FIBERS AND POLYMERS
·
2021
·Vol. 22
·期 3
·647-657
·
IF 2.153
Jiang Shuai,Farooq Amjad,Han Fuyi,Liu Lifang
Herein, carboxyl-rich cellulose nanocrystals (CNC) were obtained through a designed TEMPO (2,2,6,6-tetramethylpiperidine-1-oxyl) mediated oxidation process without any subsequent mechanical treatment, which was proved to be widely suitable for commonly used cellulosic sources, including fibril-like fibers and lignocellulose biomasses. CNC prepared from the acid-free process showed better dispersion stability, less aggregation, higher aqueous UV transmittance and crystallinity compared with that from sulfuric acid hydrolysis process. Furthermore, the residuals in the insoluble precipitate were further conducted ultrasonic treatment and extra CNC was obtained from the oxidized cotton and ramie cellulose while cellulose nanofibril (CNF) was extracted from rice straw and pine powder, attributing to their different native structures. The total yields of nanocelluloses (NCs) were up to 63.2–68.3 %, improving the utilization ratio of the raw materials. This work provided a widely applicable acid- and mechanic-free route in fabricating CNC with inherent carboxyl groups and described an understanding of the relationship between the native structure of raw materials and their products, which is beneficial for improving the application of NCs.
✓ 已验证
产品关联
DOI
高影响因子
Nature Communications
·
2020
·Vol. 11
·期 1
·1-8
·
IF 12.121
Du Xiaorui,Huang Yike,Pan Xiaoli,Han Bing,Su Yang,Jiang Qike,Li Mingrun,Tang Hailian,Li Gao,Qiao Botao
The strong metal-support interaction (SMSI) has long been studied in heterogonous catalysis on account of its importance in stabilizing active metals and tuning catalytic performance. As a dynamic process taking place at the metal-support interface, the SMSI is closely related to the metal surface properties which are usually affected by the size of metal nanoparticles (NPs). In this work we report the discovery of a size effect on classical SMSI in Au/TiO 2 catalyst where larger Au particles are more prone to be encapsulated than smaller ones. A thermodynamic equilibrium model was established to describe this phenomenon. According to this finding, the catalytic performance of Au/TiO 2 catalyst with uneven size distribution can be improved by selectively encapsulating the large Au NPs in a hydrogenation reaction. This work not only brings in-depth understanding of the SMSI phenomenon and its formation mechanism, but also provides an alternative approach to refine catalyst performance.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Coatings Technology and Research
·
2020
·Vol. 18
·期 2
·361-372
·
IF 1.815
Zhou Wenjin,Zhou Mingyang,Zhang Huapeng,Tang Hongyan
Inspired by fish scales, superhydrophilic and underwater superoleophobic alumina membranes were fabricated in this study. Dopamine deposited on the surface of alumina membranes through immersion over time, and then crosslinking reaction occurred with polyethyleneimine (PEI), which was confirmed by Fourier transform infrared spectroscopy and X-ray photoelectron spectroscopy. It induced the modified layer coated on the membrane surface. Values of water contact angle of the modified alumina membranes were ~ 0° in air. Values of underwater oil contact angle reached 155°, which indicated it was superhydrophilic and underwater superoleophobic. More particles engendered with the increase in the reaction time with PEI, which induced the decrease in the pore sizes and permeation flux. All values of oil rejection were higher than 98.5%. No obvious deterioration of permeation flux could be found. The rejection hardly suffered a sharp decline over 800 min. It indicates that the modified layer can firmly stick to the alumina membranes. Therefore, the as-prepared alumina membrane is promising for practical oil/water separation.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF POROUS MATERIALS
