two-dimensional carbon/metal oxide composite for energy storage devices.
研究领域:
材料科学
·
电化学
·
纳米科技
·
能源存储
·
功能材料
✓ 已验证
DOI
高影响因子
MATERIALS & DESIGN
·
2016
·
IF 3.997
XinRong Liu,Ming Zhang,TingTing Yang,LiNa Wang,Han Zhu,ShunLi Wang,MingLiang Du
Carbon nanofibers served as nanoreactors for the design and construction of PtCo alloy carbon core-shell nanostructures with nitrogen doping (PtCo/NCNF) through a combination of electrospinning and nitrogen doping treatments. The PtCo/NCNF hybrid consists of PtCo alloy nanoparticles surrounded by a few of N-doped carbon layers , demonstrating a typical core-shell structures. The PtCo/NCNF hybrid can both served as electrode materials for electrocatalytic water splitting including hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). For the HER performance, the PtCo/NCNF exhibits very small onset potential of 20 mV, an overpotential of 50 mV at a j (vs RHE) = 10 mA cm − 2 and Tafel slope of 30 mV dec − 1 . The PtCo/NCNF hybrid also exhibits high OER activity with an onset potential of 310 mV, an overpotential of 400 mV at a j of 10 mA cm − 2 and a small Tafel slope of 76 mV dec − 1 . The high catalytic activities of PtCo alloy for HER and OER originate from the 3D hierarchical structures, well-dispersed PtCo alloy, high conductivity of NCNF, protection from the carbon-encapsulated structure, and the introduction of nitrogen.
研究领域:
材料科学
·
纳米技术
·
电化学
·
能源化学
·
催化化学
·
功能材料
✓ 已验证
DOI
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2022
·Vol. 47
·期 79
·33861-33871
·
IF 7.139
Zhizhong Leng,Zuzhi Huang,Xu Zhou,Bo Zhang,Hu Bai,Juan Zhou,Shaorong Wang
Proton-conducting solid oxide electrolysis cells (H-SOECs) are attracting attentions of researchers due to their unique advantages. The proton-conducting material BaCe 0·7 Zr 0·1 Y 0.1 Yb 0.1 O 3-δ (BZCYYb) has both the advantages of barium ceria-based and barium zirconate-based materials. BZCYYb material usually is synthesized by solid-state reaction (SSR) method, hence the densification of this electrolyte material is the key to restrict the application of H-SOECs. In this paper, effects of adding 1 wt% of different sintering aids (NiO, CuO, ZnO) to BZCYYb on the grain size and the conductivity are investigated. After adding 1 wt% of NiO and CuO sintering aids, BZCYYb electrolyte achieves ideal density. The electrical conductivity of four samples (BZCYYb without adding sintering aid, BZCYYb with 1 wt% NiO, CuO, ZnO, respectively) is tested under different steam concentrations of air, nitrogen, hydrogen, and nitrogen-hydrogen mixture. The conductivity increased after the sintering aid is added. With the increase of steam concentration, the conductivity decreased slightly and then increased due to electron holes under oxygen atmosphere with steam at high temperature. In other atmospheres, the conductivity increases with the steam concentration. In the atmosphere of 20 vol% H 2 O-Air and H 2 , the conductivity of the BZCYYb samples with 1 wt% CuO is about 1.087 × 10 −2 S cm −1 and 9.02 × 10 −3 S cm −1 at 650 °C, and the conductivity of the BZCYYb samples with 1 wt% NiO is 1.277 × 10 −2 S cm −1 and 8.24 × 10 −3 S cm −1 , respectively. However, compared with NiO, CuO has advantages in promoting hydration reaction and proton conduction of BZCYYb electrolyte.
