文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第3265至3276个,产品总数4,428个

切换升序
(Ni
Small Methods · 2022 ·Vol. 6 ·期 8 ·2200258 · IF 15.367

Dual In Situ Polymerization Strategy Endowing Rapid Ion Transfer Capability of Polymer Electrolyte toward Ni-Rich-Based Lithium Metal Batteries

Su Wang,Qifang Sun,Yue Ma,Zhenyu Wang,Hongzhou Zhang,Xixi Shi,Dawei Song,Lianqi Zhang,Lingyun Zhu

Poly(vinylidenefluoride- co -hexafluoropropylene) (PVDF-HFP) is one of the most promising candidate electrolyte matrices for high energy batteries. However, the spherical skeleton structure obtained through the conventional method fails to build continuous Li ion transmission channels due to the slow volatilization of high boiling solvent, leading to inferior cycling performance, especially in a Ni-rich system. Herein, a novel strategy is presented to enrich the Li ion transfer paths and improve the Li ion migration kinetics. The tactic is to prepare cross-linked segments through the PVDF-HFP matrix by adopting free radical polymerization and Li salt induced ring-opening polymerization. Most significantly, the visualization of the structure of as-prepared electrolyte is innovatively realized with the combination of polarization microscopy, transmission electron microscopy, scanning electron microscope-energy dispersive spectroscopy, PVDF-HFP, and cross-linked network form interconnected microstructures. Therefore, poly(glycidyl methacrylate and acrylonitrile)@poly(vinylidene fluoride-hexafluoropropylene) electrolyte presents a high ionic conductivity (1.04 mS cm −1 at 30 °C) and a stable voltage profile for a Li/Li cell after 1200 h. After assembly with a LiNi 0.8 Co 0.15 Al 0.05 O 2 cathode, a high discharge specific capacity of 190.3 mAh g −1 is delivered, and the capacity retention reaches 88.2% after 100 cycles. This work provides a promising method for designing high-performance polymer electrolytes for lithium metal batteries.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
THIN SOLID FILMS · 2022 · IF 2.358

Strengthening effect of inclusion of ZrC nano-ceramic particles on the corrosion and wear resistance of Ni-P electroless deposits

Yahui He,Shihong Zhang,Yi He,Hongjie Li,Yi Fan,Yihan Zhang,Yuxin Xiang,Teng He,Ruxia Song,Bo Liu,Zhifei Zhang

Zirconium carbide (ZrC) nano-ceramic particles were embedded in the nickel-phosphorus (Ni-P) nanocomposite coating on the surface of N80 steel through electroless deposition strategy. The addition of ZrC can significantly affect the surface morphology, microstructure, wear resistance and corrosion resistance of the coating. Compared with pure Ni-P coating, the average friction coefficient of Ni-P/ZrC (1 g·L −1 ) composite coating decreased from 0.510 to 0.224, and the specific wear rate is reduced from 1.31 × 10 −5 mm 3 ·m −1 ·N −1 to 2.81 × 10 − 6 mm 3 ·m −1 ·N −1 . In terms of improving the corrosion resistance of the coating, Ni-P/ZrC (1 g·L −1 ) composite coating shows a lower corrosion tendency and a higher electrochemical impedance, and its corrosion rate (4.54 × 10 −3 mm·a −1 ) is one order of magnitude lower than Ni-P coating (5.08 × 10 −2 mm·a −1 ). In addition, the long-term corrosion experiments of the samples show that the composite coating has a longer protective effect on the substrate. Through the analysis of the corrosion morphology, it is found that the improvement of the corrosion resistance of the coating is due to the addition of ZrC, which reduces the surface defects of the coating. At the same time, the labyrinth effect formed between ZrC and the coating can also slow down the corrosion rate.

