IONICS
·
2019
·Vol. 26
·期 1
·263-272
·
IF 2.289
Luo X. Y.,Meng B.,Xia Z. D.,Chen Q. B.,Dong D. Z.,Zhao M. Y.
In order to investigate the effects of Na 2 CO 3 /ZnO co-addition on the sinterability and electrical conductivity of BaZr 0.1 Ce 0.7 Y 0.1 Sc 0.1 O 3-δ (BZCYSc) ceramic, Na 2 CO 3 and ZnO were added and BZCYSc/ZnO/Na 2 CO 3 ceramic was prepared by mechanical ball milling and high-temperature sintering in air. The crystalline structure, micro-morphology, chemical composition, density, and electrical conductivity of the sintered ceramics were characterized by XRD, SEM, EDS, Archimedes method, and electrochemical impedance spectrum, respectively. The grains size of BZCYSc-2%ZnO-5%Na 2 CO 3 is about 2.5~5 μm. Na 2 CO 3 /ZnO co-addition is beneficial to improve the sinterability and electrical conductivity of BZCYSc. The sintering temperature of BZCYSc can be lowered from 1550 to 1350 °C when 2 mol%ZnO is added. At 550 °C, the electrical conductivities of BZCYSc-2%ZnO-10%Na 2 CO 3 and BZCYSc are 1.90 × 10 −3 S/cm and 1.81 × 10 −3 S/cm. The activation energies of BZCYSc and BZCYSc-2%ZnO-10%Na 2 CO 3 are 0.7529 eV and 0.5641 eV, respectively.
研究领域:
材料科学
·
无机非金属材料
·
固态离子学
·
能源材料
·
陶瓷工程
✓ 已验证
DOI
高影响因子
ELECTROCHIMICA ACTA
·
2019
·
IF 5.383
Aijia Wei,Wen Li,Qian Chang,Xue Bai,Rui He,Lihui Zhang,Zhenfa Liu,Yanji Wang
Mg 2+ /F − co-doped LiNi 0.5 Mn 1.5 O 4 cathode material was synthesized by a facile one-step solid-state process. The effect of Mg 2+ /F − co-doping on grain morphology, phase structure, and electrochemical properties was studied by a series of characterizations. Scanning-electron-microscopy images show that Mg 2+ /F − co-doped LiNi 0.5 Mn 1.5 O 4 (denoted LNMO-MF) particles grow larger than pure LiNi 0.5 Mn 1.5 O 4 particles. X-ray diffraction, Raman spectra , Fourier transformation infrared spectroscopy , X-ray photoelectron spectroscopy, and cyclic-voltammetry tests indicate that all samples mainly display a Fd -3m space group and more Mn 3+ ions in the LNMO-MF sample after Mg 2+ /F − co-doping, which is conducive to increasing the cationic disorder degree and enhancing the electronic conductivity of electrode material. Results show that the LNMO-MF cathode material delivers an excellent rate performance with discharge capacities of 142, 144, 140 136, 132, 124, 115, and 100 mAh g −1 at 0.2, 0.5, 1, 2, 3, 5, 7, and 10C (1C = 140 mAh g −1 ), respectively. Remarkably, LNMO-MF also shows cycling stability with a capacity retention of 86.2% at 5C after 400 cycles, which is much higher than that of pure LiNi 0.5 Mn 1.5 O 4 (67.7%). The improvement of LNMO-MF's electrochemical properties could be ascribed to the Mg 2+ /F − co-doping, delivering a more stable structure, better crystallinity , the highest Li + diffusion coefficient , and the lowest charge-transfer resistance.
研究领域:
材料科学
·
电化学
·
无机非金属材料
·
能源存储
·
锂离子电池
·
固态化学
·
功能材料
✓ 已验证
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE & TECHNOLOGY
·
2020
·
IF 6.155
Liqianyun Xu,Liuyang Zhang,Bei Cheng,Jiaguo Yu,Ahmed A. Al-Ghamdi,S. Wageh
Poor conductivity and rate capability are the obstacles faced by nickel-cobalt composites as electrode materials for supercapacitor application. Herein, simple electrochemical treatment conducted by cyclic voltammetry is applied and the overall performance of the active material is considerably enhanced. We discover that this treatment triggers the formation of Ni-Co-Cu ternary composite and optimizes the crystal structure of the untreated counterpart. The areal capacitance of the treated sample rockets up to 6.13 F cm −2 at 2 mA cm −2 , almost 13 times higher than the untreated ones. Besides, the resistance is substantially reduced by cyclic voltammetry treatment. Moreover, the Coulombic efficiency and stability are concurrently elevated. The reasons behind this treatment are mulled over and reasonable hypothesis is suggested. This study provides a cheap and effortless way to reform the structures of as-obtained samples as well as vigorously raise the performance of current available materials.
