FOOD HYDROCOLLOIDS
·
2025
·
IF 12.4
Chen Chen,Suyun Deng,Huaixiang Tian,Haiyan Yu,Juan Huang,Xinman Lou,Haibin Yuan
Fresh walnuts are prone to browning and microbial spoilage post-harvest due to their high water content and enzyme activity. Although chitosan-based preservation materials shows great potential for the preservation of fruits and vegetables, their effectiveness is hindered by limited antibacterial, antioxidant, and mechanical properties. In this study, a novel biomass composite film was developed by integrating bacterial cellulose (BC) stabilized cinnamon essential oil Pickering emulsion (CEO-BC-PEs) into chitosan (CS) through hydrogen bonding. The physicochemical characteristics, biodegradability, antioxidant capacity, and antibacterial properties of the CS-BC-CEO composite film were evaluated, and its preservation effect on fresh walnuts was assessed. Results indicated that hydrogen bonding between the CEO-BC-PEs and the CS matrix significantly improved the composite film's thermal stability, mechanical strength, and barrier properties. Specifically, the incorporation of CEO-BC-PEs enhanced the tensile strength (TS) and elongation at break (EAB) by 51.24% and 28.79%, respectively, while reducing water vapor permeability (168.19 mg mm·kPa −1 ·h −1 ·m −2 ) and ultraviolet light transmittance (<75%). Additionally, the film demonstrated excellent antioxidant activity (up to 60%), antibacterial efficacy (up to 65%), and biodegradability. When used for preserving fresh walnuts, the composite film effectively reduced nutrient loss, delayed lipid oxidation, and suppressed the activity of browning-related enzymes, thereby significantly extending the shelf life of the walnuts. These findings highlight the potential of the CS-BC-CEO composite film as a promising solution for fresh walnuts preservation and suggest its applicability in developing sustainable active biomass packaging materials.
✓ 已验证
产品关联
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2024
·
IF 8.1
Wan Zhou,Minjun Zhang,Xinjie Liu,Wajid Hussain,Baoan Zhu,Huibin Yu,Shenqi Wang,Lei Zhou
Hemoperfusion is one of the most effective treatments for the removal of bilirubin from the blood. Chitosan (CS) has been widely investigated as a hemoperfusion adsorbent to remove bilirubin due to its biocompatibility and biodegradability. However, the limited adsorption capacity of CS for free bilirubin or albumin-rich bilirubin solution, and the strong adsorption for albumin, limit its extensive use. The goal of this work is to improve specific bilirubin adsorption of CS while reducing its adsorption for albumin. In this study, collagen (Col) was chosen as a ligand and grafted onto the surface of CS microspheres to form CS-Col microspheres and therefore to improve their adsorption performance for bilirubin. The maximum adsorption capacity of the CS-Col microspheres for bilirubin increases from 24.2 to 76.9 mg/g. The enhancement factor is higher than that of other CS-based adsorbents. Moreover, the adsorption of CS-Col microspheres for albumin is effectively reduced to 2.6 %, while maintaining good blood compatibility. Compared to other CS-based bilirubin adsorbents, our CS-Col microspheres have the advantage of specific adsorbing bilirubin against albumin due to introducing collagen. This work provides new directions for designing high-performance bilirubin adsorbents. Our CS-Col microspheres show great promise for the treatment of hyperbilirubinemia.
