IONICS
·
2020
·Vol. 27
·期 2
·721-728
·
IF 2.394
Hu Siqi,Liu Yang,Peng Xianhui,Li Mian,Zhang Chengxu,Dong Peng,Sui Yudong,Han Lina,Zhang Yingjie
The exploration of cheap, stable, and highly efficient non-precious metal catalyst is conducive to extending the practical applications of zinc-air batteries (ZABs). Herein, a simple, environmental friendly and low-cost method was proposed to fabricate nitrogen-doped carbon–coated TiN nanoparticle composites (TiN@NC). Dicyandiamide was applied as the nitrogen source instead of ammonia reduction, based on which Ti 0.95 Co 0.05 N@NC was synthesized. Oxygen reduction reaction (ORR) measurement shows that the onset potential of Ti 0.95 Co 0.05 N@NC was 30 mV higher compared to TiN@NC, which is attributed: (i) Cobalt was doped into TiN lattice. (ii) After cobalt doping, the graphitization degree of carbon was increased to facilitate electron transport. (iii) Controlling the reservation of nitrogen to form more N-C active sites in Ti 0.95 Co 0.05 N@NC may further promote the performance of ORR. The performance of the ZABs was effectively improved after cobalt doping. It is believed to make it more convenient to prepare binary transition metal nitride nanostructures.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED MICROBIOLOGY AND BIOTECHNOLOGY
·
2020
·Vol. 104
·期 23
·10005-10018
·
IF 3.53
Guo Xiaolei,Wu Weibin,Zhang Mingliang,Wu Licheng,Huang Jianzhong
Abstract l -Tyrosine is a versatile compound used in the fine chemical, pharmaceutical, and functional food industries. Here, we report a bi-enzymatic cascade involving alanine racemase (ALR) and d -amino acid oxidase (DAAO) to produce pyruvate, as co-substrate for l -tyrosine production, from the cheap substrate l -alanine. The BpALR (ALR from Bacillus pseudofirmus ) was used as a whole-cell biocatalyst, converting l -alanine to d , l -alanine. The FsDAAO (DAAO from Fusarium solani ) was immobilized to oxidize the d -alanine generated in the first step to pyruvate. Both systems were combined as a continuous-flow reactor for maximized l -alanine-to-pyruvate conversion rates. The optimal parameters and appropriate conditions for FsDAAO immobilization were investigated. The pyruvate concentration of 86.6 g/L was achieved within 17 h. Subsequently, a whole-cell biocatalyst system for l -tyrosine production, catalyzed by the tyrosine phenol-lyase (TPL) from Erwinia herbicola (EhTPL), was developed, and a fed-batch approach was applied with phenol and the pyruvate produced with the ALR/DAAO system mentioned above. The concentration of phenol and pyruvate in the reactor should not exceed 7.5 g/L and 10 g/L, respectively. Significantly, the l -tyrosine concentration of 152.5 g/L was achieved within 10 h, demonstrating the great potential for high-efficiency production of l -tyrosine through the approach we established in this paper. Graphical abstract Key points • A specific bioreactor system for pyruvate produced from l -alanine was developed • The appropriate condition for immobilization of FsDAAO was investigated • A fed-batch process was established to produce l -tyrosine with recombinant E. coli • The bi-enzymatic cascade was successfully used for l -tyrosine production at low cost
✓ 已验证
产品关联
DOI
PubMed
高影响因子
AMINO ACIDS
·
2020
·Vol. 52
·期 11
·1479-1489
·
IF 3.063
Yang Sheng-Yuan,Liu Shu-Min,Wu Yan-Yan,Lin Qian,Liang Gui-Lian,Liu Jiao-Fen,Liang Zi-Zhan,Liang Jia-Rong
Glutamate decarboxylase (GAD, EC 4.1.1.15) is an important enzyme in gamma-aminobutyric acid biosynthesis and DL -glutamic acid resolution. In this study, the Enterococcus faecium -derived GAD was successfully immobilized by regenerated chitin (RC) via specific adsorption of cellulose-binding domain (CBD). The optimal binding buffer was 20 mmol/L phosphate buffer saline (pH 8.0), and the RC binding capacity was 1.77 ± 0.11 mg cbd-gad /g rc under this condition. The ratio of wet RC and crude enzyme solution used for immobilization was recommended to 3:50 (g/mL). To evaluate the effect of RC immobilization on GAD, properties of the immobilize GAD (RC-CBD-GAD) were investigated. Results indicated RC-CBD-GAD was relatively stable at pH 4.4–5.6 and temperature − 20–40 °C, and the optimal reaction pH value and temperature were pH 4.8 and 50 °C, respectively. When it was reacted with 5 mmol/L of follow chemical reagents respectively, the activity of RC-CBD-GAD was hardly affected by EDTA, KCl, and NaCl, and significantly inactivated by AgNO 3 , MnSO 4 , MgSO 4 , CuSO 4 , ZnSO 4 , FeCl 2 , FeCl 3 , AlCl 3 , CaCl 2, and Pb(CH 3 COO) 2 . The apparent K m and V max were 28.35 mmol/L and 147.06 μmol/(g RC-CBD-GAD ·min), respectively. The optimum time for a batch of catalytic reaction without exogenous pH control was 2 h. Under this reaction time, RC-CBD-GAD had a good reusability with a half-life of 23 cycles, indicating that it was very attractive for GABA industry. As a novel, efficient, and green CBD binding carrier, RC provides an alternative way to protein immobilization.