INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2023
·
IF 7.2
Meng Huo,Xiaowan Peng,Jin Zhao,Qiuwei Ma,Run Cai,Chun Deng,Bei Liu,Changyu Sun,Guangjin Chen
Using ionic liquids to capture CO to produce high-purity hydrogen (H 2 ) is a promising method. However, there is a lack of theoretical screening for CO capture, which can reduce the number of experiments and costs. In addition, ionic liquids need to reduce their viscosity and maintain an excellent CO capture effect. Therefore, The COSMO-RS was used to screen 300 ionic liquids using CO/H 2 selectivity and viscosity at 293.15 K as indicators. The results showed that the target ionic liquid screened was [EimH][CuCl 2 ]. The addition of ethylene glycol (EG) reduced the viscosity of [EimH][CuCl 2 ] and improved the CO capture ability. After adding 25 wt% EG, its separation factor of CO/H 2 could reach 180 at 293.15 K and 2.1 MPa, which was 59% higher compared to the pure ionic liquid. Furthermore, EG inhibits foaming, and the mixed solvent could maintain high stability after recycling.
✓ 已验证
产品关联
DOI
高影响因子
MATERIALS RESEARCH BULLETIN
·
2023
·
IF 5.4
Suqiong Xu,Zhiqian Yao,Xianke Zhang,Jujun Yuan,Chuicai Rong,Zuzhou Xiong,Xiurong Zhu,Yi Yu,Huajun Yu,Shuying Kang,Fangguang Kuang
In this paper, Prussian blue analogues (PBAs) with different morphologies have been synthesized in a co-precipitation process with Na 3 C 6 H 5 O 7 ·2H 2 O and polyvinyl pyrrolidone (PVP) as surfactant, and then the electromagnetic wave absorption (EMWA) properties of their derivatives obtained via a pyrolysis reaction were investigated. To explore the best suitable pyrolysis temperature, PBA precursor synthesized via the addition of Na 3 C 6 H 5 O 7 ·2H 2 O was annealed at four different temperatures (550/650/750/850 °C) to obtain the cobalt encapsulated in nitrogen-doped carbon nanotube (Co@NCNT) nanocomposites. Our results show that when the pyrolysis temperature is 650 °C, the Co@NCNT shows a minimum reflection loss (RL min ) of - 43.95 dB at the thickness of 2.05 mm, and the effective absorption bandwidth reaches 5.695 GHz, spanning the X and Ku bands. The excellent EMWA property is ascribed to the synergistic effect of dielectric and magnetic loss.
✓ 已验证
产品关联
DOI
高影响因子
ChemistrySelect
·
2023
·Vol. 8
·期 13
·e202300298
·
IF 2.1
Hong Du,Jing Zheng,Yi Mao,Wen-tao Pan,Yan Zhang,Lin-yu Zhu,Xue-Bo Yin,Min Zhang
Graphical Herein, magnetic Nitrogen-doped carbon microtubes with Co nanoparticles (Fe 3 O 4 @C−Co) were prepared. The obtained Fe 3 O 4 @C−Co exhibited an excellent catalytic performance due to the synergistic effect between the hollow porous nitrogen-doped carbon support and the dispersed Co nanoparticles. Furthermore, owing to the magnetism of the magnetic Fe 3 O 4 NPs and newly-generated Co NPs, the catalysts could be easily collected and recycled, exhibiting potential application in catalytic and other fields. Heterogeneous catalysts with controllable interface structures are of great importance to demonstrate the relationship between structure and property. Herein, magnetic Nitrogen-doped carbon microtubes with Co nanoparticles (Fe 3 O 4 @C−Co) were prepared, which could be used for the reduction of 4-nitrophenol(4-NP). In the process, MoO 3 @FeOOH core-shell structure was fabricated, then ZIF-67 was decorated on the MoO 3 @FeOOH. After adding 2-methylimidazole, MoO 3 microrods were removed. Then the prepared FeOOH@ZIF-67 microtubes are converted to Fe 3 O 4 @C−Co hybrid microtubes through pyrolysis. Due to the unique structures, the obtained Fe 3 O 4 @C−Co composites improved the dispersion of Co nanoparticles (NPs), diminished Co leaching, and promoted catalytic activity. The plentiful nitrogen improved electronic conductivity and brought additional active sites. The resulting Fe 3 O 4 @C−Co implies outstanding catalytic ability towards the reduction of 4-NP. The synergistic effect between the hollow microtube and the fine dispersed Co NPs within Fe 3 O 4 @C−Co offered an excellent catalytic efficiency. More particularly, this achievement opens a new avenue to the targeted design of well-defined nanocatalysts for practical applications in environmental remediation.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2023
·
IF 15.1
Xuan Miao,Binbin Wang,Huitao Fan,Peng Zhang,Shiqiang Bai,Weisheng Liu
Semiconducting photocatalysts' electronic configuration significantly impacts their band gaps, charge carrier transport properties, and photocatalytic activities. Boron-doped tremella-like hierarchical CN and ultrathin Co phthalocyanine (CoPe) heterojunction (B 1.5 HCN-Co 0.5% ) formation via strengthened H-bonding interfacial connection possess excellent photocatalytic activities in water where the small amounts of catalysts exhibit a high photocatalytic H 2 evolution activity with H 2 evolution rate of 17818.82 μmol h −1 g −1 under simulated sunlight and 5558.81 μmol h −1 g −1 under visible light (≥420 nm). According to detailed characterization, the unique tremella-like hierarchical structure with abundant mesopores shortens the charge diffusion length. At the same time, incorporating CoPe improves the charge transport properties of B 1.5 HCN achieving effective spatial separation, which is primarily responsible for the improved performance. Both a significant amount of experimental data and theoretical calculations demonstrated the critical role of boron-doped and CoPe in photocatalytic H 2 evolution. Heteroatom doping and heterojunction construction are essential in rationally regulating band structure to construct more efficient CN-based photocatalysts.
