APPLIED CATALYSIS B-ENVIRONMENTAL
·
2021
·
IF 19.503
Xiaoyun Chen,Huizhi Sun,Dong-Hau Kuo,Adugna Boke Abdeta,Osman Ahmed Zelekew,Yuanbo Guo,Jubin Zhang,Zhanhui Yuan,Jinguo Lin
Photocatalytic H 2 O splitting by sulfide-based materials is a great challenge, because of the poor resilience of such materials against hole oxidation. Although sulfide ion of catalyst negatively shifts the valence band-edge relative to its oxide ion, the instability of sulfide ions during H 2 O oxidation is a critical obstacle to simultaneous evolution of H 2 and O 2 . Here, active, stable, and spherical nanoflower-like bimetal (Mo,Ni)(S,O) 3- x sulfo-oxide catalysts with a band gap of ∼2.1 eV and different concentrations of oxygen vacancy defects were synthesized for H 2 O splitting. (Mo,Ni)(S,O) 3- x of 25 mg with a suitable amount of oxygen vacancy defects could evolve 587.5 μmol/h H 2 under visible-light irradiation. This work demonstrated an example of converting an oxidation photocatalyst into a reduction one. Microstructure analysis showed that surface oxygen vacancy defects and the multiple-valence charges in Ni and Mo not only promoted effective separation, interface transfer, and reactions of photo-carriers but also reduced the charge build-up to avoid photo-corrosion during photocatalytic water decomposition.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2020
·
IF 7.489
Guoqiang Liu,Xue Xia,Cuijiao Zhao,Xian Zhang,Weixin Zhang
Development of well-designed bifunctional electrocatalysts with high activity for OER (oxygen evolution reaction) and ORR (oxygen reduction reaction) are a crucial topic owing to their promising applications in rechargeable Zinc (Zn)-air battery. Herein, a facile adsorption-pyrolyzation strategy is proposed for preparing ultrafine Ni nanoparticles anchored on carbon nanofiber (Ni/CNF), which derives from pyrolyzation of bacterial cellulose (BC) (with pre-adsorbed of Ni 2+ ) via a two-step heat-treatment procedure (firstly 360 ℃, and then 750 ℃) (Ni/CNF-750) and used as an excellent oxygen electrocatalyst for flexible all solid-state Zn-air cell. The resultant ultrafine Ni/CNF-750 with plentiful pore structure and relatively high specific surface area of 449.0 m 2 g −1 , delivering overpotential of 293 mV at current density of 10 mA cm −2 for OER, obtaining an onset potential of 0.93 V vs. RHE and half-wave potential of 0.76 V vs. RHE for ORR. Moreover, a home-made flexible all solid-state battery is constructed by using Ni/CNF-750 as air electrodes, which provides a power density of 56.8 mW cm −2 and wonderful cycling durability with maintaining 50 cycles, and can drive a light-emitting-diode (LED) device. Our work may provides a reliable approach for fabricating ultrafine metal nanoparticles anchored on carbon based substrate with high activity for next-generation energy conversion and storage devices.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Catalysts
·
2020
·Vol. 10
·期 3
·303
·
IF 3.52
Yaodan Wang,Hongyan Pan,Qian Lin,Yongyong Shi,Jiesong Zhang
Hydrogen peroxide (H2O2), as a clean and green oxidant, is widely used in many fields. The direct synthesis of H2O2(DSHP) from H2and O2has attracted most research interest because it relates to a facile, environmentally friendly, and economic process. Yolk–shell Pd-M@HCS (hollow carbon sphere) (M = Co, Ni, Cu) nanocatalysts, in which the bimetal nanoparticle is the core and porous carbon works as the shell layer, are reported in this work. It was found that catalytic activities were enhanced because of the introduced M metals. Additionally, the different mass ratios of Pd to Co (mPd/mCo) were further investigated to improve the catalytic performance for the DSHP. When mPd/mCo was 4.4, the prepared Pd-Co@HCS-(4.4) catalyst, with an average Pd nanoparticle size of 7.30 nm, provided the highest H2O2selectivity of 87% and H2O2productivity of 1996 mmolgPd−1·h−1, which were increased by 24% and 253%, respectively, compared to Pd@HCS.Keywords:direct synthesis of hydrogen peroxide;Pd-based catalyst;yolk–shell structure
✓ 已验证
产品关联
DOI
高影响因子
Nano Research
·
2020
·Vol. 13
·期 12
·3321-3329
·
IF 8.183
Xie Heping,Lan Cheng,Chen Bin,Wang Fuhuan,Liu Tao
