文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第3265至3276个,产品总数6,196个

切换升序
1
Nature Communications · 2026 · IF 18.1

Breaking the activity-selectivity dilemma in direct electrocatalytic hydrogenolysis of furfural into furanic biofuel

Zhuang Xiuzheng,Liu Ke,Zhang Wenjie,Chen Gehao,Zhang Qi,Chen Lungang,Zhang Xinghua,Ma Longlong

Electrocatalytic hydrogenolysis of biomass-derived furfural usually encounters the disordered flow of electrons, particularly for the formation of 2-methylfuran with a complex four-electron transfer process. To address this, we develops an intermediates coverage-induced strategy through the mixed valences in copper clusters wrapped by carbonaceous matrix, which boosts the transfer of electrons toward 2-methylfuran with dual advantages in kinetics and thermodynamics. Experimental results indicate that the carbonaceous matrix create a furural-favorable environment for less adsorption of H + ; on it surface, the cleavage of C-O bonds in Fur-CH 2 OH * can be easily activated by Cu + sites for 2-methylfuran, while partial participation of Cu 0 accelerates the hydrogenation processes with an enhancement of local H * concentration, leading to the high selectivity and faradaic efficiency at 89.8% and 76.6%, respectively. In addition, the coexistence of Cu + and Cu 0 is also stable under cathodic conditions, but the deposition of polymers disturbs the intermediates coverage, which is subsequently mitigated through the continuous-flow reactor. This study provides insights into the interfacial modulation on electrode surface, advancing the development of efficient electrocatalysts for biomass valorization.

CAS / MDL: 333-20-0
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
BMC Veterinary Research · 2026 · IF 3.1

Dual regulation of bile acids: ameliorating hepatic glycolipid disorders and restoring intestinal health in HFHC-challenged Yellow River carp (Cyprinus carpio L.)

Yan Xiao,Yang Bowen,Mi Jiali,Zhi Shaoyang,Feng Junchang,Cheng Lijiao,Wang Junli,Qin Chaobin,Nie Guoxing

Background This study was designed to investigate how three distinct bile acids (BAs) modulate glycolipid metabolic disorders and hepatointestinal injury induced by excessive intake of lipids and carbohydrates in Yellow River carp ( Cyprinus carpio L.) and elucidate the underlying mechanisms involved. Here, the fish were randomly assigned to five groups: a control group (CON), a high-fat high-carbohydrate diet (HFHC) group, a HFHC + 300 mg/kg chenodeoxycholic acid (CDCA) group, a HFHC + 300 mg/kg ursodeoxycholic acid (UDCA) group and a HFHC + 300 mg/kg hyodeoxycholic acid (HDCA) group. Results The results revealed that the serum triglyceride, glucose, and total cholesterol levels were significantly elevated in HFHC-fed fish, accompanied by increased glutamic-oxaloacetic transaminase (GOT) and glutamic-pyruvic transaminase (GPT) activities in the serum and hepatopancreas. However, dietary supplementation with bile acids in the HFHC diet significantly improved these negative changes. Analysis of BA-glycolipid metabolism-related gene expression and enzyme activities in the hepatopancreas revealed that CDCA and HDCA inhibited gluconeogenesis (FBPase/PEPCK/G6Pase) and lipogenesis (SREBP-1/FAS), while promoting glycogen accumulation (genes and glycogen levels) and fatty acid β-oxidation (PPARα) via activation of the FXR (farnesoid X receptor) /SHP (small heterodimer partner) pathway. In contrast, dietary UDCA supplementation increased intestinal TGR5 (takeda G protein-coupled receptor 5) expression and suppressed the activities of two key gluconeogenic enzymes, PEPCK and G6Pase. Additionally, dietary BAs supplementation alleviated HFHC diet-induced intestinal inflammation by inhibiting the NF-κB (Nuclear Factor κB) pathway. Bile acids relieved gut dysbiosis, improved microbial alpha diversity and community structure, and enriched beneficial bacteria including Cetobacterium somerae . These microbial changes eventually modulated host substance synthesis and metabolism. HE staining showed that HFHC diet caused hepatopancreatic lesions and intestinal morphological damage in Yellow River carp, which were effectively alleviated by bile acid addition. Conclusions In conclusion, HFHC diets disrupt fish glycolipid metabolism and impair hepato-intestinal health in Yellow River carp, whereas dietary BAs can attenuate these detrimental effects by modulating metabolic pathways and the gut microbiota composition. Graphical