·
2020
·Vol. 27
·期 6
·1701-1710
·
IF 2.183
Zhao Shifeng,Fan Xin,Yang Junshan,Huang Hanhan,Xia Caifeng,Jing Ruisen,Wu Mi,Zhang Zhilei,Liu Aiju,Zhang Qian,Meng Zilin
The application of nanoscale zero-valent iron (NZVI) in a promising remediation strategy was challenged by easy aggregation and surface passivation. To enhance their performance of Cr(VI) removal, layered double hydroxides (LDHs) supported NZVI (NZVI@LDH) with different loading amount via an in-situ way was successfully synthesized. The structural characterization and morphology revealed LDHs could stabilize and uniformly disperse NZVI on the surface of LDHs layer, however, superabundant NZVI still leaded to a visibly aggregation. Cr(VI) removal by NZVI@LDH was higher than that of the sum of NZVI and LDHs, revealing a synergistic effect within this system. The results of Cr(VI) removal displayed with the growth of iron loading amount, the removal efficiencies were raised firstly but declined afterwards. Kinetics studies for all samples showed Cr(VI) removal well fitted pseudo-second-order model and isotherm data was well described by Langmuir model. The effects of initial concentration and pH on Cr(VI) removal were also examined. Cr(VI) in the wastewater was reduced by NZVI to Cr(III), NZVI was oxidized into Fe(II) and Fe(III). The excellent removal performance suggested a promising strategy in sewage water remediation.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2020
·Vol. 32
·期 21
·25656-25667
·
IF 2.22
Wang Huiya,Wu Xiaofen,Wang Qiuyue,Chen Siyi,Chen Gang,Dong Chengjun,Guan Hongtao
Efficient microwave absorbing materials have been drawn extensive attention. Herein, biomass porous carbon (BPC) from pine pollen has been obtained through KOH carbonization. In order to tune the microwave absorption, NiO has been composited with the as-prepared BPC with different contents. Despite the high specific surface area for the BPC activated at 600 °C, it exhibits poor microwave absorption properties as pure NiO. In contrast, the BPC/NiO composite with proper nickel precursor (0.1:1.0) has the maximum reflection loss ( RL ) of − 52.6 dB at 10.0 GHz and the effective absorption bandwidth ( RL < − 10 dB) reaches up to 4.9 GHz (from 7.8 to 12.7 GHz) when the absorber thickness is 3 mm. Three-dimensional porous architecture, interfacial polarization and their related relaxation from defects and interfaces cooperatively favor the impedance matching and strong EM wave attenuation capacities, which brings about multiple absorption mechanisms of the microwave. The present study not only provides a facile route to prepare porous carbon, but also sheds light on a new strategy in constructing BPC/NiO composites for excellent microwave absorption.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2020
·Vol. 31
·期 17
·14879-14885
·
IF 2.22
Niu Shuting,Jiang Juan,Wang Jinzhao,Gan Lin,Zhang Tianjin
0.67CaTiO 3 –0.33LaAlO 3 (CTLA) microwave dielectric ceramic materials with the additives of H 3 BO 3 , Li 2 CO 3 or H 3 BO 3 –Li 2 CO 3 were prepared by a conventional solid-state reaction method. The effects of the sintering additives on the densification behavior, phase compositions, microstructures, and microwave dielectric properties of the CTLA ceramic samples were investigated. It was found that the binary additive of H 3 BO 3 –Li 2 CO 3 effectively promoted the densification and lowered the sintering temperature of the CTLA ceramic samples without a significant decrease in their Q × f values. For example, with an addition of 0.2 wt% H 3 BO 3 –0.1 wt% Li 2 CO 3 , the optimal microwave dielectric properties of ε r = 45.5, Q × f = 31,771 GHz and a near-zero τ f of 2.43 ppm/℃ were obtained in the CTLA ceramic sample sintered at only 1175 ℃, which is significantly lower (~ 225 ℃) compared to the sintering temperatures of conventionally sintered CTLA ceramics.
