Materials Today Energy
·
2026
·
IF 8.1
Yang Wang,Yiling Feng,Yuxin Zhu,Yizhen Li,Chengjin Chen,Nanjia Yang,Wei Zhu,Zhongbin Zhuang
The electrochemical ethanol oxidation reaction (EOR) in acid offers a promising route for co-producing hydrogen and value-added chemicals, but suffers from severe Pt catalyst poisoning and poor stability. Herein, we report the synthesis of ultrathin PtNi nanowires (NWs) with abundant step defects for efficient and stable EOR. The PtNi NWs/C catalyst exhibits high mass activity (1.50 A mg Pt −1 @0.7 V vs. RHE), Faradaic efficiency (80% to acetic acid), and stability compared to the Pt NWs/C and Pt NPs/C counterparts. It has been demonstrated that the ultrathin NW structure endowed the PtNi NWs/C with high electrochemical active surface area and abundant step sites, while the incorporation of Ni facilitates the removal of poisoning CO and accelerates the EOR kinetics on Pt via the in-situ formation of Ni(III), leading to the superior performance. A practical electrolyzer using the PtNi NW as the anodic catalyst achieves 132 mA cm −2 at 0.8 V and sustains operation for 100 h.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2024
·
IF 13.3
Qunwei Guo,Xiaokun He,Jiaqi Geng,Jiawen Pan,Yuan Xue,Nan Xu,Bo Chi,Jian Pu
In this work, Ru is incorporated into Ni/Co to synthesize novel Al 2 O 3 -supported Ni-Ru/Co-Ru bimetallic catalysts. Tests verify their enhanced catalytic capability and durability and also reveal how each catalyst is deactivated. SEM and EDS results indicate that nanoparticle agglomeration on Ni-based surface triggers deactivation, and TG and XPS results suggest carbon deposition is fatal to Co-based catalysts. Implementing Ru effectively enhances catalytic activity and durability. To gain insight into the promoting effect of Ru, quantum mechanical methods are utilized to investigate the shifts in activation energies (E a ) in CH x * dehydrogenation processes on (1 1 1) surfaces. For the Ni catalyst, DFT calculations indicate that adding Ru decreases E a yet does not change the determining step. In contrast, adding Ru on the Co surface changes the major intermediates from CH* to CH 2 *, which inhibits further dehydrogenation , and hence mitigates carbon deposition to preserve the catalytic activity of the surface.
研究领域:
催化化学
·
材料科学
·
化学工程
·
量子化学
·
能量转换
✓ 已验证
DOI
高影响因子
RSC Advances
·
2015
·Vol. 5
·期 96
·79022-79030
·
IF 3.84
Lei Xu,Xiaoqiong Lu,Xiaomin Cheng
A series of novel cotton cellulose-graft-polycaprolactone copolymers with different grafting contents were successfully prepared via ring-opening polymerization (ROP) in an ionic liquid 1-N-butyl-3-methylimidazolium chloride ([Bmim]Cl). The structures of the grafting copolymers were systematically characterized by FTIR, CP/MAS13C-NMR, XRD, SEM and AFM, while thermal properties were investigated by DSC and TGA. Subsequently, Langmuir, Freundlich, Temkin, and Dubinin–Radushkevich (D–R) adsorption isotherms were representative to simulate adsorption isotherms of Cu(II) and Ni(II) ions in aqueous solution. From the comparison of different adsorption isotherm models, it was found that adsorption of Cu(II) by modified cellulose followed Langmuir, Freundlich and Temkin models, while that of Ni(II) followed the Freundlich model. The results of adsorption indicated that the selectivity sequence of metal ions on graft copolymers was Cu(II) > Ni(II) and the maximum removal capacities of Cu(II) and Ni(II) ions were 98.7% and 35.6%, respectively. Hence, the graft copolymers exhibited significant potential to be an environmentally feasible biosorbent for removal of Cu(II) and Ni(II) ions from aqueous solution.
