EUROPEAN JOURNAL OF INORGANIC CHEMISTRY
·
2020
·Vol. 2020
·期 7
·626-630
·
IF 2.529
Min Li,Guan-Cheng Xu,Wen-Bo Xin,Yin-Qiang Zhang
Graphical The new organic-inorganic hybrid compound (CH 3 NH 3 ) 4 [InCl 6 ]Cl has been successfully synthesized by reaction of methylammonium with indium(III) chloride tetrahydrate. It undergoes a first-order phase transition accompanied with an obvious step-like dielectric switching. A new organic-inorganic phase transition material (CH 3 NH 3 ) 4 [InCl 6 ]Cl ( 1 ), has been successfully synthesized and characterized. The compound undergoes a reversible first-order phase transition at Curie temperature Tc=284 K, accompanied with a wide hysteresis of 12 K, which investigated by differential scanning calorimetry (DSC). The temperature dependence of the dielectric permittivity discloses an obvious step-like dielectric anomaly. Single crystal X-ray diffraction reveals that the order-disorder transition of the [InCl 6 ] 3– anion and the methylammonium cation were the main factor drove the phase transition from high temperature phase with the space group P 2/ m to low temperature phase with the space group P 2/ n . This finding indicates that In-based organic–inorganic hybrids compounds can be used to build phase transition materials, which broaden the way for exploring dielectric switching materials.
✓ 已验证
DOI
高影响因子
Journal of Information Display
·
2019
·
IF 0
Xiaoliang Pang,Xuejie Zhang,Bingfu Lei,Haoran Zhang
Embedding CsPbX3 (X = Cl, Br, I) perovskites QDs in inorganic glass matrix via in-situ crystallization has been regarded as a feasible strategy to improve their stability against water, heat, and light irradiation. However, the tunable-emission range of these CsPbX3-nanocrystals-embedded glasses is still narrow, insufficient to cover a wide color gamut. Herein, a simple synthetic method was developed in this study to obtain the tunable-emission CsPb(Cl/Br)3 quantum dots (QDs) in boro-germanate glass (CsPb(Cl/Br)3 QDs@glass) by controlling the molar ratio of PbBr2/PbCl2. With the increase of the PbBr2 concentration from 1.6 to 3.2 mol%, the emission wavelength of CsPb(Cl/Br)3 QDs@glasses can be shifted from 448 to 485 nm, and the corresponding photoluminescence quantum yield (PLQY) increases from 0.61 to 24.43%. In addition, the CsPb(Cl/Br)3 QDs@glass exhibits impressing promotion of thermal stability, photostability, and water resistance due to the excellent protective function of the glass matrix. As a proof-of-concept experiment, a LED device was fabricated by employing the optimal CsPb(Cl/Br)3 QDs@glass with a commercial 375 nm UV chip, yielding an intense cyan light. All the results indicate that the investigated CsPb(Cl/Br)3 QDs@glasses may find promising applications as color convertors in wide-color-gamut liquid crystal displays (LCDs).