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
Journal of Gastrointestinal Oncology · 2026 ·Vol. 17 ·期 3 ·135 · IF 2.1

Evaluating the prognostic value of cuproptosis-related genes and characterizing PDE3B’s role in gastric cancer: integrative bioinformatics analysis and experimental validation

Linhui Chen,Zi Wang,Yanjun Guo,Chenyang Li,Guoxin Zhang

Background The identification of cuproptosis offers novel insights into therapeutic strategies for neoplastic diseases. We explore whether cuproptosis and cuproptosis-related genes (CRGs) could provide novel perspectives for the prognosis and treatment of gastric cancer patients. Methods RNA sequencing data of gastric cancer patients were retrieved from The Cancer Genome Atlas Program (TCGA), CRGs in gastric cancer were analyzed through bioinformatics methods. Subsequent experiments, including Western blotting (WB), quantitative real-time polymerase chain reaction (qRT-PCR), immunofluorescence, 5-Ethynyl-2’-deoxyuridine assay, Cell Counting Kit-8 assay, Transwell assay, transmission electron microscopy, and xenograft tumor formation in nude mice, were conducted to further validate the biological role of the key CRG PDE3B in gastric cancer. Results We confirmed CP, MAP2K2, and PDE3B as key genes for the prognostic classifier. Knockdown of PDE3B effectively suppressed the pro-tumorigenic functions in gastric cancer cell malignant proliferation and progression. Elesclomol-CuCl 2 (ES-Cu) triggered canonical cuproptosis features in gastric cancer cells, and PDE3B expression was downregulated during this process. Notably, the inhibition of PDE3B significantly potentiated ES-Cu induced cuproptosis. Conclusions We characterized the landscape of CRG dysregulation in gastric cancer, verified that ES-Cu exhibited a significant cytotoxic effect on gastric cancer, and elucidated the pivotal role of PDE3B in gastric cancer.

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
Scientific Reports · 2026 · IF 4.9

GATA1 silencing restrains granulosa cell ferroptosis through downregulation of TFRC in polycystic ovary syndrome

Wang Ying,Zhang Qi,Liu Jiahui,Kuang Hongying,Feng Xiaoling

Polycystic ovary syndrome (PCOS) is the most prevalent endocrine disorder among women of childbearing age and the leading cause of anovulatory infertility worldwide, with the death of granulosa cells implicated in its pathogenesis. However, the mechanisms underlying granulosa cell death remain unclear. Limited research has explored the association between GATA binding factor 1 (GATA1) and adverse pregnancy outcomes, yet its role in PCOS is still elusive. This study established an in vivo PCOS model via dehydroepiandrosterone administration in mice and used ovarian-like KGN cells to explore granulosa cell function. Results showed elevated ovarian GATA1 expression in PCOS mice. Functionally, GATA1 overexpression in KGN cells increased lipid reactive oxygen species, malondialdehyde, and iron, while reducing glutathione. Notably, all these effects of GATA1 were mitigated by a ferroptosis inhibitor Ferrostatin-1. Furthermore, GATA1 knockdown alleviated lipid peroxidation and iron overload in KGN cells induced by a ferroptosis inducer Erastin. Mechanistically, GATA1 directly bound the transferrin receptor (TFRC) promoter to enhance its transcription. Additionally, TFRC overexpression counteracted GATA1 knockdown’s protective effects against Erastin-induced ferroptosis. Collectively, GATA1 promotes granulosa cell ferroptosis via TFRC transcriptional activation, contributing to PCOS pathogenesis. GATA1 regulatory pathways may serve as potential therapeutic targets for PCOS.