研究领域:
环境科学
·
高分子化学
·
材料科学
·
重金属去除
·
吸附技术
✓ 已验证
DOI
高影响因子
ACS Sustainable Chemistry & Engineering
·
2022
·
IF 9.224
Hengyu Hao,Yuya Abe,Haixin Guo,Xiao Zhang,Richard Lee Smith Jr
Bifunctional Lewis (L) acid (Ni- or Hf-) site–Brønsted (B) acid catalysts designed to promote transfer hydrogenation reactions were prepared via hydrothermal and solvothermal methods using safe mixed solvents and sustainable precursors. By using N,N-dimethylformamide as a basis for the desired basicity, mixed solvents could be identified that allowed catalysts to be prepared with tunable ratios of Lewis to Brønsted acid sites (L/B). The as-prepared catalysts promoted transfer hydrogenation of furfural and ethanolysis to form ethyl levulinate (EL) using ethanol as a solvent and hydrogen donor source. Among the catalysts, sulfonated Hf-catalysts prepared with a cyclopentanone/formic acid mixed solvent (Hf-CPN/FA) with an L/B ratio of 6.4 gave 95% furfural conversion with 51.9% yield of EL, while the sulfonated Hf catalyst prepared with a cyclopentanone/γ-valerolactone mixed solvent (Hf-CPN/GVL) with a total Lewis and Brønsted acid site amount of 85.1 μmol/g gave 100% furfuryl alcohol (FAL) conversion with 72.5% yield of EL. Brønsted acid sites promoted reversible acetalization of furfural with ethanol into 2-furaldehyde diethyl acetal, while Lewis acid sites promoted furfural transfer hydrogenation into FAL and EL and further conversion into γ-valerolactone. The methods developed in this work eliminate dipolar aprotic solvents and harsh acids used in catalyst synthesis and allow sustainable production of EL from biomass-related chemicals.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2022
·
IF 16.744
Jiahao Ren,Siqi Huo,Guobo Huang,Tianle Wang,Jiabing Feng,Wei Chen,Shenwei Xiao,Pingan Song
The ubiquitous application of highly flammable acrylonitrile–butadienestyrene (ABS) resin has brought great fire threat to human and environment. Unfortunately, current flame retardants often improve flame retardancy but reduce mechanical and thermal properties, seriously affecting their practical application. We herein reported novel multifunctional, high-efficiency, phosphorus and nickel co-doped graphitic carbon nitride (Ni-P-C 3 N 4 ) nanoflakes to address the trade-off between flame retardancy and mechanical/thermal properties. The addition of 2.0wt% of Ni-P-C 3 N 4 increased the initial degradation temperature and tensile strength of ABS composite (ABS/Ni-P-CN2) by 15 °C and 24.3% relative to virgin ABS, indicating its positive effect on thermal and mechanical properties. Compared with ABS, ABS/Ni-P-CN2 exhibited a notable increase in time to ignition, along with 32.4% and 33.8% reductions in peak heat release rate (PHRR) and peak smoke production rate (PSPR), demonstrating excellent anti-ignition, flame-retardant and smoke-suppressive performances. The increased fire safety was mainly due to the physical barrier effect of g-C 3 N 4 nanosheets and the catalytic charring effect of P and Ni. This work offers a novel design strategy to create multifunctional flame retardants for fabricating fire-safe polymer composites with superior thermal and mechanical properties, holding great potential in industries.
✓ 已验证
产品关联
DOI
高影响因子
FUEL
·
2022
·
IF 8.035
Chengming Huang,Yiming Zhang,Dingmei Han,Binbin He,Xinyu Sun,Meiyu Liu,Yi Mei,Yun Zu
Ni-based catalysts using siliceous materials as the supports have suffered from two challenging issues of sintering and carbon deposition for dry reforming of methane (DRM), resulted from a weak metal-support interaction. Given these, a novel metal–acid bifunctional Ni@S-1 zeolite catalyst is tailored from the evolution of hydroxylated nickel phyllosilicates that are formed by subtly controlling the coordination environments of Ni precursor complexes in the silicalite-1 (S-1) zeolite. The developed Ni 0.44 @S-1 catalyst renders almost equivalent CH 4 and CO 2 conversions (85.1 % and 88.7 %), high H 2 /CO molar ratio (about 1) and superb long-term stability during 100 h with no activity loss at 750 °C with a WHSV of 100 L·g cat −1 ·h −1 , outperforming other control catalysts under investigation. Such superior catalytic behavior benefits from the synergy between highly uniform Ni nanoparticles (3–5 nm) confined in the micropores of zeolite and substantially formed Lewis acid sites due to coordinatively unsaturated Ni 2+ sites located at the reduced 2:1 nickel phyllosilicate, as revealed by detailed characterizations. Meanwhile, it further discloses that a benign balance between formation and elimination of “process carbon” species is responsible for improving the carbon resistance of catalyst during the DRM reaction. The present design broadens a new insight for the development of new Ni-based catalysts with simultaneous coking- and sintering-resistant for the DRM application.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF RARE EARTHS
·
2022
·
IF 4.632
Tingting Bao,Hui zhou,Yi Zhang,Chenxu Guo,Wenming Guo,Hang Qin,Pengzhao Gao,Hanning Xiao,Weixiong Liu
Ni/CeO 2 catalysts ( n CeO2 : n Ni = 0, 1, 4, 7, 10) supported on SiC porous ceramics for ethanol steam reforming (ESR) were investigated with respect to hydrogen production performance and growth of carbon deposition. The oxygen released from CeO 2 enables the oxidation of CH x species to serve as carbon precursors, thus providing Ni/CeO 2 catalysts with stronger resistance to carbon deposition compared with Ni catalysts. The Ni/CeO 2 catalysts prepared by inverse microemulsion and impregnation methods exhibit regular semicircular spherical shape on SiC porous ceramics. Under 500 °C for 25 h of ESR reaction, the ethanol conversion rate over Ni/CeO 2 catalysts ( n CeO2 : n Ni = 7) is sustained up to 100% and H 2 selectivity is essentially kept at 74%. The by-product selectivity declines stepwise with increasing content of CeO 2 , which is attributed to the adsorption and oxidation of CO and of CH x species as CH 4 precursor from CeO 2 . The scanning electron microscopy (SEM) and transform electron microscopy (TEM) results reveal that further loading of CeO 2 on the surface of Ni catalysts can alleviate both migration and sintering of Ni particles. Furthermore, carbon deposition on Ni/CeO 2 catalysts preferentially outgrow filamentous rather than amorphous carbon , with a tendency for the latter to be more deactivated.
