BIO-MEDICAL MATERIALS AND ENGINEERING
·
2014
·Vol. 24
·期 1
·695-701
·
IF 0.847
Yu Deng-Guang,Li Xiao-Yan,Chian Wei,Li Ying,Wang Xia
The influence of different types of solvents as sheath fluids on the quality of electrospun ethyl cellulose (EC) nanofibers is investigated in this paper by a modified coaxial process. With 24 w/v % EC in ethanol as electrospinning core fluid and pure solvents including methanol, ethanol and N,N-dimethyl formamide (DMF) as sheath fluids, EC nanofibers were generated by the modified processes. Field emission scanning electron microscope observations demonstrate that the modified process is effective in improving the nanofibers' quality in terms of nanofibers' diameters, distributions and structural uniformity. The key of the modified coaxial process is the reasonable selection of the sheath solvents that is suitable for the drawing process of core EC fluid during the electrpospinning. The EC nanofibers' diameters (D, nm) could be manipulated through the reasonable selection of the type of the sheath solvents based on their boiling point (T, °C) D = 841–3.71T (R=0.9753). This paper provides useful methods for the implementation of the modified coaxial process controllably to obtain polymer nanofibers with high quality.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CARBOHYDRATE POLYMERS
·
2015
·
IF 4.074
Haizhen Chen,Jinping Ni,Jing Chen,Wenwen Xue,Jinggang Wang,Haining Na,Jin Zhu
Water and four small molecular alcohols are respectively used to activate corn cellulose (CN cellulose) with the aim to improve the dissolvability in DMAc/LiCl. Among all these activated agents, monohydric alcohols are found to produce the optimal effect of activation in the whole process including of activating, dissolving, and electrospinning of CN cellulose. Meanwhile, well distributed fibers with the diameter of 500 nm–2 μm are fabricated in electrospinning. Understanding the activation effect of monohydric alcohols with water and polyhydric alcohols, the most effective activated agent is ascertained with the characteristics of small molecular size, low viscosity, and single functionality. This work is definitely initiated to understand the critical principle of CN cellulose in dissolving. Accordingly, a feasible methodology is also established to prepare ultrafine cellulose fibers with good morphology in electrospinning.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
·
2014
·
IF 2.235
Qi-Ying Liu,Yu-He Liao,Tie-Jun Wang,Chi-Liu Cai,Qi Zhang,Noritatsu Tsubaki,Long-Long Ma
ZrP with large surface, mesoporous volume, and size was prepared. Its catalytic performance was evaluated in hydrolytic hydrogenation of cellulose to sorbitol/mannitol combined with commercial Ru/C. A significantly enhanced sorbitol/mannitol yield was obtained as compared with that of the water-soluble acidic phosphates and buffer solution of potassium acid phthalate combined with the same Ru/C. The enhanced yield was attributed to the Lewis and Brönsted acid on ZrP surface improving the surface’s absorption and activation for cellulose and accelerating the rate-determined hydrolysis step. The maximal sorbitol/mannitol yield of 63% and 81% could be obtained by using microcrystalline and ball milling cellulose as the feedstock, respectively. The ZrP combined with Ru/C was adaptable to the high concentrated cellulose and obtained 5.8 wt % of sorbitol/mannitol concentration. The remarkably enhanced cellulose hydrolysis by ZrP sharply decreased the use of Ru/C, which is significant for the essential application.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2015
·Vol. 133
·期 11
·
IF 1.768
Lian Tang,Yi Zheng,Shiyan Chen,Lei Wang,Huaping Wang
Flexible and nonpoisonous X-ray-shielding membranes supported by bacterial cellulose (BC) were prepared, in which X-ray-shielding materials were of microcapsule structure by using polyvinyl alcohol as shell and lead salt as core. The effect of the wall/core interaction and the amount of cross-linking agent were taken into consideration to find the optimal reaction conditions. The morphology, microcapsule size, and lead salt release properties were investigated. After supported by BC, the flexible and potable membranes for X-ray radiation protection were prepared and the shielding properties were evaluated, which indicated a good X-ray-shielding material. We set up a new method to prepare flexible and portable X-ray radiation protection membranes. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133 , 43120.
