Nanoscale
·
2024
·
IF 5.8
Hong Liu,Liyang Yu,Haoyong Jin,He Xia,xiaoxiong wang,liang wang,dezheng Li,jiangli Zhao,Jichuan Qiu,Yuanhua Sang,ning yang,Ning Lu
The repair of traumatic spinal cord injury (SCI) remains a challenge due to the non-regenerative nature of functional neurons in adults. Neural stem cell (NSC)-based therapy has emerged as a promising approach for the treatment of SCI by replacing the damaged neurons with differentiated stem cells. However, directing the neuronal differentiation of implanted stem cells in the injury microenvironment is of great difficulty, especially considering that SCI is generally associated with severe fibrotic tissue infiltration, neuron inflammation, and tissue adhesion. Here, we propose a dual functional Janus film capable of preventing tissue adhesion and promoting the neuronal differentiation of stem cells for the treatment of SCI. The Janus film is composed of a layer of polylactic acid (PLA) and a layer of chitosan (CS) grafted with IKVAV peptides. The PLA layer prevents the invasion of the fibrotic tissue, while the IKVAV peptide-grafted CS layer offers support for NSC implantation and thus the neuronal differentiation of the NSCs. When serving as the dura patch, the Janus films seeded with NSCs promote the recovery of motor function and the regeneration of the injured spinal cord tissue of SCI rats. This dual functional Janus film holds great promise for treating SCI in combination with stem cell therapy.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2024
·
IF 7.7
Yang Li,Wanping Dang,Ziqi Deng,Xingyu Chen,Weirui Tang,Jingjing Zhang,Xiqiang Song
Lead ion is very harmful to the environment, so it is very important to study its detection methods. In this study, a novel electrochemical sensor was constructed by modifying deoxyribonucleic acid (DNA) on the electrode, which can be used for the detection of Pb 2+ in the environment. Part of the mixed solution of chitosan (CS) and Pb 2+ template ions was dropped onto the surface of a glassy carbon electrode. CS-Pb 2+ film was cross-linked through sodium tripolyphosphate. And a novel DNA-imprinted sensor was prepared by electrodepositing CS-Pb 2+ thin film with gold nanoparticles (AuNPs), removing Pb 2+ templates, and immobilizing specific double-stranded DNA. The electroactive area, surface morphology , sensitivity, and electrochemical reaction mechanism of the DNA-imprinted sensor were analyzed. The elementary reaction steps were studied through electrochemical reaction kinetics analysis . The experimental results indicate that the DNA-imprinted electrochemical biosensor can quantitatively detect Pb 2+ in the range of 10–100 μM (R 2 = 0.9935), and its detection limit is 6.5074 μM (3σ/slope). The sensitivity of the electrochemical biosensor is 1.55233 × 10 −6 A/μM, and its active areas is 6.233 cm 2 . The desorption mechanism and adsorption mechanism have been explored through dynamic parameter analysis. The novel DNA imprinted electrochemical biosensor developed in this paper provides a robust method for detecting lead ions in solution. Additionally, it establishes a solid groundwork for detecting other metal ions .
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2025
·
IF 8.5
Yuan Fu,Yuanhang Li,Jiaqi Wang,Yichang Jing,Jiangbo Pan,Mingjian Ma,Yuan Shen,Di Wang,Shuangying Wei,Chengyu Wang,Jian Li
Carboxymethyl chitosan (CMCh) is a natural polysaccharide derivative with biodegradability, rich in active amino and carboxyl groups. It can act as a ligand to coordinate with rare earth ions, transferring absorbed energy to the central ion to sensitize its luminescence. In this paper, CMCh-Tb 3+ was prepared as a solid fluorescent probe by mixing CMCh solution with Tb 3+ . The morphology, structure and properties of CMCh-Tb 3+ were characterized and analyzed by SEM, IR and XPS, and then the chemical structure of CMCh-Tb 3+ was determined. CMCh-Tb 3+ , as a highly sensitive fluorescent sensor for detecting Cu 2+ , has a detection limit (LOD) of 27.14 nmol/L. Through characterization using fluorescence spectroscopy, ultraviolet absorption spectroscopy, and fluorescence lifetime, we further explored the mechanism of Cu 2+ fluorescence quenching, finding that this process is primarily achieved through dynamic quenching. Additionally, we discovered that glutathione (GSH) can form a strong coordination with Cu 2+ , thereby inhibiting the quenching effect of Cu 2+ on the emission intensity of CMCh-Tb 3+ and restoring its luminescence characteristics. This finding indicates that CMCh-Tb 3+ can not only serve as a fluorescence sensor for detecting Cu 2+ but also as a reversible fluorescence sensor, significantly enhancing its performance in practical applications.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
MATERIALS SCIENCE IN SEMICONDUCTOR PROCESSING
·
2024
·
IF 4.2
Weiting Zhong,Jiaqi Lu,Jun Hou,Hui Li,Lixia Ma,Xu Zhang,Yanbao Zhao
In this study, water soluble Cu-doped CdS quantum dots (Cu:CdS QDs) were synthesized by one-pot method. The effect of reaction conditions on the Cu:CdS QDs were studied systematically, and the Cu:CdS QDs synthesized under optimizing condition possessed a small size (∼4 nm), high luminance and good self-fluorescence performance. Compared with CdS QDs, the fluorescence emission was redshifted from 627 nm to 720 nm. To reduce cytotoxicity of Cu:CdS QDs, carboxymethyl chitosan (CMCS) molecules were selected to be grafting onto the surface of Cu:CdS QDs through amide bonds and the CMCS modification would greatly impede the release of cadmium ions . Both in vitro cellular cytotoxicity and hemolysis assay demonstrated that the CMCS/Cu:CdS QDs were highly biocompatible and the CMCS/Cu:CdS QDs as fluorescent probes were successfully applied in vivo imaging of small animals and this QDs can be easily metabolized by mice over time without adverse reactions . This new nanoprobes open up exciting opportunities for future biomedical applications .