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2025
·
IF 8.5
Yibing Yan,Fangxiang Song,Songye Li,Tingxian Li,Qian Li,Yan Li
Accurate pesticide application enhances efficiency, reduces usage and minimizes environmental risks. This study employed amino-functionalized degradable mesoporous organosilicon nanoparticles (DMON-N) as a carrier, with chitosan (CS) acting as a capping agent. Chemical cross-linking of CS with Cu 2+ through chelation promotes the formation of Cu 2+ -CS complexes. A pH/redox dual-responsive prochloraz (PRO) delivery system (Cu-CS@PRO-DMON, CCPD) was constructed and evaluated for its potential application in controlling rice sheath blight. The successful preparation of CCPD was confirmed through a series of physicochemical characterizations. The findings demonstrated that CCPD exhibited a high PRO loading capacity (29.09 %) and that PRO could be released from CCPD for an extended duration (up to 144 h) under the influence of acidity and glutathione promotion. Furthermore, CCPD demonstrated excellent wettability (measured contact angle: 63.52 ± 0.42°), adhesion (23.83 ± 2.59 mg/cm 2 ) and resistance to rainfall washout on rice leaves. CCPD demonstrated superior antimicrobial efficacy to prochloraz technical (PRO TC) material and prochloraz emulsion in water (PRO EW). The biosafety assessment revealed that CCPD exhibited minimal acute toxicity to zebrafish, no discernible toxicological effects on human bronchial epithelial cells and no notable impact on rice.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Advanced Sustainable Systems
·
2025
·
IF 6.1
Jianle Zhou,Xiongliang He,Yanyan Ye,Zhuoxin Zhuang,Xingyu Tang,Junpeng Zhao,Yunjian Ma,Yonghua Wang
Fatty acid photodecarboxylase (FAP) plays a crucial role in the green production of biofuel and other valuable biochemicals. However, the reusability of immobilized FAP has been limited due to inadequate durability. Here, a porous, translucent chitosan hydrogel sphere carrier functionalized with cyclic carbonate group to enhance the reusability of immobilized FAP is presented. Based on the arrangement of basic amino acid residues on the surface of FAP, bis(cyclic carbonate) containing a flexible chain from CO 2 is designed and synthesized. This compound is used to modify porous hydrogels obtained via a template-etching process. FAP is then covalently immobilized within the hydrogel framework through a reaction with the remaining cyclic carbonate groups, as evidenced by quartz crystal microbalance analysis. The modified porous hydrogel carrier, PH3-BC-II, significantly improves the activity of FAP, achieving a maximum conversion of 70.0%, with the enzyme loading of 125.3 mg g −1 (dry carrier). Furthermore, PH3-BC-II retains >50% of its initial activity after eight consecutive reaction cycles (total runtime of 24 h) at high fatty acid substrate concentrations. This study provides an effective strategy for constructing stable immobilized (photo)enzymes from sustainable materials.
✓ 已验证
产品关联
DOI
高影响因子
FOOD HYDROCOLLOIDS
·
2024
·
IF 11
Nan Gao,Xuanxuan Wang,Jingjing Tian,Yu Wang,Guixia Ling,Peng Zhang
In this work, copper nanoclusters (CuNCs) with tiny particle sizes were successfully obtained by a template-assisted synthesis approach. The interfacial interaction energies of cysteine (Cys) and CuNCs were simulated and calculated by molecular dynamics using the Materials Studio program package, and the anchoring sites of Cys on CuNCs surface in aqueous solution were investigated in detail by adsorption modeling. Chitosan (CS), a natural polymer , was used as a confining agent to enhance the excellent peroxidase (POD)-like activity of CuNCs. Therefore, the composite can catalyze the decomposition of hydrogen peroxide (H 2 O 2 ) to generate hydroxyl radical (·OH) and possess higher antibacterial activity . A broad-spectrum antibacterial system based on CS@CuNCs was established for E. coli and S. aureus , avoiding the harmful effects of high concentration of H 2 O 2 on organisms. In addition, a cascade reaction with glucose oxidase (GOx) was established for the specific consumption of glucose by bacteria, and a method for the visual colorimetric detection of bacterial viability within 30 min was established. Finally, based on the polymer properties of CS, a cling wrap with antibacterial properties was also prepared for food preservation. In summary, this study provides innovative proposals for the application of CS/nanocluster composite in food packaging, food safety, and even bioengineering .
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ELECTROANALYTICAL CHEMISTRY
·
2017
·
IF 3.012
Airong Mao,Hongbo Li,Liangyun Yu,Xiaoya Hu
An electrochemical sensor based on multi-walled carbon nanotubes and chitosan-nickel complex (MWCNTs/CTS-Ni) was fabricated by self-assembly technique for sensitive determination of metronidazole . The electroanalytical performance of the proposed MWCNTs/CTS-Ni modified electrode was intensively evaluated. The experimental results indicated that the MWCNTs/CTS-Ni modified glassy carbon electrode exhibited excellent electrocatalytic activity towards metronidazole. The proposed sensor revealed linear response to metronidazole in the concentration range of 0.1 to 150 μmol L − 1 , with a low detection limit of 0.025 μmol L − 1 . Moreover, the sensor also showed good selectivity, reproducibility and stability. The proposed method could be successfully applied for the sensitive determination of metronidazole in pharmaceutical and biological samples.
