APPLIED SURFACE SCIENCE
·
2022
·
IF 7.392
Zuqin Duan,Xue Wang,Richu Wei,Qian Lei,Honglin Chen
A facile novel B, N co-doped carbon was fabricated by high-temperature pyrolysis of a mixture of ethylenediamine tetraacetic acid disodium salt and boric acid, on which Pd nanoparticles were loaded to synthesize highly efficient Pd/BNC catalyst for dehydrogenation of formic acid. The type and content of N are regulated by the doping of B elements in carbon materials. The high content of N and B doping provides more anchor sites for Pd and strengthens the interaction between the support and Pd nanoparticles, thus forming highly dispersed Pd nanoparticles and regulating the electronic property of Pd. Therefore, the obtained Pd/BNC catalyst displayed enhanced performance (TOF = 2760 h −1 ) and a lower activation barrier (31.84 kJ/mol). Furthermore, the catalyst also exhibited wonderful cycling stability for hydrogen evolution from formic acid.
✓ 已验证
产品关联
DOI
高影响因子
Inorganics
·
2022
·Vol. 10
·期 12
·264
·
IF 3.149
Yangqin Gao,Guoqing Yang,Zhijie Tian,Hongying Zhu,Lianzheng Ma,Xuli Li,Ning Li,Lei Ge
The bare surface of BiVO4photoanode usually suffers from extremely low interfacial charge transfer efficiency which leads to a significantly suppressed photoelectrochemical water splitting performance. Various strategies, including surface modification and the loading of co-catalysts, facilitate the interface charge transfer process in BiVO4. In this study, we demonstrate that CoS2synthesized from the hydrothermal method can be used as a high-efficient co-catalyst to sufficiently improve the interface charge transfer efficiency in BiVO4. The photoelectrochemical water splitting performance of BiVO4was significantly improved after CoS2surface modification. The BiVO4/CoS2photoanode achieved an excellent photocurrent density of 5.2 mA/cm2at 1.23 V versus RHE under AM 1.5 G illumination, corresponding to a 3.7 times enhancement in photocurrent compared with bare BiVO4. The onset potential of the BiVO4/CoS2photoanode was also negatively shifted by 210 mV. The followed systematic combined optical and electrochemical characterization results reveal that the interfacial charge transfer efficiency of BiVO4was largely improved from less than 20% to more than 70% due tor CoS2surface modification. The further surface carrier dynamics study performed using an intensity modulated photocurrent spectroscopy displayed a 6–10 times suppression in surface recombination rate constants for CoS2modified BiVO4, which suggests that the key reason for the improved interfacial charge transfer efficiency possibly originates from the passivated surface states due to the coating of CoS2.Keywords:BiVO4;CoS2;photoelectrochemical water splitting;intensity modulated photocurrent spectroscopy;surface recombination
✓ 已验证
产品关联
DOI
高影响因子
Nanomaterials
·
2023
·Vol. 13
·期 3
·549
·
IF 5.3
Yang Yu,Wei Zhou,Cheng Li,Peigeng Han,Hui Li,Kun Zhao
Lead halide perovskites have achieved remarkable success in various photovoltaic and optoelectronic applications, especially solar cells and light-emitting diodes (LEDs). Despite the significant advances of lead halide perovskites, lead toxicity and insufficient stability limit their commercialization. Lead-free double perovskites (DPs) are potential materials to address these issues because of their non-toxicity and high stability. By doping DP nanocrystals (NCs) with lanthanide ions (Ln3+), it is possible to make them more stable and impart their optical properties. In this work, a variable temperature hot injection method is used to synthesize lead-free Tb3+-doped Cs2NaInCl6DP NCs, which exhibit a major narrow green photoluminescence (PL) peak at 544 nm derived from the transition of Tb3+ 5D4→7F5. With further Bi3+co-doping, the Tb3+-Bi3+-co-doped Cs2NaInCl6DP NCs are not only directly excited at 280 nm but are also excited at 310 nm and 342 nm. The latter have a higher PL intensity because partial Tb3+ions are excited through more efficient energy transfer channels from the Bi3+to the Tb3+ions. The investigation of the underlying mechanism between the intrinsic emission of Cs2NaInCl6NCs and the narrow green PL caused by lanthanide ion doping in this paper will facilitate the development of lead-free halide perovskite NCs.Keywords:lead-free double perovskite;lanthanide ion doping;Cs2NaInCl6;nanocrystals
