Journal of Environmental Chemical Engineering
·
2023
·
IF 7.7
Meiling Chen,Lin Ding,Shijun Zhu,Xiuqin Xiong,Xinkai Yuan,Yanhua Peng,Liming Yang,Hui Shi,Penghui Shao,Xubiao Luo
The slow Fe(II)/Fe(III) cycle during the Fenton reaction process strongly impedes oxidation efficiency in practical applications. In this study, an activated carbon (AC) assisted Fenton reaction system was used to treat electroplating wastewater containing Ni-ethylenediaminetetraacetic acid (Ni-EDTA). AC was found to enhance the removal of Ni-EDTA in Fenton/Fenton-like reactions. The reported results revealed that AC could effectively promote the regeneration of Fe(II) from Fe(III) species via electron transfer to improve the reaction rather than directly enhancing the H 2 O 2 decomposition to accelerate the production of hydroxyl radicals (•OH). Quenching experiments and EPR also demonstrated that •OH and •O 2 − took part in the radical oxidation process, in which the contribution of •OH was dominant. XPS and FT-IR analysis further confirmed that the carbonyl group (C O) on the surface of AC could indeed act as the dominant active site and an electron donor to directly reduce Fe(III). In addition, electrochemical tests indicated that AC could increase the oxidation potential of Fe(III) to boost the reaction between Fe(III) and H 2 O 2 , thus enabling the transfer of electrons from H 2 O 2 to Fe(III) to facilitate the Fe(II)/Fe(III) cycle. This study might contribute to a new insight into the mechanisms of AC-catalyzed Fenton oxidation processes for the decomplexation heavy metal-EDTA.
✓ 已验证
产品关联
DOI
高影响因子
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
·
2023
·
IF 4.2
Jie Ding,Zisu Xu,Hongjun Fang,Xinzhen Feng,Weijie Ji
The aim of this study is to achieve a high fraction of monoene in biomass-derived cardanol to manipulate a well-balanced potential of cross-linking and coupling between resin and curing agent for heavy-duty coating. We reported a heterogeneous nonprecious trimetallic catalyst for selective hydrogenation of polyenes in cardanol for the first time. By cointroducing the second and third metal constituents (Cu and Co), and particularly facet controlling as well as Zn doping of Al2O3 substrate, we can accomplish the highly selective hydrogenation of triene/diene into monoene with variable ratio. The larger sized Ni entities with higher electron density on the Al2O3 hexagonal plates are more favorable for activating triene/diene responsible for a high potential of selective hydrogenation. On the other hand, the Ni0 fraction is comparatively lower, while the mean particle size of Ni0 is the smallest with lower electron density on the commercially obtained γ-Al2O3 spherules. The latter kind of Ni entities is more favorable for activating hydrogen to generate highly reactive H species accounting for a strong potential of full hydrogenation. Over a fine-tuned 10% Ni-5% Co-3% Cu/3% Zn-Al2O3-hexagonal plate under the optimized conditions (7.5% cardanol in n-butanol, 2.5 MPa H2, 80 °C, and 3.5 h), as high as 76% monoene can be obtainable. It is worth noting that not only the current catalyst system is more economic but also the reaction becomes kinetically much faster (within 3.5 h). This catalyst system is operational to a large-scale application in the modification of cardanol via selective hydrogenation. Ni–Co–Cu synergism and low-content Zn modification of the Al2O3 (110) facet are essential to achieve the aim of this study.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF PHYSICS AND CHEMISTRY OF SOLIDS
·
2023
·
IF 4
Zong-Bao Yu,Zhuozhuo Song,Peng Zheng,Jie Sun,Zhanxu Yang
Transition metal sulfides (TM sulfides) has long been regarded as highly promising materials for catalyzing oxygen evolution reaction (OER). The function of TM sulfides in OER occurs on TM oxyhydroxide and SO 4 2− , which are formed through surface reconstruction under certain potentials. It is worth noting that the impact of SO 4 2− on the local charge distribution among atoms, a crucial determinant of OER performance, has been insufficiently studied. This study aims to investigate the role of SO 4 2− in mediating the partial redistribution of charges among Co, Ni and O atoms on a precatalyst Co 9 S 8 /C–Ni(OH) 2 electrode. The electrode undergoes self-reconstruction to form a CoOOH/SO 4 2− /NiOOH structure on its surface that is active for the OER. The results demonstrate that SO 4 2− facilitates the local charge redistribution of active atoms, leading to optimized adsorption energy of OER intermediates and increased redox center of the material. Furthermore, SO 4 2− serves as an electron mediator in the OER process under varying applied voltages. Consequently, CoOOH/SO 4 2− /NiOOH achieves a Tafel slope of 56 mV dec −1 , an overpotential of 250 mV, and maintains a high stability for over 100 h at a current density of 20 mA cm −2 . Overall, this research provides valuable insights into catalytic reaction mechanisms and the design of efficient composite catalysts.
