文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第3229至3240个,产品总数4,858个

切换升序
(Fe
JOURNAL OF HAZARDOUS MATERIALS · 2020 · IF 9.038

A novel process for comprehensive resource utilization of hazardous chromium sludge: Progressive recovery of Si, V, Fe and Cr

Yun Guo,Hong-Yi Li,Shuo Shen,Jie Cheng,Jiang Diao,Bing Xie

Chromium sludge is a hazardous solid waste which cannot be effectively treated but only piled up and abandoned, causing serious environment pollution and resource wasting. This work proposes an effective novel process to separately recover all resources in chromium sludge via a sustainable way. The obtained acid solving liquid from chromium sludge is desiliconized by cationic flocculant (PCAM) to induce coprecipitation of polysilicate gel and PCAM , which mixture is calcinated to generate the product of white carbon black in purity of 94.35% with a recovery of 92.58%. After desiliconization, V in the solving liquid is selectively extracted by microemulsion (ME), which is recovered as V 2 O 5 in purity of 99.34% with a recovery of 95.53% by the subsequent procedure of stripping-precipitation-calcination. The Fe 3+ in raffinate is reduced to Fe 2+ cations by Na 2 SO 3 , and is then recovered by H 2 C 2 O 4 precipitation to generate the FeC 2 O 4 product in purity of 99.12% with a recovery of 98.25%. Cr 3+ cations in residual solution are recovered by alkaline precipitation and calcination to generate the Cr 2 O 3 product in purity of 98.25% with a recovery of 92.68%. This work provides fresh penetrations into the synchronous detoxification, resource recovery and value-added utilization of hazardous industrial solid wastes.

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
APPLIED SURFACE SCIENCE · 2022 · IF 7.392

Fe-metal-organic-framework/MnO2 nanowire/granular activated carbon nanostructured composites for enhanced As(III) removal from aqueous solutions

Wenlan Ji,Xinyu Miao,Tian C. Zhang,Yuan Wang,Shaojun Yuan

The elimination of arsenic pollution has attracted increasing concerns due to its toxicity and severe carcinogenicity. Herein, we proposed an in-situ crystal growth strategy without surfactant to fabricate MIL-88B uniformly anchored on the surface of MnO 2 /GAC (MIL-88B/MnO 2 /GAC). Such innovative MIL-88B/MnO 2 /GAC nanostructured composites not only exhibited the synergetic functions of simultaneously oxidizing As(III) and adsorbing the generated As(V), but also effectively reduced the cost of metal–organic frameworks (MOFs) adsorbents. Impressively, the as-prepared sample achieved remarkably boosted As(III) removal capacity of 15.13 mg g −1 compared to 4.1 mg g −1 of MnO 2 /GAC composite and 2.1 mg g −1 of GAC , which was mainly ascribed to the synergistic effect between the excellent adsorption abilitiy of MIL-88B and oxidation property of MnO 2 /GAC. Owing to the unique construction and properties, the constructed MIL-88B/MnO 2 /GAC composites presented a desirable As(III) removal ability under a wide pH scope of 2 to 10. Moreover, the possible mechanism of the synergistic removal over MIL-88B/MnO 2 /GAC was elucidated by X-ray photoelectron spectroscopy (XPS), electron spin resonance (ESR) and radical trapping experiment. This work not only offers a superior bifunctional catalyst for high-efficient removal of arsenic, but also provides a new perspective for rational construction of MOF derivatives for their further applications.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY · 2021 · IF 5.816

Soybean powder enables the synthesis of Fe–N–C catalysts with high ORR activities in microbial fuel cell applications

Ting Huang,Jinhui Wei,Xiaoting Zhu,Enren Zhang

The development of microbial fuel cells (MFCs) into a new type of carbon-neutral wastewater treatment technology requires efficient and low-cost oxygen reduction reaction catalysts in air cathodes. The use of raw soybean powder was investigated for synthesizing Fe–N–C ORR catalysts in a sacrificial SiO 2 support method. ZnCl 2 etching in the synthesis was found to facilitate the formation of hierarchical porous structures of Fe–N–C catalysts. Fe–N–C(1-1) catalyst synthesized with an optimal soybean/ZnCl 2 mass ratio of 1:1 exhibited the highest ORR activity in air cathodes. The use of the obtained Fe–N–C(1-1) catalyst enables a maximum power production of ~0.480 mW cm −2 in MFCs, higher than commercial Pt/C (0.438 mW cm −2 ) with the same catalyst loading of 2 mg cm −2 . Long-term MFC operations demonstrated that the Fe–N–C synthesized from raw soybean have high stability and toxic tolerance, indicating that abundant low cost soybean biomass is a potential material for ORR catalyst development in MFC applications.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
SEPARATION AND PURIFICATION TECHNOLOGY · 2022 · IF 9.136