CAS / MDL: 12070-14-3
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Journal of Environmental Chemical Engineering · 2021 · IF 5.909

Immobilized highly dispersed Ni nanoparticles over porous carbon as an efficient catalyst for selective hydrogenation of furfural and levulinic acid

Putrakumar Balla,Prem Kumar Seelam,Ravi Balaga,Rajendiren Rajesh,Vijayanand Perupogu,Tong Xiang Liang

Sustainable catalysis is the key for the future progress toward biorefinery and bioeconomy. In this work, we designed and developed an inexpensive and eco-friendly Ni@C catalyst for selective hydrogenation of biomass-based platform molecules. A facile synthesized Ni nanoparticles encapsulated in a stabilized carbon support derived from a sacrificial agent copolymer-gel was investigated in the hydrogenation of furfural (FA) to tetrahydrofurfuryl alcohol (THFOL) and levulinic acid (LA) to γ-valeralactone (GVL). The aim is to study the two different reactions over a highly stabilized Ni nanoparticles embedded in the carbon matrix. The Ni@C was found to be active and selective in multi-catalyzed hydrogenation reactions. The Ni nanoparticles with small and ultra-fine sizes are highly dispersed over the carbon matrix. This was concluded through high-resolution micrography images (SEM, TEM) and XRD patterns. In both reactions, a complete conversion of furfural and levulinic acid was achieved with maximum selectivity over the Ni@C catalyst. The effect of reaction temperature, solvent type, reaction time, and H 2 pressure were also studied. Overall, optimized reaction conditions were determined, and the Ni@C is easily reusable and exceptionally durable in the studied reaction cycles. The apparent activation energies for FA hydrogenation to THFOL and LA hydrogenation to GVL are 15.4 kJ/mol and 33.6 kJ/mol, respectively.

CAS / MDL: 56-89-3 89-86-1
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF COLLOID AND INTERFACE SCIENCE · 2021 · IF 8.128

Improving interfacial stability of ultrahigh-voltage lithium metal batteries with single-crystal Ni-rich cathode via a multifunctional additive strategy

Zhi Zhang,Fangyan Liu,Zeyu Huang,Maoyi Yi,Xinming Fan,Maohui Bai,Bo Hong,Zhian Zhang,Jie Li,Yanqing Lai

Electrode (including cathode and anode) /electrolyte interfaces play a vital role in determining battery performance. Especially, high-voltage lithium metal batteries (HVLMBs) with the Ni-rich layered oxide ternary cathode (NCM) can be considered a promising energy storage technology due to their outstanding energy density. However, it is still extremely challenging to address the unstable electrode/electrolyte interface and structural collapse of polycrystalline NCM at high voltage, greatly restraining its practical applications. In this work, a novel electrolyte additive, tris(2-cyanoethyl) borate (TCEB), has been used to construct the robust nitrogen (N) and boron (B)-rich protective films on single-crystal LiNi 0.6 Co 0.1 Mn 0.3 O 2 (SNCM) cathode and lithium metal anode surfaces, which could effectively mitigate parasitic reactions against electrolyte corrosion and retain the structural integrity of electrode. Remarkably, the SNCM||Li metal cell using TCEB-containing electrolyte maintains unprecedentedly superb capacity retention of 80% after 100 cycles at an ultrahigh charging voltage of 4.7 V (versus Li/Li + ). This finding provides a valuable reference to construct a stable electrode/electrolyte interface for the HVLMBs with achieving high-energy density.

CAS / MDL: 872-50-4 24937-79-9
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
JOURNAL OF ALLOYS AND COMPOUNDS · 2021 · IF 5.316

Self-template and in-situ synthesis strategy to construct MnO2/Mn3O4@Ni-Co/GC nanocubes for efficient microwave absorption properties