✓ 已验证
产品关联
DOI
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2023
·
IF 5.2
Huilian Zhou,Siming Yan,Yi He,Yi Fan,Liping Yan,Xinyu Cheng,Zhiyuan Li,Jiamin Zhong,Jinxue Song
The two-step method limits the large-scale production of superhydrophobic coatings, while low hardness limits the practical application of superhydrophobic coatings. In this study, silane-modified SiO 2 nanomaterials (SH-SiO 2 ) were prepared first and then superhydrophobic coatings were prepared by one-step electrodeposition by adding modified materials. In addition, the nonwetting properties, microhardness , mechanical stability and corrosion resistance of pure Ni coatings, Ni/SiO 2 coatings, and Ni/SH-SiO 2 coatings were compared. The contact angle test shows that the water contact angle (WCA) of the Ni/SH-SiO 2 coating can reach 153.858°. The microhardness test shows that the addition of SH-SiO 2 can effectively improve the microhardness of the coating and the microhardness of the Ni/SH-SiO 2 coating is increased by 76.14% relative to the Ni coating. When the abrasion length reaches 1000 mm, the change of the water contact angle of the Ni/SH-SiO 2 coating is kept within 5%, which helps to further promote the practical application of superhydrophobic coatings. Electrochemical impedance spectroscopy tests were used to comprehensively evaluate the corrosion resistance of the coating. The results showed that in a 3.5 wt% NaCl solution, the impedance of the Ni/SH-SiO 2 coating is an order of magnitude increase over the other two coatings. Overall, the Ni/SH-SiO 2 coatings have excellent corrosion resistance, good hardness and hydrophobicity , and their simple preparation method has positive implications for the large-scale production of superhydrophobic coatings.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Materials Research and Technology-JMR&T
·
2023
·
IF 6.4
Sijie Liu,Renda Wang,Li Wang,Fangfang Ge,Mengyu Gao,Yang Si,Bingsheng Li
In this work, static immersion and gravimetric methods were used to study the corrosion behavior of three common stainless steels and four Ni-based alloys in a NaCl–MgCl 2 –KCl mixed molten salt under vacuum atmosphere. The corrosion test was conducted at 700 °C, with a maximum exposure time of 100 h. Corrosion behavior was determined by measuring the mass loss of the sample at different time intervals and the corrosion rates at 100 h. The microstructure of the alloy was analyzed by scanning electron microscopy (SEM), energy dispersive spectroscopy (EDS), atomic force microscope (AFM), and X-ray diffraction (XRD). The results showed that stainless steels were generally more severely corroded than Ni-based alloys. 304 stainless steel and In800H exhibited the worst corrosion resistance, whereas Ni-based alloy In625 had the best corrosion resistance. Fe and Cr were dissolved in the molten chloride salts and reacted with the molten chloride salts. Mo played a positive role in suppressing the corrosion of the alloys in molten chloride salts by inhibiting the outward diffusion of the elements.
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2023
·
IF 7.2
Na Yang,Wei Yang,Xiaodong Yang,Xiaoming Xiao,Longfei Zhang,Luhong Zhang
Morphological design and interfacial engineering are pivotal strategies for advancing electrocatalysis , however, achieving the optimization of both simultaneously remains a major challenge. To address this, we designed a multi-heterostructured bifunctional electrocatalyst cobalt-nickel-iron-phosphorus-sulfur composite (CoNiFe-PS) with a two-dimensional/three-dimensional (2D/3D) hierarchical structure, which was synthesized through simultaneous phosphating and sulfuration based on cobalt-nickel layered double hydroxide (CoNi-LDH) nanosheets grafted with Prussian blue analogue (PBA) nanocubes. Notably, due to the distinctive morphology and synergistic effect between multi-heterostructure, the CoNiFe-PS catalyst demonstrated excellent performance in terms of ultralow overpotentials of 196 and 263 mV for oxygen evolution reaction (OER), as well as 63 and 235 mV for hydrogen evolution reaction (HER) at current densities of 10 and 100 mA cm −2 . Moreover, the CoNiFe-PS|| CoNiFe-PS cell was constructed for overall water splitting in alkaline condition and exhibited minimal voltage requirements of 1.479 and 1.693 V to achieve 10 and 100 mA cm −2 , respectively. This study provides a new perspective on fabricating multi-heterostructured bifunctional catalysts with unique morphology for highly efficient overall water splitting.
