International Journal of Minerals Metallurgy and Materials
·
2026
·Vol. 33
·期 8
·2541-2552
·
IF 8.8
Wei Xinlei,Sun Yongsheng,Wei Xiaotong,Gao Peng
Malachite, a typical copper oxide ore, exhibits strong hydrophilicity; therefore, it also exhibits poor flotation recovery. In this study, sulfidation roasting was applied as a pretreatment strategy to improve the flotation efficiency of malachite. Pyrite was used as the sulfidation agent during roasting, the feasibility of which was verified using thermodynamic calculations. Microflotation experiments demonstrate that the flotation recovery of malachite increased by nearly 70% compared with that of the untreated sample. X-ray diffraction analysis indicates that the malachite decomposed into CuO during roasting and mainly formed CuS and Cu 2 S after sulfidation. This result was further supported by X-ray photoelectron spectroscopic analysis, which revealed the presence of S (S 2− , S
2− 2
, and S
2− n
) and Cu (Cu + and Cu 2+ ) species in different oxidation states on the surfaces of the roasted sample, as well as a notable decrease in oxygen content. In addition, the formation of copper sulfides disrupted the original porous structure, which led to a decrease in internal pore size. The contact angle increased from 43.71° to 89.29° after sulfidation roasting, indicating that the hydrophobicity of malachite improved markedly. Zeta potential results further indicate that the surface electronegativity increased owing to the adsorption of S species. Overall, sulfidation roasting using pyrite improved the floatability of malachite by generating hydrophobic copper sulfides on the mineral surfaces, thereby demonstrating its potential as an effective pretreatment for copper oxide ores.
✓ 已验证
产品关联
DOI
高影响因子
CHINESE JOURNAL OF POLYMER SCIENCE
·
2026
·
IF 4.6
Cen An-Ning,Zhu Yin-Da,Xu Ke,Wen De-Zhong,Wu Tong-Fei,Cao Nuo,Tian Xue-Lin
Passive anti-icing approaches utilizing icephobic surfaces present innovative solutions that require minimal energy, are simple to maintain, and are environmentally sustainable, garnering considerable interest. However, icephobic surfaces may encounter challenges related to environmental adaptability, which diminishes their durability. To mitigate this issue, we developed soluble polydimethylsiloxane covalent adaptable networks (PDMS CANs) for low-modulus icephobic coatings with intrinsic self-repairing capability. These soluble PDMS CANs were synthesized from diol-terminated PDMS, which underwent dynamic end-cross-linking through dioxaborolane linkages. The end-linked structure enabled dissolution in solvents such as ethyl acetate. Once the solvent was removed, the dynamic cross-linked networks re-formed. This feature made PDMS CANs suitable for processing methods such as solution casting or coating. The cross-linking density of the CANs could be modified by varying the chemical formulation. The effects of cross-linking density on mechanical properties, self-repairing capability, and icephobic performance were examined. To further enhance deicing performance, silicone oil was incorporated into the PDMS CANs as a lubricant. The relationship between icephobic performance and oil content was explored. The optimal ice adhesion strength, achieved at an oil content of 40 wt%, was approximately 7.1 kPa at −0 °C. The coatings demonstrated good durability throughout icing-deicing cycles. This study highlights the potential of self-repairing, low-modulus elastic coatings based on CANs for large-area deicing applications.
✓ 已验证
产品关联
DOI
高影响因子
CHINESE JOURNAL OF POLYMER SCIENCE
·
2026
·
IF 4.6
Ye Cong-Yang,Feng Ze-Yu,Li Jia-He,Wang Di,Xu Xiang-Xiang,Xie Yi-Fan,Zhang Hong-Li,Zou Gang
The development of multi-mode and multi-level optical anti-counterfeiting systems holds tremendous significance for advanced information encryption and modern security. Herein, we developed a high-level information encryption platform based on a stimuli-responsive perovskite/polydiacetylene (PDA)/poly(vinyl alcohol) (PVA) composite hybrid film. By strategically integrating luminescent perovskite nanocrystals onto a twisted-stacking uniaxially oriented PDA/PVA heterostructure, three distinct optical dimensions, including pattern morphology, bright photoluminescence, and high-performance circularly polarized luminescence (CPL, with g lum up to 1.0), were successfully coupled into a single flexible platform. Crucially, the three diverse optical channels can be operated independently without mutual interference. By leveraging the fast halogen anion exchange of the perovskite layer and the thermochromic phase transition of the PDA layer as orthogonal cryptographic keys, precise and reversible modulation of each optical mode was achieved. This dual-stimulus response mechanism enables a dynamic, multistage decryption profile that successfully transitions from a predefined camouflage state to authentic target information. This programmable and flexible hybrid film provides an innovative crosstalk-free paradigm for next-generation anti-counterfeiting and hierarchical information encryption.