Jiangshan Gao,Huanhuan Wang,Yang Zhou,Zhiming Liu,Yan He

The combination of magnetic nanoparticles and transition metal oxides has attracted much attention in microwave absorption applications. Herein, the MnO 2 /Mn 3 O 4 @Ni-Co/graphite carbon (GC) nanocubes with porous structure and ultrathin nanosheets was constructed by self-template strategy and in-situ synthesis. The composites not only synergize the magnetic loss of magnetic Ni-Co nanoparticles with the dielectric losses of GC and MnO 2 /Mn 3 O 4 , but also enhance the multiple interface polarization and improve impedance matching. As a result, the MnO 2 /Mn 3 O 4 @Ni-Co/GC nanocubes present outstanding electromagnetic wave (EMW) absorption performances, in which a RL min of −26 dB at 6.4 GHz with a thickness of 4 mm and an effective absorption bandwidth covering from 5.3 GHz to 6.4 GHz are achieved. Meanwhile, the widest effective absorption bandwidth with the value of 3.7 GHz can be achieved at a matching thickness of 2.0 mm. More importantly, this work provides a new strategy for the synthesis of EMW absorbing materials.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF ALLOYS AND COMPOUNDS · 2021 · IF 5.316

Fabrication of hierarchical NiCo2S4 nanotubes@NiMn-LDH nanosheets core-shell hybrid arrays on Ni foam for high-performance asymmetric supercapacitors

Ying Xue,Xilong Liu,Leiyun Han,Zhengjie Xie,Liangyu Liu,Yixin Li,Yingjie Hua,Chongtai Wang,Xudong Zhao,Xiaoyang Liu

The present study successfully synthesized NiCo 2 S 4 nanotubes@NiMn-LDH nanosheets core-shell hybrid structure on Ni foam through a controllable three-step facile hydrothermal method , the NiMn-layered double hydroxides (LDHs) nanosheets with unlike thicknesses adhere to the outer layer of NiCo 2 S 4 nanotubes by adjusting the heating time of hydrothermal reaction. The optimized NiCo 2 S 4 @NiMn-LDH electrode was able to transmit a high specific capacity of 822.64 C g −1 (4.36 C cm −2 ) at a high current density of 50 mA cm −2 , and maintained 92.7% of its initial specific capacity after 5000 cycles at a current density of 50 mA cm −2 when 2 M KOH was used as the electrolyte. Furthermore, an asymmetric supercapacitor (ASC) device fabricated with NiCo 2 S 4 @NiMn-LDH as the positive electrode and activated carbon (AC) as the negative electrode, and it achieved a maximal energy density of 53.10 W h kg −1 at a power density of 370.82 W kg −1 also maintained 94.3% retention of the initial specific capacitance after 10,000 cycles at a high current density of 20 mA cm −2 . With the excellent electrochemical properties , the as-prepared core-shell structured NiCo 2 S 4 @NiMn-LDH hybrid arrays have extraordinary application potential in the energy storage field.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ELECTROCHIMICA ACTA · 2021 · IF 6.901

Integration of heterointerface and porosity engineering to achieve efficient hydrogen evolution of 2D porous NiMoN nanobelts coupled with Ni particles

Zhihui Li,Aiping Wu,Ying Xie,Ying Gu,Haijing Yan,Dongxu Wang,Siyu Wang,Chengxu Jin,Lei Wang,Chungui Tian

The design of the electrocatalysts with the plentiful heterojuctional interface and large-accessible surface is desired to boost the HER performance, but it remains a challenge. Herein, we showed the design of 2D Ni/Ni 0.2 Mo 0.8 N porous heterojunction nanobelts as effective catalyst for the HER. The intimate combination of Ni and Ni 0.2 Mo 0.8 N can make the formation of the heterojuctional interface with plentiful active sites. The 2D porous structure can provide large accessible surface with less resistance for the transmission of the electrolytes, thus promoting the mass/charge transfer. The ratio of Ni and Ni 0.2 Mo 0.8 N can be easily tuned by regulating the precursor composition, which is important to give catalysts with optimized interface and suitable pores. Density functional theory calculations reveal that the interaction between Ni and Ni 0.2 Mo 0.8 N at the heterointerface can largely improve the intermediate H* adsorption kinetics (ΔG H*  = -0.07 eV). Due to the above advantages, the optimized catalysts exhibited excellent HER activity with a low overpotential of 48 mV in 1 M KOH at 10 mA cm −2 (without iR correction), which is superior to the most reported non-noble metal-based catalysts, and the long-term durability with no obvious degradation after continual operation of 48 h Notably, an electrolyzer assembled by the optimized Ni/Ni 0.2 Mo 0.8 N cathode with NiFe-LDH anode only requires a low operating voltage of 1.47 V to deliver 10 mA cm −2 in 1 M KOH, surpassing the corresponding Pt/NF||RuO 2 /NF electrolyzer (1.61 V) and most of reported electrolyzers.