Activation of peroxymonosulfate via a novel UV/hydrated Fe(III) oxide coupling strategy for norfloxacin removal: Performance and mechanism

Shunlong Pan,Xinrui Guo,Rong Li,Hao Hu,Jingwei Yuan,Biming Liu,Shengqiang Hei,Yongjun Zhang

Advanced oxidation processes (AOPs) have been successfully applied for the degradation of fluoroquinolones, but most studies ignored the removal of fluorine ions (F − ) generated after the degradation, and the remaining F − would cause secondary pollution to the water body. In this study, a novel UV radiation/hydrated Fe(III) oxide (HFO) coupling strategy was utilized to activate peroxymonosulfate (PMS) for the comprehensive enhanced removal of norfloxacin (NX) and the generated F − . Results showed that UV/HFO/PMS process significantly improved NX degradation efficiency compared with individual system, and NX degradation efficiency of 97.3% could be achieved by reactive oxygen species (ROS) generated in the process, in which singlet oxygen ( 1 O 2 ) was the main ROS. Moreover, the remaining concentration of F − was generally below 0.35 mg/L within a wide pH range (4–10). And the simultaneous adsorption of HFO for F − is mainly related to coordination and electrostatic interaction . After five cycles, the catalytic efficiency of HFO for NX removal only dropped by 4.4%. Besides, UV/HFO/PMS system had great anti-interference ability on coexisting anions. UV/vis two-dimensional correlation spectroscopy (2DCOS) analysis revealed that ROS would preferentially degrade the piperazine ring, and the quinolone group would be destroyed before the heteroatom during the degradation of NX. This work provides new insights for the treatment of antibiotic pollution.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF POWER SOURCES · 2022 · IF 9.794

Nitrogen-doped carbon nanofibers anchoring Fe nanoparticles as biocompatible anode for boosting extracellular electron transfer in microbial fuel cells

Yuanfeng Liu,Jiaona Wang,Yaxin Sun,Huiyu Li,Zhenyu Zhai,Shiquan Guo,Tingli Ren,Congju Li

Sluggish extracellular electron transfer (EET) at the anode interface is the major obstacle to achieving satisfactory power density in microbial fuel cells (MFCs). To boost the EET efficiency, herein the anode electrocatalysts , nitrogen-doped carbon nanofibers anchoring Fe nanoparticles (Fe/N-x@CNFs, x = 0.5, 1, 3, 5), are rationally designed via electrospinning and calcination process. The morphology and structure characterization indicates that the Fe/N-3@CNFs electrocatalyst presents a porous structure with uniformly distributed Fe nanoparticles on the carbon matrix, which offer a large-accessible surface area for electroactive bacteria habitation along with facilitated EET efficiency. Electrochemical measurements demonstrate that the as-fabricated Fe/N-3@CNFs exhibit excellent electrocatalytic activity for the charge transfer on the anode, endowing the cell with a maximum power density of 1873.8 mW m −2 , which is 1.8 and 3.6 times higher than that of Fe@CNFs (1039.2 mW m −2 ) and carbon cloth (519.8 mW m −2 ). The outstanding performance of Fe/N-3@CNFs can be attributed to the increased electronic conductivity of carbon matrix with melamine additives, the enriched electroactive bacteria as demonstrated by high-throughput sequencing, and the released positively charged iron mediators to promote EET efficiency. This investigation introduces an effective method of constructing high-efficient anode electrocatalysts for enhancing the output MFCs performance.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
SEPARATION AND PURIFICATION TECHNOLOGY · 2025 · IF 9

Defect-engineered Mn–Fe2O3 catalysts enable heterogeneous FeIV=O formation for enhanced Fe(VI)/H2O2 oxidation of organic pollutants

Zhengming He,Cong Li,Jingzhen Su,Kai Zhang,Jiaxue zhu,Ren Cai,Yunshu Zhang,Jieming Yuan,Xiaohong Guan

Iron-based catalysts are generally used to activate oxidizing species, such as hydrogen peroxide by increasing homogeneous active substances like free radicals, to promote the degradation of organic matter. However, less attention has been paid to the reactions on the surface or the generation of heterogeneous metal-oxo species. Herein, oxygen vacancies (Vo) were introduced into Fe oxides by a calcination-induced hetero-atom doping modification. The characteristic peak of the heterogeneous hypervalent iron-oxo [≡Fe IV =O] species in the UV–Vis spectrum at 371 nm was observed. In the context of electrochemical experiment, Vo-rich Mn-Fe 2 O 3 significantly enhanced the electron conduction of sulfamethoxazole and H 2 O 2 , while simultaneously inhibiting the self-decomposition of potassium ferrate (Fe(VI)). Regarding the H 2 O 2 generated during the self-decomposition process of Fe(VI), Vo-rich Mn-Fe 2 O 3 can accelerate the degradation of sulfamethoxazole, increasing the reaction rate to 0.1081 min −1 (with a 30.05 % improvement in removal efficiency). Density functional theory calculations indicate that Vo leads to an enhanced capture of O atoms by the low-coordinated Fe atoms, promoting the anchoring of H 2 O 2 and the formation of the active ≡Fe IV =O with a higher spin state. This work proposes heterogeneous reactive species on the surface of metal oxidase, constructing Vo as the O atom capture sites in iron-based oxides to facilitate the formation of ≡Fe IV =O and the degradation of organic compounds.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Journal of Environmental Chemical Engineering · 2024 · IF 7.4