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
KOREAN JOURNAL OF CHEMICAL ENGINEERING
·
2020
·Vol. 37
·期 10
·1751-1760
·
IF 2.69
Yin Xiangying,He Yi,Wang Yuqi,Yu Hao,Chen Jingyu,Gao Yixuan
Membrane fouling is usually a troublesome issue in oily water treatment, especially containing complex crude oil emulsions. Although most of the reported membranes are in a position to repel models oils, it’s still a big challenge of repelling crude oil. Besides, the fabrication processes of those membranes are too complicated, high-cost and environmentally unfriendly. Hence, in this work, a facile and green method was designed to fabricate a Cellulose nanofiber (CNF) polyelectrolyte filtration membrane with excellent underwater superoleophobic characteristic and outstanding antifouling performance. The membrane not only can separate oil/water emulsions with a high separation efficiency (>99%) and water flux (>11,000 L m −2 h −1 ), but also remove positively charged dyes with good permeation fluxes (>10,000L m −2 h −1 ) and rejection radio (>98%). Herein, it can be anticipated that this method has excellent potential for designing and preparing the specific membranes for multifunctional applications in water treatment.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF POLYMERS AND THE ENVIRONMENT
·
2020
·Vol. 29
·期 3
·829-836
·
IF 2.572
Feng Libang,He Xia,Zhang Yunpeng,Qu Dongan,Chai Changsheng
Abstract Cracks in polymers can be healed by endowing materials with self-healing performance. Cracks in epoxy resins containing thermo-reversible Diels–Alder bonds (EP-DA) can be self-healed via different heat treatments. However, EP-DA exhibits the disadvantages of brittleness and poor impact resistance yet as that existed in the common epoxy resins, and which limits the application of thermo-reversible self-healing epoxy resins. Herein, thermoplastic polyurethane (TPU) was introduced into EP-DA for the purpose of reducing the brittleness and improving the impact resistance of EP-DA. Meanwhile, it was expected that the self-healing performance of EP-DA could not be affected evidently. Results showed that the impact resistance of EP-DA had been improved greatly as expected upon TPU modification. More importantly, instead of affecting the self-healing performance of EP-DA, the self-healing speed of EP-DA was accelerated evidently by the incorporation of TPU. On the other hand, the healing efficiency of EP-DA was also enhanced markedly. In fact, TPU-modified EP-DA was repaired by dual actions of thermo-reversible DA reaction and thermal movement of thermoplastic polymer chains. In addition, TPU-modified EP-DA could also be healed for many damage-repair cycles. Therefore, thermoplastic polyurethane played a triple role as toughening, accelerating and enhancing self-healing performance of thermo-reversible epoxy resins. Graphic Abstract Thermoplastic polyurethane (TPU) was introduced into thermo-reversible self-healing epoxy resins (EP-DA) successfully. As a result, the brittleness was reduced and the impact resistance of EP-DA was improved greatly. What’s more, instead of affecting the self-healing performance of EP-DA, the self-healing speed of EP-DA was accelerated evidently while the self-healing efficiency of EP-DA was enhanced markedly. Therefore, TPU played a triple role as toughening, accelerating and enhancing self-healing performance of thermo-reversible epoxy resins.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF POLYMERS AND THE ENVIRONMENT
·
2020
·Vol. 29
·期 3
·745-754
·
IF 2.572
Hu Yinghan,Guo Qing,Liu Peiwen,Zhu Ruonan,Lu Fachuang,Ramaswamy Shri,Wu Yuying,Xu Feng,Zhang Xueming