研究领域:
材料科学
·
电化学
·
能源材料
·
固态离子学
·
陶瓷材料
✓ 已验证
DOI
高影响因子
SOLID STATE SCIENCES
·
2024
·
IF 3.4
Kaiwu Fu,Dandan Ma,Nan Zhang,Jiacheng Cao,Xiaonan Chen,Min Zhu,Peiqing La
Oxide thermoelectric materials have a wide range of applications due to their excellent stability, low cost, and non-toxic properties. However, their low thermoelectric conversion efficiency limits their practical use. Therefore, improving the performance of oxide thermoelectric materials has become the focus of current research. Interface engineering is an important approach to enhance thermoelectric properties by optimizing electrical transport properties through multiphase composite regulation of phase interface structure. A series of Sr 0.6 La 0.4 Nb 2 O 6-δ /x wt% graphite (x = 0, 0.6, 1.0, 1.5, 2.0) composite ceramics thermoelectric materials were prepared, and the mechanism for improving their thermoelectric properties was explored. Graphite serves as an electron momentum amplifier within the Sr 0.6 Ba 0.4 Nb 2 O 6-δ matrix, thereby augmenting both conductivity and power factor values significantly. Notably, the incorporation of 1.5 wt% graphite led to a remarkable enhancement in the thermoelectric power factor at 1073 K, reaching an impressive value of 254.84 μW/K 2 m - representing a notable increase of approximately 51 % compared to the unmodified sample - primarily attributed to the elevated electrical conductivity .
研究领域:
材料科学
·
无机非金属材料
·
热电转换
·
固态物理
·
功能陶瓷
✓ 已验证
DOI
高影响因子
RSC Advances
·
2014
·Vol. 4
·期 86
·45930-45938
·
IF 3.708
Mengmeng Zhang,Hongxia Yan,Xiaowei Yang,Chao Liu
In this paper, graphene oxide (GO) was functionalized with a hyperbranched cyclotriphosphazene polymer, which was synthesized by the repeated reactions of hexachlorotriphosphazene with hexamethylenediamine. Subsequently, the resultant functionalized GO was incorporated into dicyclopentadiene bisphenol dicyanate ester (DCPDCE) to prepare composites. Fourier-transform infrared spectra, X-ray photoelectron spectroscopy, X-ray diffraction and transmission electron spectroscopy were employed to examine the surface functionalization of GO. The effects of functionalized GO on the curing reactivity, mechanical, dielectric, thermal and water resistent properties of DCPDCE resin were investigated systematically. Results show that the addition of modified GO can facilitate the curing reaction of DCPDCE. Meanwhile, the appropriate content of modified GO can enhance the mechanical properties including impact and flexural strengths of DCPDCE resin. When modified GO content is 0.6 wt%, the corresponding composite exhibits slightly higher dielectric constant but lower dielectric loss than pure DCPDCE resin over the testing frequency from 10 to 60 MHz. In addition, the thermal stability and moisture resistance of modified GO/DCPDCE nanocomposties are also superior to that of pure DCPDCE resin.
研究领域:
高分子化学
·
复合材料科学
·
材料物理与化学
·
纳米材料
·
绝缘材料
✓ 已验证
DOI
高影响因子
POLYMER
·
2019
·
IF 3.771
Wenbo Shen,Ling Wang,Gang Chen,Chunxin Li,Lanying Zhang,Zhou Yang,Huai Yang
A liquid crystalline epoxide was synthesized and its curing reactivity was compared with that of the conventional epoxy monomers . By utilizing the difference in curing reactivity between the liquid crystalline epoxide and non-liquid crystalline epoxy monomers, a coexistent system of polymer-dispersed and polymer-stabilized liquid crystal (LC) in the intelligent films can be obtained by two-step thermal curing method. If the later curing process was undertaken under an external electric field , the ordered microstructure of liquid crystalline epoxy polymer (LCEP) network can be implanted into the conventional epoxy resin. The competition of the anchoring effect on the LC molecules from the LCEP network and the conventional epoxy resin matrix was crucial to the electro-optical performance of the films. Moreover, the performance of the films can be adjusted by controlling the content of liquid crystalline epoxide and the external electric field applied during later curing. This approach can provide a facile route to regulate the electric-optical performance of polymer-dispersed liquid crystal films for practical applications.
