文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第3241至3252个,产品总数4,428个

切换升序
Ni
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING · 2026 ·Vol. 132 ·期 9 ·968 · IF 3

Hierarchically Engineered NiSnSe₂@r-GO@Ni-MOF Composite as a Bifunctional Electrode for High-Performance Supercapacitors and Hydrogen Evolution Reaction

Shahbaz Muhammad Ali Hamza,Nasir Hamid,Afzal Amir Muhammad,Imran Muhammad,Chine Zied,Mumtaz Sohail,Kumar Abhinav,Kamran Muhammad Arshad

Developing multifunctional electrode materials that integrate high energy storage capacity with catalytic activity is essential for next-generation energy systems. Herein, a hierarchically engineered NiSnSe₂@r-GO@Ni-MOF composite was synthesized by the use of a two-step hydrothermal process, combining the high conductivity of r-GO, the porous framework of Ni-MOF, and the redox activity of NiSnSe₂. Structural and morphological investigations (SEM, XRD, Raman, XPS, and BET–BJH) confirmed the formation of a well-integrated mesoporous architecture with a large available electroactive sites and effective electron–ion transport. Electrochemical evaluation exhibited a high specific capacity of 1297.8 C g⁻¹. The assembled asymmetric device (NiSnSe₂@r-GO@Ni-MOF//AC) achieved an energy density of 44.8 Wh kg⁻¹ and a power density of 1120 W kg⁻¹, with 90% capacity retention over 7,000 cycles. Additionally, the composite exhibited excellent HER response and delivered a low overpotential of 49 mV and a Tafel slope of 52 mV dec⁻¹. The boosted bifunctional enactment is accredited to strong interfacial coupling and stabilizes the electrode structure, which highlights a scalable strategy for designing efficient multifunctional heterostructure to overcome the energy crisis in the present era.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
ACS Applied Nano Materials · 2026 · IF 5.8

Engineering an Electron-Rich Microenvironment in Ni–NiWO4 Heterostructures as High-Performance Electrocatalysts for H2 Production at High Current Density

Cui Zhiqing,Wu Hao,Li Mingyue,Lv Liwei,Chen Huamao,Huang Jiawang,Li Taotao,Hu Jinwu,Fang Caihong

Exploration of efficient and nonprecious electrocatalysts is essential to propel water electrolysis toward developing a sustainable world. Herein, we demonstrated heterogeneous Ni–NiWO 4 nanostructures grown in situ on nickel foam (NF) (Ni–NiWO 4 /NF), serving as effective bifunctional electrocatalysts toward the hydrogen evolution reaction (HER) and urea oxidation reaction (UOR), enabling high-performance overall urea splitting reaction (OUS) in both freshwater and seawater. The favorable porous architecture provides a large electrochemically active surface area and facilitates mass transfer. The coupling between Ni nanoparticles and the NiWO 4 matrix creates an electron-rich microenvironment and modulates the electronic states of the active sites, which provides optimal chemical affinities for various reaction intermediates, as confirmed by our calculation through density functional theory calculations. Specifically, the Ni–NiWO 4 /NF electrocatalyst exhibits low overpotentials of 26 mV@10 mA cm –2 , 126 mV@100 mA cm –2 , and 156 mV@200 mA cm –2 in alkaline freshwater and 31 mV@10 mA cm –2 , 162 mV@100 mA cm –2 , and 212 mV@200 mA cm –2 in alkaline seawater for the HER. Remarkably, the overpotential is as low as 265 mV, even when the current density was evaluated to be as high as 1.0 A cm –2 . For the UOR, it demonstrates low potentials of 1.292 V@10 mA cm –2 , 1.343 V@100 mA cm –2 , and 1.374 V@200 mA cm –2 in alkaline freshwater and 1.307 V@10 mA cm –2 , 1.358 V@100 mA cm –2 , and 1.387 V@200 mA cm –2 in alkaline seawater. Notably, the recorded voltage for the OUS reaction decreases to 1.366 V in freshwater and 1.390 V in seawater. Additionally, the catalyst demonstrates excellent long-term stability in seawater for 100 h at 10 mA cm –2 . Furthermore, we successfully demonstrated solar-powered green hydrogen production at a rate exceeding 510 L h –1 m –2 , showcasing its strong potential for the practical application of direct solar-to-hydrogen conversion.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Catalysts · 2026 ·Vol. 16 ·期 9 ·761 · IF 4.5