✓ 已验证
产品关联
DOI
高影响因子
CELLULOSE
·
2023
·
IF 5.7
Chen Xinyue,Yang Mingyan,Cai Xiaodan,An Linyu,Lai Kunrong,Dou Yan
Cellulose nanofibril (CNF) composite aerogels have been the focus of studies in organic solvent absorption and oil removal fields due to their low density, high absorption capacity, nontoxicity, and biodegradable properties. However, the complicated pretreatment process and increasing environmental concerns restrict the large-scale application of CNF-based materials. Herein, hydrophobic lignin containing nanofibril (LCNF)/poly (vinyl alcohol) (PVA) aerogels (LPAs) were prepared through freeze-drying and thermal chemical vapor deposition (CVD) of methyl trichlorosilane (MTMS). The Fourier Transform Infrared Spectroscopy (FT-IR) result showed that the hydrophobic siloxane coating was successfully prepared on the LPA scaffold. The Field Emission Scanning Electron Microscope (FE-SEM) result showed that the modified LPAs (M-LPAs) exhibited three-dimensional interpenetrating network structure. The aerogel presented outstanding physical properties including low density of 12.95 ± 0.40 mg/cm 3 , high porosity of 98.99%, high flexibility, and enhanced compressibility due to its homogenous porous structure. The wettability test revealed that the aerogel, with a water contact angle (WCA) up to 146 ± 2°, was highly hydrophobic. The M-LPAs exhibited absorption capacity for various oils and organic solvents and the maximal absorption capacity of M-LPA-0.25 for chloroform could reach 106.80 ± 4.97 g/g aerogel. In addition, M-LPA-0.25 was capable of separating emulsified water/oil mixtures, which extends its potential application. Notably, the aerogel demonstrated good reusability because it still maintained more than 61% of its original absorption capacity after 10 extrusion cycles. The facile technique for the preparation of LCNFs from low-cost lignocellulosic biomass without a chemical bleaching process is green, sustainable. Thus it can be used to fabricate high-efficiency LCNF-based absorbents from agricultural waste for the removal of the oil and industrial organic solvent spills.
✓ 已验证
产品关联
DOI
高影响因子
Biomass Conversion and Biorefinery
·
2022
·
IF 4.05
Lu Xiaoluan,Ma Xiaoqian
The reduction of heavy metal (HM) risk while realizing energy utilization of sewage sludge (SS) remains an important challenge for SS treatment. The effects of pretreatment and additives (citric acid (CA), ferric chloride (FC), and fulvic acid (FA)) were explored based on co-hydrothermal carbonization (co-HTC) of SS and bamboo (BO). The results showed that the use of FC and FA pretreatment was beneficial in reducing the potential ecological risk of HMs and total concentration of Cu, Cr, and Ni. However, in terms of fuel properties, compared to pretreatment, additives were more beneficial in improving the fuel ratio and the high heating value (HHV). Specifically, among all samples, the maximum values of fuel ratio (0.49), HHV (12.85 MJ/kg), and combustibility index (8.00) were all achieved by employing different additives. It was worth noting that FC could not only improve fuel ratio but also obtain a low risk index (14.38) when used as an additive. Therefore, although pretreatment was more efficient in reducing the risk of HMs, additives could improve the fuel properties while alleviating the HMs risks to a certain extent. These findings contributed to the optimization of the HTC process of SS.
✓ 已验证
DOI
高影响因子
JOURNAL OF FLUORESCENCE
·
2023
·
IF 2.7
Liu Yinghua,Duan Wenxiu,Li Huiqing,Wu Jiang,Liu Dan,Mi Jiaying,Qi Shengda,Ren Cuiling,Chen Hongli
Multi-targets detection has obtained much attention because this sensing mode can realize the detection of multi-targets simultaneously, which is helpful for biomedical analysis. Carbon nanoparticles have attracted extensive attention due to their superior optical and chemical properties, but there are few reports about red emission carbon nanoparticles for simultaneous detection of multi-targets. In this paper, a red emission fluorescent carbon nanoparticles were prepared by 1, 2, 4-triaminobenzene dihydrochloride at room temperature. The as-prepared red emission fluorescent carbon nanoparticles exhibited strong emission peak located at 635 nm with an absolute quantum yield up to 24%. They showed excellent solubility, high photostability and good biocompatibility. Furthermore, it could sensitively and selectively response to hypochlorite and pH, thus simultaneous detection of hypochlorite and pH was achieved by combining the red emission fluorescent carbon nanoparticles with computational chemistry. The formation mechanisms of red emission fluorescent carbon nanoparticles and their response to hypochlorite and pH were investigated, respectively.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Science China-Technological Sciences
·
2023
·
IF 4.6
Ren Hui,Zhang Zhen,Lu KaiLun,Shen YuanYuan,He ChaoLiang,Chen XueSi
Burn wounds are destructive skin traumas typically of irregular shape and large area. Prone to infection, they require frequent dressing replacement, and painless removal of dressings from burn wounds remains a major challenge. This study focuses on the dynamic characteristics and treatment difficulty of burn wounds. Hydrogel dressings based on glycol chitosan and propionaldehyde- or benzaldehyde-terminated 4-arm poly(ethylene glycol) were designed on the basis of Schiff base cross-linking networks. The hydrogels exhibited shape-adaptability, self-healing and fast-degradation properties, which makes these hydrogels suitable for burn wounds. Salvianolic acid B (SaB)-loaded hydrogel exhibited good antioxidant properties in vitro . In a rat model of deep second-degree burn wounds, the SaB-loaded hydrogel could quickly reduce wound temperature, regulate wound oxidant microenvironment, promote angiogenesis, and accelerate wound healing. Thus, the drug-loaded hydrogel shows significant potential as a first-aid dressing for treatment of burn wounds.