The development of noble-metal-free electrocatalysts for water splitting is indispensable for the efficient production of hydrogen fuel. Herein, a Co-doped Ni-Mo phosphide nanorod arrays fabricated on porous Ni foam was shown to be an efficient binder-free electrocatalyst for water splitting. This catalyst featured exceptional activity, exhibiting an overpotential of 29 mV at a current density of 10 mA·cm −2 for the hydrogen evolution reaction, whereas the corresponding precatalyst exhibited an overpotential of 314 mV at a current density of 50 mA·cm −2 for the oxygen evolution reaction. The achieved electrocatalytic performance provided access to a simple water splitting system, affording a current density of 10 mA·cm −2 at 1.47 V in 1 M KOH electrolyte. Density functional theory results indicated that Co doping and phosphorization were responsible for the high electrocatalytic performance. Thus, this work paves the way for the development of novel noble-metal-free electrocatalysts for practical H 2 production via water splitting.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2020
·
IF 8.758
Guangfu Qian,Jinli Chen,Lin Luo,Hao Zhang,Wei Chen,Zhejiang Gao,Shibin Yin,Panagiotis Tsiakaras
Developing high performance bifunctional transition metal catalysts would be significantly beneficial for electrocatalytic oxidation of urea-rich wastewater. Herein, we synthesize a V2O3 nanosheet anchored N-doped-carbon encapsulated Ni heterostructure (Ni@C–V2O3/NF) for the reactions of urea oxidation (UOR) and hydrogen evolution (HER). Electrochemical results indicate that it exhibits small potentials of 1.32, 1.39, and 1.43 V for UOR and low overpotentials of 36, 254, and 355 mV for HER at ±10, ± 500 and ±1000 mA cm–2, respectively. It can work at 100 mA cm–2 for over 72 h as cathode and anode electrode without obvious attenuation, suggesting an outstanding durability. The reason for this behavior could be ascribed to the N-doped-carbon coating structure, the synergetic effects between Ni and V2O3, and the nano/micro nanosheets architecture self-supported on nickel foam. This work could provide a promising, inexpensive, and green method for the degradation of urea-rich wastewater and hydrogen production.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Nano
·
2020
·
IF 14.588
Shijun Wang,Diansen Li,Yue Zhou,Lei Jiang
The increasing demand for wearable electronics and the intensification of electromagnetic pollution have boosted the exploration of high-performance flexible microwave absorption (MA) materials. Herein, the hierarchical Ti3C2Tx MXene/Ni chain/ZnO array hybrid nanostructures are rationally constructed on cotton fabric for acquiring enhanced MA performance and durable self-cleaning ability. Based on the high dielectric loss capacity of MXenes and ZnO arrays, by controlling dip-coating numbers of Ni chains, the magnetic loss can be manipulated to modulate the impedance matching, reflection loss (RL), and effective absorption bandwidth (EAB, the bandwidth of RL < −10 dB). The minimum RL value of the designed fabric can reach −35.1 dB at 8.3 GHz with a thickness of 2.8 mm, and its EAB can cover the whole X-band with only a 2.2 mm thickness. In addition, the designed fabric also exhibits superior liquid repellency and durable self-cleaning ability due to the combination of the hybrid nanostructures and a superhydrophobic coating. This work provides an insight for rational design of textile-based MA materials, showing potential applications in flexible and wearable functional electronics.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
APPLIED SURFACE SCIENCE
·
2020
·
IF 6.182
Guanliang Chen,Xiujuan Lin,Jianan Li,Shifeng Huang,Xin Cheng
Polymer-based composites comprising of high dielectric constant ceramic nanoparticles are widely used in dielectric capacitors due to their excellent energy storage and processing properties. In this study, ultra-small Ni nanoparticles were used to fabricate core-satellite structured hybrid Ni@BT nanoparticles. Compared with BT/PVDF composites, the Ni@BT/PVDF nanocomposites exhibited the enhanced energy storage properties due to the low electric conductivity, small dielectric loss and improved breakdown strength. The maximum discharged energy density reached 9.55 J/cm 3 for nanocomposites with 3 vol% Ni@BT at the electric field of 350 kV/mm, which was nearly eight times of commercial BOPP (1.2 J/cm 3 at 640 kV/mm) and was around 208% compared to the pristine PVDF (4.58 J/cm 3 at 340 kV/mm). The improved energy density of the nanocomposites could be attributed to the Coulomb-blockade effect of the introduced ultra-small Ni nanoparticles exactly. This work provides an effective approach to improve the energy storage property of dielectric nanocomposites.