✓ 已验证
产品关联
DOI
高影响因子
Materials
·
2015
·Vol. 8
·期 6
·3168-3194
·
IF 2.651
Da-wei Wang,Ying-juan Xu,Xin Li,Chao-ming Huang,Kuo-shien Huang,Chuen-kai Wang,Jen-taut Yeh
The waterproof and strength retention properties of bacterial cellulose (BC)-reinforced thermoplastic starch (TPS) resins were successfully improved by reacting with sodium hexametaphosphate (SHMP). After modification with SHMP, the tensile strength (σf) and impact strength (Is) values of initial and conditioned BC-reinforced TPS, modified with varying amounts of SHMP(TPS100BC0.02SHMPx), and their blends with poly(lactic acid)((TPS100BC0.02SHMPx)75PLA25) specimens improved significantly and reached a maximal value as SHMP content approached 10 parts per hundred parts of TPS resin (phr), while their moisture content and elongation at break (ɛf) was reduced to a minimal value as SHMP contents approached 10 phr. The σf, Isand ɛfretention values of a (TPS100BC0.02SHMP10)75PLA25specimen conditioned for 56 days are 52%, 50% and 3 times its initial σf, Isand ɛfvalues, respectively, which are 32.5 times, 8.9 times and 40% of those of a corresponding conditioned TPS100BC0.02specimen, respectively. As evidenced by FTIR analyses of TPS100BC0.02SHMPxspecimens, hydroxyl groups of TPS100BC0.02resins were successfully reacted with the phosphate groups of SHMP molecules. New melting endotherms and diffraction peaks of VH-type crystals were found on DSC thermograms and WAXD patterns of TPS or TPS100BC0.02specimens conditioned for 7 days, while no new melting endotherm or diffraction peak was found for TPS100BC0.02SHMPxand/or (TPS100BC0.02SHMPx)75PLA25specimens conditioned for less than 14 and 28 days, respectively.Keywords:waterproof;strength retention;thermoplastic starch
✓ 已验证
产品关联
DOI
高影响因子
COLLOIDS AND SURFACES B-BIOINTERFACES
·
2013
·
IF 3.554
Chen Li,Zhuan-Hua Wang,Deng-Guang Yu
This study investigates the usage of a spinneret with a Teflon nozzle for fabrication of higher quality drug sustained-release electrospun nanofibers. Ethyl cellulose (EC) and quercetin were used as a filament-forming polymer matrix and an active pharmaceutical ingredient, respectively. The electrospinning was conducted using both a traditional stainless steel spinneret and a spinneret with a Teflon nozzle. Experimental results demonstrated that a Teflon-fluid interface at the spinneret's nozzle provided a better performance for implementing electrospinning than a traditional metal-fluid interface in the following aspects: (1) keeping more electrical energy on the working fluids for an efficacious process; (2) exerting less negative effect on the fluid to draw it back to the tube; and (3) making less possibility of clogging. The resulted nanofibers from the spinneret with a Teflon nozzle exhibited higher quality than those from the traditional spinneret in those: (1) smaller diameter and narrower distribution, 520 ± 70 nm for the former and 750 ± 280 nm for the later, as indicated by the field emission scanning electron microscopic images; and (2) better sustained-release profiles of quercetin from the former than the latter, as demonstrated by the in vitro dissolution tests. The new protocols about usage of Teflon as a spinneret's nozzle and the related knowledge disclosed here should promote the preparation and application of electrospun functional nanofibers.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CELLULOSE
·
2015
·Vol. 22
·期 1
·329-338
·
IF 3.573
Yu Yeli,Zhang Yong,Yang Xiaogang,Liu Hongyi,Shao Lan,Zhang Xiumei,Yao Juming
