INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2024
·
IF 7.7
Mengting Zhang,Shujun Liu,Xianqiang Gao,Xiaokang Jiang,Enze Zhang,Hai Fan,Shuhua Zhu
Cellulose acetate film, as a biodegradable and biomass-derived material, has great potential applications in food packaging. However, the poor mechanical and antibacterial properties limit its applications. Herein, a highly flexible carbon nitride-polyethylene glycol-cellulose acetate (CN-PEG-CA) film was successfully prepared by combining graphitic carbon nitride (g-C 3 N 4 ) photocatalyst with cellulose acetate (CA). The g-C 3 N 4 enables the film with antibacterial activity, as a green photocatalyst. PEG softens the rigid polymer CA and crosslinks CA, PEG, and g-C 3 N 4 together by hydrogen bonding, as a flexible crosslinker. X-ray diffractometer (XRD), scanning electron microscope (SEM), and Fourier transform infrared spectrum (FT-IR) characterizations confirmed the successful preparation of the CN-PEG-CA film. The mechanical property tests demonstrated that adding PEG increased the elongation at break of the film by about 4 times. The composite film had high antibacterial activity, and the bactericidal rates on Escherichia coli and Staphylococcus aureus were 99.98 % and 99.89 %, respectively. It effectively extended the shelf life of strawberries to 96 h and effectively maintained the quality of strawberries during storage. After 96 h, the weight loss rate of strawberries packaged with 15 % CN-PEG-CA film was 21.83 %, vitamin C content was 45.47 %, titratable acidity content was 0.89 %, and color, hardness and total soluble solids were well maintained. And biocompatibility test results showed that the film was safe and nontoxic. From the ecological and economic point of view, the highly flexible and biodegradable films with efficient photocatalytic antibacterial activity synthesized in this paper have great potential in the field of food packaging.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2025
·
IF 13.2
Yue Zhang,Weibiao Wang,Mei Wang,Lijuan Ma,Weiman Zhang,Shuxian Zhang,Gidion Wilson,Zhigang Yang,Yuping Sa,Fen Ma,Xinmin He,Tao Gao,Hui Yuan,Guoning Chen,Xueqin Ma
β-Lactamases (β-LS) are a significant threat to public health due to their role in conferring antibiotic resistance against nearly all clinically used β-lactam antibiotics. Consequently, the search for β-lactamase inhibitors (β-LSI), which can reversibly bind to and inactivate β-LS, has intensified. Here, a sensitive and rapid cellulose-based colorimetric sensor integrated with affinity identification model was designed for high-throughput screening of β-LSI. The innovative concept of a nitrocefin-based colorimetric paper sensor strategy was effective in rapidly detecting the inhibitory effects of herbals on β-LS. Then, potential β-LSI present in the screened herbals were captured, separated, and identified utilizing affinity identification model. The efficacy of the developed method was validated with both negative and positive drugs and was subsequently applied to the screening of β-LSI in 7 different herbal samples. Notably, Ziziphus jujuba Mill. var. spinosa (Bunge) Hu ex H. F. Chou exhibited significant β-LS inhibitory activity. Further affinity separation and LC-MS analyses identified 2 bioactive compounds, spinosin, and magnoflorine, as the agents responsible for this inhibitory effect, with IC 50 values of 143.53 μM and 294.66 μM, respectively. The inhibitory effects and mechanisms were validated through antibacterial activity testing, molecular docking, and dynamic simulation. Notably, spinosin combined with aztreonam showed greater antibacterial effectiveness than avibactam. This study not only establishes a platform for the effective preliminary screening of β-LSI as a potential antimicrobial resistance-reversing agent for future clinical applications, but also inspires the further development of other cellulose-based colorimetric sensors for the rapid and high-throughput discovery of various enzyme inhibitors in complex natural medicines.
✓ 已验证
产品关联
DOI
高影响因子
ChemistrySelect
·
2024
·Vol. 9
·期 40
·e202403878
·
IF 1.9
Haifeng Liao,Jianwei Guo
Graphical Three kinds of heteropoly acid-based ionic liquids with different Hammett acidity were prepared for the catalytic conversion of cellulose to levulinic acid, and the effects of different solvent systems on the catalytic reactions were investigated. The results showed that higher Hammett acidity was beneficial to increase the yield of levulinic acid, and GVL/H 2 O bi-phase solvent system was helpful to extract the product to the organic phase and promote the formation of levulinic acid. Levulinic acid is an important chemical intermediate, which has many applications in organic synthesis, industry, agriculture, and medicine. In this word, three kinds of heteropoly acid based ionic liquids ([IMPS]H 2 PW 12 O 40 、[PyPS] H 2 PW 12 O 40 [TEAPS] H 2 PW 12 O 40) were used to catalyze the one-pot conversion of cellulose to levulinic acid. [IMPS]H 2 PW 12 O 40 has the highest catalytic activity due to its strong Hammett acidity ( H 0 ). In addition, the effect of biphasic solvent systems on the conversion of cellulose to levulinic acid was also studied. The results showed that the GVL/H 2 O system could effectively promote the conversion of cellulose and increase the yield of levulinic acid. The yield of levulinic acid could reach 52.6% and the conversion rate of cellulose was 91.2% at 180 °C for 180 min under the GVL/H 2 O volume ratio of 1:1 with [IMPS]H 2 PW 12 O 40 as a catalyst at 1 Mpa N 2 and cellulose as raw material. And [IMPS]H 2 PW 12 O 40 can be recycled up to five times without significant performance loss. This study provides a promising method for efficiently converting cellulose and other biomass resources to levulinic acid extraction.