✓ 已验证
产品关联
DOI
高影响因子
ACS Nano
·
2023
·
IF 17.1
Wanbing Gong,Xin Mao,Jifang Zhang,Yue Lin,Haimin Zhang,Aijun Du,Yujie Xiong,Huijun Zhao
In theory, electrocatalysts in their metallic forms should be the most stable chemical state under cathodic potentials. It is known that the highly dispersed nanoparticle (NP) types of electrocatalysts often possess higher activity than their bulk counterparts. However, facilely and controllably fabricating well-dispersed nonprecious metal NPs with superior electrocatalytic activity, selectivity, and durability is highly challenging. Here, we report a facile reductive pyrolysis approach to controllably synthesize NiCo alloy NPs confined on the tip of N-doped carbon nanotubes (N-CNTs) from a bimetal-MOF precursor. The electrocatalytic performance of the resultant NiCo@N-CNTs are evaluated by a wide spectrum of nitroarene reductive coupling reactions to produce azoxy-benzenes, a class of precious chemicals for textile, food, cosmetic, and pharmaceutical industries. The superior electrocatalytic stability, full conversion of nitroarenes, >99% selectivities, and >97% faradic efficiencies toward the targeted azoxy-benzene products are readily attainable by NiCo@N-CNTs, attributable to the alloying-induced synergetic effect. The presence of a CNT confinement effect in NiCo@N-CNTs induces high stability. This added to the metallic states of NiCo empowers NiCo@N-CNTs with excellent electrochemical stability under reductive reaction conditions. In an effort to enhance the energy utilization efficiency, we construct a NiCo@N-CNTs||Ni(OH)2/NF two-electrode electrolyzer to simultaneously reduce nitrobenzene at the cathode and 5-hydroxymethylfurfural with >99% yields for both azoxy-benzene and 2,5-furandicarboxylic acid.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Polymers
·
2022
·Vol. 14
·期 24
·5419
·
IF 4.967
Puyu Jin,Aimin Pang,Rongjie Yang,Xiaoyan Guo,Jiyu He,Jinxian Zhai
To improve the mechanical properties of polyurethane cross-linked poly (ethylene oxide-co-tetrahydrofuran) (P(E-co-T)) elastomers at room temperature, using poly (ethylene oxide-co-tetrahydrofuran) and high-molecular-weight polyethylene glycol (PEG) as raw materials and polyisocyanate N100 as curing agent, a series of polyurethane cross-linked blended polyether elastomers were prepared by changing the elastomer-curing parameter R value (n(-NCO)/n(-OH)) and P(E-co-T)/PEG ratio. Equilibrium swelling measurements showed that the chemical cross-linkage of the elastomers tended to decrease with the decreasing R value, the average molecular weight (Mc) of the network chain increased, and the density of the network chain (N0) decreased. Wide-angle X-ray diffraction (WAXD) and differential scanning calorimetry (DSC) tests showed that PEG chain segments within the elastomers crystallized at room temperature, while the crystallinity increased with decreasing R value and increasing PEG content. The mechanical property tests showed that the elongation at break tended to decrease with increasing R value; the tensile strength first increased and then decreased. At R value 0.9, the elastomer presented good comprehensive mechanical properties. In addition, the mechanical properties of polyurethane cross-linked P(E-co-T)/PEG blended polyether elastomer showed an increasing trend with the increase in PEG content when the curing parameter of 0.9 remained unchanged.Keywords:polyurethane cross-linked elastomer;polyether blend;crystallinity;mechanical properties
✓ 已验证
产品关联
DOI
PubMed
高影响因子
SENSORS AND ACTUATORS A-PHYSICAL
·
2022
·
IF 4.291
Dawu Lv,Wenfeng Shen,Weigang Chen,Yuheng Wang,Ruiqin Tan,Meng Zhao,Weijie Song
Developing low-cost and high-performance ammonia sensors is significant to the current air pollution control and non-invasive diagnosis of human diseases. In this work, in situ polymerization of poly(aniline-co-pyrrole) (PAPY) is on flexible porous polyvinylidene fluoride (PVDF)-based sensitive membrane (PAPYP). Based on the adjustment of the poly(aniline-pyrrole) copolymer backbone structure and the dual role of the porous substrate , the sensor exhibited excellent ammonia gas sensing performance. The response of the PAPYP sensor to 1 ppm NH 3 at room temperature was improved to 93%. It has a low detection concentration of 0.05 ppm for NH 3 . In addition, the PAPYP sensor has excellent long-term stability and outstanding flexibility. Finally, based on the low-temperature working environment of the sensor, we analyzed and discussed the influence of relative humidity and temperature on the gas-sensing characteristics of the PAPYP sensor to realize error correction in practical applications. This study provides commercial application potential for ammonia concentration detection related to human health.