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2023
·
IF 7.2
Tao Yu,Ruqiu Ding,Fan Quan,Zhiyuan Ni,Xuanwen Liu,Yan He,Wenning Mu,Xuefei Lei,Yuhan Mo
The development of high activity catalysts with excellent durability is a great challenge to realize the industrialization of electrolytic water oxygen evolution. In this work, Ag nanoparticles modified cross column nickel-iron hydroxyl oxide system (NiFeAg) nanocomposites were synthesized by a two-step strategy. Through XPS spectrum, Tafel slope, and EIS electrochemical impedance spectroscopy, it was found that Ag mainly plays a conductive role, accelerates charge transfer, and adjusts the surface electronic structure, to improve the activity of the catalyst. Impressive is the overall hydrolysis performance, with a current density of 10 mA cm −2 achieved at an overpotential of 211 mV, which shows better performance than other catalysts reported in the literature. Finally, through the theoretical calculation of the determination steps of adsorption energy and rate of oxygen-containing intermediates, it is determined that the active center of the catalyst is mainly Ni site. According to the theory of D-band center, Ag can effectively adjust the D-band center, thereby adjusting the adsorption strength of Ni sites on the surface of NiFe catalyst to adsorbent, and finally improving the OER performance of the catalyst.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2023
·
IF 15.1
Zilong Zhao,Yatao Ren,Shuyu Qi,Zigong Ning,Xing Wang,Wenyi Dong,Hongjie Wang
Heavy metal complexes pose a challenge in terms of their resistance to removal due to their stable and intricate structure. In this study, we explored the utilization of Fe and N co-doped biochar derived from rice husk (Fe-N-RHBC) as catalytic particle electrodes in a three-dimensional electro-Fenton (3D-EF) system for the decomplexation and removal of a model pollutant, Ni-EDTA. The characterization analysis and comparison of catalytic activities confirmed the beneficial effects of Fe and N co-doping on various aspects, such as the types of active sites, interfacial electron transfer properties, and H 2 O 2 decomposition capacity. Compared to other investigated oxidation systems, the 3D-EF process demonstrated rapid removal of Ni-EDTA within the initial minute, with a maximum H 2 O 2 utilization of 99.1% after 30 min. The prepared catalytic particle electrodes exhibited high stability and catalytic capacity even after three consecutive cycles. Throughout the reaction, several processes, including anode oxidation, particle electrode polarization, catalysis, and adsorption of Fe-N-RHBC, as well as cathodic electro-deposition, synergistically contributed to the treatment of Ni-EDTA. The surface-bound O 2 − radicals and 1 O 2 generated by the Fe-N-RHBC catalytic particle electrode played a crucial role in the decomplexation and removal of Ni-EDTA. Building upon these findings, we further proposed potential mechanisms for the removal of Ni-EDTA in the 3D-EF system using the Fe-N-RHBC catalytic particle electrode.
✓ 已验证
产品关联
DOI
高影响因子
TALANTA
·
2023
·
IF 6.1
A. Ravikumar,S. Kavitha,Amutha Arul,P. Rajaji,Tamilselvan G,Xuesong Li,Beibei Wu,Velappa Jayaraman Surya,Jun Tang,Yuvaraj Sivalingam,Zhen Zhang
The rational development of efficient nanozymes for the colorimetric detection of targets is still challenging. Herein, Prussian blue analogues of Ni–Co–MoS 2 nano boxes were fabricated for colorimetric detection of glyphosate and copper ions owing to its peroxidase like activity. At the sensing system, the Ni–Co–MoS 2 nano boxes display high peroxidase activity, which could catalytically oxidize the colourless TMB to blue colour oxTMB. In presence of glyphosate in this sensing system the blue colour is diminished, ascribed to the inhibit the catalytic activity of Ni–Co–MoS 2 nano boxes. Concurrently, the addition of copper ion, which result in blue colour was reappear due to the generation of glyphosate-copper complex formation. The Ni–Co–MoS 2 nano boxes based colorimetric sensing platform was developed to sensitive detection of glyphosate and copper ions with low detection limit of 3 nM for glyphosate and 3.8 nM for copper. This method also displays satisfactory outcomes from real samples analysis and its good accuracy. Therefore, this work provides a great potential for rapid detection of the targets from the environments.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2023
·
IF 22.1
Bin Chen,Zining Zhou,Yuze Li,Kok Bing Tan,Youting Wang,Xiaoping Rao,Jiale Huang,Xiaodong Zhang,Qingbiao Li,Guowu Zhan
Herein, biomass-derived activated carbon (bio-AC) was synthesized using rice husk as a biotemplate and natural carbon source. After immobilization of Ni, the supported Ni/bio-AC showed excellent catalytic activity in the pyrolysis of fatty acids to paraffin-based biodiesel in H 2 -free and solvent-free conditions, corresponding to the conversion of 99.6% and a total alkane yield of 95.1%, including 88.9% heptadecane. Based on comprehensive characterizations, the calculated turnover frequency of Ni/bio-AC was 3.9 times that of conventional Ni/AC. Significantly enhanced olefin selectivity was further obtained by N-doping of Ni/bio-AC, which was attributed to the inhibition of -COO* dissociation by the Ni-N sites. The possible catalytic reaction pathways from stearic acid to heptadecane via aliphatic alcohol as a reaction intermediate were investigated. Besides, efficient conversions of saturated and unsaturated plant oils were also achieved over Ni/bio-NAC catalysts in Py-GC/MS through pulsed catalytic pyrolysis manner, showing a promising prospect for sustainable biofuels and chemical production.