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2023
·Vol. 34
·期 2
·1-9
·
IF 2.8
Shen Chang,Zhao Ye,Ji Xinran,Dong Shijun,Zheng Hui,Hu Ji,Zheng Liang
In this work, the electromagnetic of NiCuZn ferrite was enhanced and the sintering temperature was decreased by co-doped Bi 2 O 3 and Co 2 O 3 . The influence of the doping concentration of Co 2 O 3 on the microstructure and magnetic properties of NiCuZn ferrite was studied. Characterizations display that the high density and uniform microstructure of NiCuZn ferrite was obtained at a low sintering temperature of 925 °C. The Co ions were doped in the octahedral B-sites and decreased lattice constant and grain size. The resistivity was also improved after doping appropriate Co ions for the decrease of the Fe 2+ . The saturation magnetization, coercivity, permeability, and cut-off frequency were also enhanced after being doped with the Co 2 O 3 . Consequently, the NiCuZn ferrite doped with 0.30 wt% Bi 2 O 3 and 0.4 wt% Co 2 O 3 possesses a saturation magnetization of ~ 60.014 emu/g, coercivity of ~ 0.033 kA/m, real part of permeability of ~ 269.9 @ 1 MHz, and high cut-off frequency of 8.08 MHz, which can be applied in multi-layer chip inductors.
✓ 已验证
产品关联
DOI
高影响因子
Journal of CO2 Utilization
·
2023
·
IF 7.7
Jiaxin Liang,Siyuan Wang,Change Wu,Shuanjin Wang,Dongmei Han,Sheng Huang,Zhiheng Huang,Min Xiao,Yuezhong Meng
Poly(propylene carbonate phthalate) (PPC-P) is a new biodegradable polymer which displays improved thermal and mechanical properties compared with poly(propylene carbonate) (PPC). However, PPC-P suffers from low melt viscosity at high temperature, restraining its applications in foaming and blowing materials. To address this issue, crosslinkable PPC-P is designed and synthesized by introducing vinyl moieties into PPC-P backbone. Later, the crosslinking conditions are optimized and the influences on the crosslinking density is investigated. The crosslinked PPC-P possesses tailorable melt flow rates, basically unchanged thermal properties and improved tensile performances as well as satisfactory transparency, laying a foundation for PPC-P to be applied as foaming and blowing materials.
✓ 已验证
产品关联
DOI
高影响因子
MATERIALS RESEARCH BULLETIN
·
2023
·
IF 5.4
Wenjie Hou,Yan Xing,Claudia Li,Tong Li,Dong Liu,Lusi Ernawati,Jaka Sunarso,Xiuxia Meng
Metal-organic frameworks (MOFs) with intrinsic porosity and high specific surface area have aroused broad interests as a promising electromagnetic (EM) absorbing material. However, the introduction of magnetic components in MOFs has remained as a formidable obstacle for subsequent development. Herein, Fe 3 O 4 /Co-MOF composites were fabricated via a facile and scalable co-precipitation process. The microstructure and morphology of the composites were characterized and the combination of hollow Fe 3 O 4 and Co-MOFs was found to contribute towards the dissipation of incident waves due to the magnetic-dielectric synergistic effect. Impressive microwave absorption ability was obtained with a minimum reflection loss of –56.1 dB over a qualified bandwidth (7.9 GHz) at 2.0 mm. Moreover, the radar cross section simulation further confirmed the effective suppression of radar wave scattering using Fe 3 O 4 /Co-MOF composites. This study provides a versatile strategy for designing magnetic-dielectric composites based on MOFs as effective and broadband microwave absorbers.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2023
·
IF 22.1
Shujuan Lv,Ying Deng,Qian Liu,Ziqi Fu,Xiaobin Liu,Minghui Wang,Zhenyu Xiao,Bin Li,Lei Wang