Aimed at decreasing the environmental pollution caused by petroleum-derived packing materials, many efforts have been directed towards fabricating biodegradable substitutes, especially of cellulose-based film with functional properties. In this paper, a totally plant-derived antibacterial film was successfully prepared. Regenerated cellulose films were used as substrate and poacic acid, a decarboxylated product from 8–5-diferulic acid, as fungicides. The physical properties and thermal stability of the prepared plant-derived antibacterial films were characterized, and the antibacterial activity was also assessed as the function poacic acid contents. The morphology showed that the cellulose/poacic acid films exhibited a homogeneous and smooth surface and poacic acid was successfully incorporated into cellulose films as revealed by Fourier-transform infrared (FT-IR) spectroscopy and fluorescent microscopy. It was noted that both the tensile strength and thermal stability of the antibacterial films decreased due to the incorporation of the poacic acid. Remarkably, the prepared cellulose/poacic acid films exhibited superior antibacterial activity against Staphylococcus aureus . The notable properties of the cellulose/poacic acid films are promising for applications in food and medical packaging to enhance their safety.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE
·
2020
·Vol. 56
·期 3
·2176-2191
·
IF 3.553
Li Jun,Zhu Xiaoyun,Wang Huichang,Lin Pengcheng,Jia Lisi,Li Longjian,Chen Ying
Abstract Microencapsulated phase change materials (MEPCMs) have been widely used in many fields as thermal energy storage materials. This study reported a novel MEPCM with the functions of thermal energy storage, photothermal conversion, ultraviolet (UV) shielding, and superhydrophobicity, which was particularly suitable for intelligent textiles. The microcapsules based on an n -eicosane core and a CuO-doped polyurea shell with hierarchical structure were fabricated through a one-step interfacial polymerization. The morphology of the capsules and the hierarchical shell structure were identified through scanning and transmission electron microscopy. Thermal analysis indicated that the microcapsules had a high latent heat of 162.3 J/g and demonstrated a high thermal reliability. These microcapsules achieved a good photothermal conversion capability and can reduce UV radiation by approximately 30%. The water contact angle of the MEPCM was over 148° and showed a good superhydrophobic property. Cotton fabric coated with the prepared MEPCM was investigated. Results showed that it achieved a high phase change enthalpy of 36.8 J/g, an effective thermoregulation capability, and a large contact angle of 141.6°. Graphic abstract
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF SOLUTION CHEMISTRY
·
2020
·Vol. 49
·期 11
·1402-1418
·
IF 1.273
Chen Tingting,Feng Xiao,Yin Yuqiao,Xu Yingjie
Densities, speeds of sound, and viscosities of binary mixtures of methyl benzoate (MB) with ethanol, 1-propanol, and 1-butanol were measured at temperature ranging from T = 293.2 to 313.2 K and refractive indices were determined at T = 303.2 K. Excess molar volumes, V E , isentropic compressibility deviations ∆ κ s and viscosity deviations, Δ η , were obtained and fitted with the Redlich–Kister equation with satisfactory results. Based on the measured and derived physicochemical properties, the influence of the alkyl chain length of the alcohol on the molecular interactions of the studied mixtures was explored. The results show that both hydrogen bond interaction between carbonyl group of MB and hydroxyl group of alcohol and the packing efficiency, such as accommodation of alcohol in the interstice of MB, play an important role in the microstructure of the mixtures, which leads to the disruption of alcohol with the addition of MB. Moreover, by comparing V E , ∆ κ s and Δ η values of MB (1) + alcohol (2) systems at T = 303.2 K, it is found that the strength of hydrogen bond interaction and the packing efficiency significantly weakens with increasing alkyl chain length of alcohol in going from ethanol to 1-butanol, resulting in the V E values of the studied systems gradually changing from a negative deviation to an S shape, the ∆ κ s and Δ η values have negative deviations, and the ∆ n D values have positive deviations. The obtained results will provide thermodynamic guidance for the industrial purification of methyl benzoate.
