JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS
·
2023
·
IF 4
Zong-Bao Yu,Zhuozhuo Song,Peng Zheng,Jie Sun,Zhanxu Yang
Transition metal sulfides (TM sulfides) has long been regarded as highly promising materials for catalyzing oxygen evolution reaction (OER). The function of TM sulfides in OER occurs on TM oxyhydroxide and SO 4 2− , which are formed through surface reconstruction under certain potentials. It is worth noting that the impact of SO 4 2− on the local charge distribution among atoms, a crucial determinant of OER performance, has been insufficiently studied. This study aims to investigate the role of SO 4 2− in mediating the partial redistribution of charges among Co, Ni and O atoms on a precatalyst Co 9 S 8 /C–Ni(OH) 2 electrode. The electrode undergoes self-reconstruction to form a CoOOH/SO 4 2− /NiOOH structure on its surface that is active for the OER. The results demonstrate that SO 4 2− facilitates the local charge redistribution of active atoms, leading to optimized adsorption energy of OER intermediates and increased redox center of the material. Furthermore, SO 4 2− serves as an electron mediator in the OER process under varying applied voltages. Consequently, CoOOH/SO 4 2− /NiOOH achieves a Tafel slope of 56 mV dec −1 , an overpotential of 250 mV, and maintains a high stability for over 100 h at a current density of 20 mA cm −2 . Overall, this research provides valuable insights into catalytic reaction mechanisms and the design of efficient composite catalysts.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2021
·
IF 19.503
Xiaoyun Chen,Huizhi Sun,Dong-Hau Kuo,Adugna Boke Abdeta,Osman Ahmed Zelekew,Yuanbo Guo,Jubin Zhang,Zhanhui Yuan,Jinguo Lin
Photocatalytic H 2 O splitting by sulfide-based materials is a great challenge, because of the poor resilience of such materials against hole oxidation. Although sulfide ion of catalyst negatively shifts the valence band-edge relative to its oxide ion, the instability of sulfide ions during H 2 O oxidation is a critical obstacle to simultaneous evolution of H 2 and O 2 . Here, active, stable, and spherical nanoflower-like bimetal (Mo,Ni)(S,O) 3- x sulfo-oxide catalysts with a band gap of ∼2.1 eV and different concentrations of oxygen vacancy defects were synthesized for H 2 O splitting. (Mo,Ni)(S,O) 3- x of 25 mg with a suitable amount of oxygen vacancy defects could evolve 587.5 μmol/h H 2 under visible-light irradiation. This work demonstrated an example of converting an oxidation photocatalyst into a reduction one. Microstructure analysis showed that surface oxygen vacancy defects and the multiple-valence charges in Ni and Mo not only promoted effective separation, interface transfer, and reactions of photo-carriers but also reduced the charge build-up to avoid photo-corrosion during photocatalytic water decomposition.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2021
·
IF 19.503
Chen Chen,Yongxiao Tuo,Qing Lu,Han Lu,Shengyang Zhang,Yan Zhou,Jun Zhang,Zhanning Liu,Zixi Kang,Xiang Feng,De Chen
Metal-organic frameworks (MOFs) have recently emerged as promising precursors to construct efficient non-noble metal electrocatalyst for oxygen evolution reaction (OER). Herein, a Co-Ni-Fe spinel oxide-carbonitrides hybrids (CoNiFeO x -NC) electrocatalyst with hierarchical structure was synthesized from Fe-MIL-101-NH 2 through a unique ion-exchange based strategy. The ion exchange of Fe-MIL-101-NH 2 with both Ni and Co ions induced a hierarchically structured 2-D ternary metal MOF shell layer encapsulated 3-D octahedral MOF crystals as a core. This prevents the collapse of MOF frameworks during the air calcination process and affords highly porous structure and large surface area. Additionally, the unique combination of Co-Ni-Fe in spinel oxides derived from calcination of the hierarchically structured core-shell MOF provides a favorable electronic environment for the adsorption of OER intermediates, which was further verified by the XPS characterizations and DFT calculations. DFT study revealed the Ni-Co coordinated O h sites in the MFe 2 O 4 reverse spinel structures as the main active sites, which tuned the binding strength of oxygen species with a catalyst through electron transfer of Fe→Co→Ni, thereby lowered the energy barriers for OER. As a result, the rationally designed CoNiFeO x -NC catalyst manifests superior OER performance with a low overpotential of 265 mV at 50 mA cm −2 and a decent Tafel slope of 64.1 mV dec -1 . The ion-exchange based strategy may serve as a versatile platform for rational design and synthesis of multi-metallic MOF derived electrocatalysts.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ELECTROANALYTICAL CHEMISTRY