CAS / MDL: 1330-20-7 53-43-0
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
JOURNAL OF MATERIALS SCIENCE · 2026 · IF 4.4

Development of a nonylphenol-based Mannich base curing agent for high-performance underwater epoxy adhesives

Zhao Daoxiang,Ma Ning,Liu Changwei,Li Gang,Cui Baojun,Zheng Shuai,Song Junjun,Yang Jie,Du Ming,Abd-El-Aziz Alaa S.

In response to the critical need for high-performance epoxy adhesives in underwater repair and engineering, this study prepared a novel Mannich base to serve as a curing agent for modified epoxy resin systems. The Mannich base was synthesized via the condensation reaction of nonylphenol, paraformaldehyde, and triethylenetetramine, incorporating both strongly hydrophilic groups and rigid benzene rings into its molecular structure to facilitate efficient penetration and rapid curing in aquatic environments. Mechanistic analysis indicated that the strong hydrophilicity of the Mannich base allowed it to effectively displace the water film on the surface of the substrate, while its active amine groups can react with epoxy groups in an aqueous environment, forming a dense, stable cross-linked network. The resulting Mannich base compound allowed for effective underwater curing of the epoxy resin. The cured adhesive exhibited curing rates exceeding 87% under all applied conditions. Based on this curing agent, the prepared underwater adhesive could achieve curing and bonding at room temperature in an underwater environment, with a bonding strength of up to 4.32 MPa, demonstrating its capability for effective adhesion in underwater conditions. This work provides a promising new approach for the synthesis of curing agents with broad potential for applications in marine engineering, hydraulic infrastructure repair, and other related fields. Graphical abstract A novel nonylphenol-based Mannich amine curing agent (1-OH-TETA) was synthesized for underwater epoxy adhesives. It effectively displaced interfacial water and enabled rapid curing in aqueous environments. The resulting adhesive achieved a strong underwater bond strength of 4.32 MPa, demonstrating excellent water resistance and durability for marine and hydraulic engineering applications.

CAS / MDL: 30525-89-4
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF MATERIALS SCIENCE · 2026 ·Vol. 61 ·期 36 ·26987-27005 · IF 4.4

Mechanisms governing the influence of silane-modified recycled wind turbine blade glass fiber-reinforced polymer particles on the cement paste interface and mechanical properties

Wang Haoying,Tao Qiang,Qi Maowen

To enable the high-value utilization of decommissioned wind turbine blades, this study presents a new strategy that goes beyond using recycled glass fiber-reinforced polymer (GFRP) as inert fillers or high-replacement supplementary cementitious materials. Glass fiber-reinforced polymer from retired blades was mechanically ground into micro-scale particles and surface-functionalized using an epoxy–silane coupling agent. The treated particles were incorporated into a cement paste at low dosages, ranging from 1 to 5 wt.%. The silane interface modification effectively improves the interfacial bonding between GFRP particles and the cement matrix, optimizes the microstructure and thus enhances the mechanical properties of the composites. Multi-scale characterization shows that silane modification reconstructs the interface between recycled particles and the cement matrix. The conventional low-modulus and porous interfacial transition zone is replaced by a gradient-strengthening layer with an elastic modulus that increases from the matrix to the particles. Meanwhile, the volume fraction of harmful pores larger than 50 nm is significantly reduced. The 28 d compressive strength of cement paste with 3 wt.% silane-modified particles is increased by approximately 40% compared with plain cement paste and is considerably higher than that with unmodified particles at the same dosage. These results confirm that mechanically recycled wind turbine blade particles can act as effective micro-reinforcing phases in cement-based materials at very low dosages after interface engineering. This work presents a feasible and high-value pathway for recycling thermoset composite waste from retired wind turbine blades.