✓ 已验证
产品关联
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2022
·
IF 9.136
Yafei Guo,Guodong Wang,Jun Yu,Pu Huang,Jian Sun,Ruilin Wang,Tao Wang,Chuanwen Zhao
Transition metal oxides (TMOs) doping is proposed as one effective strategy to improve CO 2 capture and conversion performance of Ni-CaO dual function materials (DFMs). The effect of single and binary TMOs doping on structure–property-activity relationships of Ni-CaO DFMs for integrated CO 2 capture and in-situ reverse water gas shift (RWGS) is investigated. ZrO 2 doping enhances the surface basicity and reducibility of Ni-CaO DFMs for improved CO 2 uptakes and reinforced catalytic activity. ZrO 2 doping also endows Ni-CaO DFMs with improved working stability by forming CaZrO 3 solid solution, which acts as physical barrier to retard the agglomeration and sintering of CaO and NiO species. Doping binary metal oxides of ZrO 2 -CeO 2 further boosts the oxygen vacancy concentration in the DFMs for promoted CO 2 activation and conversion and stabilized CO yield. The desired Ni-CaO-6ZrO 2 -6CeO 2 DFMs shows a higher CO 2 conversion of 72.1% and a lower decay rate of 12.0% for CO yield in consecutive cycles.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2022
·
IF 16.744
Zhaopeng Xia,Jiajun Pan,Hao Chen,Nanping Deng,Chao Yang,Xiaochen Liu,Yong Liu,Liwei Wu
Many researches are devoted to design the wearable fibrous energy storage devices with miniaturization in order to satisfy the large demand of power for portable wearable electronics. As a kind of flexible battery, one-dimensional yarn-like nickel-zinc (Ni-Zn) battery has a lot of disadvantages such as low energy density and poor power density. Significantly, metal–organic framework (MOF) material provides an opportunity to solve the preceding shortcomings due to its porous structure, excellent specific surface area and multi-functionalization. In this study, the nickel cobalt layered double hydroxides (NiCo LDHs) with triangular micro sheet array and nano sheet structure is designed and prepared on silver coated nylon fibers (SCNF) as the flexibly fibrous Ni-Zn battery cathodes (SCNF@Ni@MOF@NiCo LDHs yarn electrode), which have high specific surface area and super structure stability even during bending of the yarn. Therefore, the cathodes have abundant active sites, excellent electron conduction and fast ion diffusion. The assembled aqueous Ni-Zn battery is featured with suitable capacitance (342 mAh/g at 7.6 A/g), appropriate energy density (572.5 Wh/g at 2.59 W g −1 ) and superior stability (55 % after 5000 cycles). In addition, the obtained one-dimensional yarn-like Ni-Zn battery has excellent flexibility and high capacity retention (90 % after 1000 bends and over 80 % after different deformation ways such as bend, squeeze and twist). These fascinating results demonstrate that the SCNF@Ni@MOF@NiCo LDHs yarn electrode have great application potential in wearable energy storage devices.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2023
·
IF 9.9
Neng Chen,Sai Che,Hongchen Liu,Guohua Li,Na Ta,Feng Jiang Chen,Bo Jiang,Ni Wu,Zhengxuan Li,Weiqi Yu,Fan Yang,Yongfeng Li
The regulation of the multi-dimensional interface plays an important role in optimizing the electron transport and gas mass transfer during catalysis, which is conducive to promoting the electrocatalytic process. Herein, a self-supporting electrode has been developed with the multistage interface within 3D Ni 2 P@C nanospheres/nanoflowers arrays derived from metal-organic frameworks (MOFs) as template skeletons and precursors. The constructed nanosphere interface protrudes outward to optimize the contact with the electrolyte while the nanoflower lamellar connection promotes rapid electron transfer and exposes more active sites, and accelerates the gas diffusion with the abundant interspace channels. According to theoretical calculation, the synergistic effect between Ni 2 P and C is conducive to the optimal adsorption and desorption of H*, thus contributing to the improvement of catalytic kinetics. With the optimized growth times assembled onto nickel foam substrates, the Ni 2 P@C-12 h requires overpotentials of only 69 mV and 205 mV to drive the current density of 10 mA cm −2 towards hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), respectively. And it reveals an ultralow cell voltage of 1.55 V at 10 mA cm −2 to achieve overall water splitting (OWS). In addition, the stability of the Ni 2 P@C/NF electrocatalyst emerges as prominent long-term stability, which is attributed to the carbonaceous nanosphere anchors on the substrate to minimize the possibility of oxidation of the catalyst surface. This strategy of in situ growth of MOF-derived phosphates provides a general idea for interfacial engineering modification of OWS electrode materials.