Fe-Ni Bimetallic Modified HZSM-5 for Efficient Preparation of Monocyclic Aromatic Hydrocarbons via Co-Pyrolysis of PET and LDPE

Haijian Yang,Changsen Zhang,Lianfeng Shang,Hanfang Feng,Na Xiao

Plastic waste has become a serious global issue. Thermal treatment of waste PET faces critical drawbacks including severe reactor clogging and low-value oxygen-rich bio-oil, restricting large-scale chemical recycling. Co-pyrolysis with hydrogen-rich low-density polyethylene (LDPE) over modified zeolite provides a viable route to overcome these barriers. In this study, reaction parameters including temperature, plastic/catalyst ratio and PET/LDPE ratio were optimized, and Fe-Ni bimetallic modified HZSM-5 was fabricated via impregnation to boost monocyclic aromatic hydrocarbons (MAHs) production. LDPE served as a hydrogen donor to facilitate PET deoxygenation via synergistic effects. At 550 °C with a plastic/catalyst ratio of 1:4 and PET/LDPE ratio of 2:3, the liquid yield hit 80.2%, and all detectable organic compounds in the liquid phase identified by GC–MS were aromatic hydrocarbons. Among all prepared mono- and bimetallic zeolites, 3Fe7Ni/HZ delivered optimal MAHs selectivity at 80.5%. This 20% promotion over unmodified HZSM-5 stems from balanced metal dispersion and tuned acid sites unique to Fe–Ni co-loading. This work offers a feasible strategy for converting waste plastics into high-value aromatics and further trials with varied metal contents will be needed to extend industrial applicability.

CAS / MDL: 13478-00-7 7782-61-8
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING · 2023 · IF 6.4

Preparation and properties of multiphase solid-solution strengthened high-performance W–Cu alloys through alloying with Mo, Fe and Ni

He Zhang,Xiao-Chun Deng,Guo-Hua Zhang

In this study, high performance W–Mo–Cu–Ni–Fe alloy samples with additions of Mo (0–6 wt%), Ni and Fe (total content: 2.5 wt% and 5 wt%) were obtained through liquid-phase sintering at lower temperature, with the raw material of ultrafine W–Mo–Cu–Ni–Fe composite powder. Ultrafine W–Mo–Cu–Ni–Fe alloy powder with strong sintering activity and uniform composition was obtained by two-stage reduction means composed of carbothermic pre-reduction and hydrogen deep deoxidation steps. Significantly, the bonding ability of W/Cu phase interface and the wettability of two phases are greatly improved due to the presences of Ni and Fe. Moreover, the addition of appropriate Mo content was advantageous to the formation of W–Mo solid solution . All alloy samples achieved higher densification degrees to guarantee that the sintered blocks possess outstanding overall performances. Especially, by adjusting Ni/Fe ratio, the highest tension strength and elongation of were achieved by W-2wt.%Mo-1.75 wt%Ni-0.75 wt%Fe-27.5 wt%Cu sintered block, which were 567 MPa and 10.37%, respectively. Moreover, owing to the presences of W–Mo and Cu–Ni–Fe solid solutions, this alloy also had the highest microhardness and bending strength of 446 HV and 1473 MPa, respectively. As increasing Mo content from 0 wt% to 6 wt%, the compression strength of sintered blocks was improved, and failure strains of all the sintered blocks are close to 100%, respectively. However, even though the Cu matrix network structure is more evenly distributed as a result of the existences of added Ni and Fe, the electronic movement ability of the sintered blocks was reduced, leading to a significant decrease in conductivity.

