Materials Today Chemistry
·
2026
·
IF 7.4
Yangyang Ren,Zehao Zang,Hua Ning,Guichao Zhang,Lanlan Li,Xiaojing Yang,Zunming Lu,Xinghua Zhang,Xiaofei Yu
Highly graphitic carbon-supported Pt particles (Pt/Co–N–C) was developed. • Regulating the electronic structure of Pt through the strong metal-support interaction. • Intrinsic activity was increased by optimizing O 2 adsorption and lowering energy barrier. • High mass activity and excellent stability of Pt/Co–N–C were achieved. Developing durable supported Pt-based materials is essential for advancing the oxygen reduction reaction in fuel cells, as harsh electrocatalytic conditions often trigger corrosion of carbon supports. The support materials’ physical and chemical properties play a crucial role in the overall performance of Pt-based catalysts. Herein, a highly stable electrocatalyst (Pt/Co–N–C) consisting of small Pt particles coupled tightly with highly graphitized Co–N–C substrate for efficient catalysis was proposed. Pt/Co–N–C exhibited a remarkable mass activity in acidic media, 6.4 times higher than that of commercial Pt/C. Notably, Pt/Co–N–C displayed exceptional stability, with only a 3 mV decrease in half-wave potential and retaining 95.8% mass activity even after 50,000 potential cycles during the accelerated durability tests. Experimental and theoretical analysis highlighted the enhanced support-catalyst and electronic effects between Pt and Co–N–C matrix, thereby enhancing the mass transfer and preventing the structural degradation of the electrocatalyst. This work underscored the possibility of simultaneously modifying Pt active sites and carbon support as effective electrode catalysts in fuel cells. Download: Download high-res image (307KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
Functional Materials Letters
·
2019
·
IF 1.388
Lin Zhao,Yanzhao Xie,Qiuyu Lin,Rongze Zheng,Yong Diao
A series of composite catalysts of C, N and P co-doped TiO 2 were prepared by sol-gel method, using a biomass (soluble starch) dopant. The samples were characterized by field emission scanning electron microscopy (FESEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), UV-Vis diffuse reflectance spectroscopy (DRS), fourier transform infrared (FTIR) spectroscopy. The results show that TiO 2 is co-doped with C, N and P by one step. The resulting composite exhibited higher specific surface area, wider visible-light absorption band with respect to the pure TiO 2 . The sample calcined at 400 ∘ C for 2 h with a doping amount of 6 g soluble starch showed the best electrochemical performance. The C, N and P co-doped TiO 2 was also used for the degradation of methylene blue (MB) and degradation ratio was up to 98% in 80 min under visible light irradiation.
✓ 已验证
DOI
高影响因子
PHOSPHORUS SULFUR AND SILICON AND THE RELATED ELEMENTS
·
2022
·
IF 1.052
Fengce Mei,Chong Tian,Hubo Li,Shan Huang,Qing Yu,Yuxi Han,Zhongwei Wang
A phosphorous-nitrogen flame retardant 1-N,4-N-bis(diphenylphosphorylmethyl)benzene-1,4-diamine (DPO-N) was synthesized by the reaction of p-phenylenediamine, formaldehyde and diphenylphosphine oxide (DPO). The modified epoxy resin (EP) was prepared using DPO-N as a flame retardant and co-curing agent in the presence of 4,4’-diaminodiphenylsulfone to cure bisphenol A diglycidyl ether (DGEBA). The flame retardancy of the DPO-N-modified EP was evaluated by the limiting oxygen index (LOI), vertical burning test (UL-94) and cone calorimeter test. The results showed that the EP/DPO-N-0.7 (DPO-N-modified EP at a phosphorus content of 0.7 wt.%) passed the UL-94 V-0 rating test, and the LOI value of the sample increased to 30.4%. The peak of the heat release rate (pk-HRR), average of the heat release rate (av-HRR) and average of the effective heat of combustion (av-EHC) of the modified EPs were reduced by 32.4, 27.4 and 28.4%, respectively. The flame retardant mechanism was investigated by scanning electron microscopy, pyrolysis/gas chromatography-mass spectrometry and Fourier transform infrared spectroscopy analyses. The results demonstrated that DPO-N exerted its flame-retardant effect through the barrier effect of the condensed phase and the quenching effect of the gas phase. Furthermore, the water resistance of the EP was enhanced with the incorporation of DPO-N.