✓ 已验证
产品关联
DOI
高影响因子
Carbohydrate Polymer Technologies and Applications
·
2024
·
IF 6.2
Yingqi Mi,Yuan Chen,Qing Li,Wenqiang Tan,Zhanyong Guo
Development of secure and efficient drug delivery systems to overcome physicochemical challenges in cancer clinical treatment is one of the most active fields, and novel drug carriers are actively sought. In this work, the successful synthesis of amphiphilic chitosan derivatives containing pyridine cations and folic acid (TMACMCF) was confirmed by FTIR and 1 H NMR spectroscopy. The critical micelle concentration (CMC) of TMACMCF was studied, and the results indicated that it possessed a relatively low CMC (0.186 mg/mL). Self-assembled nanoparticles (TMACMCF-ADM NPs) for the entrapment and delivery of adriamycin (ADM) were synthesized based on TMACMCF, and the morphology, particle size, zeta potential, sustained release performance, antioxidant and antitumor activities, and cytotoxicity were investigated. The particle size of TMACMCF-ADM NPs was 163.79 ± 7.31 nm, and the morphology observed by SEM and TEM showed spherical or oval particles. TMACMCF-ADM NPs showed excellent entrapment of ADM with entrapment efficiency and drug loading efficiency of 65.04 ± 1.20 % and 22.73 ± 0.40 %, respectively. The release performance results showed that in vitro release profiles of ADM from NPs exhibited pH-sensitive controlled and sustained release properties. The assay of antioxidant activity exhibited that TMACMCF-ADM NPs possessed significantly improved scavenging ability against three kinds of radicals (Superoxide-radical, DPPH radical, and ABTS radical). Moreover, the assay of antitumor activity by CCK-8 test exhibited that nanoparticles led to statistically significant enhancement in inhibition index for four kinds of cancer cells (BGC-823, MCF-7, HEPG-2, and A549). This work provides a promising carrier for secure and effective entrapment and delivery of ADM.