✓ 已验证
产品关联
DOI
高影响因子
Biosensors-Basel
·
2023
·Vol. 13
·期 5
·508
·
IF 5.4
Ya Yang,Wenhui Ji,Yutao Yin,Nanxiang Wang,Wanxia Wu,Wei Zhang,Siying Pei,Tianwei Liu,Chao Tao,Bing Zheng,Qiong Wu,Lin Li
Rapid and accurate detection of changes in glucose (Glu) and hydrogen peroxide (H2O2) concentrations is essential for the predictive diagnosis of diseases. Electrochemical biosensors exhibiting high sensitivity, reliable selectivity, and rapid response provide an advantageous and promising solution. A porous two-dimensional conductive metal–organic framework (cMOF), Ni-HHTP (HHTP = 2,3,6,7,10,11-hexahydroxytriphenylene), was prepared by using a one-pot method. Subsequently, it was employed to construct enzyme-free paper-based electrochemical sensors by applying mass-producing screen-printing and inkjet-printing techniques. These sensors effectively determined Glu and H2O2concentrations, achieving low limits of detection of 1.30 μM and 2.13 μM, and high sensitivities of 5573.21 μA μM−1cm−2and 179.85 μA μM−1cm−2, respectively. More importantly, the Ni-HHTP-based electrochemical sensors showed an ability to analyze real biological samples by successfully distinguishing human serum from artificial sweat samples. This work provides a new perspective for the use of cMOFs in the field of enzyme-free electrochemical sensing, highlighting their potential for future applications in the design and development of new multifunctional and high-performance flexible electronic sensors.Keywords:Ni-MOFs;paper-based sensors;electrochemical sensor;non-enzymatic catalysis;hydrogen peroxide;glucose
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Energy Chemistry
·
2023
·
IF 13.1
Fengyu Zhang,Yunna Guo,Chenxi Li,Tiening Tan,Xuedong Zhang,Jun Zhao,Ping Qiu,Hongbing Zhang,Zhaoyu Rong,Dingding Zhu,Lei Deng,Zhangran Ye,Zhixuan Yu,Peng Jia,Xiang Liu,Jianyu Huang,Liqiang Zhang
Ni-rich layered oxides are one of the most promising cathode materials for Li-ion batteries due to their high energy density. However, the chemomechanical breakdown and capacity degradation associated with the anisotropic lattice evolution during lithiation/delithiation hinders its practical application. Herein, by utilizing the in situ environmental transmission electron microscopy (ETEM), we provide a real time nanoscale characterization of high temperature solid-state synthesis of LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NCM811) cathode, and unprecedentedly reveal the strain/stress formation and morphological evolution mechanism of primary/secondary particles, as well as their influence on electrochemical performance. We show that stress inhomogeneity during solid-state synthesis will lead to both primary/secondary particle pulverization and new grain boundary initiation, which are detrimental to cathode cycling stability and rate performance. Aiming to alleviate this multiscale strain during solid-state synthesis, we introduced a calcination scheme that effectively relieves the stress during the synthesis, thus mitigating the primary/secondary particle crack and the detrimental grain boundaries formation, which in turn improves the cathode structural integrity and Li-ion transport kinetics for long-life and high-rate electrochemical performance. This work remarkably advances the fundamental understanding on mechanochemical properties of transition metal oxide cathode with solid-state synthesis and provides a unified guide for optimization the Ni-rich oxide cathode.
✓ 已验证
产品关联
DOI
高影响因子