✓ 已验证
DOI
高影响因子
INTERNATIONAL JOURNAL OF POLYMER ANALYSIS AND CHARACTERIZATION
·
2019
·
IF 1.426
Jianglong Duan,Zhihua Zhou,Tianlong Huang,Wenjuan Liu,Yanmin Zhao,Wei Wu,Xiaofei Li,Jianjun Fang
Three-dimensional biodegradable porous scaffolds play an important role in tissue engineering. The degradable scaffold material, based on 1,4-butanediamine-modified poly(lactide-co-glycolide) (BMPLGA), nano-bioactive glass (NBAG), and nano-β-tricalciumphosphate (β-TCP), was prepared by a solution-casting/salt-leaching method. The biological properties were studied by using cell cytotoxicity, von Kossa staining, alkaline phosphatase activity, hemolytic test, acute toxicity, and genetic toxicity test. The MTT results indicated that the BMPLGA/NBAG-β-TCP materials did not show any cytotoxicity. The result of von Kossa staining showed that the introduction of the NBAG and β-TCP promoted fibroblastic differentiation and improved the mineral deposition of the BMPLGA matrix. In addition, the presence of NBAG and β-TCP in the composite further enhanced the ALP activity in comparison with the sole BMPLGA material. The hemolytic potential showed that the nanocomposite scaffolds were non-hemolytic. The BMPLGA/NBAG-β-TCP scaffolds showed no acute systemic toxicity or mutagenic action. Therefore, the results indicated the BMPLGA/NBAG-β-TCP nanocomposite scaffold could be considered as a potential bone tissue engineering implant.
✓ 已验证
DOI
高影响因子
International Journal of Electrochemical Science
·
2023
·Vol. 6
·期 10
·4700-4713
·
IF 1.5
Lingli Wan,Yonghai Song,Haozhi Zhu,Yu Wang,Li Wang
Cytochrome c (Cyt c ) and horseradish peroxidase (HRP) were co-immobilized on graphene oxide (GO)-chitosan (CHIT) modified Au electrode and the electron-transfer between the two proteins was investigated. The GO-CHIT nanocomposite was assembled on an Au electrode which covered by a mixed self-assembled monolayer of mecraptoundecanoic acid (MUA) and 6-mercapto-1-hexanol (MCH) and coated with Cyt c . The GO-CHIT nanocomposite as a novel electrochemical platform designed by combining the biocompatibility of CHIT and the conductivity of GO was used for the immobilization of the redox enzymes. Based on electrostatic interactions, the Cyt c -HRP/GO-CHIT/Cyt c /MUA-MCH/Au electrode was constructed by a layer-by-layer technique. Electron transfer and electrocatalytic performances of the modified electrode were investigated. Results showed that direct electron transfer has been established for the bi-protein system and the average rate constant of electron transfer k s , (Cyt c - HRP) =2.63 s -1 was larger than those values at the electrodes modified with single protein (k s , (Cyt c ) =1.44 s -1 , ks, (HRP) =1.53 s-1). The bi-protein modified electrode exhibited good electrocatalytic response to reduction of oxygen (O 2 ) and hydrogen peroxide (H 2 O 2 ), suggesting that a third-generation biosensor could be obtained for the detection of O 2 and H 2 O 2 .