✓ 已验证
产品关联
DOI
高影响因子
Gels
·
2024
·Vol. 10
·期 4
·279
·
IF 5
Yang Liu,Mingjian Ma,Yuan Shen,Zhengdong Zhao,Xuefei Wang,Jiaqi Wang,Jiangbo Pan,Di Wang,Chengyu Wang,Jian Li
The use of environmentally friendly and non-toxic biomass-based interfacial solar water evaporators has been widely reported as a method for water purification in recent years. However, the poor stability of the water transport layer made from biomass materials and its susceptibility to deformation when exposed to harsh environments limit its practical application. To address this issue, water-driven recovery aerogel (PCS) was prepared by cross-linking epoxy-based polyhedral oligomeric silsesquioxane (EP-POSS) epoxy groups with chitosan (CS) amino groups. The results demonstrate that PCS exhibits excellent water-driven recovery performance, regaining its original volume within a very short time (1.9 s) after strong compression (ε > 80%). Moreover, PCS has a water absorption rate of 2.67 mm s−1and exhibits an excellent water absorption capacity of 22.09 g g−1even after ten cycles of absorption-removal. Furthermore, a photothermal evaporator (PCH) was prepared by loading the top layer with hydrothermally reacted tannins (HAs) and Zn2+complexes. The results indicate that PCH achieves an impressive evaporation rate of 1.89 kg m−2h−1under one sun illumination. Additionally, due to the antimicrobial properties of Zn2+, PCH shows inhibitory effects against Staphylococcus aureus and Escherichia coli, thereby extending the application of solar water evaporators to include antimicrobial purification in natural waters.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Omega
·
2024
·
IF 3.7
Zijian Liu,Shangbo Li,Zexian Xu,Li Li,Yanshan Liu,Xiaohan Gao,Yaru Diao,Liqiang Chen,Jian Sun
Herein, we introduce a novel composite hydrogel scaffold designed for addressing infectious jaw defects, a significant challenge in clinical settings caused by the inherent limited self-regenerative capacity of bone tissues. The scaffold was engineered from a blend of carboxymethyl chitosan (CMCS)/sodium alginate (SA) hydrogel (CSH), β-cyclodextrin/chlorhexidine clathrate (β-CD-CHX), and strontium-nanohydroxyapatite nanoparticles (Sr-nHA). The β-CD-CHX and Sr-nHA components were synthesized using a saturated aqueous solution and a coprecipitation method, respectively. Subsequently, these elements were encapsulated within the CSH matrix. Comprehensive characterization of the CMCS/SA/β-CD-CHX/Sr-nHA composite hydrogel scaffold via scanning electron microscopy, X-ray photoelectron spectroscopy, and Fourier-transform infrared spectroscopy validated the successful synthesis. The swelling and in vitro degradation behaviors proved that the composite hydrogel had good physical properties, while in vitro evaluations demonstrated favorable biocompatibility and osteoinductive properties. Additionally, antibacterial assessments revealed its effectiveness against common pathogens, Staphylococcus aureus and Escherichia coli. Overall, our results indicate that the CMCS/SA/β-CD-CHX/Sr-nHA composite hydrogel scaffolds exhibit significant potential for effectively treating infection-prone jaw defects.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Gels
·
2024
·Vol. 10
·期 6
·390
·
IF 5
Yanni Gao,Yuzhou Zhao,Ting Wang
Effective forest fire suppression remains a critical challenge, necessitating innovative solutions. Temperature-sensitive hydrogels represent a promising avenue in this endeavor. Traditional firefighting methods often struggle to address forest fires efficiently while mitigating ecological harm and optimizing resource utilization. In this study, a novel intelligent temperature-sensitive hydrogel was prepared specially for forest fire extinguishment. Utilizing a one-pot synthesis approach, this material demonstrates exceptional fluidity at ambient temperatures, facilitating convenient application and transport. Upon exposure to elevated temperatures, it undergoes a phase transition to form a solid, barrier-like structure essential for containing forest fires. The incorporation of environmentally friendly phosphorus salts into the chitosan/hydroxypropyl methylcellulose gel system enhances the formation of temperature-sensitive hydrogels, thereby enhancing their structural integrity and firefighting efficacy. Morphological and thermal stability analyses elucidate the outstanding performance, with the hydrogel forming a dense carbonized layer that acts as a robust barrier against the spread of forest fires. Additionally, comprehensive evaluations employing rheological tests, cone calorimeter tests, a swelling test, and infrared thermography reveal the multifaceted roles of temperature-sensitive hydrogels in forest fire prevention and suppression strategies.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2024
·
IF 7.7
Honglei Jiang,Shu Zhang,Yipan Chen,Fengshan Wang,Wenjie Jiang
Intranasal vaccination offers crucial protection against influenza virus pandemics. However, antigens, especially subunit antigens, often fail to induce effective immune responses without the help of immune adjuvants. Our research has demonstrated that a polyelectrolyte complex, composed of curdlan sulfate/ O -(2-hydroxyl) propyl-3-trimethyl ammonium chitosan chloride (CS/ O -HTCC), effectively triggers both mucosal and systemic immune responses when administrated intranasal. In this study, stable nanoparticles formed by curdlan- O -HTCC conjugate (C O NP) were prepared and characterized. Furthermore, the efficacy of C O NP was evaluated as a mucosal adjuvant in an intranasal influenza H1N1 subunit vaccine. The results revealed that C O NP exhibits uniform and spherical morphology, with a size of 190.53 ± 4.22 nm, and notably, it remains stable in PBS at 4 °C for up to 6 weeks. Biological evaluation demonstrated that C O NP stimulates the activation of antigen-presenting cells (APCs), including macrophages and dendritic cells (DCs), both in vitro and in vivo . Furthermore, intranasal administration of C O NP effectively elicits cellular and humoral immune responses, notably enhancing mucosal immunity. Thus, C O NP emerges as a promising mucosal adjuvant for influenza subunit vaccines.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Nano