CAS / MDL: 77-58-7
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS · 2026 ·Vol. 37 ·期 21 ·1675 · IF 3.2

Mechanically robust PEDOT:PSS/Ti3C2Tx MXene–silver nanowire nanocomposites for high-performance electromagnetic interference shielding

Naseer Abou Bakar,Nadeem Muhammad,Younis Adnan,Aziz-ur-Rehman,Rehman Ubaid ur,Ali Tahir,Hussain Shahzad

The rapid advancement of highly integrated and compact electronics has spurred an urgent demand for ultrathin, lightweight, and flexible electromagnetic interference (EMI) shielding materials that combine superior shielding effectiveness (SE) with robust mechanical durability. To address this challenge, we engineered flexible and lightweight composite films composed of MXene nanosheets, 1D silver nanowires (AgNWs), and a conductive PEDOT: PSS polymer via a scalable vacuum-assisted filtration process. The resulted co-continuous segregated structure endows the composite films with exceptional electrical conductivity, mechanical resilience, and outstanding EMI shielding performance. Notably, the ultrathin (0.014 mm) binary MXene/AgNW (1:1) BMA50 composite film achieves an exceptional EMI SE of 65 dB in the X-band (8.2–12.4 GHz), corresponding to a remarkable specific shielding effectiveness (SSE) of 26,784 dB cm 2  g −1 . Furthermore, the ternary composite film TMA10 (0.032 mm) incorporating MXene, AgNWs, and PEDOT: PSS exhibited an EMI SE of 50 dB with improved mechanical strength (120 MPa) compared to the binary composite with an SSE of 6847 dB cm 2  g −1 . All fabricated films exhibit a shielding efficiency greater than 99.99%, making them highly suitable for practical applications. The PEDOT:PSS/Ti 3 C 2 T x –AgNW ternary composite exhibited significantly enhanced mechanical performance compared to the MXene–AgNW binary system, achieving a maximum tensile strength of 120 MPa, a Young’s modulus of approximately 2.8 GPa, and superior toughness, owing to the synergistic reinforcement of the conductive polymer and AgNW-bridged MXene network. The synergistic interaction between AgNWs and MXene within the PEDOT:PSS matrix enhances electrical conductivity and forms a porous yet mechanically robust framework, enabling efficient EMI shielding while maintaining flexibility. This scalable strategy offers a promising route for high-performance flexible EMI shielding materials.

CAS / MDL: 7789-24-4 196506-01-1
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CELLULOSE · 2026 · IF 4.6

Chlorine dioxide removes lignin for high-purity cellulose

Xu Hao,Zeng Xianting,Bin Yanling,Wu Renman,Liu Liting,Qin Chengrong,Liang Chen,Yao Shuangquan,Mo Wenxuan,Liu Baojie

Chlorine dioxide (ClO 2 ) is a strong oxidative free radical. Under its oxidative action, lignin was effectively degraded at temperatures between 50 and 80 °C. However, excessively high temperatures can lead to energy waste and enhance chlorination by-reactions, resulting in the formation of harmful substances. Therefore, this study constructed a high-concentration chlorine dioxide oxidation method, whereby lignin in pulp was effectively removed at room temperature (25 °C). Through efficient recycling of chlorine dioxide, the remaining ClO 2 does not increase costs, and the physicochemical properties of the pulp before and after treatment indicate that high concentrations of ClO 2 at room temperature do not damage the fibers. Using a ball-milling device, a nanocellulose membrane with good air permeability was prepared. Molecular dynamics simulations demonstrate that the reaction between lignin molecules and ClO 2 molecules is primarily guided by van der Waals interactions, with a lesser contribution from electrostatic forces. This finding provides a novel method for fiber purification at room temperature and proposes a feasible approach for the valorization of cellulose.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Journal of Food Measurement and Characterization · 2026 · IF 3.6