研究领域:
材料科学
·
电化学
·
纳米材料
·
能源存储
·
功能材料
✓ 已验证
DOI
高影响因子
ACS Sustainable Chemistry & Engineering
·
2020
·
IF 7.632
Enhui Wu,Xiaoshan Feng,Yingbin Zheng,Daifeng Lin,Yongjin Luo,Yufeng You,Baoquan Huang,Qingrong Qian,Qinghua Chen
Mn–Co–O catalysts with different Mn/Co molar ratios were synthesized by means of a facile inverse coprecipitation strategy and applied for the oxidation of propane (C3H8). The XRD pattern of Co2Mn1Oδ (molar ratio of Mn:Co = 1:2) indicates a Co3O4 phase, and most Mn incorporates into Co3O4 lattice to form a solid solution. Minor distributed Mn species occur structure reforming, totally converting to a stable Co–Mn solid solution during oxidation process. Meanwhile, Co2Mn1Oδ features a porous core–shell morphology, the core and shell of which are made up of Co–Mn solid solution, giving rise to a high surface area. The optimized synergistic effect of manganese and cobalt improves low temperature reducibility and produces rich surface active Co3+ species and surface-absorbed oxygen over Co2Mn1Oδ. As a result, it exhibits a prominent excellent catalytic activity, and delivers good thermal stability in the presence of 5 vol % H2O and 5 vol % CO2. In situ DRIFTs analysis displays the reaction path of C3H8 over Co2Mn1Oδ, where dominate intermediate species formate are easily decomposed into CO2. The synthesized porous core–shell Mn–Co–O can be a promising candidate replacing non-noble catalysts toward C3H8 oxidation at low temperature.
研究领域:
催化化学
·
环境化学
·
材料科学
·
多相催化
·
能源与环境科学
✓ 已验证
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2026
·
IF 6.3
Hongwei Zhou,Ying Lin,Yongzhen Ma,Zhao Meng,Haibo Yang
To obtain high-performance electromagnetic wave (EMW) absorption materials with a broad effective absorption bandwidth (EAB), structural design has proven to be an effective strategy. In this investigation, Co/C@carbon nanofibers (Co/C@CNFs) derived from metal-organic frameworks (MOFs) were integrated with graphite oxide (GO) nanosheets, and Co/C@CNFs/GO aerogels were prepared through unidirectional freeze-drying followed by heat treatment. The resulting aerogels exhibit a unique directional channel structure that increases their contact area with air, thereby improving impedance matching. The Co/C@CNFs/GO aerogels demonstrate exceptional EMW capabilities, primarily due to the multiple heterogeneous interfaces and the synergistic electromagnetic loss mechanisms generated by the interactions among GO nanosheets, CNFs, and Co particles. The results reveal that Co/C@CNFs/GO-2 achieves remarkable EMW absorption with a maximum EAB of 10.0 GHz, covering both the X and Ku bands, thanks to its directional channel structure and complete conductive network. Moreover, the aerogels exhibit excellent radar cross-section attenuation and superior thermal insulation. This work provides a reliable strategy for synthesizing multifunctional carbon-based aerogels materials with efficient EMW absorption, offering broad potential for applications in electromagnetic protection, thermal management, and related fields.
✓ 已验证
产品关联
DOI
高影响因子
BIORESOURCE TECHNOLOGY
·
2026
·
IF 9
Xiaoyu Pei,Haoyu Lei,Jiaqi Li,Haojie Zhang,Jun Xie,Meishan Fan
Developing an environmentally friendly and efficient pretreatment method to achieve full-component utilization of biomass components (cellulose, hemicellulose, and lignin) is essential for sustainable biorefining. The TsOH/EG system was applied to simultaneously fractionate the three major constituents, yielding excellent cellulose preservation along with high removal efficiencies for hemicellulose and lignin. Under optimal conditions (2.5 % TsOH (w/w), EG: H 2 O = 60:40 (v/v), 160 °C, 30 min), cellulose retention reached 90.99 %, with complete hemicellulose removal (100 %) and 60.59 % lignin removal achieved. Concurrently, the one-pot catalytic dehydration of hemicellulose yielded 31.44 % furfural. Lignin recovered from the pretreatment liquor via acid precipitation was recycled as the surfactant (LBS) in the fermentation process, enabling the ethanol yield to be maintained at 84.35 % even at a high solid loading of 25 % (w/v). Mass balance and energy analysis further indicate that processing 1 kg of wheat straw (WS) using the 2.5 % TsOH/EG pretreatment can generate 67.35 g furfural, 256.71 g ethanol, and 90.40 g lignin-based surfactant (LBS), achieving an energy recovery rate of 76.82 %.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
APPLIED CATALYSIS A-GENERAL
·
2026
·
IF 4.8
Shengnan Xu,Yu Yu,Fuxin Wang,Jiande Hu,Zixiang Li,Guojun Lv