✓ 已验证
产品关联
DOI
高影响因子
MICROCHIMICA ACTA
·
2020
·Vol. 187
·期 11
·1-10
·
IF 6.232
Chen Wenqin,Li Jia,Wei Xiaotong,Fan Yunpeng,Qian Husun,Li Siqiao,Xiang Yu,Ding Shijia
Based on the hydrogel-AuNP supramolecular sphere (H-Au), a label-free and real-time surface plasmon resonance imaging biosensor has been developed for highly sensitive and specific determination of prostate cancer cell-derived exosomes. After integrating the signal amplification effect of the mass cumulative hydrogel and the LSPR effect of AuNPs with high specific aptamer, the SPRi biosensor for exosome detection exhibited a wide linear range from 1.00 × 10 5 to 1.00 × 10 7 particles/mL with a limit of detection of 1.00 × 10 5 particles/mL. Most importantly, with a strong correlation between the SPRi signal and the t-PSA value measured by the clinical chemiluminescence immunoassay, this biosensor displayed excellent practicability for human serum analysis, which exhibits great potential applications in disease diagnosis and bioanalysis. Graphical abstract
Prostate cancer has been one of the most threatening diseases in human life and health nowadays. In particular, as cancer metastasizes, it is more likely to cause fracture, paraplegia, and even fatal consequences. However, the predominant t-PSA test needs further improvement for the deficiencies of limited specificity and sensitivity, which is prone to false positive. As one of the noninvasive markers of liquid biopsies, exosome has the potential to be a substitute for t-PSA, which can provide specific and predictive information in disease diagnosis and prognosis. Herein, based on the hydrogel-AuNP supramolecular sphere (H-Au), a label-free and real-time surface plasmon resonance biosensor has been developed for highly sensitive and specific detection of prostate cancer cell-derived exosomes. After integrating the signal amplification effect of mass cumulative hydrogel and LSPR effect of AuNPs with high specific aptamer, this developed SPRi biosensor for exosome detection exhibited a wide linear range from 1.00 × 10 5 to 1.00 × 10 7 particles/mL with a limit of detection down to 1.00 × 10 5 particles/mL. Most importantly, with a strong correlation between the SPRi signal and the t-PSA value measured by the clinical chemiluminescence immunoassay, this biosensor displayed excellent practicability in human serum, which exhibited great potential applications in disease diagnosis and bioanalysis.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
FIBERS AND POLYMERS
·
2020
·Vol. 21
·期 8
·1649-1656
·
IF 1.797
Hou Delong,Wang Songhang,Chang Jinming,Xu Zhou,Zeng Qi,Wang Zhonghui,Yang Yongcheng,Yan Jun,Chen Yi
Plasticizers that enable flexible polyvinyl chloride (PVC) are usually combustible, restricting the application of PVC in fire-prone scenarios. In this context, intrinsically flame-retardant plasticizers displaying dual function continue to be the focus of intensive research. Despite their efficiency, the majority of these dual-functional plasticizers previously reported contain halogen elements, which, once ignited, emanate toxic and potentially carcinogenic substances, along with toxic gases and smoke, polluting the environment, damaging the biota, and threatening human health. Here, we report a strategy to obtain a halogen-free, intrinsically