✓ 已验证
产品关联
DOI
高影响因子
Advanced Fiber Materials
·
2024
·
IF 17.2
Gao Chong,Liu Yingcun,Gu Zongxue,Li Juan,Sun Yue,Li Wei,Liu Keshuai,Xu Duo,Yu Bin,Xu Weilin
Wearable electronics based on natural biomaterials, such as bacterial cellulose (BC), have shown promise for a variety of healthcare and human-computer interaction applications. However, current BC-based pressure sensors have an inherent limitation, which is the two-dimensional rigid structures and limited compressibility of BC restrict the sensitivity and working range for pressure sensing. Here, we propose a strategy for fabricating BC/polypyrrole/spacer fabric (BPSF) pressure sensors with a hierarchical structure constructed by integrating conductive BC nanonetwork into a compressible fabric frame via the in situ biofermentation process. The hierarchical structure design includes a cross-scale network from the nanoscale BC sensor networks to the macroscopic three-dimensional compressible fabric sensor network, which significantly improves the working range (0–300 kPa) and sensitivity (40.62 kPa −1 ) of BPSF. Via this unique structural design, the sensor also achieves a high fatigue life (~5000 cycles), wearability, and reproducibility even after several washing and abrasion cycles. Furthermore, a flexible and wearable electronic textile featuring an n × n sensing matrix was developed by constructing BPSF arrays, allowing for the precise control of machines and weight distribution analysis. These empirical insights are valuable for the biofabrication and textile structure design of wearable devices toward the realization of highly intuitive human-machine interfaces. Graphical Abstract
✓ 已验证
产品关联
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2025
·
IF 9
Sikai Chen,Jinglin Yuan,Peng Lin,Yi Jin,Han Zhang
Facing the sustainability and potential environmental risk of polyacrylamide (PAM), an both effective and environmentally friendly cationic PAM-grafted cellulose nanofibers (CNFs) flocculant were developed. The preparation was accomplished by grafting acrylamide (AM) and 2-(acryloyloxy)ethyl)trimethylammonium chloride (DAC) from CNF, whereby Cu(0)-mediated reversible deactivation radical polymerization was utilized. Important aspects of the surface-grafted CNFs, including their positive charge concentration and the density and length of the grafted chains, were precisely controlled by adjusting synthesis parameters. The surface-grafted CNFs displayed a microgel structure in water and presented strong positive charge and high viscosity. By flocculation experiments, it was determined that the most effective surface-grafted CNF flocculant was characterized by two key features: spaced grafted chains and higher positive charge content. While flocculation performance was discovered to be most strongly influenced by positive charge, it was observed that longer graft chains could compensate for lower charge levels. Following structural optimization of surface-grafted CNF, most commercial flocculants were outperformed by the surface-grafted CNFs. Effective treatment of actual construction wastewater was also demonstrated, by which broader industrial applications were suggested.