Fabrication of Fe-based biomass aerogel with microwave assistance and its properties in the removal of tetracycline from wastewater

Guohua Du,Yu Yang,Long Tian,Xinyu Chen,Yuchen Zhang,Jingjing Zhao,Feiyang Luo,Shaoyun Shan,Tianding Hu,Yunfei He

The adsorption of tetracycline wastewater has garnered significant attention owing to its potential threats to human health and the ecological environment during excessive flooding. In this study, a novel Fe-based biomass aerogel (FGA) was synthesized using a microwave-assisted method for efficient tetracycline (TC) adsorption. FGA exhibited exceptional stability, wide adaptability, and excellent recyclability while demonstrated extremely high adsorption (up to 1366 mg·g −1 ) for TC at room temperature. The synthesized FGA was experimentally characterized through morphological observation and determination of chemical composition. The effects of different pH levels, initial concentration of TC, adsorption dosage, and coexisting inorganic ions on the adsorption performance of TC adsorption in experimental studies. The adsorption process of TC onto the FGA was heat-absorbing and spontaneous, aligning with the proposed pseudo-second-order kinetic model and Freundlich isothermal model. Electrostatic interaction, hydrogen bonding interaction, complexation and pore filling were identified as involved mechanisms during the adsorption process based on both characterization results and adsorption experiments.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF HAZARDOUS MATERIALS · 2018 · IF 6.434

Enhanced degradation of 2,4-dichlorophenoxyacetic acid by pre-magnetization Fe-C activated persulfate: Influential factors, mechanism and degradation pathway

Xiang Li,Minghua Zhou,Yuwei Pan

2,4-dichlorophenoxyacetic acid (2,4-D) is one of the most applicable herbicides in the world, its residue in aquatic environment threatens the human health and ecosystems. In this study, for the first time, inexpensive Fe-C after pre-magnetization (Pre-Fe-C) was used as the heterogeneous catalyst to activate persulfate (PS) for 2,4-D degradation, proving that Pre-Fe-C could significantly improve the degradation and dechlorination. The results indicated the stability and reusability of Pre-Fe-C were much better than pre-magnetization Fe 0 (Pre-Fe 0 ), while the leaching iron ion was lower, indicating that using Pre-Fe-C not only reduced the post-treatment cost, but also enhanced the removal and dechlorination efficiency of 2,4-D. Several important parameters including initial pH, Fe-C dosage, PS concentration affecting 2,4-D degradation and dechlorination by Pre-Fe-C/PS were investigated and compared with that of Fe-C/PS, observing a 1.2–2.7 fold enhancement in the degradation rate of 2,4-D. The Fe-C and Pre-Fe-C were characterized by scanning electron microscopy (SEM), energy dispersive X-ray (EDX) and SEM-EDX-mapping, suggesting that the content of Fe and O changed more obviously after magnetization. The degradation intermediates, such as chloroquinol, 2-chlorophenol, were identified by a gas chromatography mass spectrometry (GC/MS) and an ion chromatography (IC), and a possible degradation pathway was proposed.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
RSC Advances · 2018 ·Vol. 8 ·期 5 ·2338-2349 · IF 2.936

Activation of peroxymonosulfate by metal (Fe, Mn, Cu and Ni) doping ordered mesoporous Co3O4 for the degradation of enrofloxacin

Jing Deng,Chen Ya,Yongjian Ge,Yongqing Cheng,Yijing Chen,Mengyuan Xu,Hongyu Wang

Various transition metals (Fe, Mn, Cu and Ni) were doped into ordered mesoporous Co3O4 to synthesize Co3O4-composite spinels. Their formation was evidenced by transmission electronic microscopy (TEM), X-ray diffraction (XRD) and Brunauer–Emmett–Teller (BET) analysis. It was found that Co3O4-composite spinels could efficiently activate peroxymonosulfate (PMS) to remove enrofloxacin (ENR) and the catalytic activity followed the order Co3O4–CuCo2O4 > Co3O4–CoMn2O4 > Co3O4–CoFe2O4 > Co3O4–NiCo2O4. Moreover, through the calculation of the specific apparent rate constant (ksapp), it can be proved that the Co and Cu ions had the best synergistic effect for PMS activation. The Co3O4-composite spinels presented a wide pH range for the activation of PMS, but strong acidic and alkaline conditions were detrimental to ENR removal. Higher reaction temperature could promote the PMS activation process. Sulfate radical was identified as the dominating reactive species in Co3O4-composite spinel/PMS systems through radical quenching experiments. Meanwhile, the probable mechanisms concerning Co3O4-composite spinel activated PMS were proposed.