✓ 已验证
产品关联
DOI
高影响因子
Nature Communications
·
2020
·Vol. 11
·期 1
·1-7
·
IF 12.121
Ding Baofu,Kuang Wenjun,Pan Yikun,Grigorieva I. V.,Geim A. K.,Liu Bilu,Cheng Hui-Ming
One of the long-sought-after goals in light manipulation is tuning of transmitted interference colours. Previous approaches toward this goal include material chirality, strain and electric-field controls. Alternatively, colour control by magnetic field offers contactless, non-invasive and energy-free advantages but has remained elusive due to feeble magneto-birefringence in conventional transparent media. Here we demonstrate an anomalously large magneto-birefringence effect in transparent suspensions of magnetic two-dimensional crystals, which arises from a combination of a large Cotton-Mouton coefficient and relatively high magnetic saturation birefringence. The effect is orders of magnitude stronger than those previously demonstrated for transparent materials. The transmitted colours of the suspension can be continuously tuned over two-wavelength cycles by moderate magnetic fields below 0.8 T. The work opens a new avenue to tune transmitted colours, and can be further extended to other systems with artificially engineered magnetic birefringence.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Scientific Reports
·
2020
·Vol. 10
·期 1
·1-12
·
IF 3.998
Wang Xianshu,Lin Qian,Pan Hongyan,Jia Shuangzhu,Wu Hong,Shi Yongyong,Wang Zhuhua
Spray drying and a direct carbonization technology were coupled to prepare nitrogen-doped mesoporous carbon nanoparticles (NMCs) using chitosan as a carbon source and nitrogen source precursor and a triblock amphiphilic copolymer (F127) as a soft template, then oxidative modification was performed by ammonium persulfate (APS) to prepare oxidized mesoporous carbon nanoparticles (O-NMCs). The pore structure, chemical composition and wettability of the mesoporous materials were studied before and after oxidative modification, the microscopic morphology, structure, composition and wetting performance of the mesoporous carbon were characterized by transmission electron microscopy (TEM), an X-ray diffractometer (XRD), N 2 adsorption–desorption instrument, X-ray photoelectron spectroscopy (XPS), contact angle tests and other analyses, meanwhile influences of the mesoporous carbon material on adsorption and release performance of a poorly-soluble antitumor drug hydroxycamptothecin (HCPT) were investigated. It was demonstrated from results that the surface wettability of the oxidatively-modified mesoporous carbon material was improved, the contact angle of the mesoporous carbon materials was reduced from 133.4° to 58.2° and the saturated adsorption capacity of HCPT was 676.97 mg/g and 647.20 mg/g respectively. The dissolution rate of the raw material hydroxycamptothecin was improved due to the nanopore structure of the mesoporous carbon material, the dissolution rate of mesoporous carbon material-loaded hydroxycamptothecin was increased from 22.7% to respective 83.40% and 81.11%.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF NANOPARTICLE RESEARCH
·
2020
·Vol. 22
·期 9
·1-11
·
IF 2.132
Zhao Yubin,Li Meng,Matras-Postolek Katarzyna,Yang Ping
Sn 2+ ions were introduced in Cs-Pb-Br nanocrystals (NCs) to test the change of crystal structure and photoluminescence (PL) property. In the cases of Sn/Pb ratios less than 20%, the CsPb 1- x Sn x Br 3 NCs revealed CsPbBr 3 crystal structure. With increasing the Sn/Pb ratio, Cs-Pb-Sn-Br NCs exhibited a mixture phase of CsPbBr 3 and Cs 4 PbBr 6 . The NCs show bright PLQYs (87%) for Sn/Pb molar ratio of 30%. This is ascribed to little amount Cs 4 PbBr 6 decreased the electrons and holes non-radiation recombination of CsPbBr 3 . With increasing the Sn/Pb ratio to 80%, the Cs 4 Pb 1- x Sn x Br 6 NCs exhibited pure Cs 4 PbBr 6 phase structure. Furthermore, a weak blue-emitting peak around 450 nm was observed for the Cs 4 Pb 1- x Sn x Br 6 NCs. This confirms that Sn 2+ ions were successfully introduced into Cs 4 PbBr 6 structure. The morphologies of samples changed from initial cubic to hexagonal with increasing Sn/Pb ratios from 20 to 80%. The excitons and free carrier dynamics of the NCs were discussed. Graphical abstract
✓ 已验证
产品关联
DOI
高影响因子
Science China-Technological Sciences
·
2020
·Vol. 64
·期 1
·65-70
·
IF 2.302
Chen Fang,Shao Bo,Zhai Wei,Ma XiaoYan
The fabrication of high performance CuO based glucose sensors remains a great challenge due to the “trade-off effect” between sensitivity and linear range. In this study, a hierarchical CuO nanostructure with a great number of firecracker-shaped nanorods along the ligament and three-dimensional interconnected nanoporous is obtained by dealloying and post oxidation process of Al-33.3 wt% Cu eutectic alloy ribbons. Because of the precise structural design, not only the number of active sites for glucose electro-oxidation is significantly increased but also the glucose diffusion under high concentration is greatly accelerated, leading to a high sensitivity of 1.18 mA cm −2 mM −1 and a wider linear range up to 5.53 mM for glucose detection. This work provides a potential approach to design hierarchical nanostructure for other metal oxides with desirable properties for electrocatalytic applications.