研究领域:
材料科学
·
高分子化学
·
功能材料
·
光电工程
·
智能材料
✓ 已验证
DOI
高影响因子
RSC Advances
·
2014
·Vol. 4
·期 39
·20208-20215
·
IF 3.708
Lei Sun,Xinge Zhang,Jinxia An,Cui Su,Qianqain Guo,Chaoxing Li
Currently, the major challenge for cancer treatment is to develop simple and smart nanocarriers that can efficiently retain the encapsulated drug during blood circulation, recognize tumor cells and quickly release the drug under stimulation. In this paper, such a pH-sensitive core–shell composite nanoparticles is prepared based on a 3-aminophenylboronic acid modified mesoporous silica nanoparticles (MSN–APBA) core coated with a lactobionic acid grafted chitosan (CS–LA) shell via boronate ester bonds. The MSN core increases drug loading capacity and stability, and lactobionic acid offers abundant diols which can form pH sensitive boronate ester bonds with APBA on MSN. Meanwhile, the lactobionic acid-conjugated shell could also efficiently target the asialoglycoprotein receptor over expressing hepatoma cells. The successful synthesis of CS–LA and MSN–APBA is confirmed by the results of TGA, TEM, DLS, FT-IR, 1H-NMR and N2 adsorption–desorption. Doxorubicin hydrochloride (DOX) is applied as a model drug and the behaviors of drug loading/release are investigated. The drug loading behavior is pH-dependent, and its drug encapsulation efficiency is near 80% and loading capacity is 13.05%. The results of cumulative in vitro release indicate that at neutral pH, the pores of the MSN are effectively capped with a polymer shell and the drug release is strongly inhibited, almost zero release. While at acidic pH, the hydrolysis of the boroester bond takes place and thus results in a rapid release of the entrapped drug. The cytotoxicity assay indicates high cell biocompatibility of this material and it is suitable as a drug carrier. When loaded with DOX, it presents distinctly cytotoxic behavior to HepG2 cells, due to the sustained release of drug. These results imply that the core–shell nanoparticles are promising platforms to construct simple and effective pH-responsive controlled drug delivery systems for cancer therapy.
研究领域:
肿瘤学
·
药剂学
·
纳米医学
·
生物材料
·
分子药理学
·
靶向治疗
✓ 已验证
DOI
高影响因子
ELECTROCHIMICA ACTA
·
2016
·
IF 4.803
Yuxiao Li,Meishan Zhang,Xueyan Wang,Zhun Li,Lianhua Zhao
Sulfonated poly (ether ether ketone) (SPEEK, SP) with tetraethoxysilane (TEOS) and diethylethylammonium trifluoromethanesulfonate ([dema] [OTf]) were used to make SP/SiOx/OTf inorganic–organic composite membranes by the sol–gel method. The composite membranes were studied with respect to their structural, thermal, ionic liquid leeching (ILs), mechanical, and proton conduction properties. Fourier transform infrared spectroscopy (FT-IR) results showed that there exist intermolecular forces between the sulfonic groups, silica, and ILs in the composite membrane. Thermogravimetric (TG) results showed that the thermal stability of the SP/SiOx/OTf composite membrane is better than that of the pristine SPEEK membrane. IL leaching studies showed that the sulfonic group could help to reduce the loss of ILs. The introduction of silica in the SP/SiOx/OTf composite membrane could further reduce the loss of ILs, and also reduce the swelling degree of the composite membrane. Dynamic mechanical analysis (DMA) data showed that the introduction of silica can increase the flexibility of membranes, and improve the mechanical properties. A proton conductivity of 2.003 × 10 −2 S/cm was obtained for a 50 wt% [dema][OTf] doped SP-66/SiOx/OTF-50 composite membranes at 220 °C under anhydrous conditions.