The hollow materials with open structure can accelerate the mass transfer and bubble release rate, which have attracted tremendous attention for electrocatalytic water splitting. In this work, a unique tri-metal phosphide open nanotube structure [FeCoNiP@carbon quantum dots, FCNP@CQDs] is firstly fabricated by a selected etching and phosphating process with a MIL-88A@CQDs (MIL stands for Material of Institute Lavoisier) as the precursor. Benefiting from their open structure, FCNP@CQDs exhibit excellent catalytic performance. In alkaline seawater solution, a low overpotential of 268 mV is required to reach 20 mA cm −2 current density for oxygen evolution reaction, while the η 20 of hydrogen evolution reaction is 150 mV. The FCNP@CQDs//FCNP@CQDs electrolyzer requires a voltage of 1.61 V to reach 10 mA cm −2 . The integrated strategy of CQDs-doping and construction of hollow open structures may open a new and relatively unexplored path for fabricating high-performance seawater splitting catalysis.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2022
·
IF 7.392
Zhengliang Zhang,Zhiwei Zhang,Xubin Zhang,Fumin Wang,Zheng Wang,Yongwang Li,Xingtao Wang,Rosine Ahishakiye,Xu Zhang
Exploring low-cost green catalysts to achieve green organic chemicals and fuels from biomass is one of the crucial ways to solve the energy crisis. The 20 wt% Co-CoO x /AC catalysts were prepared to achieve the one-pot conversion of furfural to 2-methylfuran under milder reaction conditions (120 °C, 2.5 MPa H 2 ), shorter reaction time (5 h) and less catalyst dosage by regulating the ratio of metal to oxide species. The yield of 2-methylfuran reached 87.4 % is achieved under 20 wt% Co-CoO x /AC catalyst conditions, and there was no significant degradation of all catalyst properties after five cycles. Characterization results showed that the active components in the catalyst were present as Co 0 species with CoO x species. The reaction mechanism was explained by combining the characterization results, experimental data and DFT calculations. The formyl group of the furfural side chain is first adsorbed on the Co 0 species, and furfuryl alcohol is produced in the presence of the Co 0 species. Subsequently, the CoO x species adsorbs the C O bond on the side chain, which is broken in the presence of the CoO x species to form 2-methylfuran. The excellent catalytic activity of the 20 wt% Co-CoO x /AC catalyst provide a promising application for preparing 2-methylfuran by hydrodeoxygenation of furfural.
✓ 已验证
产品关联
DOI
高影响因子
Catalysts
·
2022
·Vol. 12
·期 12
·1508
·
IF 4.501
Jinhua Sun,Yuanhui Zuo,Hanyun Wang,Huancong Shi,Shijian Lu
The three-dimensional (3D) nanoreactor of global-local CNTs conductive network coupled with bimetallic MOFs-derived Co@N-C nanopolyhedra (denoted as gl-CNTs/Co@N-C) promotes the electrocatalytic reduction of oxygen owing to the improved mass transfer ability and stability. Here, the 1D/3D gl-CNTs/Co@N-C nanostructures with enhanced electrocatalytic properties were synthesized in one step by the direct thermolysis of Zn/Co-ZIF/MWCNTs precursor. Based on systematical optimization of the composition and structure, gl-CNTs/Co@N-C carbonaceous porous hybrids containing uniform Co nanoparticles (NPs) can not only effectively enable the conductivity but also expose more active sites. Consequently, the optimal gl-CNTs/Co@N-C nanostructure showed a significantly enhanced catalytic activity for the reduction of oxygen, the half-wave potential (E1/2) and diffusion-limited current density are 0.86 V (vs. RHE) and 5.34 mA cm−2, respectively. Moreover, this catalyst also showed long-term durability and methanol tolerance property, further highlighting the structure superiority of a precisely controllable nanoreactor.Keywords:global-local CNTs;conductive network;carbon-based catalysts;oxygen reduction reaction;methanol tolerance
✓ 已验证
产品关联
DOI
高影响因子
INDUSTRIAL CROPS AND PRODUCTS
·
2023
·
IF 5.9
Banglun Xiong,Sen Ma,Binglin Chen,Yunchao Feng,Zhiqing Peng,Xing Tang,Shuliang Yang,Yong Sun,Lu Lin,Xianhai Zeng,Yong Chen