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
CHEMOSPHERE · 2021 · IF 7.086

A core-shell Mn–C@Fe nanocatalyst under ozone activation for efficient organic degradation: Surface-mediated non-radical oxidation

Ziyi Guo,Yuan Zhang,Dong Wang

A non-radical catalytic ozonation process functionalized by Mn(II)-sites was found effective to degrade oxalic acid as a typical refractory compound that is hard to remove through catalytic ozonation with hydroxyl radical oxidation. Specifically, we prepared functional Mn–C@Fe nanoparticles with carbon shell supporting Mn 3 O 4 for catalysis while encapsulating magnetic iron core for recycle. Batch study shows its excellent catalytic reactivity on the degradation of organics particular for the ozone-recalcitrant oxalic acid (20 min for 90.9% removal, kinetics constant of 0.045 min −1 ). Our mechanism study ruled out the hydroxyl radical oxidation, and highlighted the formation of a heptavalent Mn intermediate oxidant responsible for the fast degradation that was initiated via ozone activation of Mn(II)-sites on the carbon shell. Our findings underscore a non-radical catalytic ozonation as a promising alternative technology for the abatement of aqueous organic pollutants.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2016 · IF 5.31

Mineral transformation of structural Fe(II) hydroxides with O2, Cu(II), Cr(VI) and NO2− for enhanced arsenite sequestration

Binbin Shao,Yufan Chen,Deli Wu,Chaomeng Dai,Yalei Zhang

Structural Fe(II/III) hydroxides on the shell of nano-zerovalent iron (nZVI) are reactive sites for As(III) adsorption. Well-controlled structural Fe(II) hydroxides (SFH) is prepared to serve for As(III) removal in present study. With oxygen As(III) removal by SFH occurred efficiently but the removal efficiency was greatly reduced under anoxic conditions. The mineral transformation from SFH to lepidocrocite probably contributed to the robust removal efficiency of As(III). It is found that Cu(II), Cr(VI) and NO 2 − in aqueous solution could act as oxidants and promote the mineral transformation of SFH. A more efficient As(III) removal was therefore observed without oxygen. The removal efficiency decreased in the order O 2 /SFH   ≈   Cu(II)/SFH   >   Cr(VI)/SFH   ≈   NO 2 − /SFH at near neutral pH. The removal efficiency was less dependent on the initial pH for O 2 /SFH and Cu(II)/SFH systems than Cr(VI)/SFH and NO 2 − /SFH systems. Distribution of As on solid phases was able to describe the removal mechanism of As(III), and the results showed that the mineral transformation promoted the precipitation process and inhibited outer-sphere complexation, thus leading to enhanced As removal. With Cu(II), Cr(VI) and NO 2 − , the generation of oxidants from SFH transformation drove As(III) oxidation, and contributed to total As removal.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
RESEARCH ON CHEMICAL INTERMEDIATES · 2018 ·Vol. 44 ·期 5 ·3455-3474 · IF 1.674

The promotion effect of Fe on CeZr2O x catalyst for the low-temperature SCR of NO x by NH3

Sun Xiao,Guo Rui-tang,Li Ming-yuan,Sun Peng,Pan Wei-guo,Liu Shu-ming,Liu Jian,Liu Shuai-wei

Fe was used as the modifier to improve the performance of CeZr 2 O x catalyst for the selective catalytic reduction (SCR) reaction with ammonia. Experimental results revealed that proper Fe species (Fe/Ce molar ratio = 2) could effectively improve the SCR activity of CeZr 2 O x , along with the elevated resistance to SO 2 and H 2 O. The characterization results including BET, XRD, H 2 -TPR and NH 3 -TPD confirmed that Fe species in Fe 2 CeZr 2 O x catalyst could inhibit the formation of ZrO 2 crystals and lead to higher reducibility and surface acidity. In addition, more Ce 3+ and surface active oxygen species could be detected on Fe 2 CeZr 2 O x compared with CeZr 2 O x . By means of in situ DRIFT technique, it could be deduced that the SCR reaction process over Fe 2 CeZr 2 O x was accelerated mainly through theL–H pathway due to the advanced adsorption of NH 3 and NO x species, along with the promoted NO conversion to NO 2 . Therefore, the modification of CeZrO x catalyst by Fe had a significant stimulation effect on its low-temperature SCR performance.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。