研究领域:
材料科学
·
高分子化学
·
能源材料
·
电化学
·
膜科学
✓ 已验证
DOI
高影响因子
CNS Neuroscience & Therapeutics
·
2022
·
IF 7.035
Jing Li,Jianhao Liang,Meiqin Zeng,Kaijian Sun,Yunhao Luo,Huaping Zheng,Feng Li,Wen Yuan,Hongwei Zhou,Junshan Liu,Haitao Sun
Introduction White matter injury (WMI) significantly affects neurobehavioral recovery in intracerebral hemorrhage (ICH) patients. Gut dysbiosis plays an important role in the pathogenesis of neurological disorders. Oxymatrine (OMT) has therapeutic effects on inflammation-mediated diseases. Whether OMT exerts therapeutic effects on WMI after ICH and the role of gut microbiota involved in this process is largely unknown. Methods Neurological deficits, WMI, gut microbial composition, intestinal barrier function, and systemic inflammation were investigated after ICH. Fecal microbiota transplantation (FMT) was performed to elucidate the role of gut microbiota in the pathogenesis of ICH. Results OMT promoted long-term neurological function recovery and ameliorated WMI in the peri-hematoma region and distal corticospinal tract ( CST ) region after ICH. ICH induced significant and persistent gut dysbiosis, which was obviously regulated by OMT. In addition, OMT alleviated intestinal barrier dysfunction and systemic inflammation. Correlation analysis revealed that gut microbiota alteration was significantly correlated with inflammation, intestinal barrier permeability, and neurological deficits after ICH. Moreover, OMT-induced gut microbiota alteration could confer protection against neurological deficits and intestinal barrier disruption. Conclusions Our study demonstrates that OMT ameliorates ICH-induced WMI and neurological deficits by modulating gut microbiota.
研究领域:
神经病学
·
肠道微生物学
·
分子药理学
·
神经免疫学
·
转化医学
✓ 已验证
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2022
·Vol. 48
·期 22
·33455-33461
·
IF 5.532
Yuyu Liu,Wenye Deng,Xianghui Chen,Yan Xue,Xuelian Bai,Huimin Zhang,Aimin Chang,Yongxin Xie
A series of novel high temperature negative temperature coefficient (NTC) composite ceramics based on (1- x )CaMn 0.05 Zr 0.95 O 3 - x NiMn 2 O 4 ( x = 0, 0.1, 0.2, 0.3) were fabricated by using the solid-state method. The Rietveld refinement method and backscattered electron (BSE) image confirmed the absence of any other phase. The conduction mechanism of the composite ceramics was determined by analyzing the complex impedance and resistance-temperature characteristics, which could be related to the formation of a continuous Mn 3+ -O-Mn 4+ network. The effect of spinel content on the high temperature stability was analyzed using aging tests. The ρ 400°C , ρ 700°C and B 400/700 values of the NTC thermistors were determined to be 4.9 × 10 6 –1.2 × 10 4 , 1.4 × 10 5 –0.8 × 10 3 Ω cm and 12739-5712 K, respectively. This indicated that the electrical properties could be tuned by adjusting the weight ratio of CaMn 0.05 Zr 0.95 O 3 and NiMn 2 O 4 . The findings obtained in this study reveal that the composite NTC thermistor exhibits a good application potential at high temperatures and under harsh environments.
研究领域:
材料科学
·
无机非金属材料
·
电子功能材料
·
固态离子学
·
高温传感器技术
✓ 已验证
DOI
高影响因子
RSC Advances
·
2019
·Vol. 9
·期 46
·26712-26717
·
IF 3.049
Yongzhao Su,Duotian Chen,Siyuan Yang,Shengsen Zhang,Yingju Liu,Yueping Fang,Qiao Zhang,Feng Peng
A photoelectrochemical (PEC) method based on the etching reaction of F ions on the surface of TiO2 nanorod arrays (TNRs) was proposed for the high sensitivity and selectivity detection of F ions. With the increase of F ion concentration, the surface etching reaction on TNR becomes more intense, resulting in the increased number of surface active sites, the reduction of electron transfer resistance, and the increase of photocurrent density. The prepared TNRs as a PEC probe exhibits a good linear relationship between photocurrent increment and the logarithm of F ion concentration in the range from 0.05 to 1000 nM with an ultra-trace detection limit of 0.03 nM for F ion detection.
研究领域:
分析化学
·
环境监测
·
纳米材料
·
电化学传感
·
生物医学工程
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）