✓ 已验证
产品关联
DOI
高影响因子
Nature Protocols
·
2023
·
IF 14.8
Liu Yongchun,Miao Shuting,Ren Hao,Tian Lihua,Zhao Jian,Yang Peng
Two-dimensional (2D) protein films can be used to modify the properties of surfaces, and find applications predominantly in the fields of biomaterials, lithography, optics and electronics. However, it is difficult to produce scalable homogeneous and robust protein films with an easy, low-cost, green and efficient method. Further challenges include encapsulating and releasing functional building blocks in the film without inactivating them, and maintaining or improving the bioactivities of proteins used for the formation of the films. Here we detail the process to prepare large 2D protein films with user-defined features and structures via the amyloid-like aggregation of commonly synthesized proteins. These films can be synthesized at meter scales, have high interface adhesion, high functional expansibility and tunable functional properties, obtained by controlling the position of the disulfide bond breakage. For example, we can retain or even enhance the natural antibacterial, biomineralization and antifouling activity of proteins involved in film formation, and the properties can also be expanded through the physical blending or chemical grafting of additional functional blocks on the surface of the film. A 2D protein film can be prepared in ~3 h using four alternative coating techniques: immersion, transfer, hydrogel stamping and spraying. The characterization process of the film requires ~5 d. The procedure can be carried out by users with basic expertise in materials science.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Drug Delivery and Translational Research
·
2023
·
IF 5.4
Tao Wanjun,Xie Pei,Huang Chengyuan,Wang Ying,Huang Yu,Yin Zongning
In an effort to overcome the nasal mucus barrier and epithelial barrier, as well as reduce entry into the bloodstream, we designed RWrNM and DLPC-modified PLGA nanoparticles (PDR-NPs). These nanoparticles were further encapsulated with dexamethasone acetate (Dexac) to form Dexac/PDR-NPs. Transmission electron microscopy (TEM) analysis revealed their spherical shape with an outer lipid layer. Dynamic light scattering (DLS) determined their particle size to be 125.77 ± 2.01 nm, with a polydispersity index (PDI) of 0.139 ± 0.029. The experimental results demonstrate that DLPC-modified PLGA nanoparticles can effectively reduce interactions with mucin at different concentrations, decrease aggregation, and facilitate their crossing of the mucus barrier. Additionally, results from the cellular uptake assay revealed a significantly greater uptake of PDR-NPs by inflammatory RAW 264.7 cells (2.99-fold higher than that of free C6, p < 0.0001) and inflammatory HUVECs (7.20-fold higher than that of free C6, p < 0.0001). Furthermore, Dexac/PDR-NPs effectively reduced the levels of inflammatory factors nitric oxide (NO) ( p < 0.001) and interleukin-6 (IL-6) ( p < 0.05) in the supernatant of inflammatory RAW 264.7 cells. Intravital imaging of rats revealed that PDR-NPs had a longer residence time in inflamed nasal tissue compared to PD-NPs. Furthermore, in vivo pharmacodynamic experiments showed that Dexac/PDR-NPs effectively reduced the symptoms of nasal inflammation, lowered the pH of nasal secretions, decreased serum inflammatory factor levels (TNF-α and IL-6), and reduced nasal mucosal inflammatory factor levels (IL-1β), while also reducing the degree of inflammation in the nasal mucosa. Both cytotoxicity assays and in vivo results indicate that PDR-NPs have a good safety profile. PDR-NPs not only overcome the nasal mucus barrier but also reduce the systemic toxicities associated with drug entry into the circulation by enhancing the targeting of inflammatory macrophages and inflammatory vascular endothelial cells. PDR-NPs allow for an “open sources and cut costs” treatment strategy to increase drug retention in the inflamed nasal tissues, reducing toxicity and increasing efficacy. In conclusion, PDR-NPs can be a promising drug delivery system for the local treatment of acute rhinosinusitis. Graphical Abstract
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Nature Communications
·
2023
·Vol. 14
·期 1
·1-11
·
IF 16.6
Bai Ningning,Xue Yiheng,Chen Shuiqing,Shi Lin,Shi Junli,Zhang Yuan,Hou Xingyu,Cheng Yu,Huang Kaixi,Wang Weidong,Zhang Jin,Liu Yuan,Guo Chuan Fei