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2025
·
IF 8.5
Zhuangran Tuo,Yuanfeng Pan,Pingxiong Cai
Frequent oil spills have caused increasingly severe pollution of marine water bodies. As a result, exploring green and efficient aerogels to tackles oil pollution is in high demand. In this work, a unique strategy for preparing all-biomass aerogel was innovatively proposed. A series of all-biomass CW&BW@DCGA aerogels were successfully prepared by multiple dynamic covalent bonding, in which carboxymethyl chitosan (CMCS) as the substrate material, modified gelatin (Gel-ADH) as a reinforcing agent, and dialdehyde β-cyclodextrin (Da-β-CD) as a non-toxic cross-linking agent. The resulting aerogels were further hydrophobically modified with a green and natural wax blend consisting of carnauba wax (CW) and beeswax (BW). The experimental results demonstrated that incorporating Gel-ADH significantly improved the elastic properties of the materials. Specifically, when m(CMCS):m(Gel-ADH) = 7:3, the aerogel exhibited outstanding resilience, with 60 % compressive strain. In addition, CW&BW@DCGA displayed excellent hydrophobicity, boasting a water contact angle as high as 148.6°, and impressive absorption capacities ranging from 31.7 to 62.5 g/g towards different oils. Its adsorption capacity remained close to 70 % after 10 cycles, indicating favorable reusability. The dynamic absorption processes towards gasoline, diesel, and soybean oil were also well fitted with the pseudo-second-order kinetic model, suggesting that the process is primarily governed by chemisorption.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
REACTIVE & FUNCTIONAL POLYMERS
·
2024
·
IF 4.5
Kehao Fan,Quanling Zhao,Meiyi Zou,Zhiyong Qin,Xiaoyu Peng
In this paper, a new green method for preparing multifunctional chitosan-based aerogels was prepared by using natural plant polyphenols instead of traditional chemical crosslinking agents. The aerogel was crosslinked by a Schiff base reaction between chitosan and cellulose aldehyde, and then functionalized with gallic acid to enhance the structure and endow antibacterial properties. The aerogel displayed a three-dimensional, cross-linked porous structure and exhibited selective adsorption of anionic dyes. The theoretical maximum adsorption capacity of amaranth was 450.89 mg/g. The adsorption process is more consistent with the pseudo-second-order kinetic model and the Langmuir isotherm model, indicating that the adsorption process is monolayer chemical adsorption. The aerogel exhibited superior adsorption performance at a pH value of 4, with the adsorption mechanism predominantly being electrostatic adsorption. The maximum inhibition zones of the aerogels on E. coli and S. aureus were 19.8 mm and 16.8 mm, respectively, and the adsorption value of Cr (VI) was greater than 160 mg/g. The chitosan-based aerogel proposed in this paper may be a promising material for treating complex wastewater containing dyes and heavy metals.
✓ 已验证
产品关联
DOI
高影响因子
CARBOHYDRATE POLYMERS
·
2024
·
IF 10.7
Lihua Li,Li Ren,Qiuhan Zhao,Ke Xu,Qiushuang Wu,Qianru Su,Xin Li,Xin Lü,Li Wang
The management of wounds infected with drug-resistant bacteria represents a significant challenge to public health globally. Nanotechnology-functionalized photothermal hydrogel with good thermal stability, biocompatibility and tissue adhesion exhibits great potential in treating these infected wounds. Herein, a novel photothermal hydrogel (mCS-Cu-Ser 1 ) was prepared through in situ mineralization in the hydrogel networks and ion cross-linking driven by copper ions (∼3 mM). Self-assembling polyphosphate sericin nanoparticles (Ser NPs) formed by an ultrasound-assisted anti-solvent method were as mineralization templates and gallic acid-grafted chitosan (mCS) was prepared as the sole matrix. Grafting of polyphenols and cross-linking of copper ions endowed mCS-Cu-Ser 1 with injectable, skin-adhesive and self-healing characteristics. Due to the nonradiative relaxation of Cu 2+ electron-hole pairs of copper phosphate on the surface of Ser NPs and the molecular thermo-vibrational effect of the mCS-Cu complex, mCS-Cu-Ser 1 rapidly warmed up to 50 °C within one minute under near-infrared (NIR) irradiation. Integrating such excellent photothermal properties with antimicrobial activity and intracellular reactive oxygen species scavenging from mCS, mCS-Cu-Ser 1 + NIR effectively accelerated methicillin-resistant Staphylococcus aureus (MRSA) infected wound healing. This work develops a novel dressing for the treatment of MRSA-infected wounds and provides some reference for the preparation of multifunctional acid-free chitosan hydrogels.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Frontiers in Chemistry
·
2024
·
IF 3.8
Han Yanting,Cao Jing,Li Man,Ding Peng,Yang Yujie,Okoro Oseweuba Valentine,Sun Yanfang,Jiang Guohua,Shavandi Amin,Nie Lei