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2020
·
IF 4.939
Yun Zhou,Xigang Yang,Shengqi Xi,Bing He,Yongping Song
Alkaline solution is considered to be more suitable for industrial application of hydrogen production by water electrolysis . However, most of the low-cost electrocatalyts such as Ni 3 S 2 has poor ability to dissociate HO–H, resulting in unsatisfied hydrogen evolution performance in alkaline media . In this paper, a novel vermicular structure of Ni 3 S 2 –Ni(OH) 2 hybrid have been successfully prepared on nickel foam substrate ( v -Ni 3 S 2 –Ni(OH) 2 /NF) through a facile two-step containing hydrothermal and electrodeposition processes. The heterostructure consists of rod-like Ni 3 S 2 and Ni(OH) 2 nanosheets , in which Ni(OH) 2 is coated on the surface of Ni 3 S 2 . This structure not only constructs a fast electron transfer channel but also possesses rich heterointerface, thus accelerating the Volmer step and allowing more active sites of Ni 3 S 2 to functioning well. As a result, v -Ni 3 S 2 –Ni(OH) 2 /NF exhibited excellent electrocatalytic activity toward HER in 1.0 M KOH solution. It only needs 78 mV and 137 mV to drive current density of 10 mA cm −2 and 100 mA cm −2 . Moreover, the catalytic stability of this electrocatalyst in alkaline solution is also satisfactory.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Materials Chemistry A
·
2020
·Vol. 8
·期 11
·5699-5708
·
IF 11.301
Xin Qian,Dongyang Wang,Yang Zhang,Haijun Wu,Stephen J. Pennycook,Lei Zheng,Pierre F. P. Poudeu,Li-Dong Zhao
The metallic elements with a small atomic radius can not only compensate for the intrinsic vacancies to improve the carrier mobility, but also can form interstitials to reduce lattice thermal conductivity. In this work, we investigate the contrasting roles of three different metallic elements with small atomic radius on the thermoelectric properties of n-type PbM0.01Se (M = Cu, Zn, Ni). We find that all the metallic elements can increase the carrier concentration as electron donors and improve the electrical transport properties. In addition, the lattice thermal conductivity of PbSe can be significantly decreased through the formation of interstitials by the incorporated extra metallic elements. We also find that the PbCu0.01Se sample exhibits a unique and complex behavior compared with the other samples due to the diffusion and the thermally activated oxidation of Cu+ ions. When the temperature increased to 673 K, the carrier concentration of PbCu0.01Se sample increases suddenly and continues to increase by nearly two folds, which we ascribe to the release of 3d orbital electrons in Cu+ ions. This results in a strong decoupling of the charge and heat transport in the material, which can be manifested by the overestimation of the electronic thermal conductivity when assuming strong electron–phonon coupling in Wiedemann–Franz law. A maximum ZT of ∼1.6 can be reached at 773 K and the average ZT of ∼0.96 can be achieved in PbCu0.01Se. Our results demonstrate the exceptional contrasting behavior of Cu in PbSe by comparing with Zn and Ni, and the thermoelectric performance of n-type PbSe can be enhanced through the introduction of extra metallic elements with small radius.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2020
·
IF 4.65
Yunlong Zhou,Dongyao Lin,Xiaoyuan Ye,Mingyuan Zhu
In this study, sulfur-doped Ni(OH) 2 was prepared by an immersion method at room temperature and used as an efficient co-catalyst for g-C 3 N 4 in photocatalytic hydrogen evolution . The structure, morphology, and elemental composition of the sulfur-doped Ni(OH) 2 /g-C 3 N 4 were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy , and X-ray photoelectron spectroscopy. These results proved that the sulfur-doped Ni(OH) 2 was successfully synthesized and combined with g-C 3 N 4 at the heterojunction . The photocatalytic hydrogen generation results of Ni(OH) 2 /g-C 3 N 4 (0 μmol g −1 h −1 ) and that of sulfur-doped Ni(OH) 2 /g-C 3 N 4 (1573.7 μmol g −1 h −1 ) indicate that the sulfur doping resulted in significant improvement in the catalytic activity of co-catalyst Ni(OH) 2 . Moreover, the possible mechanism of photocatalytic hydrogen evolution catalyzed by the sulfur-doped Ni(OH) 2 /g-C 3 N 4 was proposed. The results of photoluminescence , ultraviolet–visible diffuse reflectance spectroscopy , and electrochemical analysis demonstrated that the sulfur doping provided more active sites in Ni(OH) 2 , leading to the efficient hydrogen evolution reaction, thus indirectly enhancing the separation efficiency of electron–hole pairs and the migration efficiency of photogenerated electrons by the photocatalyst g-C 3 N 4 .