·
2021
·
IF 4.464
Jun Wan,You Shen,Liqiang Xu,Ruixue Xu,Jinfan Zhang,Haodi Sun,Chongyu Zhang,Chuanxia Yin,Xinxing Wang
The development of selective electrochemical response materials and new detection strategies are the research focus in the field of heavy metal ion (HMI) electroanalysis. Herein, a Ni(II)-based metal-organic framework (NH 2 -Ni-MOF) was synthesized and functionalized by electrochemically active molecule of ferrocene (Fc) via post-synthesis modification. Based on the Fc-functionalized NH 2 -Ni-MOF (Fc-NH 2 -Ni-MOF), a novel electrochemical ratiometric sensing platform was developed and applied for the simultaneous determination of various HMIs. The prepared NH 2 -Ni-MOF exhibits nanoplate structure, which is conducive to increase accessible electrode area and expose more active sites, thus promoting the adsorption and pre-concentration of HMIs. The modification of Fc on MOF not only enhances the electrical conductivity of the MOF material, but also provides an internal reference signal for the ratiometric analysis. Due to the excellent characteristics of the Fc-NH 2 -Ni-MOF, the as-prepared ratiometric electrochemical sensing platform exhibits wide linear ranges (0.001 μM to 2.0 μM for lead ions (Pb 2+ ), and 0.01 μM to 2.0 μM for copper ions (Cu 2+ ) as well as cadmium ions (Cd 2+ )) and high sensitivity (the detection limit toward Cu 2+ , Pb 2+ and Cd 2+ is 6.3 nM, 0.2 nM and 7.1 nM, respectively). In addition, compared with the non-ratiometric strategy, the reproducibility of ratiometric analysis is significantly improved. The developed electrochemical method with high sensitivity, selectivity and reliability exhibits bright application prospects in the detection of real samples. Moreover, the electrochemical application of MOF materials has been effectively expanded.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2021
·
IF 8.128
Zhi Zhang,Fangyan Liu,Zeyu Huang,Maoyi Yi,Xinming Fan,Maohui Bai,Bo Hong,Zhian Zhang,Jie Li,Yanqing Lai
Electrode (including cathode and anode) /electrolyte interfaces play a vital role in determining battery performance. Especially, high-voltage lithium metal batteries (HVLMBs) with the Ni-rich layered oxide ternary cathode (NCM) can be considered a promising energy storage technology due to their outstanding energy density. However, it is still extremely challenging to address the unstable electrode/electrolyte interface and structural collapse of polycrystalline NCM at high voltage, greatly restraining its practical applications. In this work, a novel electrolyte additive, tris(2-cyanoethyl) borate (TCEB), has been used to construct the robust nitrogen (N) and boron (B)-rich protective films on single-crystal LiNi 0.6 Co 0.1 Mn 0.3 O 2 (SNCM) cathode and lithium metal anode surfaces, which could effectively mitigate parasitic reactions against electrolyte corrosion and retain the structural integrity of electrode. Remarkably, the SNCM||Li metal cell using TCEB-containing electrolyte maintains unprecedentedly superb capacity retention of 80% after 100 cycles at an ultrahigh charging voltage of 4.7 V (versus Li/Li + ). This finding provides a valuable reference to construct a stable electrode/electrolyte interface for the HVLMBs with achieving high-energy density.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2021
·
IF 5.316
Jiangshan Gao,Huanhuan Wang,Yang Zhou,Zhiming Liu,Yan He
The combination of magnetic nanoparticles and transition metal oxides has attracted much attention in microwave absorption applications. Herein, the MnO 2 /Mn 3 O 4 @Ni-Co/graphite carbon (GC) nanocubes with porous structure and ultrathin nanosheets was constructed by self-template strategy and in-situ synthesis. The composites not only synergize the magnetic loss of magnetic Ni-Co nanoparticles with the dielectric losses of GC and MnO 2 /Mn 3 O 4 , but also enhance the multiple interface polarization and improve impedance matching. As a result, the MnO 2 /Mn 3 O 4 @Ni-Co/GC nanocubes present outstanding electromagnetic wave (EMW) absorption performances, in which a RL min of −26 dB at 6.4 GHz with a thickness of 4 mm and an effective absorption bandwidth covering from 5.3 GHz to 6.4 GHz are achieved. Meanwhile, the widest effective absorption bandwidth with the value of 3.7 GHz can be achieved at a matching thickness of 2.0 mm. More importantly, this work provides a new strategy for the synthesis of EMW absorbing materials.