The healing of damaged skin is a complex and dynamic process, and the multi-functional hydrogel dressings could promote skin tissue healing. This study, therefore, explored the development of a composite multifunctional hydrogel (HDCP) by incorporating the dopamine modified hyaluronic acid (HA-DA) and phenylboronic acid modified chitosan (CS-PBA) crosslinked using boric acid ester bonds. The integration of HA-DA and CS-PBA could be confirmed using the Fourier transform infrared spectrometer and 1H nuclear magnetic resonance analyses. The fabricated HDCP hydrogels exhibited porous structure, elastic solid behavior, shear-thinning, and adhesion properties. Furthermore, the HDCP hydrogels exhibited antibacterial efficacy against Gram-negative Escherichia coli (E. coli) and Gram-positive Staphylococcus aureus (S. aureus). Subsequently, the cytocompatibility of the HDCP hydrogels was verified through CCK-8 assay and fluorescent image analysis following co-cultivation with NIH-3T3 cells. This research presents an innovative multifunctional hydrogel that holds promise as a wound dressing for various applications within the realm of wound healing.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
LWT-FOOD SCIENCE AND TECHNOLOGY
·
2024
·
IF 6
Yanjun Wei,Chaogeng Xiao,Wenjing Lu,Di Chen,Cen Zhang,Xiaogang Xu,Weimin Tang,Zhenlei Zhao
ABSTRACT Naringin (NR) is a prominent citrus bioflavonoid, but the application is greatly limited by its low bioavailability. To solve this problem, NR was encapsulated in carboxymethyl konjac glucomannan (CKGM) and chitosan (CS) to form core-shell nanoparticles (CS/CKGM-NR NPs). The physicochemical properties of CS/CKGM-NR NPs with ideal encapsulation efficiency of 82.70 ± 0.30% were characterized by fourier transform infrared spectroscopy and differential scanning calorimetry. The morphology and core-shell structure were investigated by scanning electron microscopy and confocal laser scanning microscopy . Moreover, the releasing behavior of NR was evaluated in In Vitro digestion mode, suggesting that core-shell CS/CKGM-NR NPs were successfully prepared (diameter 700 nm, +35 mV). The underlying mechanism indicated that carboxyl groups of CKGM were cross-linked with ammonium ion of CS by electrostatic interaction. Moreover, the releasing efficiency of NR in simulated gastric fluid (SGF, 20.62 ± 0.59%), simulated intestinal fluid (SIF, 17.08 ± 0.01%) and simulated colon fluid (SCF, 18.82 ± 0.61%) were greatly lowered compared with that of naked NR (52.70 ± 0.01% in SGF, 46.42 ± 3.30% in SIF, 69.35 ± 12.63% in SCF). The findings implied that CS/CKGM-NR NPs were created in core-shell form with controlled-releasing effect. This study provided new insight into the fabrication of CS/CKGM-NR NPs that could be developed as a potential nano-delivery with controlled-releasing effect.
✓ 已验证
产品关联
DOI
高影响因子
ENVIRONMENTAL RESEARCH
·
2024
·
IF 7.7
Jisuan Tan,Lingzhen Kong,Qiaoxian Huang,Yulin Gan,Shaorong Lu
In this investigation, synthesis of a surface-functionalized chitosan known as amino-rich chitosan (ARCH) was achieved by successful modification of chitosan by polyethyleneimine (PEI). The synthesized ARCH was characterized by a specific surface area of 8.35 m 2 g −1 and a microporous structure, with pore sizes predominantly under 25 nm. The Zeta potential of ARCH maintained a strong positive charge across a wide pH range of 3–11. These characteristics contribute to its high adsorption efficiency in aqueous solutions, demonstrated by its application in removing various anionic dyes, including erioglaucine disodium salt (EDS), methyl orange (MO), amaranth (ART), tartrazine (TTZ), and hexavalent chromium ions (Cr(VI)). The adsorption capacities ( Q e ) for these contaminants were measured at 1301.15 mg g −1 for EDS, 1025.45 mg g −1 for MO, 940.72 mg g −1 for ART, 732.96 mg g −1 for TTZ, and 350.15 mg g −1 for Cr(VI). A significant observation was the rapid attainment of adsorption equilibrium, occurring within 10 min for ARCH. The adsorption behavior was well-described by the Pseudo-second-order and Langmuir models. Thermodynamic studies indicated that the adsorption process is spontaneous and endothermic in nature. Additionally, an increase in temperature was found to enhance the adsorption capacity of ARCH. The material demonstrated robust stability and selective adsorption capabilities in varied conditions, including different organic compounds, pH environments, sodium salt presence, and in the face of interfering ions. After five cycles of adsorption, ARCH maintained about 60% of its initial adsorption capacity. Due to its efficient adsorption performance, simple synthesis process, low biological toxicity, and cost-effectiveness, ARCH is a promising candidate for future water treatment technologies.
✓ 已验证
产品关联
DOI
PubMed
高影响因子