✓ 已验证
产品关联
DOI
高影响因子
SN Applied Sciences
·
2020
·Vol. 2
·期 12
·1-12
·
IF 0
Wang Yijing,Jin Ling,Xue Tao,Shao Feifei,Yao Yuan,Li Xinxin
The application of pH-responsive superwetting materials receives increasing attention in oil/water separation. In this work, a mussel inspired robust surface coating fabricated with dopamine, copolymer PDMAEMA- co -PHEMA- co -PHFBMA (PDHH) and SiO 2 nanoparticles (DPS) was formed on stainless steel mesh to perform multiple repeatable oil/water separation. Herein, dopamine was chosen to provide strong adhesion strength and durability, endowing the mesh excellent stability in harsh environments, such as mechanical abrasion, acid/alkali immersion and UV irradiation. In virtue of pH stimulation, the as-prepared mesh can be reversibly switched between superhydrophobicity and superhydrophilicity. Moreover, the mesh possesses remarkable oil/water separation efficiency (SE) (≥98%) and desirable recyclability. An oil collector prepared by the mesh and kapok fiber showed good oil absorption capability in the range of 39.67–79.56 g/g. The facile and inexpensive preparation of the durable separation device enables it promising in actual oil/water separation. Graphic abstract
✓ 已验证
产品关联
DOI
JOURNAL OF MATERIALS SCIENCE
·
2020
·Vol. 56
·期 6
·4380-4395
·
IF 3.553
Li Lin,Zhang Peng,Yang Xiucheng,Li Congcong,Guo Yan,Sun Kaoxiang
Abstract A receptor-mediated, active-targeting and glutathione (GSH) turn-on charge-reversal core/shell nanocomplex HA-MEA-s-s-TGA/PAMAM@DOX was constructed to achieve increased stability, improved cellular uptake, facilitated endo-lysosomal escape and enhanced antitumor efficacy. This nanocomplex was composed of anionic hyaluronic acid (HA)-graft GSH-sensitive HA-MEA-s-s-TGA as the outer shell and the cationic PAMAM@DOX core with encapsulated doxorubicin (DOX) into the hydrophobic cavities of polyamidoamine (PAMAM) dendrimers. We hypothesized that the anionic outer layer could promote cellular uptake of HA-MEA-s-s-TGA/PAMAM@DOX by HA receptor-mediated endocytosis. After internalization into tumor cells, the outer shell of the internalized nanocomplex was disassembled in endo-lysosomes via the destruction of disulfide linkages to re-expose PAMAM drug core. This action induced release of the encapsulated DOX and facilitated endo-lysosomal escape through the synergistic action of the proton sponge effect and cationic–anionic interaction between protonated PAMAM and endo-lysosome membranes. In vitro release profiles demonstrated the intracellular environment-responsive release behavior of DOX from this nanocomplex, with a cumulative release of 80% within 4 days in a simulated tumor intracellular microenvironment, whereas the surface charge changed from − 18.82 mV to + 10.95 mV. The MTT assay revealed the good biocompatibility of the negatively charged nanocomplex and efficient toxicity against HeLa cells. The designed pH/GSH dual-responsive nanocomplex could be an efficacious and safe delivery platform for cancer therapy. Graphical abstract
✓ 已验证
产品关联
DOI
高影响因子