Cu2S/AFCNTs-based MIP sensors: voltammetric mechanism for sensitive BPA detection in milk

Zhang Xia,Sun Yizhan,Ben Yingying,Liu Ru,Lv Shuwen,Xu Yuandong,Li Peng

An electrochemical molecularly imprinted polymer (MIP) sensor is developed for sensitive detection of bisphenol A (BPA) based on leaf-like Cu 2 S/activated functionalized carbon nanotubes (AFCNTs) nanocomposite as the conductive substrate. The Cu 2 S/AFCNTs composite shows a BET specific surface area of 24.7 m 2 g − 1 , which is approximately eight times higher than that of the pure Cu 2 S (3.3 m 2 g − 1 ). This enlarged surface area contributes to abundant accessible active sites and promotes efficient electron transfer. The electroactive area of the Cu 2 S/AFCNTs-modified electrode is 0.40 cm 2 which is fivefold higher than the bare electrode (0.08 cm 2 ). The MIP film is electropolymerized onto the composite surface with a thickness of 2.91 nm. Mechanistic studies confirm that BPA oxidation is an adsorption-controlled irreversible process involving 2H + /2e − . Under optimized conditions, the sensor displays a broad linear range from 0.9 to 20 µM and a limit of detection of 0.19 µM with high selectivity against common interferents. The sensor also demonstrates good reproducibility (RSD 4.2%) and stability. Practical applicability is validated by determination of BPA in milk samples, with recoveries ranging from 99% to 102.1% (RSD 2.1 ~ 3.7%). This work highlights the synergistic enhancement of Cu 2 S and AFCNTs for constructing high-performance MIP-based electrochemical sensors for food safety monitoring.

CAS / MDL: 7447-40-7 80-05-7
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
TRANSACTIONS OF TIANJIN UNIVERSITY · 2026 · IF 7.8

Mg-modified Pt/ZSM-48 for Efficient and Selective Hydroisomerization of Long-Chain Alkanes

Gong Mengcong,Wang Qingfa,Liu Linlin,Zhang Xiangwen

ZSM-48 zeolite, which features one-dimensional ten-membered-ring straight channels, is an ideal support for hydroisomerization catalysts to improve fuel low-temperature fluidity. To improve the poor low-temperature fluidity of Fischer–Tropsch synthesis products, this study employed Mg modification on Pt/ZSM-48 catalysts to optimize their hydroisomerization performance. A series of Mg-Pt/ZSM-48 catalysts with varying Mg loadings was prepared via incipient wetness impregnation. The effects of Mg modification on the pore structure, acidity, and metal–acid balance of the Pt/ZSM-48 catalyst system were systematically investigated. Catalytic performance was evaluated using n-hexadecane as a model compound. The Mg species selectively modified the micropore channels, decreasing the specific surface area and micropore volume. Moreover, Mg 2+ selectively neutralized Brønsted acid sites, reducing the concentration of medium-strong acid sites and Brønsted acidity while introducing Lewis acid sites, thereby lowering the Brønsted/Lewis acid ratio. Appropriate Mg modification optimized the metal–acid balance, making acid-catalyzed skeletal isomerization the rate-determining step. Although the Mg-modified catalysts exhibited moderately reduced catalytic activity, their isomer selectivity and yield were significantly enhanced. The 0.5 Mg-Pt/Z48 catalyst achieved an isomer yield of 81.81% at 91.18% conversion, representing a 9% improvement over the unmodified catalyst. The micropore confinement effect weakened the interaction between alkane molecules and micropore channels, promoting the key–lock catalytic mechanism. This increased the formation of mono-branched isomers close to the center of the main carbon chain, significantly improving the low-temperature fluidity of the fuel. This study provides a simple and efficient strategy for designing high-performance hydroisomerization catalysts for long-chain n-alkanes. Graphical