✓ 已验证
产品关联
DOI
高影响因子
Nanoscale
·
2020
·Vol. 12
·期 27
·14615-14625
·
IF 6.895
Yaru Bian,Hao Wang,Zhi Gao,Jintang Hu,Dong Liu,Liming Dai
Trifunctional electrocatalysts for the oxygen reduction reaction (ORR), oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) are crucial for many electrochemical devices. Herein, novel trifunctional electrocatalysts of a hierarchically-structured Pt/NiO/Ni/CNT with ultrasmall Pt nanoparticles (∼2 nm) were synthesized via substrate-enhanced electroless deposition. The resulting catalysts exhibited a higher ORR activity (half-wave potential at 0.942 V) than that of the benchmark commercial Pt/C (20 wt%) and a similar OER activity (overpotential of 350 mV at 10 mA cm−2) to that of RuO2 in alkaline media. Moreover, the newly-developed Pt/NiO/Ni/CNT catalysts also showed a high mass activity superior to Pt/C towards the HER in both acid and alkaline electrolytes. The Pt/NiO/Ni/CNT catalysts, when used for overall water splitting, self-powered by two Zn–air batteries with the Pt/NiO/Ni/CNT air electrodes connected into series, displayed superb performance with 1.61 V at 10 mA cm−2. This work represents a breakthrough in the development of facile approaches to trifunctional catalysts from low-cost Earth-abundant materials for efficient energy conversion and storage.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
FUEL
·
2020
·
IF 5.578
Lei Chen,Guangci Li,Mingjie Zhang,Da Wang,Shuangju Li,Chuanhui Zhang,Xuebing Li,Keng H. Chung
Catalytic deoxygenation of fatty acids to alkanes is an ideal route to produce biodiesel with high heating value . However, traditional transition-metal sulfide and noble metal catalysts are sulfide-contaminated, high cost, or easily poisoned. To overcome the above issues, this work developed a non-noble and sulfide-free reduced transition-metal composite Ni x Nb y O z , which was effective to selectively hydrogenate stearic acid , a typical fatty acid model compound, to diesel-range alkanes. By using a simple slurry method, reduced Ni x Nb y O z catalysts have been successfully prepared with an outstanding catalytic performance. The results showed that catalyst Ni 0.5 Nb 0.5 O z effectively converted stearic acid to n -alkanes with nearly 100% conversion and >99% n -alkanes selectivity at mild conditions (513 K and 3.5 MPa of H 2 pressure). Appropriate Nb species improved the dispersion of Ni species, which may supply more hydrogenation active sites. Two possible reaction routes of stearic acid were proposed, and the hydrogenolysis of stearyl stearate was confirmed as the rate-determining step based on the kinetics experiments. Because of moderate acidity of Nb species, the ratio of C 17 /C 18 alkane was not markedly affected by reaction conditions when the conversion of stearic acid was higher than 99%. Moreover, catalyst Ni 0.5 Nb 0.5 O z showed a high recycle ability and compatibility for other long-chain fatty acids, demonstrating that catalyst Ni 0.5 Nb 0.5 O z is a promising green catalyst for producing biodiesel from fatty acids.
✓ 已验证
产品关联
DOI
高影响因子