✓ 已验证
产品关联
DOI
高影响因子
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH
·
2023
·Vol. 30
·期 16
·48389-48400
·
IF 5.8
Zhao Huanxin,Chen Wenkai,Wu Dan,Liu Xinyue,Hu Wanjie,Zhang Xuejun
Although heterogeneous cobalt-based catalysts have been widely studied and used in SO 4 •− based advanced oxidation processes, the efficiencies were still not high enough due to the limiting step of Co(III)/Co(II) cycle in the system. In this study, a bimetallic oxide composed of Co and Mo was designed and used for enhancing the performance of peroxymonosulfate activation on organic pollutants removal. The CoMoO 4 nanorods exhibited superior catalytic activity for methylene blue (MB) degradation than Co 3 O 4 , MoO 3 , and their mechanical mixture, which was attributed to the synergetic effect between Co and Mo. CoMoO 4 nanorods were able to efficiently degrade MB under a wide pH range of 3–11 and could maintain high efficiency in 5 cycles with less leakage of metal ions. Moreover, CoMoO 4 nanorods displayed broad spectrum applicability to the different water matrix and a variety of pollutants such as phenol and Congo red. The Co(II) was proved to be the main active site of the catalyst, while Mo played an important role in promoting the Co(III)/Co(II) cycle. Surface free radicals are the main active species in the degradation process. This work provides new insights into the design of cobalt-based bimetallic catalyst and the improvement on PMS activation.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Energy Chemistry
·
2023
·
IF 13.1
Zhongying Fang,Ziwei Zhang,Shemsu Ligani Fereja,Jinhan Guo,Xinjie Tong,Yue Zheng,Rupeng Liu,Xiaolong Liang,Leting Zhang,Zongjun Li,Wei Chen
Direct formic acid fuel cell (DFAFC) is an important research project in clean energy field. However, commercialization of DFAFC is still largely limited by the available catalysts with unsatisfied activity, durability and cost for formic acid electrooxidation (FAEO). Using Pt- and Pd-based nanoclusters as electrocatalysts is a particularly promising strategy to solve the above problem, but two attendant problems need to be solved firstly. (I) The controllable synthesis of practicable and stable sub-2 nm clusters remains challenging. (II) The catalyzing mechanism of sub-2 nm metal clusters for FAEO has not yet completely understood. Herein, different from traditional solution synthesis, by designing a novel supporting material containing electron-rich and electron-deficient functional groups, size- and dispersion-controllable synthesis of ∼1 nm PtPd nanoclusters is realized by an electrochemical process. The electrocatalytic properties and reaction mechanism of the PtPd nanoclusters for the FAEO were studied by different electrochemical techniques, in-situ fourier transform infrared (FTIR) spectra and density functional theory (DFT) calculations. The tiny PtPd nanoclusters have much higher catalytic activity and durability than commercial Pt/C, Pd/C and 3.5 nm PtPd nanoparticles. The present study shows that the metal-reactant interaction plays a decisive role in determining the catalytic activity and cluster-support interaction plays a decisive role in enhancing the durability of electrocatalyst. The ratio and arrangement of Pt and Pd atoms on the surface of 1 nm PtPd cluster as well as the overall valence state, d-band center and specific surface area make them exhibit different catalytic performance and reaction mechanism from nanoparticle catalysts. In addition, in situ FTIR and DFT calculations showed that on the surface of PtPd clusters, the generation of CO 2 through trans-COOH intermediate is the most optimal reaction pathway for the FAEO.