✓ 已验证
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE
·
2026
·
IF 4.4
Cheng Li-Qian,Gong Yi,Chen Kai,Hao Xuxia,Jiang Min,Dai Yu,Xie Xinyuan
LiMn 0.8 Fe 0.2 PO 4 (LMFP) cathode has emerged as a promising candidate for high-energy–density lithium-ion batteries due to its cost-effectiveness, high voltage plateau and intrinsic safety. However, drawbacks such as low electrical conductivity, Jahn–Teller effect and Mn 2+ dissolution severely limit its application potential. Herein, we propose a strategy that couples B-F co-doping with HAP@PP separator modification to simultaneously boost the conductivity of LMFP and mitigate Mn 2+ leaching using a facile solid-phase method. The optimized LiMn 0.8 Fe 0.2 P 0.99 B 0.01 O 3.97 F 0.03 (LMFP-BF1) exhibits superior rate capability and excellent cycle stability, which delivers a discharge capacity of 137.4 mAh g −1 and retains 92.6% of that capacity at 1C after 300 cycles. Moreover, HAP@PP separator exhibits an excellent manganese capture effect, which reduces the precipitation of manganese content from 134.647 to 14.056 mg kg −1 . The LMFP-BF1|HAP@PP cell remains a discharge capacity of 140.6 mAh g −1 at 0.5–45 ℃ after 100 cycles, with a capacity retention rate of 88.31%. This study offers insights into integrating ion doping and separator modification for phosphate-based high-energy–density lithium-ion batteries. Graphical abstract B-F co-doping and modified HAP@PP separator can simultaneously boost the conductivity of LMFP and mitigate Mn 2+ leaching, delivering superior cycling stability.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Lu Zhang,Huan Shen,Boheng Liu,Tingting Liu,Yun Mei,Bin Li,Yang Liu,Gang Cao,Shuo Yu
Hepatic fibrosis, primarily driven by the sustained activation of hepatic stellate cells (HSCs), continues to pose a significant global health challenge due to the scarcity of effective therapeutic interventions. Existing single-target approaches are inadequate in addressing the complex multicellular regulatory network within the fibrotic niche, where injured hepatocytes, Kupffer cells (KCs), and capillarized liver sinusoidal endothelial cells (LSECs) collectively perpetuate HSC activation through paracrine signaling mechanisms. To address this challenge, a novel nanoplatform has been developed, comprising a co -delivery system of quercetin (Que) and simvastatin (Sim) within a mesoporous polydopamine (MPDA)-based matrix, designed to achieve the synchronized modulation of multicellular interactions. The MPDA carrier possesses intrinsic liver-targeting and reactive oxygen species (ROS)-scavenging properties, facilitating preferential accumulation in fibrotic lesions and the mitigation of oxidative stress originating from hepatocytes and KCs. In the acidic fibrotic environment, Que and Sim are sustained within the system due to the acid-responsive properties of MPDA. The released Que reprograms pro-inflammatory M1 macrophages into anti-inflammatory M2 phenotypes, while Sim reverses LSEC capillarization, collectively disrupting the microenvironmental factors driving HSC activation. Moreover, all components—MPDA, Que, and Sim—can directly inhibit HSC activation through complementary pathways. This multi-target strategy resulted in a more significant reduction in collagen deposition compared to monotherapies in preclinical models, alongside a notable restoration of liver function. By integrating microenvironmental reprogramming with the interception of multicellular networks, our study establishes a paradigm-shifting nanotherapeutic approach for reversing fibrosis and underscores the potential of engineered multidrug coordination in treating complex stromal diseases.