Humans can gently slide a finger on the surface of an object and identify it by capturing both static pressure and high-frequency vibrations. Although modern robots integrated with flexible sensors can precisely detect pressure, shear force, and strain, they still perform insufficiently or require multi-sensors to respond to both static and high-frequency physical stimuli during the interaction. Here, we report a real-time artificial sensory system for high-accuracy texture recognition based on a single iontronic slip-sensor, and propose a criterion—spatiotemporal resolution, to corelate the sensing performance with recognition capability. The sensor can respond to both static and dynamic stimuli (0-400 Hz) with a high spatial resolution of 15 μm in spacing and 6 μm in height, together with a high-frequency resolution of 0.02 Hz at 400 Hz, enabling high-precision discrimination of fine surface features. The sensory system integrated on a prosthetic fingertip can identify 20 different commercial textiles with a 100.0% accuracy at a fixed sliding rate and a 98.9% accuracy at random sliding rates. The sensory system is expected to help achieve subtle tactile sensation for robotics and prosthetics, and further be applied to haptic-based virtual reality and beyond.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF MATERIALS SCIENCE
·
2023
·Vol. 58
·期 41
·16019-16032
·
IF 4.5
Cao Junhui,Wang Guanglong,Hou Shusen,Yu Weixin,Yang Zhijun,Wu Yihui
Although Urea oxidation reaction (UOR) with favorable thermodynamic potential has been well-acknowledged as a feasible alternative to slow oxygen evolution reaction for hydrogen production through water splitting, but the shortage of low-cost and high efficiency electrocatalysts restricts its practical development. In this research, a free-standing nickel–iron-phosphide (NiFeP) nanosheets electrocatalysts on nickel foam is synthesized by electrodeposition method. The presence of phosphide (P) causes nickel–iron (NiFe) to evolve from crystalline to amorphous structures. The NiFeP electrocatalysts with nanosheets structure exhibit reliable electrocatalytic activities toward UOR with small potential of 1.397 V at 10 mA cm −2 , low Tafel slope of 60.1 mV dec −1 and outstanding catalytic stability in 1.0 M KOH with 0.33 M urea solution. More impressively, the electrochemical activation energy (E a ) of UOR for the NiFeP electrocatalyst (35.6 kJ mol −1 ) is much lower than that of NiFe electrocatalyst (52.1 kJ mol −1 ). The phosphorus doping triggers the electronic structure of Ni and Fe site reconstruction, which is conducive to accelerating charge and mass transport, and then contributes to the enhanced electrocatalytic performance. Furthermore, the formation of amorphous structure and nanosheets structure by the incorporation of phosphorus contributes to the improved intrinsic activity of NiFeP for UOR.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF POLYMER RESEARCH
·
2023
·Vol. 30
·期 11
·1-15
·
IF 2.8
Yin Nian,Chen Yuhan,Wang Yunfei,Gao Shanjun,Shen Chunhui
In this paper, a single-component intumescent flame retardant di-(3-aminopropyltriethoxysilane) spirocyclic pentaerythritol diphosphate (PDAP) was synthesized, imparting flame retardancy to polylactic acid (PLA), which using melt blending process. The chemical structure and thermal stability of PDAP were characterized by test methods such as Fourier transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA). The fire retardancy of PLA/PDAP was evaluated by test methods such as limiting oxygen index (LOI) and vertical burning test (UL-94). The thermal stability of PLA/PDAP was studied by TGA and thermogravimetry-Fourier transform infrared spectrometry (TG-FTIR). According to the results of laser Raman spectroscopy (LRS) and FTIR, the possible flame retardant mechanism of PLA/PDAP was discussed. With only 20 wt% addition of PDAP, PLA/PDAP could achieve 11.98% char residues at 800 °C. The LOI value of PLA/PDAP achieved 37%, UL-94 test reached V-0 rating. And higher fireproof performance with 62.1% reduced peak heat release rate (PHRR), 36.8% reduced total heat release rate (THR) and 19.5% reduced average effective combustion heat (av-EHC) value than PLA. The results show that PDAP has remarkable flame retardant effect on PLA, which provides an excellent research case for flame retardant modification of PLA plastic products.
✓ 已验证
产品关联
DOI
高影响因子