A large number of bamboo waste is produced from bamboo processing industries. Bamboo waste, with high biomass yield and rich in xylan and glucan , is a promising material for the coproduction of xylo-oligosaccharides and glucose. In this work, a formic acid-facilitated hydrothermal pretreatment of bamboo was investegated to increase the yield of xylo-oligosaccharides by controlling the severity factor (SF) and formic acid concentration. The maximum xylo-oligosaccharides yield was 68.04 % (of initial xylan) and the concentrations of X 2 , X 3 , X 4 , and X 5 were 4.56, 3.08, 2.30 and 2.58 g/L, respectively. The highest enzymatic hydrolysis yield reached 93.05 % at 45 FPU/g cellulase dosage. Additionally, lignin isolated after formic acid pretreatment (FA-lignin), and lignin from alkali extraction (AE-lignin) had better thermal stability than milling wood lignin (MWL), which could be used in fire-retardant material applications. The techno-economic analysis predicts a revenue of 118.86 USD by processing 100 kg of waste bamboo combined with enzyme cost analysis. To conclude, xylo-oligosaccharides (12.56 kg), xylose (4.81 kg), glucose (22.37 kg) and lignin (13.28 kg) were produced from bamboo (100 kg, 18.37 % xylan, 44.29 % glucan, 27.23 % lignin). The results can give insights into establishing an efficient acid pretreatment of bamboo waste to produce xylo-oligosaccharides, glucose and lignin.
✓ 已验证
产品关联
DOI
高影响因子
DIAMOND AND RELATED MATERIALS
·
2022
·
IF 3.806
Qi Qu,Huanhuan Wang,Qianpeng Dong,Yan He
In the current work, Ni-Co/CNTs networks were firstly produced by a simple annealing treatment of Ni Co PBA, which was then used as a carbon-based carrier and successfully deposited Fe 3 O 4 nanospheres via a classic hydrothermal reaction process. Additionally, the electromagnetic wave absorption performances of composites could be effectively affected by adjusting the mass ratio of the Fe 3 O 4 nanoparticles . The minimum reflection loss (RL min ) of −48.76 dB was achieved for Fe 3 O 4 @Ni-Co/CNTs-1# at 3.5 mm thickness. Meanwhile, Fe 3 O 4 @Ni-Co/CNTs-2# exhibited a wide effective absorption band (EAB) of 5.9 GHz (12.1–18 GHz) at a 2.0 mm matching thickness, suggesting that the Fe 3 O 4 @Ni-Co/CNTs composites were a promising absorber for electromagnetic wave absorption materials . Based on the synergistic effects of dielectric and magnetic losses generated by Ni-Co/CNTs and Fe 3 O 4 , respectively, and appropriately matched impedances, a new strategy for fabricating lightweight, thin-thickness, strong absorption, and wide-bandwidth materials was provided.
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2023
·
IF 7.2
Liping Zhang,Xiangchuan Zhao,Zhaoyun Chu,Qing Wang,Yue Cao,Jiao Li,Wu Lei,Jun Cao,Weimeng Si
Rational design of transition metal catalysts with robust and durable electrocatalytic activity for hydrogen evolution reactions (HER) is extremely important for renewable energy conversion and storage, as well as water splitting. Heteroatom doping has emerged as a feasible strategy for enhancing electrocatalytic activity. Here, cobalt nanoparticles (Co-NPs) were coated with nitrogen-doped carbon nanotubes (NCNTs) prepared via an in situ growth on accordion-like Ti 3 C 2 T x -MXene (Co-NCNT/Ti 3 C 2 T x ). Such an intriguing structure showed great features: abundant anchoring sites for NCNT in situ growth, intimate integration of Co-NPs and NCNTs, high-speed electron transfer between 1D NCNTs and 2D Ti 3 C 2 T x -MXenes, and a large number of effective catalytic active sites. This Co-NCNT/Ti 3 C 2 T x hybrid catalyst was demonstrated to possess excellent HER performance with low overpotential ( η 10 , 190 mV), small Tafel slope (78.4 mV dec −1 ), large electrochemically active surface area, and good long-term stability, thus outperforming many reported electrocatalysts . The present strategy provided a facile route for the design of transition metal HER catalysts with NCNT and MXene .
✓ 已验证
产品关联
DOI
高影响因子