·
2024
·
IF 15.8
Xiaoyu Chen,Ning Huang,Danyang Wang,Miao Zhang,Xuyang Deng,Fangze Guo,Bingcheng Yi,Changqing Yuan,Qihui Zhou
Periodontitis, a prevalent chronic inflammatory disease worldwide, is triggered by periodontopathogenic bacteria, resulting in the progressive destruction of periodontal tissue, particularly the alveolar bone. To effectively address periodontitis, this study proposed a nanoformulation known as CuS@MSN-SCS. This formulation involves coating citrate-grafted copper sulfide (CuS) nanoparticles with mesoporous silica (MSNs), followed by surface modification using amino groups and sulfated chitosan (SCS) through electrostatic interactions. The objective of this formulation is to achieve efficient bacteria removal by inducing ROS signaling pathways mediated by Cu2+ ions. Additionally, it aims to promote alveolar bone regeneration through Cu2+-induced pro-angiogenesis and SCS-mediated bone regeneration. As anticipated, by regulating the surface charges, the negatively charged CuS nanoparticles capped with sodium citrate were successfully coated with MSNs, and the subsequent introduction of amine groups using (3-aminopropyl)triethoxysilane was followed by the incorporation of SCS through electrostatic interactions, resulting in the formation of CuS@MSN-SCS. The developed nanoformulation was verified to not only significantly exacerbate the oxidative stress of Fusobacterium nucleatum, thereby suppressing bacteria growth and biofilm formation in vitro, but also effectively alleviate the inflammatory response and promote alveolar bone regeneration without evident biotoxicity in an in vivo rat periodontitis model. These findings contribute to the therapeutic effect on periodontitis. Overall, this study successfully developed a nanoformulation for combating bacteria and facilitating alveolar bone regeneration, demonstrating the promising potential for clinical treatment of periodontitis.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
RSC Advances
·
2024
·Vol. 14
·期 4
·2410-2421
·
IF 3.9
Haixia Wu,Wang Shen,Quanfa Zhao,Weiwei Zhang
As a typical type of organic flocculant, chitosan is limited by its poor water solubility and narrow pH range application. Grafting modification can improve chitosan's solubility and availability through linking macromolecular chains with other types of water-soluble groups or functional side groups. In this study, dielectric barrier discharge (DBD) was used to active the surface of chitosan, then activated chitosan was polymerized with acrylamide to synthesize a chitosan-based flocculant, chitosan-acrylamide (CS-AM). During the synthesis of CS-AM, the optimal conditions were determined as follows: discharge time of 5 min, discharge power of 60 W, total monomer mass concentration of 80 g L−1, polymerization time of 3 h, polymerization temperature of 70 °C, and m(CS) : m(AM) ratio of 1 : 3. The structure and morphological characteristics of CS-AM were investigated and analyzed by Fourier transform infrared (FTIR) spectroscopy, X-ray photoelectron spectroscopy (XPS), thermogravimetric (TG) analysis, scanning electron microscopy (SEM), X-ray diffraction (XRD) and N2 physical adsorption, respectively. The removal efficiency of kaolin suspension and CNTs suspension can reach up to 95.9% and 90.2% after flocculation of CS-AM. Furthermore, the zeta potential of the supernatant from the CS-AM treated kaolin suspension at different pH values was examined, and the flocculation mechanism of CS-AM was analyzed. This study provides new ideas for the preparation and development of modified chitosan and broadens its application in water treatment.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2025
·
IF 8.5
Ning Li,Chang Liu,Li Niu,Xu Li,Jacko Feng,Zhiming Liu
In this study, we examined the plasticizing effects of 1-butyl-3-Methylimidazolium Chloride (BmimCl), glycerol, and their combination on chitosan (CS) films. Additionally, we examined the effect of plasticizers for chitosan films structure and physicochemical properties of CS films by FTIR, XRD, SEM and mechanism of action of plasticizers on the structure of CS films. The results indicated that the interaction between BmimCl and chitosan is mainly ionic interaction and hydrogen bonding, while the interaction between glycerol and CS is mainly hydrogen bonding. The utilization of a 1:1 mixture of BmimCl and glycerol as a plasticizer exhibits a synergistic impact on the film samples. In dry conditions, the elongation at break of the CS/BmimCl 0.5 /Gly 0.5 film reached 17.47 %, representing a 33 % and 78 % increase compared to the CS/BmimCl and CS/Gly films, respectively. In moist environments, the mechanical strength of CS/BmimCl 0.5 /Gly 0.5 film was significantly enhanced to 35.09 MPa compared to the CS/BmimCl and CS/Gly films. Notably, the elongation at break of the films remained at 37.05 %, without compromising their flexibility properties.
✓ 已验证
产品关联
DOI
PubMed
高影响因子