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2024
·
IF 7.7
Jianguo Feng,Yifei Tan,Li Sun,Qianwei Liang,Tianzhen Jiang,Zhen Li
Traditional pesticide formulations have issues such as poor targeting, low adhesion performance, and a tendency to leach into the environment, causing pollution. In this study, a pesticide delivery platform (PRO@FeMOFs@CMC) with a dual response was designed by encapsulating prochloraz technical (PRO) within Fe-based metal–organic frameworks (FeMOFs) and using carboxymethyl cellulose (CMC) as the gatekeeper. The results showed that PRO@FeMOFs@CMC exhibited a loading capacity of 28.86 % for PRO and efficient adhesion to wheat and rice leaves. This delivery platform showed a significant increase in the release of PRO under environments similar to that produced by a pathogen infection, involving cellulase and glutathione (GSH). Importantly, compared to prochloraz suspension concentrate (PRO@SC), PRO@FeMOFs@CMC exhibited higher fungicidal efficacy against Rhizoctonia cereali and Rhizoctonia solani and its acute toxicity to zebrafish and earthworms was reduced by 3.7 times and 8.6 times, respectively. Compared to PRO@SC, the cells treated with PRO@FeMOFs@CMC had higher cell viability and a significantly reduced apoptosis rate, demonstrating greater safety. Additionally, FeMOFs@CMC showed no evident toxicity to wheat and rice. In summary, PRO@FeMOFs@CMC is an efficient and safe pesticide controlled-release system for the sustainable management of wheat and rice diseases.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2024
·
IF 7.7
Wenjing Yang,Shikai Zhang,Chenchen Li,Mei Li,Yijing Li,Peng Wu,Houshen Li,Shiyun Ai
Polysaccharide-based films have received increasing attention as promising candidates for petrochemical plastics. However, they are highly brittle, poorly hydrophobic and without antibacterial activity, while current films used to address these issues often struggle to manage the balance between these properties. To achieve a balance of several performance indices of the films, functionalized dialdehyde cellulose nanocrystals (DCNCs) were prepared to activate pectin-based films. Structural characterization including dynamic light scattering techniques (DLS), scanning electron microscope (SEM), atomic force microscope (AFM), attenuated total reflection Fourier-transform infrared (ATR-FTIR) spectrometer and x-ray diffraction (XRD) demonstrated that DCNCs were homogeneously dispersed in the pectin polysaccharide matrix and tightly cross-linked through hydrogen bonding interactions, which promoted the stable formation of high-performance composite films. Compared to pure pectin film, the composite film has better tensile strength (23.09 MPa), water contact angle (WCA, 91.23°), water vapor permeability (WVP, 1.02 × 10 −12 g/cm·s·Pa), and exhibit excellent UV-resistance, DPPH radical scavenging capacity (27.04 %) and antibacterial activity that significantly extended the shelf life of strawberries (5 d). Furthermore, DCNCs can be used to enhance the mechanical strength (4.15–23.46 MPa), WVP (1.55–5.21 × 10 −12 g/cm·s·Pa) and WCA (59.46°–61.03°) of various polysaccharide-based films, which validates their universality. This work effectively improves and balances the several properties of polysaccharide-based films, creating more opportunities for the wide application of polysaccharide-based films, such as food preservation packaging.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2024
·
IF 7.7
Fang Fang,Zhaoyizhu Guan,Yongjian Cai,Lihua Huang,Zijing Tian,Jianhui Wang
In this work, cellulose nanofiber/epigallocatechin gallate (CNF/EGCG) complexes at different ratio were fabricated and the effects on characteristics and stability of emulsions under different oil phase fraction (φ) were investigated. The results of functional groups indicated the formation of CNF/EGCG complexes via hydrogen bond interaction, leading to enhanced antioxidant activity as the proportion of EGCG increased. The complexes exhibited more fragments but pure CNF were more homogenously dispersed in the aqueous phase. Enhancing the EGCG content reduced the droplet size of emulsions firstly before increased, while the apparent viscosity and viscoelastic properties displayed a contrary trend. Emulsion gels with smaller droplet size, higher apparent viscosity, excellent viscoelastic properties and physical stability could be formed at φ = 0.5 while emulsions at φ = 0.3 exhibited slight creaming. The emulsions at lower CNF/EGCG ratio presented better oxidative stability, which was ascribed to the higher antioxidant activity of the complexes and the thicker interfacial film. Results suggest that EGCG could be combined with CNF to improve the emulsion performance and be applied in extending the shelf-life of the emulsion-based products.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Applied Nano Materials
·
2024
·
IF 5.3
Yuyan Zhou,Guiyun Huang,Zhe Zhang,Liling Qin,Hui Cai,Jiulong Sha
Because of the increasing popularity of self-powered devices that use environmental or mechanical energy harvesting, triboelectric nanogenerators (TENGs) can be used as power sources in wearable electronic devices. However, the preparation of stretchable and flexible TENGs with outstanding electrical output performance is a challenge that requires further investigation. In this study, multiwalled carbon nanotubes (MWCNTs)/cellulose nanofibrils (CNFs)/poly(vinyl alcohol) (PVA) hydrogel-based TENGs that are stretchable, antifreezing, and highly conductive were developed. Doping of multiwalled carbon nanotubes and cellulose nanofibrils promotes the cross-linking of the hydrogel and the formation of microchannels within it, which not only improves ion transport to enhance hydrogel conductivity but also increases the triboelectric output through streaming potential. As the hydrogel is compressed, 2% MWCNTs hydrogel-based TENGs would generate an open-circuit voltage of 160 V in contact-separation mode and an induced voltage of 6.1 V was obtained via the streaming potential mechanism. A wearable sensor for motion detection was also developed using TENGs with outstanding stretchability and flexible performance. Because of their high sensitivity and effective mechanical energy-harvesting capabilities, ionic hydrogels hold promise for the development of next-generation, advanced wearable electronic devices.