✓ 已验证
DOI
Catalysis Science & Technology
·
2022
·Vol. 12
·期 22
·6687-6703
·
IF 6.177
Furong Cao,Yun Wang,Xing Wang,Wenjuan Zhang,Gregory A. Solan,Rui Wang,Yanping Ma,Xiang Hao,Wen-Hua Sun
Five types of N-(2-(diphenylphosphino)ethyl)-2-R-5,6,7,8-tetrahydroquinolin-8-amines (R = H L1, Me L2, iPr L3, Cl L4, Ph L5) along with one example of an N-isopropyl-5,6,7,8-tetrahydroquinolin-8-amine (L6) have been prepared and employed as neutral ligand supports for zinc(II) chloride complexes, LZnCl2 (Zn1–Zn6). All zinc compounds were characterized by multinuclear NMR spectroscopy (1H/13C/31P) and elemental analysis, while the structures of Zn2 and Zn5 were further studied by single crystal X-ray diffraction: distorted tetrahedral geometries with the diphenylphosphine moieties non-coordinated were a feature. Pre-treatment of Zn1–Zn5 with two equivalents of either LiCH2SiMe3 or LiN(SiMe3)2 led to catalysts displaying good to exceptionally high activity for the ring opening polymerization (ROP) of ε-caprolactone (ε-CL) at 50 °C. For example, Zn4/2LiCH2SiMe3 displayed a TOF of 2.1 × 104 h−1 with 71% conversion seen within 10 minutes with the ε-CL : Zn molar ratio at 5000 : 1; the resulting polycaprolactone (PCL) comprised predominately cyclic structures along with lower levels of trimethylsilylmethyl-capped linear PCL. By comparison, Zn1–Zn5 on treatment with two equivalents of LiN(SiMe3)2 at the same high monomer to zinc ratio, led to catalysts exhibiting an order of magnitude higher activity. Zn1/2LiN(SiMe3)2 in the presence of BnOH exhibited a remarkable TOF of 1.35 × 105 h−1 with 90% monomer conversion within two minutes. In these cases, a distinct selectivity towards linear polymers capped with CH3O end-groups (derived from the quenching solvent) was observed with cyclic polyesters only observable with larger amounts of ε-CL. As a general observation, the 2-R substituent on the chelating ligand showed noticeable effects on the efficiency and on the molecular weight of the PCLs, with 2-Cl-containing Zn4 in combination with LiCH2SiMe3 and BnOH affording the highest molecular weight PCL of the study (9.57 × 104 g mol−1). Based on the microstructural properties of the PCL, distinct mechanisms (viz., coordination–insertion and ring expansion) have been proposed to account for the mode of propagation mediated by Zn/2LiCH2SiMe3 and Zn/2LiN(SiMe3)2. In addition, a zinc silylamido L1−HZn[N(SiMe3)2] (Zn7) species has been tentatively assigned (obtained via deprotonation of L1 with Zn[N(SiMe3)2]2), that proved inactive for the ROP of ε-CL but displayed good activity for ROP of rac-LA.
✓ 已验证
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2025
·
IF 8.2
Kai Zhang,Peifeng Wang,Zhuohui Sun,Hongwei Zhang,Rui Chang,Youlong Xu
Poor electronic conductivity, low potential plateau, rapid capacity decay, and poor rate capability are critical challenges hindering the development of layered transition metal oxides such as P2-Na0.7MnO2. To address these issues, a high-entropy design combined with Cl substitution has been implemented, resulting in the material P2-Na0.7Li0.02K0.02Mg0.02Fe0.05Cu0.05Ni0.25Ti0.02Nb0.02Mn0.59O1.93Cl0.07. Hall effect tests reveal a transition from hole-dominated to electron-dominated conduction, significantly improving the Na+ transport kinetics, enhancing electronic conductivity, and facilitating the release of a high specific capacity and specific energy. Notably, the bulk carrier concentration increases from 1.63 × 1011 to 2.63 × 1012 cm–3, the surface carrier concentration rises from 2.47 × 1010 to 2.16 × 1011 cm–2, and the mobility improves from 322.7 to 455.9 cm2 (V s)−1. Consequently, the electronic conductivity undergoes a remarkable 20-fold increase from 8.44 × 10–6 to 1.915 × 10–4 S cm–1. The material delivers a reversible capacity of 196.80 mAh g–1 and a specific energy of 587.07 Wh kg–1 at a current rate of 0.05 C.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2025
·
IF 13.2
Handong Shi,Shijiao Li,Kai Han,Chuanhao Xu,Lei Gao,Fan Liao,Yanpeng Lv,Yurong Zhang,Chongwei An