Cobalt-doped zeolite catalysts have been identified as a potentially viable non-precious metal alternative for toluene oxidation, exhibiting characteristics reminiscent of noble metals, such as the ability to activate C-H bonds, abundance, and minimal adverse environmental impact. However, the catalytic activity is greatly reliant on the diversity of cobalt species embedded within the zeolite framework. To address this, a ligand-engineering strategy was utilized to precisely control the coordination environment of the cobalt precursor, thereby regulating the resulting cobalt species and accordingly the catalytic activity of cobalt-doped zeolite catalysts. Four distinct Co@S-1 zeolites were synthesized with disparate ligands including ethylenediamine, water, ammonia water and acetylacetone, and meanwhile applied as heterogeneous catalysts for the selective oxidation of toluene with molecular oxygen as oxidant. Among them, the Co@S-1(EDA) zeolite catalyst synthesized with ethylenediamine demonstrated superior catalytic reaction performance, achieving a toluene conversion of 63.8 % with a benzaldehyde selectivity of 68.5 % within 6 h of reaction. This eminent catalytic oxidation ability for Co@S-1(EDA) zeolite catalyst is mainly ascribed to its largest Co 2+ /Co 3+ ratio, its most oxygen vacancy amount and its largest external surface area. Furthermore, the Co@S-1(EDA) zeolite catalyst exhibited excellent re-usability, maintaining its activity over five consecutive catalytic cycles. This study emphasizes ligand engineering as an effective approach to create highly efficient and stable cobalt-based zeolite catalysts for selective hydrocarbon oxidation reactions.
✓ 已验证
产品关联
DOI
高影响因子
RSC Advances
·
2026
·Vol. 16
·期 3
·2205
·
IF 4.6
Qilin Guo,Jianchun Ma,Wenbo Lu,Ying Wang,Ergui Luo,He Xiao,Li Zhang,Haishun Wu,Tianjun Hu,Jianfeng Jia
The development of high-performance anode materials remains a critical challenge in advancing microbial fuel cells (MFCs). In this work, we present a novel strategy employing ternary transition metal Co-Fe-Ni sulfides to overcome the inherent trade-off between catalytic activity and structural stability commonly observed in conventional polymetallic sulfides. Through a facile one-pot solvothermal approach, we synthesized low-crystallinity CoFeNiS x (Co-Fe-Ni) ternary sulfides with precisely tunable Co/Fe/Ni molar ratios. When integrated as an MFC anode, the optimized Co-Fe-Ni sulfide delivered a maximum power density of 3915 mW m −2 using Escherichia coli ( E. coli ) as the biocatalyst, representing an 8.4% enhancement over its binary CoFeS x (Co-Fe) analogue. This performance exceeds that of most previously reported carbon-based anodes. The synthesized transition metal sulfides combine ease of fabrication with outstanding electrocatalytic efficiency. Our findings highlight the underexplored potential of ternary transition metal sulfides in engineering next-generation bioelectrochemical interfaces. Doping Ni into Co-Fe anode forms novel intermetallic linkages, accelerating electrochemical kinetics and reducing charge transfer resistance for maximum MFCs power output.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF CATALYSIS
·
2026
·
IF 6.5
Yishuang Wang,Lei Liu,Mingqiang Chen,Defang Liang,Chang Li,Jun Wang,Haosheng Xin
Lignin valorization is crucial for obtained sustainable fuels and chemicals, however its complex structure challenges efficient conversion. Herein, we designed a Ru-modified Co/attapulgite (CoRu x /ATP) catalysts for achieving the catalytic depolymerization of lignin (CDL) under ethanol coupled with H 2 medium to liquid fuel and guaiacols. CoRu 1 /ATP exhibited exceptional catalytic efficiency under optimal conditions, where the yields of liquid product and guaiacols reached 82.82 % and 584.67 mg/g, respectively. Experiments with model compounds demonstrated that the addition of Ru could effectively reduce the activation energy of the β-O-4 bond cleavage, which decreased from 78.6 kJ·mol −1 to 73.5 kJ·mol −1 . Characterization results indicated that the Ru additive yielded Co–Ru interfaces and its hydrogen spillover effect promoted the reduction of Co 3 O 4 to CoO and metallic Co (Co 0 ) to produce more oxygen vacancies (V O ). Additionally, the research on reaction mechanisms revealed V O and CoO phases in CoRu 1 /ATP enhanced the breakage of C–O bonds of lignin and the adjacent metallic Co and Ru sites and Co–Ru interfaces improved the activation of ethanol and molecular hydrogen into active hydrogen (H*) species to stabilize reactive intermediates and enhance hydrogenation reaction. The findings provide a potential method for directional lignin conversion.