CAS / MDL: 7439-98-7
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY · 2021 · IF 6.064

Synthesis of γ-valerolactone from ethyl levulinate hydrogenation and ethyl 4-hydroxypentanoate lactonization over supported Cu-Ni bimetallic, bifunctional catalysts

Yafei Li,Xiaocheng Lan,Boyang Liu,Tiefeng Wang

A stable and highly efficient supported Cu-Ni catalysts for the conversion of ethyl levulinate (EL) to γ-valerolactone (GVL) was developed. The catalysts were characterized by XRD, TEM, TPD, TPR, and XPS. The support effect of metal oxides (Al 2 O 3 , SiO 2 , ZrO 2 , and TiO 2 ) revealed that Cu-Ni supported on Al 2 O 3 showed the highest activity for EL hydrogenation to ethyl 4-hydroxypentanoate (EHP) and the subsequent intramolecular esterification of EHP to GVL. EHP intramolecular esterification to GVL in the ethanol solution was a reversible reaction with an equilibrium constant of 24 at 453 K. A simplified reaction kinetic network was established. The solvent had a significant influence on the reaction equilibrium and the catalyst stability. Cu-Ni/Al 2 O 3 in n-hexane solvent gave a higher GVL yield than that in ethanol solvent, and showed better recyclability than that in toluene solvent. With optimizing the conditions, Cu-Ni/Al 2 O 3 gave 99.9% conversion and 98% selectivity to GVL with a space–time yield of 1.13 g GVL g cat -1 h −1 in n-hexane solvent with good recyclability.

CAS / MDL: 13478-00-7
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF COLLOID AND INTERFACE SCIENCE · 2021 · IF 8.128

Synthesis of Ni modified Au@CdS core–shell nanostructures for enhancing photocatalytic coproduction of hydrogen and benzaldehyde under visible light

Ziqiang Zheng,Ting Wang,Fang Han,Qing Yang,Benxia Li

The development of visible light responsive photocatalysts for simultaneous production of hydrogen (H 2 ) fuel and value-added chemicals is greatly promising to solve the energy and environmental issues by improving the utilization efficiency of solar energy. Herein, the three-component Ni/(Au@CdS) core–shell nanostructures were constructed by the hydrothermal synthesis followed with photodeposition. The intimate integration of plasmonic Au nanospheres and visible-light responsive CdS shells modified with Ni cocatalyst facilitated the generation and separation of electron-hole pairs as well as reduced the overpotential of hydrogen evolution. The Ni/(Au@CdS) photocatalyst exhibited excellent performance toward the selective transformation of benzyl alcohol under anaerobic conditions, and the yields of H 2 and benzaldehyde reached up to 3882 and 4242 μmol·g −1 ·h −1 , respectively. The apparent quantum efficiency (AQE) was determined to be 4.09% under the irradiation of 420 nm. The systematic studies have verified the synergy of plasmonic effect and metal cocatalyst on enhancing the photocatalysis. This work highlights the desirable design and potential application of plasmonic photocatalysts for solar-driven coproduction of H 2 fuel and high-value chemicals.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
JOURNAL OF COLLOID AND INTERFACE SCIENCE · 2021 · IF 8.128

Developing nitrogen and Co/Fe/Ni multi-doped carbon nanotubes as high-performance bifunctional catalyst for rechargeable zinc-air battery

Di Chen,Guofu Li,Xing Chen,Qian Zhang,Jing Sui,Chengjie Li,Yingchao Zhang,Jing Hu,Jianhua Yu,Liyan Yu,Lifeng Dong