✓ 已验证
产品关联
DOI
高影响因子
ChemElectroChem
·
2023
·Vol. 10
·期 3
·e202201087
·
IF 4
Shaojie Gao,Ping Li,Yao Shi,Yi He,Lecheng Lei,Shaoyun Hao,Xingwang Zhang
Graphical Better with defects : A ternary alloy PtCoMo nanocatalyst with dual surface Co and Mo vacancy defects was used as an efficient electrocatalyst for acidic oxygen reduction reaction for fuel cell applications. Proton exchange membrane fuel cell (PEMFC) is considered as the most promising energy conversion technology, which is hampered by the unsatisfied activity and high loading of Pt. The performance of Pt-based catalyst toward PEMFC depends on the surface bond length of Pt−Pt, which is closely related to the surface defect engineering. Here we firstly present a ternary alloy PtCoMo nanocatalyst with dual surface Co and Mo vacancy defects (V Co−Mo −PtCoMo) that compressed the Pt−Pt bonds, thus exhibiting an outstanding activity toward oxygen reduction reaction (ORR) with a mass activity of 0.57 A mg Pt −1 at 0.9 V (RHE, reversible hydrogen electrode), which is 5.2 times higher as compared with commercial Pt/C (20 wt %) in 0.1 M HClO 4 . The characterizations and density functional theory calculations demonstrate that the Pt−Pt bonds are significantly compressed through the dual surface defects, thus weakening the binding energy and effectively enhancing the acidic ORR performance.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF LUMINESCENCE
·
2022
·
IF 4.171
Zuodong Liu,Qilong Shen,Yue Cao,Siya Li,Xue Chen,Jiashun Wang,Yongsheng Yu,Bingchu Mei,Qiangshan Jing,Peng Liu
Pr, La:SrF 2 ceramics co-doped with various amounts of LaF 3 were fabricated by hot-pressing (HP) sintering in a vacuum environment. The transmittance of the Pr, La:SrF 2 ceramics was gradually improved with the increase in sintering temperature , and the sintering temperature of 1000 °C was adequate to fabricate highly transparent ceramics without rapid grain growth. Residual pores and undissolved PrF 3 /LaF 3 fluorides were identified as light scattering defects within the ceramic sintered at 830 °C. The effect of LaF 3 on the microstructural, transmittance, and spectroscopic characteristics of ceramics was studied systematically. The luminescence intensity of the Pr, La:SrF 2 ceramics was drastically enhanced through LaF 3 co-doping, while the optical transmittance first slightly increased and then decreased. The ceramic sample co-doped with 1 wt% LaF 3 exhibits the highest transmittance with the smallest grain size of 43.4 μm, and the transmittance reaches 87.8% at 400 nm and 87.2% at 1100 nm.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF RARE EARTHS
·
2023
·
IF 4.9
Bolang Li,Fei Wang,Kai Li,Ping Ning,Min Chen,Changbin Zhang
The chemical transformation of CO 2 produces carbon compounds that can be used as precursors for the production of chemicals and fuels. Here, we investigated the activity and selectivity of the transition metals (Fe, Co, and Ni) supported on CeO 2 catalyst for CO 2 hydrogenation at atmospheric pressure. We found that Ni/CeO 2 shows the highest CO 2 conversion compared with Fe/CeO 2 and Co/CeO 2 . Besides, Co/CeO 2 and Ni/CeO 2 exhibit nearly 100% CH 4 selectivity while Fe/CeO 2 inclines to produce CO. The characterization results show that the metal-support interaction order is Fe/CeO 2 > Co/CeO 2 > Ni/CeO 2 , the weak metal-support interaction over Ni/CeO 2 benefits the activation of H 2 and then promotes the activity of CO 2 hydrogenation. Additionally, in situ DRIFTS results demonstrate that monodentate formate species rather than bidentate formate are the active intermediates. The main route of CO 2 hydrogenation to CH 4 is that CO 2 is firstly transformed to m-HCOO∗ and then direct hydrogenation of the m-HCOO∗ to CH 4 . This study provides insights into the understanding of the mechanisms of CO 2 hydrogenation on CeO 2 based catalysts.
✓ 已验证
产品关联
DOI
高影响因子