CAS / MDL: 544-76-3
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Science China-Materials · 2025 ·Vol. 69 ·期 1 ·521-532 · IF 7.4

Quasi-metal 2D Ag2Te nanosheets for high performance surface-enhanced Raman scattering detection

Liang Huijun,Xia Qian,Liu Tong,Su Jingting,Hu Pengyu,Zhang Tuo,Wang Qin,Chen Qian,Tao Li,Wang Zhuyuan,Zhu Li

Semiconductor-based surface-enhanced Raman scattering (SERS) substrates have garnered significant attention due to high uniformity, reproducibility, stability, and cost-effectiveness. However, the Raman enhancement in semiconductors primarily relies on the chemical mechanism (CM), which typically results in a lower enhancement capability compared to traditional noble metals. In this study, we developed a novel two-dimensional (2D) SERS substrate, Ag 2 Te nanosheets (NSs), synthesized through a simple one-step redox reaction utilizing 2D Te NSs as the template. The 2D Ag 2 Te NSs not only exhibit strong interfacial interactions with molecules, thereby supporting the CM, but also possess quasi-metallic properties with low resistivity (2.8 × 10 −4 Ω cm) and high density of free electrons (4.15 × 10 22 cm −3 ), giving rise to a significant visible-region surface plasmon resonance (SPR) band and contributing to enormous electromagnetic mechanism (EM). By synergizing CM and EM, the 2D Ag 2 Te NSs SERS substrate achieved an ultra-low limit of detection (LOD) of 10 −10 M with an enhancement factor (EF) of 2.6 × 10 7 for methylene blue (MB), outperforming most semiconductors, even rivaling noble metals. The quasi-metallic properties of 2D Ag 2 Te NSs also benefit their sensitivity to multiple molecules. The accuracy and reliability were demonstrated in real-sample detections with recoveries of 91.5%–108.3% for various target molecules. These excellent performances, combined with remarkable cost-effectiveness, demonstrate the potential of 2D Ag 2 Te NSs as a practical SERS substrate with broad applicability. Furthermore, the inherent structural simplicity of these nanosheets creates significant opportunities for further sophisticated nanostructural engineering to advance the SERS performance in the future.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS · 2026 ·Vol. 37 ·期 22 ·1713 · IF 3.2

Multiscale interconnected lead-free piezoceramic skeleton-based flexible piezoelectric sensors for wearable electronics and energy harvesting

Xu Zhichao,Li Chenglong,Wang Shuai,Lv Qilin,Zou Shuyan,Xu Jing,Dong Tianming,Wang Jianhao,Li Xinyu,Su Daojian,Yang Changhong

Flexible piezoelectric sensors (FPS), enabling direct mechano-electrical conversion, have emerged as promising candidates for self-powered sensing in wearable electronics and ambient energy harvesting. However, their practical applications remain constrained by poor mechanical durability, limited flexibility, and intrinsic material toxicity. Here, we report a low-cost sacrificial templating strategy to construct a three-dimensional (3D) Mn-doped BiFeO 3 (BFOMn) ceramic skeleton embedded in a soft polydimethylsiloxane (PDMS) matrix, yielding an ultra-flexible piezoelectric composite. The assembled FPS exhibits excellent electromechanical conversion, achieving a piezoelectric coefficient of 16.2 ± 0.9 pC/N and a high open-circuit voltage of 14.2 ± 1.0 V. Notably, the device maintains outstanding mechanical durability and stability, with < 3% voltage degradation even after 13,000 loading cycles and prolonged storage. Furthermore, demonstrations of human motion monitoring, light-emitting diode (LED) powering, and capacitor charging highlight its potential for practical applications. This work establishes a robust and generalizable strategy for lead-free FPS with improved performance, with potential applicability to diverse material systems and next-generation self-powered wearable electronics.

CAS / MDL: 10035-06-0 123-54-6
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。