Rational construction of advanced bifunctional catalysts with dual-active-sites is still challenging for both oxygen reduction (ORR) and oxygen evolution reactions (OER). Herein, metal-doped dicyandiamide formaldehyde resin is innovatively exploited to synthesize N/Co/Fe/Ni multi-doped carbon nanotubes (denoted as CoFeNi@CNT) with metal-nitrogen-carbon (M N C) and CoFeNi nanoparticles as the ORR and OER active sites, respectively. Abundant active sites and high degree of graphitization enable CoFeNi@CNT with a high ORR half-wave potential of 0.82 V and a low OER overpotential of 440 mV at 10 mA cm −2 , which are comparable or superior to noble-metal catalysts. Particularly, the CoFeNi@CNT air electrode of rechargeable Zn-air batteries shows remarkable open circuit potential (1.46 V), discharge power density (152.3 mW cm −2 ), specific capacity (814 mAh g −1 ), and cycling stability for more than 250 h. It is worth emphasizing that this synthesis strategy is rather simple, low-cost, high yield, and the proportion and amount of doped metal ions can be easily adjusted according to the needs for different applications.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
FUEL · 2021 · IF 6.609

Conversion of Kraft lignin to phenol monomers and liquid fuel over trimetallic catalyst W-Ni-Mo/sepiolite under supercritical ethanol

Mingqiang Chen,Jingjing Shi,Yishuang Wang,Zhiyuan Tang,Zhonglian Yang,Jun Wang,Han Zhang

Highly efficient conversion of lignin to value-added liquid fuel or phenol monomers has attracted widespread attentions. The W-Ni-Mo/SEP trimetallic catalyst was firstly prepared and used for lignin catalytic depolymerization (LCD) under supercritical ethanol, which significantly ameliorated the problem of complex product compositions and poor cycle-stability in Mo/SEP. Characterization results confirmed that doping W and Ni metals led to the transformation of metallic oxide phases, and then increased oxygen vacancies (O V ), enhanced the metal-support interaction, and lowered acid site content. The experimental results revealed that W-Ni-Mo/SEP yielded 39.56% of lignin oil (LO) with 32.37 MJ/kg of HHV at 280 °C for 4 h. The selectivity to guaiacol and ethoxyphenol monomer was remarkably increased as compare with Mo/SEP. Furthermore, the W-Ni-Mo/SEP catalyst exhibited unique cycle stability and produced LO even increased to 41.41% after five LCD cycles. The possible reaction paths of lignin converted to guaiacol and ethoxyphenol over W-Ni-Mo/SEP were proposed. Brønsted-acid site promoted the self-activation of ethanol to form aliphatic products. The higher O V preferentially adsorbed phenol-intermediates containing dual oxygens and activated direct dealkylation to obtain guaiacol. The lower Lewis-acid site promoted the demethylation of methoxy in side-chains of phenol-intermediates and then interacted with free ethyl groups to form ethoxyphenol.

CAS / MDL: 90-05-1 108-95-2
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS · 2021 ·Vol. 32 ·期 13 ·17105-17114 · IF 2.478

Effect of heat treatment on structural and magnetic properties of Li–Ni ferrite prepared via sol–gel auto-combustion method

Song Jiali,Wang Zhi,Gao Yu

Nanocrystalline Li 0 . 35 Ni 0.3 Fe 2.35 O 4 ferrites were prepared at different annealing temperatures by sol–gel auto-combustion method. The effects of the annealing temperature on the structure and magnetic properties of the synthesized Li–Ni ferrites were characterized by X-ray diffraction (XRD), scanning electron microscopy, Fourier transform infrared spectra and Vibrating Sample Magnetometer, and X-ray photoelectron spectrometer. Rietveld refinement of the XRD data confirmed the occurrence of phase transition from α-spinel to β-spinel, from which the ideal cation occupation and lattice parameter can be obtained. The grain size increased significantly with annealing temperature. The variation of saturation magnetization can be well explained in terms of the occupation of ions in tetrahedron and octahedron. The coercivity initially increased and later decreased significantly from 115 to 37 Oe with the increase of annealed temperature which could be attributed the fact that the 600 °C-annealed grain size is close to transition size from single- to multi-domain region.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。