CAS / MDL: 1317-38-0 1313-99-1
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
APPLIED CATALYSIS A-GENERAL · 2023 · IF 5.5

High-performance depolymerization of lignin by bimetallic Cu-Ni@C catalysts prepared with MOF as a carrier under mild conditions

Wenqi Zou,Heyu Li,Minghua Liu,Yuancai Lv

In this study, Cu was loaded on the surface of Ni-MOF by impregnation, and significantly improved the catalytic activity on lignin and its derivatives. The characterization showed that the non-noble bimetallic catalyst owned good dispersion, rich acid sites and stable structure was successfully synthesized. The introduced Cu reduced the reduction temperature of Ni, increased the acidity of the catalyst, and thus improved the catalytic performance and product selectivity of the catalyst. Under the mild conditions (120 °C), the conversion percentage of BPE was as high as 89.6 % using isopropyl alcohol as the hydrogen source. When the reaction temperature was 260 °C, the depolymerization percentage of corn cob lignin was 81.12 %, and the yield of phenol monomer could reach 11.46 wt. %. This work may provide an effective strategy for the preparation of efficient bimetallic catalysts for lignin hydrogenolysis .

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
FUEL · 2023 · IF 7.4

Selective hydrogenation of oleic acid over Flower-like Ni-Fe/SiO2-ZrO2 catalyst to produce fatty alcohol: Effect of SiO2

Fei Wang,Songyin Yu,Hui Xu,Junfeng Feng,Feihong Guo,Xiaoxiang Jiang,Jianchun Jiang

To solve the problem of harsh reaction conditions in lipid hydrogenation into fatty alcohol over Cu based bimetallic catalysts, the cheap Ni-base catalyst with high activity was synthesized. By using the hydrothermal method, the flower-like SiO 2 -ZrO 2 support was prepared. The Ni-Fe/SiO 2 -ZrO 2 catalyst was further prepared by the impregnation method and utilized in the fatty acid hydrogenation to produce fatty alcohol. Under the reaction conditions (240 °C, initial H 2 pressure: 2 MPa and reaction time: 3 h), the Ni-Fe/0.13SiO 2 -ZrO 2 catalyst attained 96.0% conversion and 86.4% fatty alcohol yield, much higher than that of Ni-Fe/ZrO 2 without SiO 2 (conversion 86.1% and fatty alcohol yield 61.9%). The high catalytic activity of Ni-Fe/0.13SiO 2 -ZrO 2 was ascribed to the increase of surface area, reduction of NiO grain size, and formation of flower-like morphology. The high selectivity to fatty alcohol over Ni-Fe/0.13SiO 2 -ZrO 2 was related to the increase of Lewis acidity (extra active sites) and the decrease of oxygen vacancy which weakened the adsorption of aldehyde (enol) on the catalyst and thus facilitated the formation of fatty alcohol.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Journal of Energy Chemistry · 2023 · IF 13.1

Multiscale strain alleviation of Ni-rich cathode guided by in situ environmental transmission electron microscopy during the solid-state synthesis

Fengyu Zhang,Yunna Guo,Chenxi Li,Tiening Tan,Xuedong Zhang,Jun Zhao,Ping Qiu,Hongbing Zhang,Zhaoyu Rong,Dingding Zhu,Lei Deng,Zhangran Ye,Zhixuan Yu,Peng Jia,Xiang Liu,Jianyu Huang,Liqiang Zhang

Ni-rich layered oxides are one of the most promising cathode materials for Li-ion batteries due to their high energy density. However, the chemomechanical breakdown and capacity degradation associated with the anisotropic lattice evolution during lithiation/delithiation hinders its practical application. Herein, by utilizing the in situ environmental transmission electron microscopy (ETEM), we provide a real time nanoscale characterization of high temperature solid-state synthesis of LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NCM811) cathode, and unprecedentedly reveal the strain/stress formation and morphological evolution mechanism of primary/secondary particles, as well as their influence on electrochemical performance. We show that stress inhomogeneity during solid-state synthesis will lead to both primary/secondary particle pulverization and new grain boundary initiation, which are detrimental to cathode cycling stability and rate performance. Aiming to alleviate this multiscale strain during solid-state synthesis, we introduced a calcination scheme that effectively relieves the stress during the synthesis, thus mitigating the primary/secondary particle crack and the detrimental grain boundaries formation, which in turn improves the cathode structural integrity and Li-ion transport kinetics for long-life and high-rate electrochemical performance. This work remarkably advances the fundamental understanding on mechanochemical properties of transition metal oxide cathode with solid-state synthesis and provides a unified guide for optimization the Ni-rich oxide cathode.