✓ 已验证
产品关联
DOI
高影响因子
MARINE ENVIRONMENTAL RESEARCH
·
2026
·
IF 3.4
Yurou Jiang,Wangxinze Shu,Jiyuan Wan,Jinke Yan,Qian Liu,Yong Jiang
Dimethylsulfoniopropionate (DMSP) is a key organic sulfur compound in marine food webs and the main precursor of the climate-active gas dimethyl sulfide (DMS), yet its water-column cycling under the joint influence of emerging pollutants remains poorly constrained. A 19-day microcosm experiment was conducted to examine the long-term effects of single and combined exposure to nanoplastics (NPs) and the antibiotic ofloxacin on planktonic microbial communities and DMSP cycling in coastal seawater. Combined exposure induced much stronger inhibitory effects than either single pollutant, markedly weakening the late-phase biomass recovery observed under the antibiotic-only treatment. DMSP dynamics exhibited a biphasic disruption pattern: an initial transient accumulation was followed by persistently low concentrations later in the experiment, coinciding with pronounced declines in microeukaryotic and total biomass. Combined metagenomic and flow cytometric analyses revealed a “functional decoupling” scenario, in which the surviving community displayed elevated relative abundances of DMSP biosynthesis- and degradation-related genes, while the sharp reduction in microeukaryotic biomass and overall community size constrained the maintenance and renewal of the water-column DMSP pool. Co-occurrence network analysis further showed that co-exposure simplified the microbial network from a more distributed, complex structure to a highly centralized one, with fewer nodes and keystone taxa and decreased robustness indices along the pollution gradient. Together, these findings indicate that the co-occurrence of nanoplastics and antibiotics can disturb DMSP-related functions by eroding community structural stability and functional redundancy, providing experimental evidence for the vulnerability of coastal DMSP cycling to mixed-pollutant stress.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF THE EUROPEAN CERAMIC SOCIETY
·
2026
·Vol. 46
·期 9
·118212
·
IF 6.3
Xinyu Wang,Ruipeng Wang,Jianli Jiang,Haining Meng,Haigang Hou,Jian Yang,Guiwu Liu,Guanjun Qiao
PbTe-based thermoelectric materials are promising for mid-temperature waste heat recovery, yet n-type PbTe underperforms its p-type counterpart. Herein, high-performance n-type PbTe is achieved through I/Ge co-doping and in-situ composite engineering with Sb 2 Te 3 prepared by melting combined spark plasma sintering. Sb 2 Te 3 alloying introduce in-situ formed Sb/Sb 2 Te 3 precipitates. Furthermore, iodine doping optimizes the carrier concentration to ∼3.4 × 10 19 cm –3 , boosting the room-temperature electrical conductivity to ∼1404 S cm −1 and yielding a high power factor of ∼17.4 μW cm −1 K −2 for the PbTe-Sb 2 Te 3 sample. Meanwhile, lattice thermal conductivity is synergistically suppressed to ∼0.37 W m –1 K –1 at 673 K through Ge-induced point defects/off-center anharmonicity and Sb/Sb 2 Te 3 precipitates. This synergistic strategy results in a peak ZT of ∼1.30 at 823 K and a high average ZT of ∼0.91 at 323–823 K. This work demonstrates that synergistic I/Ge co-doping and composite precipitation effectively enhance thermoelectric performance in n-type PbTe.
✓ 已验证
产品关联
DOI
高影响因子
ACS Sustainable Chemistry & Engineering
·
2020
·
IF 7.632
Enhui Wu,Xiaoshan Feng,Yingbin Zheng,Daifeng Lin,Yongjin Luo,Yufeng You,Baoquan Huang,Qingrong Qian,Qinghua Chen
Mn–Co–O catalysts with different Mn/Co molar ratios were synthesized by means of a facile inverse coprecipitation strategy and applied for the oxidation of propane (C3H8). The XRD pattern of Co2Mn1Oδ (molar ratio of Mn:Co = 1:2) indicates a Co3O4 phase, and most Mn incorporates into Co3O4 lattice to form a solid solution. Minor distributed Mn species occur structure reforming, totally converting to a stable Co–Mn solid solution during oxidation process. Meanwhile, Co2Mn1Oδ features a porous core–shell morphology, the core and shell of which are made up of Co–Mn solid solution, giving rise to a high surface area. The optimized synergistic effect of manganese and cobalt improves low temperature reducibility and produces rich surface active Co3+ species and surface-absorbed oxygen over Co2Mn1Oδ. As a result, it exhibits a prominent excellent catalytic activity, and delivers good thermal stability in the presence of 5 vol % H2O and 5 vol % CO2. In situ DRIFTs analysis displays the reaction path of C3H8 over Co2Mn1Oδ, where dominate intermediate species formate are easily decomposed into CO2. The synthesized porous core–shell Mn–Co–O can be a promising candidate replacing non-noble catalysts toward C3H8 oxidation at low temperature.