A cellulose-based superabsorbent exhibits excellent water absorbency and retention performance as well as biodegradability. However, the detailed biodegradation process in soil has not been monitored yet. Yellowing is another important factor affecting its appearance and storage. In this work, cellulose from flax yarn wastes (FYW) was used as the skeleton material to synthesize a cellulose-g-P(AA-co-AM) (FYW/PAA) superabsorbent. The properties of the FYW/PAA superabsorbent were characterized, especially its biodegradation process and yellowing mechanism. The resultant FYW/PAA presented excellent water absorbency and retention capabilities of 886 g/g in deionized water and 73.2 wt% after being dried at 60 °C for 12 h, respectively. The fracturing of β-1,4-glycosidic bonds on the flax-cellulose macromolecules is the main reason for the biodegradation of FYW/PAA in soil. This causes a 70.8 wt% degradation after FYW/PAA has been buried in soil for only 60 days. The drying method and UV irradiation have important implications for the yellowing of FYW/PAA. They facilitate the generation of chromophore and auxochrome groups on the flax-cellulose macromolecules. 2,6-Di-tert-butyl-4-methylphenol (BHT) exhibits excellent antioxidant properties to inhibit the yellowing of FYW/PAA products.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2014
·
IF 4.058
Jing Wang,Xiaoyan Lin,Xuegang Luo,Yufeng Long
A novel sorbent for the removal of fluoride is prepared by immobilizing Zr(IV) on carboxymethyl cellulose sodium (CMC-Zr). Batch adsorption experiments are performed on factors of pH, temperature, initial fluoride concentration, adsorbent dosage and contact time to evaluate the adsorption capacity. The results show that the saturation adsorption capacity is 47 mg/g at pH 4.0, 25 °C, concentration 300 mg/L for 24 h. Adsorption process could be well described by Langmuir isotherm model. The adsorption kinetic data is fitted well with pseudo-second-order model. Thermodynamic parameters are also evaluated and the results indicate that adsorption of fluoride on CMC-Zr is a spontaneous and endothermic process. The mechanism of modification and adsorption process on CMC-Zr is analyzed by FT-IR, SEM-EDX and XPS. Results show that Zr(IV) is loaded on CMC through ion exchange of sodium of CMC and surface adsorption, coordination reaction happened during the adsorption process between CMC-Zr and fluoride. CMC-Zr adsorbent is a promising adsorbent for the removal of fluoride from aqueous solutions.
✓ 已验证
产品关联
DOI
高影响因子
ACS Sustainable Chemistry & Engineering
·
2017
·
IF 5.951
Qiuhong Bai,Qiancheng Xiong,Cong Li,Yehua Shen,Hiroshi Uyama
This study deals with hierarchical porous carbons from bacterial cellulose (BC), having a layered structure for high-performance application, such as supercapacitor electrodes, fabricated from a composite monolith with unique microscopic/macroscopic morphology. A poly(methyl methacrylate) (PMMA)/BC composite monolith was first synthesized by thermally induced phase separation using ethanol and deionized water as solvents, where BC acts as the main carbon source as well as matrix and PMMA acts as the activator source producing the necessary activation material. Scanning electron microscopy analysis showed that a monolithic skeleton of PMMA was loaded uniformly on the nanofibers of BC to form a three-dimensional entangled structure of the PMMA skeleton and BC nanofibers, as observed in the microscopic view. Furthermore, the macroscopic two-dimensional layered structure of BC remained in the as-obtained composite. The specific surface area, structural features, and thermal stability were investigated by Brunauer–Emmett–Teller, X-ray diffraction, and thermogravimetric analysis studies. The resulting PMMA/BC composite was carbonized and activated by KOH at 850 °C. The electrochemical properties were characterized by cyclic voltammetry, galvanostatic charge–discharge, and electrochemical impedance spectroscopy showing that the carbonization product of the composite displayed a high specific capacitance of 266 F g–1 at a current density of 0.50 A g–1 and the energy density reached a maximum of 23.6 W h kg–1 at a power density of 200 W kg–1. Moreover, 95% of the capacitance was retained after 10,000 charge–discharge cycles, which implies exceptionally high cyclic stability. This compatible and excellent electrochemical performance of the composite, in terms of the energy density and capacitance retention, can be contributed to the characteristic porous structure of the precursor composite monolith. The present research delineates a new approach to fabricate high-performance supercapacitor materials and low-cost energy storage devices from inexpensive bioresources.