CAS / MDL: 1310-66-3
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ACS Sustainable Chemistry & Engineering · 2022 · IF 9.224

Catalytic Transfer Hydrogenation and Ethanolysis of Furfural to Ethyl Levulinate Using Sulfonated Hf- or Ni-Catalysts Prepared with Mixed Solvents

Hengyu Hao,Yuya Abe,Haixin Guo,Xiao Zhang,Richard Lee Smith Jr

Bifunctional Lewis (L) acid (Ni- or Hf-) site–Brønsted (B) acid catalysts designed to promote transfer hydrogenation reactions were prepared via hydrothermal and solvothermal methods using safe mixed solvents and sustainable precursors. By using N,N-dimethylformamide as a basis for the desired basicity, mixed solvents could be identified that allowed catalysts to be prepared with tunable ratios of Lewis to Brønsted acid sites (L/B). The as-prepared catalysts promoted transfer hydrogenation of furfural and ethanolysis to form ethyl levulinate (EL) using ethanol as a solvent and hydrogen donor source. Among the catalysts, sulfonated Hf-catalysts prepared with a cyclopentanone/formic acid mixed solvent (Hf-CPN/FA) with an L/B ratio of 6.4 gave 95% furfural conversion with 51.9% yield of EL, while the sulfonated Hf catalyst prepared with a cyclopentanone/γ-valerolactone mixed solvent (Hf-CPN/GVL) with a total Lewis and Brønsted acid site amount of 85.1 μmol/g gave 100% furfuryl alcohol (FAL) conversion with 72.5% yield of EL. Brønsted acid sites promoted reversible acetalization of furfural with ethanol into 2-furaldehyde diethyl acetal, while Lewis acid sites promoted furfural transfer hydrogenation into FAL and EL and further conversion into γ-valerolactone. The methods developed in this work eliminate dipolar aprotic solvents and harsh acids used in catalyst synthesis and allow sustainable production of EL from biomass-related chemicals.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
MOLECULES · 2022 ·Vol. 28 ·期 1 ·233 · IF 4.927

In Situ Synthesis of C-N@NiFe2O4@MXene/Ni Nanocomposites for Efficient Electromagnetic Wave Absorption at an Ultralow Thickness Level

Qing Sun,Xin Yang,Tie Shu,Xianfeng Yang,Min Qiao,Dashuang Wang,Zhaohui Liu,Xinghua Li,Jinsong Rao,Yuxin Zhang,Pingan Yang,Kexin Yao

Recently, the development of composite materials composed of magnetic materials and MXene has attracted significant attention. However, the thickness and microwave absorption performance of the composite is still barely satisfactory. In this work, the C-N@NiFe2O4@MXene/Ni nanocomposites were successfully synthesized in situ by hydrothermal and calcination methods. Benefiting from the introduction of the carbon-nitrogen(C-N) network structure, the overall dielectric properties are improved effectively, consequently reducing the thickness of the composite while maintaining excellent absorption performance. As a result, the minimum reflection loss of C-N@NiFe2O4@MXene/Ni can reach −50.51 dB at 17.3 GHz at an ultralow thickness of 1.5 mm, with an effective absorption bandwidth of 4.95 GHz (13.02–18 GHz). This research provides a novel strategy for materials to maintain good absorption performance at an ultralow thickness level.Keywords:electromagnetic wave absorption;MXene;NiFe2O4

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
DALTON TRANSACTIONS · 2022 ·Vol. 52 ·期 6 ·1680-1686 · IF 4.569

In situ growth of Prussian blue analogue-derived Fe-doped NiS on Ni(OH)2 for efficient hydrogen evolution reaction

Xinyao Ding,Mingyi Zhang,Xin Chang,Xuejiao Zhou

The energy industry is placing more and more emphasis on the need for effective and affordable electrocatalysts for hydrogen evolution reactions (HER). In this work, an iron-doped NiS/Ni(OH)2/CC composite material was synthesized by simple hydrothermal sulfurization processes of bimetallic Prussian blue analogue (PBAs) precursors grown in situ on three-dimensional (3D) Ni(OH)2 nanosheets. The overpotential can be 103 mV to attain current densities of 10 mA cm−2. The excellent catalytic activity of Fe-NiS/Ni(OH)2/CC is because of the unique 3D structure and the uniform doping of iron caused by the in situ growth of PBA, as well as the high conductivity of the self-supported electrode carbon cloth.