✓ 已验证
产品关联
DOI
高影响因子
BIOMASS & BIOENERGY
·
2025
·
IF 5.8
Liyi Zhang,Guangyong Zeng,Jianquan Luo,Yinhua Wan,Benkun Qi
While the mechanism for extracting lignin from biomass using deep eutectic solvent (DES) pretreatment has been widely investigated, few studies have specifically identified the grafting of hydrogen bond donors from DES onto the lignin surface during pretreatment and examined the effect of lignin modification on enzymatic cellulose hydrolysis. This study combines choline chloride (CC) with lactic acid (LA), oxalic acid (OA) and glycerol (Gly) to treat lignin. Structural characterization confirmed the incorporation of LA and OA via esterification, and Gly via etherification, onto lignin surface. Enzymatic hydrolysis results indicated that CC-OA-treated lignin strongly inhibited hydrolysis, with glucose yields ranging from ∼30 % to ∼46 %. In contrast, CC-LA- and CC-Gly-treated lignin exhibited weaker inhibition, with glucose yields varying from ∼50 % to ∼59 % for the former and ∼47 %–∼60 % for the latter, compared to untreated lignin with glucose yields of 51.25 % and 38.95% at two loadings. Notably, a CC-Gly-treated lignin, with lower loading, resulted in glucose yields ranging from 57.02 % to 60.22 %, showing no inhibition on cellulose hydrolysis compared to the control without lignin addition (57.87 %). Physicochemical analyses revealed variations in water contact angle, surface charge, and total phenolic hydroxyl content among DES-treated lignin samples, affecting cellulase-lignin interactions—specifically hydrophobic, electrostatic, and hydrogen bonding. This study clarifies the relationship between DES composition, lignin modification, and enzymatic cellulose hydrolysis efficiency, providing valuable insights into the effects of DES-induced lignin modifications on cellulose saccharification and addressing a significant gap in the literature.
✓ 已验证
产品关联
DOI
高影响因子
CARBOHYDRATE POLYMERS
·
2025
·
IF 12.5
Liucheng Meng,Zifei Yan,Wen Deng,YanLing Lou,Lei Zhang,Zhaoyang Xu,Huining Xiao,Weibing Wu
The potential environmental and health hazards of packaging materials based on petrochemical polymers have prompted a shift in research toward biodegradable polymers. However, most biodegradable films have poor water vapor barrier properties. We proposed an environmentally friendly method based on salting-out and cyclic freezing-thawing effects to improve the water-resistance and water vapor barrier properties of carboxymethyl cellulose (CMC)-based films. The coexistence of hydroxyl ( OH) and carboxyl ( COOH) was found to be crucial in promoting the ice-induced crystallization of cellulose molecules. The calculations of ice crystal size and freezable water weight content as well as hydrogen bonding theory analysis proved that the COOH can enhance the polymer interactions and crystallization to resist water molecules. The water vapor permeability (WVP) is as low as 3.89 × 10 −11 g·m/m 2 ·Pa·s at 37 °C and 65 % RH, a 6-fold reduction compared to the untreated CMC film. Meanwhile, the CMC-based films have high water resistance and mechanical strength, with a maximum wet tensile strength of 14.96 MPa, and remain intact after two months of immersion in water. This strategy is of great significance for the development of sustainable packaging materials with high barrier properties.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2025
·
IF 8.5
Jinze Wang,Zhaoji Dong,Jiatian Li,Jiarui Lu,Sicong Tan,Qian Feng,Zhaoyang Xu
Graphene exhibits exceptional electrical properties, and aerogels made from it demonstrate high sensitivity when used in sensors. However, traditional graphene aerogels have poor biocompatibility and sustainability, posing potential environmental and health risks. Moreover, the stacking of their internal structures results in low compressive strength and fatigue resistance, which limits their further applications. In this study, green and sustainable cellulose nanofibers/sodium alginate/reduced graphene oxide aerogels (BCSRA) were synthesized, featuring a well-defined lamellar structure and a fiber cross-linked network, employing techniques such as bidirectional freeze-drying, ionic cross-linking, and thermal annealing. The unique internal architecture of BCSRA results in a compressive strength of up to 64.55 kPa at 70 % compression deformation and an extremely low density of merely 7.21 mg/cm 3 . Furthermore, BCSRA displays outstanding fatigue resistance, maintaining 82.17 % of its stress after 100 compression cycles at 70 % compressive strain and 86.99 % after 1000 cycles at 50 % compressive strain. Remarkably, when utilized as a flexible pressure sensor, BCSRA achieves a sensitivity of 5.71 kPa −1 and endures over 2200 cycles at 40 % compression, all while ensuring consistent electrical signal output. These properties underscore its significant potential for application in wearable flexible pressure sensors, capable of detecting various human movements.
✓ 已验证
产品关联
DOI
PubMed
高影响因子