flame-retardant PVC bio-plasticizer that harnesses the phenolic hydroxyl of naturally occurring cardanol and covalent attachment of an organophosphate moiety. When combined with di-(2-ethylhexyl) phthalate (DOP), the organophosphate-containing cardanol is qualified as a co-plasticizer, while endowing the PVC materials with flame retardancy. Unlike inorganic flame-retardants, the engineered cardanol is compatible with PVC such that the mechanical properties of the PVC materials are not compromised. The rationale underlying the present effort may provide guidance for developing sustainable alternatives to halogen-containing plasticizers to address the sustainability challenge now confronting PVC industry.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2020
·Vol. 31
·期 20
·17688-17702
·
IF 2.22
Liu Jun,Hui Qian,Chang Meng-Jie,Cui Wen-Na,Xi Tong,Wang Lin-Da,Sun Meng,Yuan Bin,Ni Fu-Rong
Herein, novel fibrous Bi 4 Ti 3 O 12 /Bi 2 S 3 /MoS 2 is constructed by a simple one-step methodology for photocatalytic degradation of RhB dyes. Bi 4 Ti 3 O 12 /Bi 2 S 3 /MoS 2 hybrid fibers were facilely prepared by direct hydrothermal growth of MoS 2 nanosheets on electrospun Bi 4 Ti 3 O 12 nanofiber surface, during which rod-like Bi 2 S 3 was formed by in-situ ion exchange reaction between BTO and S source. The MoS 2 nanosheets with several-layer thickness uniformly are coated both on the BTO and Bi 2 S 3 surface. Remarkable enhancement of visible light absorption and photo-generated charge separation in Bi 4 Ti 3 O 12 /Bi 2 S 3 /MoS 2 are achieved compared with the bare BTO nanofibers. By changing the weight ratio of Mo/S and the precursor dosage of MoS 2 , the optimized BM-150/250 sample presents 2.3 and 4.1 times higher of the photodegradation efficiency and apparent reaction rate constant, respectively, than that of pure BTO fibers after 120-min irradiation under visible light. The system pays an efficient pathway to establish ternary composite fibers providing high photocatalytic activity for other electrospun Bi-contained nanofibers.
✓ 已验证
产品关联
DOI
高影响因子
Science China-Chemistry
·
2020
·Vol. 63
·期 12
·1777-1784
·
IF 6.356
Ma Xiaoshuang,Ma Guanyu,Qin Lubing,Chen Guangxu,Chen Shaowei,Tang Zhenghua
Despite the recent progress on controllable synthesis of alkynyl-protected Au nanoclusters, the effective synthetic means are very limited and the cluster formation process still remains puzzling. Here, we develop a novel synchronous nucleation and passivation strategy to fabricate Au 36 (PA) 24 (PA=phenylacetylenyl) nanoclusters with high yield. In Au 36 (PA) 24 formation process, Au 22 (PA) 18 as key intermediate was identified. Meanwhile, Au 22 (PA) 18 can be synthesized under a low amount of reductant, and by employing more reductants, Au 22 (PA) 18 can turn into Au 36 (PA) 24 eventually. Moreover, the structure evolution from Au 22 (PA) 18 to Au 36 (PA) 24 is proposed, where four Au 13 cuboctahedra can yield one Au 28 kernel. Finally, the ratiocination is verified by the good accordance between the predicted intermediate/product ratio and the experimental value. This study not only offers a novel synthetic strategy, but also sheds light on understanding the structural evolution process of alkynyl-protected Au nanoclusters at atomic level.
✓ 已验证
产品关联
DOI
高影响因子