This study presents a strategy for developing CL-20 (Hexanitrohexaazaisowurtzita-ne)-based energetic composites with enhanced mechanical properties and intrinsic safety through the synergistic design of PVA (polyvinyl alcohol) /PAA (polyacrylic acid) interpenetrating polymer networks (IPNs) and direct ink writing (DIW) technology. Based on the “hydrogen bond-covalent bond-plasticization” synergistic reinforcement strategy, an IPNs gel system with tunable mechanical properties was developed. After optimizing the polymer ratio (4:3), Crosslinking agent (1 %), and glycerol content (17.5 %), a balance between toughness, ductility, and strength was attained. The DIW-printed structure exhibited excellent molding accuracy and interfacial adhesion (0.924 MPa to aluminum). System characterization demonstrated that the IPN structure achieved uniform CL-20 distribution and controlled porosity, significantly enhancing its mechanical properties, safety, and detonation performance. Its elastic modulus is close to that of engineering plastics(4.504 GPa), the hardness is between soft rubber and hard plastics (0.107 GPa), and the compressive strength is higher than that of typical PBX explosives (15.64 MPa). By using PVA/PAA IPNs, a “topological entanglement-passivation defect” mechanism was established to suppress mechanical sensitivity. Compared to submicron ε-CL-20, the molded sample reduced impact sensitivity by 33.3 % and friction sensitivity by 128.6 %. Additionally, detonation propagation was achieved in a 1.2 × 1.2 mm charge slot within a 90°-160° corner range, with the critical detonation transmission size reaching 0.3 × 0.3 mm and the detonation velocity maintained at 7362 m/s (82.4 % theoretical detonation velocity). This study offers a scalable manufacturing framework for developing energetic devices that combine mechanical properties, intrinsic safety, and adaptability to complex structures.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED ORGANOMETALLIC CHEMISTRY
·
2026
·Vol. 40
·期 10
·e70655
·
IF 4.3
Xiaoju Liu,Sunqiu Fan,Shijin Hu,Zeyu Ye,Xiaoyan Ma,Guoxiong Wang,Xiangrong Ma
Two novel trinuclear ferrocenyl coordination compounds, Fc 3 N 4 /Fe and Fc 3 N 4 /Co, were synthesized as burning-rate catalysts for ammonium perchlorate (AP). The trinuclear architecture, featuring a nitrogen-rich ligand bridging three ferrocene units with transition metal centers, was designed to enhance multi-site electron transfer and thereby promote catalytic performance. At 3 wt% loading, Fc 3 N 4 /Co reduced AP's high-temperature decomposition temperature by 126°C, decreased the apparent activation energy by 74.0 kJ · mol −1 , and increased heat release by 718 J · g −1 , outperforming the corresponding mononuclear analogues and commercial binuclear ferrocene catalysts. Structural characterization (XRD, BET, XPS) and DFT calculations suggest that the superior catalytic activity arises from synergistic Co–Fe electronic modulation that facilitates N–H and Cl–O bond activation, together with a high specific surface area (310.6 m 2 · g −1 ) that provides abundant active sites. This work establishes trinuclear ferrocenyl coordination compounds as a promising platform for high-performance burning-rate catalysts in composite solid propellants.
✓ 已验证
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2023
·Vol. 34
·期 6
·1-10
·
IF 2.8
Zhou Jintao,Zang Yue,Wang Yu,Chu Liang,Li Guodong,Xu Rui,Yan Wensheng
Silver nanowires have great development potential in the field of transparent electrodes, and their optoelectronic properties are closely related to the morphology and composition. During the synthesis of polyol method, the aspect ratio of AgNWs can be tailored using PVP with different molecular weights, and the diameter of AgNWs can be tuned by incorporating halides. Here, the synergistic effect of Cl − and Br − in the mixed PVP system were deeply investigated by adjusting the concentration ratio of Cl − and Br − . The growth mechanism of silver nanowires was studied by monitoring the acidity of the reaction process. It was found that under the assistance of PVP with different molecular weights, the coordination of Cl − and Br − greatly increased the activation energy of the reaction, which played a key role in the nucleation and growth of AgNWs. As a result, high-quality AgNWs with an average length of 35.7 μm and an average diameter of 67 nm were synthesized at the optimized concentration ratio of Cl − and Br − . Finally, the synthesized silver nanowires were deposited as conductive films on glass to obtain high-performance transparent electrode with a sheet resistance of 22.38 Ω/sq and transmittance of 83.95%.