✓ 已验证
产品关联
DOI
高影响因子
RSC Advances
·
2021
·Vol. 11
·期 31
·19128-19135
·
IF 3.361
Tong Ye,Hongye Li,Mingyue Du,Xiaowei Ma,Xiaolin Liu,Lixiong Wen
Polymer-based dielectric nanocomposites as raw materials of dielectric capacitors used in advanced electronics and electrical systems have a great application prospect but remain a huge challenge to energy storage performance in high electric fields. In this work, MgAl layered double hydroxide (MgAl LDH) nanosheets loaded with Ni nanoparticles were designed and synthesized, and incorporated into polyvinylidene fluoride (PVDF) to fabricate Ni–MgAl LDH/PVDF nanocomposites with high energy density. The effect of Ni–MgAl LDH nanosheet content (0.2 to 0.8 wt%) on the energy storage performance of MgAl LDH/PVDF nanocomposites was studied. As a result, after adding 0.6 wt% Ni–MgAl LDH nanosheets, the nanocomposites obtained the highest energy density 23.87 J cm−3 (at 640 kV mm−1) and the charge–discharge efficiency reached 65%, which was 76% and 18% higher than that of pure PVDF, respectively. This improvement could be attributed to the multiple functions of Ni–MgAl LDH nanosheets under an applied electric field. On the one hand, Ni nanoparticles on the surface of the MgAl LDH nanosheets could enhance the interfacial conductivity, form plenty of parallel micro-capacitors and produce Coulomb blockade effect, which resulted in high dielectric constant and high breakdown strength. On the other hand, two functions contributed by MgAl LDH nanosheets, homogenizing the electric field and inhibiting the growth of the electric tree coming from its medium dielectric constant and sheet structure, were beneficial to increase the breakdown strength. Furthermore, finite element simulations were employed to explain the mechanism of improved dielectric properties of the Ni–MgAl LDH/PVDF nanocomposites.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2021
·
IF 8.128
Di Chen,Guofu Li,Xing Chen,Qian Zhang,Jing Sui,Chengjie Li,Yingchao Zhang,Jing Hu,Jianhua Yu,Liyan Yu,Lifeng Dong
Rational construction of advanced bifunctional catalysts with dual-active-sites is still challenging for both oxygen reduction (ORR) and oxygen evolution reactions (OER). Herein, metal-doped dicyandiamide formaldehyde resin is innovatively exploited to synthesize N/Co/Fe/Ni multi-doped carbon nanotubes (denoted as CoFeNi@CNT) with metal-nitrogen-carbon (M N C) and CoFeNi nanoparticles as the ORR and OER active sites, respectively. Abundant active sites and high degree of graphitization enable CoFeNi@CNT with a high ORR half-wave potential of 0.82 V and a low OER overpotential of 440 mV at 10 mA cm −2 , which are comparable or superior to noble-metal catalysts. Particularly, the CoFeNi@CNT air electrode of rechargeable Zn-air batteries shows remarkable open circuit potential (1.46 V), discharge power density (152.3 mW cm −2 ), specific capacity (814 mAh g −1 ), and cycling stability for more than 250 h. It is worth emphasizing that this synthesis strategy is rather simple, low-cost, high yield, and the proportion and amount of doped metal ions can be easily adjusted according to the needs for different applications.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF MATERIALS SCIENCE
·
2021
·Vol. 56
·期 15
·9419-9433
·
IF 4.22
Xuan Haicheng,Wang Rui,Yang Jing,Zhang Guohong,Liang Xiaohong,Li Yuping,Xie Zhigao,Han Peide
Currently, substantial attention has been concentrated on the preparation and practical application of complex hierarchical nanostructure composite, which exhibits excellent electrochemical properties compared to the single-structured materials. Hence, a novel electrode of NiMoO 4 @Co 3 O 4 –5H composite nanoarrays supported on reduced graphene oxide/Ni Foam (rGO/NF) was synthesized through the facile hydrothermal method. The composite combines the advantages of the large specific capacitance of NiMoO 4 and the great rate capability of Co 3 O 4 , exhibiting the distinguished specific capacitance and rate performance. The prepared NiMoO 4 @Co 3 O 4 –5H composite shows an enhanced pseudocapacitive performance of about 1722.3 F g −1 at a current density of 1 A g −1 , and eminent rate capability of 80.8% at 10 A g −1 . Moreover, the composite delivers good long-term cycling stability with capacitance retention of 91% after 6000 cycles. An asymmetric supercapacitor (ASC) was fabricated using NiMoO 4 @Co 3 O 4 –5H and AC as the positive electrode and negative electrode, achieving the high energy density of 37.1 Wh kg −1 at a power density of 798.0 W kg −1 , and exceptional cycling stability (100% retention after 4000 cycles). These consequences suggest that NiMoO 4 @Co 3 O 4 –5H could be considered as a potential electrode material for energy storage devices. Graphical abstract