研究领域:
催化化学
·
环境化学
·
材料科学
·
多相催化
·
能源与环境科学
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2026
·
IF 12.5
Zhu Xian,Zhihao Lu,Zihan Zhang,Yaning Liu,Yuchen Wang,Chaoyang Li,Chengshuai Jiang,Yingying Cai,Gongqiang Li,Xiao Huang,Gang Lu
The catalyst of FeCoS 2 particles were coated with a thin layer of poly(methyl methacrylate) (PMMA) for catalysis enhancement. • An exceptional CO production rate of 72.21 ± 3.37 mmol·g −1 ·h −1 was achieved, roughly 3.5 folds of pristine FeCoS 2 . • This catalysis enhancement is attributed to multiple factors, including enhanced light absorption, promoted interfacial charge transfer, optimized mass transportation, and improved reaction kinetics. Photocatalytic conversion of carbon dioxide (CO 2 ) to fuel, including carbon monoxide (CO), using solar energy offers a sustainable path to addressing energy and environmental crises. However, the efficiency of this conversion is far below the requirement for practical applications. In this work, an exceptional record-high CO production rate of 72.21 ± 3.37 mmol·g −1 ·h −1 was achieved by coating the nanocatalyst of FeCoS 2 particles with a thin layer of poly(methyl methacrylate) (PMMA). This CO production rate is roughly 3.5 folds of the photocatalytic activity of pristine FeCoS 2 . This PMMA coating-induced enhancement can be attributed to the synergistic effects of multiple factors, including enhanced light absorption, promoted interfacial charge transfer, optimized mass transportation, and improved reaction kinetics. Overall, this study establishes a simple, straightforward and versatile strategy for designing and preparing highly efficient photocatalysts, with potential applicability across diverse photocatalytic reactions. Download: Download high-res image (123KB) Download: Download full-size image
✓ 已验证
DOI
高影响因子
BIORESOURCE TECHNOLOGY
·
2026
·
IF 8.2
Zhiqin Li,Yuxin Kang,Tengran luo,Zegang Qiu,Zhuoyuan Li,Yanan Zhu
Ce reduced the charge density around Co and enriched defects on surface of catalyst. • Ce incorporation facilitates vanillin adsorption and H 2 activation at molecular level. • 9Co-1Ce/NC achieves 100 % vanillin conversion and 100 % selectivity of target product. • Co-Ce synergy promotes rate-determining C-O bond cleavage of two-step reaction pathway. The efficient conversion of lignin-derived oxygenates into fuels and high-value chemicals is pivotal for the development of renewable energy systems. A central challenge lies in the selective cleavage of the inherently recalcitrant C–O bonds in bio-oil model compounds under mild conditions. In this study, a multi-interface Co-Ce catalyst supported on nitrogen-doped carbon was successfully constructed via a bimetallic synergy and metal–organic framework (MOF)-derived strategy. The introduction of Ce exerted a multifunctional synergistic effect beyond that of a conventional promoter, realizing multi-scale modulation of the catalyst structure and performance. It modulated the electronic structure of Co active sites, thereby optimizing reactant adsorption and H 2 activation. Also, it suppressed the agglomeration of Co nanoparticles, thereby enhancing metal dispersion. Concurrently, it significantly increased the concentration of oxygen vacancies on the support surface, which collaboratively provided abundant active sites. Furthermore, it guided the formation of a hierarchical pore architecture conducive to mass transfer. Through this precise design and regulation of the active site microenvironment, the optimal catalyst achieved 100 % conversion of the model compound vanillin with 100 % selectivity toward 2-methoxy-4-methylphenol (MMP) under mild conditions, while also exhibiting excellent cycling stability and broad substrate applicability. This work not only demonstrates catalytic performance rivaling that of noble metals through the efficient synergy between non-noble metals (Ce and Co) but, more importantly, elucidates the underlying mechanism for the selective cleavage of C–O bonds. Download: Download high-res image (117KB) Download: Download full-size image
✓ 已验证
DOI
PubMed
高影响因子