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Applied Materials & Interfaces
·
2022
·
IF 10.383
Guolong Sang,Chao Wang,Yi Zhao,Ge He,Qifan Zhang,Minghao Yang,Shihui Zhao,Pei Xu,Xiaoqing Xi,Jinlong Yang
Ingenious microstructure design and appropriate multicomponent strategies are still challenging for advanced electromagnetic interference (EMI) shielding materials with excellent shielding effectiveness (SE) and reliable mechanical properties in harsh environments and low filling levels. In this study, nickel@multiwalled carbon nanotubes/alumina (Ni@CNTs/Al2O3) ceramic composites with segregated structures and electric/magnetic-coupling networks anchored by CNTs and magnetic Ni nanofillers were prepared by hot-press sintering. CNTs/Al2O3 ceramic composites exhibit a percolation threshold of only about 0.32013 vol %, which is lower than those of other reported CNTs/Al2O3 composites with segregated or uniformly dispersed structures. The electrical conductivity and EMI SE of 9CNTs/Al2O3 ceramic composites with 9 vol % (4.76 wt %) CNT content were 103.1 S/m and 33.6 dB, respectively. In addition, EMI SE and toughness were both enhanced by the synergistic effect of Ni nanoparticles and CNTs. In the unit of a segregated structure, a three-dimensional (3D) electric/magnetic-coupling network effectively captures and attenuates electromagnetic wave energy by electrical conduction, dielectric loss, and magnetic loss. On the other hand, the pull-out of CNTs and deflection of cracks distributed along the segregated structures synergistically enhance the fracture toughness of Ni@CNTs/Al2O3 ceramic composites. High-performance 3Ni@5CNTs/Al2O3 ceramic composites with 5 vol % (2.64 wt %) and 3 vol % (0.76 wt %) CNT contents have been achieved, whose EMI SE is 41.8 dB, density is 90.99%, flexural strength is 197.83 ± 18.62 MPa, and fracture toughness is 6.03 ± 0.23 MPa·m1/2. This efficient method provides a promising way to fabricate EMI shielding ceramic composites with high mechanical properties.
✓ 已验证
DOI
PubMed
高影响因子
ELECTROCHIMICA ACTA
·
2022
·
IF 7.336
Muhammad Waqas,Chengzhou Liu,Qiulan Huang,Xiaoxia Zhang,Youjun Fan,Zhe Jiang,Xiaoqu Wang,Wei Chen
Precise control over the structure and morphology of nano/microarchitectures is the topic of immense interest to tune their physical features and chemical aspects for desired applications. In this work, a novel and effective Ni(OH) 2 three-dimensional nanosheet-coated marigold-like ZnO microflower (mg-ZnO@Ni(OH) 2 NSs) hybrid is designed for the nonenzymatic electrochemical determination of glucose. The morphological evolution of mg-ZnO and mg-ZnO@Ni(OH) 2 NSs was achieved by a one-pot solvothermal strategy through control over the reaction conditions without any assistance of an external shape-controlling surfactant. Furthermore, the as-fabricated mg-ZnO and mg-ZnO@Ni(OH) 2 NSs were systematically evaluated by different spectroscopic, microscopic and electrochemical characterization tools. The results indicate that highly exposed homogeneous nanocorners of mg-ZnO and the synergetic effect of Ni(OH) 2 coating, collectively improve the electrocatalytic efficiency of the designed catalyst. The mg-ZnO@Ni(OH) 2 NS-based sensing electrode exhibits excellent amperometric performance for glucose monitoring, comprising satisfactory sensitivity (259.78 and 62.82 μA mM −1 cm −2 ), wide linear range (0.084–0.941 mM and 0.941–6.50 mM), low limit of detection (0.06 µM, S / N = 3), good stability and high detection selectivity. Moreover, the designed sensor is promising for the potential application in the real-time glucose detection of human serum samples.
✓ 已验证
产品关联
DOI
高影响因子