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2021
·
IF 8.128
Ziqiang Zheng,Ting Wang,Fang Han,Qing Yang,Benxia Li
The development of visible light responsive photocatalysts for simultaneous production of hydrogen (H 2 ) fuel and value-added chemicals is greatly promising to solve the energy and environmental issues by improving the utilization efficiency of solar energy. Herein, the three-component Ni/(Au@CdS) core–shell nanostructures were constructed by the hydrothermal synthesis followed with photodeposition. The intimate integration of plasmonic Au nanospheres and visible-light responsive CdS shells modified with Ni cocatalyst facilitated the generation and separation of electron-hole pairs as well as reduced the overpotential of hydrogen evolution. The Ni/(Au@CdS) photocatalyst exhibited excellent performance toward the selective transformation of benzyl alcohol under anaerobic conditions, and the yields of H 2 and benzaldehyde reached up to 3882 and 4242 μmol·g −1 ·h −1 , respectively. The apparent quantum efficiency (AQE) was determined to be 4.09% under the irradiation of 420 nm. The systematic studies have verified the synergy of plasmonic effect and metal cocatalyst on enhancing the photocatalysis. This work highlights the desirable design and potential application of plasmonic photocatalysts for solar-driven coproduction of H 2 fuel and high-value chemicals.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2021
·Vol. 32
·期 13
·17105-17114
·
IF 2.478
Song Jiali,Wang Zhi,Gao Yu
Nanocrystalline Li 0 . 35 Ni 0.3 Fe 2.35 O 4 ferrites were prepared at different annealing temperatures by sol–gel auto-combustion method. The effects of the annealing temperature on the structure and magnetic properties of the synthesized Li–Ni ferrites were characterized by X-ray diffraction (XRD), scanning electron microscopy, Fourier transform infrared spectra and Vibrating Sample Magnetometer, and X-ray photoelectron spectrometer. Rietveld refinement of the XRD data confirmed the occurrence of phase transition from α-spinel to β-spinel, from which the ideal cation occupation and lattice parameter can be obtained. The grain size increased significantly with annealing temperature. The variation of saturation magnetization can be well explained in terms of the occupation of ions in tetrahedron and octahedron. The coercivity initially increased and later decreased significantly from 115 to 37 Oe with the increase of annealed temperature which could be attributed the fact that the 600 °C-annealed grain size is close to transition size from single- to multi-domain region.
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2021
·
IF 6.953
Hao Liu,Ya-nan Qin,Hao-yu Li,Li-xue Gai,Qing-da An,Shang-ru Zhai,Zuo-yi Xiao,Li Cui
Noble metal-based catalytic material with maximum utilization is of prime attraction for conserving rare metal resources. Herein, highly dispersion Ni nanoparticles (NPs)-modified N-doped mesoporous carbon material (Ni-N@C) was fabricated by pyrolysis of Ni 2+ /Histidine cross-linked alginate hydrogels. In a step forward, the obtained Ni-N@C nanocatalyst was treated by the solution of Pd 2+ , and tiny amount of Pd NPs were deposited on the surface of Ni via the reducibility of Ni to achieve the high dispersion of precious metals material. In the degradation of highly-concentration p-nitrophenol, the catalyst presents excellent performance which could completely degrade pollutants within a very short period. It was demonstrated that pre-embedded Ni NPs could not only increase the efficiency of Pd NPs but also endow the facile separation characteristic to the catalyst. Besides, the catalyst maintained favorable catalytic capacity even after five reaction cycles. In brief, this work may provide novel guidance for the maximum utilization of noble metal-modified mesoporous N-doped carbon-supported catalysts in practical applications of industrial and the treatment highly-concentration p-nitrophenol.
✓ 已验证
产品关联
DOI
PubMed
高影响因子