✓ 已验证
产品关联
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2022
·
IF 5.532
Fanyong Yan,Yao Wang,Chunhui Yi,Jinxia Xu,Bowei Wang,Ran Ma,Ming Xu
The composition of composite photocatalysts with both broad spectral response and efficacious separation of photoinduced carriers were essential. The CDs were installed on the surface of the three-dimensional hollow microsphere nanophotocatalyst Bi 2 WO 6 by the hydrothermal approach. Crystal structure, morphology and composition revealed the synthesis of the composite catalyst. The higher photocatalytic capability of 0.5% CDs/Cl–Bi 2 WO 6 (0.0317 min −1 ) was observed in the degradation procedure, explained that the doping of Cl and the presence of CDs remarkably strengthened the visible light capture and depressed the rate of electron-hole pair complexation. Notably, scavenger-quenching assays results verified that activities of h + , •OH and •O 2 ‾ were the primary actors in the degradation procedure. Ultimately, the degradation mechanism of a feasible TCH was submitted. This study presented a novel concept for the exploitation of composite nanophotocatalysts for the effective degradation of organic pollutants.
✓ 已验证
产品关联
DOI
高影响因子
CERAMICS INTERNATIONAL
·
2022
·
IF 5.532
Zhangwen Long,Shuai Yang,Jiacheng Pi,Dacheng Zhou,Qi Wang,Yong Yang,Hao Wu,Jianbei Qiu
All-inorganic metal halides perovskites , such as CsPbX 3 quantum dots (QDs), are high-performance photoelectric materials ; they have attracted considerable attention for applications such as LEDs and laser and solar cells. Herein, we report an anion hot injection (HI) method to prepare CsPbX 3 (X = Cl, Br, I, Cl/Br, and Br/I) QDs using trimethylhalosilane (TMXS) as a halogen ion donor. By adjusting the ratio of different TMXSs (trimethylchlorosilane, trimethylbromosilane, and trimethyliodosilane), the synthesized samples can achieve tunable emission in the range of 416–710 nm, narrow emission line widths of 13–33 nm, and luminescence lifetimes of 32–223 ns. These QDs also have better stability in external environment compared with those obtained using traditional HI method.
✓ 已验证
产品关联
DOI
高影响因子
WATER RESEARCH
·
2022
·
IF 13.4
Wenxiao Zheng,Yingkai Chen,Hengyi Fu,Zhang Yan,Zhenchao Lei,Weijian Duan,Chunhua Feng
The generation of chlorinated byproducts during the electrochemical oxidation (EO) of Cl − -laden wastewater is a significant concern. We aim to propose a concept of converting reactive species (e.g., reactive chlorines and HO • resulting from electrolysis) into 1 O 2 via the addition of H 2 O 2 , which substantially alleviates chlorinated organic formation. When phenol was used as a model organic compound, the results showed that the H 2 O 2 -involving EO system outperformed the H 2 O 2 -absent system in terms of higher rate constants (5.95 × 10 −2 min −1 vs. 2.97 × 10 −2 min −1 ) and a much lower accumulation of total organic chlorinated products (1.42 mg L −1 vs. 8.18 mg L −1 ) during a 60 min operation. The rate constants of disappearance of a variety of phenolic compounds were positively correlated with the Hammett constants ( σ ), suggesting that the reactive species preferred oxidizing phenols with electron-rich groups. After the identification of 1 O 2 that was abundant in the bulk solution with the use of electron paramagnetic resonance and computational kinetic simulation, the routes of 1 O 2 generation were revealed. Despite the consensus as to the contribution of reaction between H 2 O 2 and ClO − to 1 O 2 formation, we conclude that the predominant pathway is through H 2 O 2 reaction with electrogenerated HO • or chlorine radicals (Cl • and Cl 2 • − ) to produce O 2 • − , followed by self-combination. Density functional theory calculations theoretically showed the difficulty in forming chlorinated byproducts for the 1 O 2 -initiated phenol oxidation in the presence of Cl − , which, by contrast, easily occurred for the Cl • -or HO • -initiated phenol reaction. The experiments run with real coking wastewater containing high-concentration phenols further demonstrated the superiority of the H 2 O 2 -involving EO system. The findings imply that this unique method for treating Cl − -laden organic wastewater is expected to be widely adopted for generalizing EO technology for environmental applications.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF POWER SOURCES
·
2022
·
IF 9.794
Dekun Shi,Zhaojun Shi,Lixin Zhang,Yaan Cao
A series of halogen ions (Cl − , Br − , or I − ) modified Bi 2 MoO 6 (Bi 2 MoO 6 –Cl, Bi 2 MoO 6 –Br, or Bi 2 MoO 6 –I) are synthesized via a one-step solvothermal method . It is determined that the halogen ions (Cl − , Br − , or I − ) are modified on the surface of Bi 2 MoO 6 as the -Bi-Cl, -Bi-Br, or -Bi-I species (the connected Bi 3+ is coordinated with three lattice O2- ions in Bi 2 MoO 6 ). The -Bi-Cl, -Bi-Br, or -Bi-I species on the Bi 2 MoO 6 surface can act as highly active sites to polarize and activate the N 2 and H 2 O molecules adsorbed on the surface of catalysts. Moreover, due to the surface-modified -Bi-Cl, -Bi-Br, or -Bi-I species, the visible light absorption is improved, the separation of photogenerated charge carriers is promoted, as well the band structure is better matched with the redox potential of photoreduction of N 2 . As a result, the photocatalytic activity of Bi 2 MoO 6 –Cl, Bi 2 MoO 6 –Br, or Bi 2 MoO 6 –I is improved for photoreduction of N 2 into NH 3 compared with Bi 2 MoO 6 . Overall, this work provides new insights into the doping states of halogen ions, the surface-active sites, the band structure, the photocatalytic activity, and the mechanism for photoreduction of N 2 into NH 3 for Bi 2 MoO 6 with modification of halogen ions (Cl − , Br − , or I − ).
✓ 已验证
产品关联
DOI
高影响因子
PROPELLANTS EXPLOSIVES PYROTECHNICS
·
2021
·Vol. 46
·期 12
·1837-1843
·
IF 1.887
Shuyi Duan,Feng Ding,Haitao Sun,Chun Xiao,Shangbin Li,Qing Zhu
To have a deep understanding of the effects of surface wettability on the mechanical sensitivity and rheological characteristics of PBX slurry, CL-20 particles with hydrophilic property was prepared through a polymerization process of dopamine, and CL-20 particles with hydrophobic property were prepared through a condensation polymerization process of hexadecyltrimethoxylsilane. The morphology, surface element content and surface wettability of CL-20 crystals before and after modification were characterized by scanning electronic microscope (SEM), X-ray photoelectron spectroscopy (XPS), and contact angle test. The rheological characteristics of CL-20 based PBX slurry showed that the interaction between explosive particles and binder was changed with different surface wettability of CL-20. The weaker interaction between CL-20@hydrophobic and binder lead to weaker solid-liquid friction, resulted in lower apparent viscosities of CL-20@hydrophobic based PBX slurry at high shear rate. The mechanical sensitivity of wax coated CL-20 with different surface wettability was tested. CL-20@hydrophobic-wax exhibited better mechanical stability compared to CL-20-wax and CL-20@hydrophilic-wax, probably owning to the weaker interaction between CL-20@hydrophobic surface and wax.
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）