✓ 已验证
产品关联
DOI
高影响因子
CELLULOSE
·
2017
·Vol. 24
·期 11
·5025-5040
·
IF 3.417
Lin Fengcai,You Yuzhe,Yang Xuan,Jiang Xin,Lu Qilin,Wang Ting,Huang Biao,Lu Beili
A facile, green and efficient microwave-assisted method was developed to oxidize cellulose hydrogel beads with neutral 2,2,6,6-tetramethylpiperidinyl-1-oxyl radical (TEMPO)-mediated system. Resulting cellulose beads were investigated by scanning electron microscopy, solid-state 13 C-NMR spectra, and X-ray diffraction. The patterns of 13 C-NMR spectra indicated that the oxidation occurred only at C6 primary hydroxyl carbon, and the carboxyl groups amounted to 1.28 mmol/g in the cellulose beads. The TEMPO-oxidized cellulose beads showed highly porous structures consisting of nano-sized fibrils with retention of original spherical shapes, and the crystallinity index of the cellulose II almost unchanged after oxidation. The maximum adsorption capacity of rhodamine B, auramine O, malachite green and methylene blue on the TEMPO-oxidized cellulose beads was found to be 609, 537, 740 and 873 mg/g, respectively, and the adsorption process was well described by pseudo-second-order kinetics. In addition, desorption tests showed that TEMPO-oxidized cellulose beads could be regenerated by acid treatment and used repeatedly. Thus, TEMPO-oxidized cellulose beads prepared by microwave irradiation can be potentially used for the removal of organic dyes from industrial wastewater.
✓ 已验证
产品关联
DOI
高影响因子
CARBOHYDRATE POLYMERS
·
2017
·
IF 4.811
Zhangqiang Yang,Junhui Si,Zhixiang Cui,Jianhua Ye,Xiaofeng Wang,Qianting Wang,Kaiping Peng,Wenzhe Chen,Shia-Chung Chen
An appropriate surface chemical property is crucial in tissue engineering scaffolds, which promotes cell attachment and proliferation. A biomimetic composite scaffold with a polydopamine (PDA) coating layer on electrospun poly(lactic acid) (PLA)/cellulose nanofibrils (CNF) composite nanofiber was developed in this study. PLA/CNF composite nanofibers were fabricated and then coated via treatment with a dopamine solution. The PDA coating layer was successfully formed on the surface of the PLA/CNF composite nanofiber by using a simple, environment-friendly, and effective procedure. Results indicated that the addition of CNF into the PLA matrix can effectively improve the deposition rate of the PDA coating layer on the surface of the composite nanofiber during the initial stage of coating because of hydrogen bonding between the CNF and PDA molecular chains. The hydrophilicity and mechanical properties of the PLA/CNF–PDA scaffold were higher than those of the PLA/CNF scaffold. In addition, the cell culture test showed that the adhesion, proliferation, and growth of human mesenchymal stem cells (hMSCs) cultured on the PLA/CNF–PDA scaffold were significantly enhanced relative to those cultured on the PLA/CNF scaffold because of the introduction of the PDA coating. This finding suggested that surface biofunctionalization via the PDA coating layer could simply and effectively enhance cell biocompatibility for polymer-based scaffolds.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Materials Chemistry C
·
2016
·Vol. 5
·期 6
·1402-1408
·
IF 5.066
Yan Ke,Guowen Meng,Zhulin Huang,Ningning Zhou
For surface-enhanced Raman scattering (SERS)-based detection, it is desirable that the SERS substrates should not only have high SERS sensitivity, but also remarkable SERS-signal reproducibility and a good affinity for the target analytes. Herein, we report large-area membranes of plasmonic Ag-nanocubes (Ag-NCs) embedded in cellulose acetate (CA) microspheres (MSs) (denoted as Ag-NCs@CA-MSs), achieved by the electrospray technique, as highly sensitive and extremely homogeneous SERS substrates with good capture ability for analyte molecules in an aqueous solution. As a result, p-aminothiophenol (a probe molecule) and methyl parathion (a toxic pesticide) with concentrations down to 10−9 M and 10−7 M could be detected, respectively. Importantly, the membranes showed remarkable SERS-signal homogeneity over a large area, with a relative signal deviation down to 2.8% in a 500 × 500 μm2 area and 9.6% for the whole substrate (5 × 5 mm2). Moreover, Langmuir nonlinear fitting of the Raman intensity against the methyl parathion concentration was achieved, with a double-reciprocal plot of the Raman peak intensity versus the concentration showing a good linear relationship, making it possible for the quantitative SERS-based detection. Therefore, the Ag-NCs@CA-MS membranes showed potential for the quantitative SERS-based analysis of organic pollutants in the aqueous solution.
✓ 已验证
产品关联
DOI
高影响因子