CAS / MDL: 13746-66-2 1313-84-4
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2022 · IF 16.744

Flexible one-dimensional yarn-like Ni-Zn battery: micron-nano hierarchical-structure array, high energy density and excellent capacity retention

Zhaopeng Xia,Jiajun Pan,Hao Chen,Nanping Deng,Chao Yang,Xiaochen Liu,Yong Liu,Liwei Wu

Many researches are devoted to design the wearable fibrous energy storage devices with miniaturization in order to satisfy the large demand of power for portable wearable electronics. As a kind of flexible battery, one-dimensional yarn-like nickel-zinc (Ni-Zn) battery has a lot of disadvantages such as low energy density and poor power density. Significantly, metal–organic framework (MOF) material provides an opportunity to solve the preceding shortcomings due to its porous structure, excellent specific surface area and multi-functionalization. In this study, the nickel cobalt layered double hydroxides (NiCo LDHs) with triangular micro sheet array and nano sheet structure is designed and prepared on silver coated nylon fibers (SCNF) as the flexibly fibrous Ni-Zn battery cathodes (SCNF@Ni@MOF@NiCo LDHs yarn electrode), which have high specific surface area and super structure stability even during bending of the yarn. Therefore, the cathodes have abundant active sites, excellent electron conduction and fast ion diffusion. The assembled aqueous Ni-Zn battery is featured with suitable capacitance (342 mAh/g at 7.6 A/g), appropriate energy density (572.5 Wh/g at 2.59 W g −1 ) and superior stability (55 % after 5000 cycles). In addition, the obtained one-dimensional yarn-like Ni-Zn battery has excellent flexibility and high capacity retention (90 % after 1000 bends and over 80 % after different deformation ways such as bend, squeeze and twist). These fascinating results demonstrate that the SCNF@Ni@MOF@NiCo LDHs yarn electrode have great application potential in wearable energy storage devices.

CAS / MDL: 693-98-1 13478-00-7
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF COLLOID AND INTERFACE SCIENCE · 2023 · IF 9.9

Multistage interfacial engineering of 3D carbonaceous Ni2P nanospheres/nanoflowers derived from Ni-BTC metal–organic frameworks for overall water splitting

Neng Chen,Sai Che,Hongchen Liu,Guohua Li,Na Ta,Feng Jiang Chen,Bo Jiang,Ni Wu,Zhengxuan Li,Weiqi Yu,Fan Yang,Yongfeng Li

The regulation of the multi-dimensional interface plays an important role in optimizing the electron transport and gas mass transfer during catalysis, which is conducive to promoting the electrocatalytic process. Herein, a self-supporting electrode has been developed with the multistage interface within 3D Ni 2 P@C nanospheres/nanoflowers arrays derived from metal-organic frameworks (MOFs) as template skeletons and precursors. The constructed nanosphere interface protrudes outward to optimize the contact with the electrolyte while the nanoflower lamellar connection promotes rapid electron transfer and exposes more active sites, and accelerates the gas diffusion with the abundant interspace channels. According to theoretical calculation, the synergistic effect between Ni 2 P and C is conducive to the optimal adsorption and desorption of H*, thus contributing to the improvement of catalytic kinetics. With the optimized growth times assembled onto nickel foam substrates, the Ni 2 P@C-12 h requires overpotentials of only 69 mV and 205 mV to drive the current density of 10 mA cm −2 towards hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), respectively. And it reveals an ultralow cell voltage of 1.55 V at 10 mA cm −2 to achieve overall water splitting (OWS). In addition, the stability of the Ni 2 P@C/NF electrocatalyst emerges as prominent long-term stability, which is attributed to the carbonaceous nanosphere anchors on the substrate to minimize the possibility of oxidation of the catalyst surface. This strategy of in situ growth of MOF-derived phosphates provides a general idea for interfacial engineering modification of OWS electrode materials.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。