✓ 已验证
产品关联
DOI
高影响因子
FOOD CHEMISTRY
·
2026
·
IF 10.4
Juan Huang,Yueyue Zhang,Taoting Li,Chen Chen,Haiyan Yu,Hu Yang,Huaixiang Tian
The interface interactions in Pickering emulsions are determined by the molecules interaction at the microscopic scale in essence. The interfacial properties of β-CD/Tween 60 co-stabilized emulsions were investigated experimentally and numerically. The results show that Tween 60 can increased the hydrophilicity of β-CD. The interface thickness of the β-CD/Tween 60 co-stabilized emulsion is about twice as thick as that of β-CD stabilized system. The formation of hydrogen bonds and electrostatic interaction between β-CD and Tween 60 might be the reason for the variation of surface characteristics of β-CD. Besides, it was demonstrated that the alkyl chain end of Tween 60 can enter into the cavity of β-CD, indicating the formation of the assemblies, approximately 20–30 hydrogen bonds were formed. The magnitude of van der Waals interactions exceeds that of electrostatic interaction, indicating that both hydrogen bonds and van der Waals interactions are the main driving force.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Environmental Chemical Engineering
·
2026
·Vol. 14
·期 3
·122283
·
IF 7.5
Ziwei Wang,Yuxing Tong,Zhichang Liu,Yixin Wang,Ben Liu,Wenjuan Jiang,Song Gao,Shanshan Lei,Lei Wang
Conventional plastic mulch films contribute to persistent soil pollution due to their poor biodegradability. To address this issue, this study developed a biodegradable mulch film with improved overall performance using co-milling technology and an ionic cross-linking strategy. Ultrafine tobacco stalk powder (TSC) was efficiently prepared through co-milling with calcium carbonate, reducing particle size to approximately 25.41 μm. Composite films were fabricated by incorporating TSC into a polyvinyl alcohol (PVA) matrix plasticized with glycerol, followed by Fe 3 ⁺ cross-linking treatment. The optimal TSCF 30 -Fe film exhibited a well-balanced combination of strength, flexibility, and stiffness, with a tensile strength of 11.8 MPa, elongation at break of 123%, and Young's modulus of 42.1 MPa. The Fe 3 ⁺ coordination formed a cross-linked network that enhanced mechanical strength and water resistance, accompanied by a reduced swelling ratio. Furthermore, the composite films demonstrated excellent UV-shielding capability, with strong UV-shielding capability across the 200–400 nm range. Surface hydrophobicity increased with increasing TSC content, which was attributed to the presence of lignin hydrophobic groups. Soil burial tests confirmed biodegradability, showing progressive surface erosion, pore formation, and a continuously increasing degradation rate, whereas commercial films remained intact. This study presents a sustainable approach for valorizing agricultural waste and offers a sustainable strategy for agricultural waste valorization and provides useful insight into the development of biodegradable mulch film materials.
✓ 已验证
产品关联
DOI
高影响因子
BIOLOGICAL TRACE ELEMENT RESEARCH
·
2026
·
IF 4.3
Zhong Zhao-Jin,Chen Kai,Qiu Bo,Chen Pan,Lian Cai-Yu,Wang Lin
Cadmium (Cd) and glyphosate (GLY) are two prevalent environmental contaminants. Their widespread use in agricultural activities has caused frequent co-contamination incidents within ecosystems. The kidney is a primary target organ and the major excretory organ for these pollutants. However, the nephrotoxic effects of their co-exposure on mammals remain unclear. Sixty healthy mice housed in a specific pathogen-free facility were randomly divided into 4 groups ( n = 15) and exposed to GLY (8.75 mg GLY/kg feed) and/or Cd (1.45 mg Cd/kg feed) via diet for 24 weeks; subsequently, the urine, serum, and kidney samples were collected for respective analyses. Data showed that serum levels of renal injury biomarkers in the combined group were significantly higher than those in the alone group, consistent with the renal pathological findings. Urinary levels of proteins and enzymes in the combined group were also markedly higher than those in the alone group, respectively, consistent with the ultrastructural changes of proximal tubular microvilli. Moreover, mitochondria and nuclei in the renal cortex of combined group exhibited more severe ultrastructural damage than those in the alone group, indicating the characteristic of apoptosis. Data from apoptotic assays further suggested that the combined group exhibited more obvious apoptotic damage than those in the alone group. Collectively, these findings demonstrated that GLY itself exhibits low nephrotoxicity, but combined exposure to GLY and Cd significantly enhances Cd’s nephrotoxic effects, characterized by exacerbated apoptotic damage to proximal tubule cells.
✓ 已验证
产品关联
DOI
PubMed
高影响因子