JOURNAL OF POWER SOURCES
·
2019
·
IF 7.467
Qin Wang,Yejian Xue,Shanshan Sun,Shanshan Yan,He Miao,Zhaoping Liu
Facile synthesis of high efficient bi-functional oxygen catalysts is important for large-scale application of rechargeable metal-air batteries . Herein, an ethanol-water mediated co-precipitation approach is applied to fabricate Co–Mn–Ni (CMN) ternary spinel oxides with uniform 1D structure. Their catalytic activities toward the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are investigated by the rotating ring-disk electrode (RRDE) techniques. The ternary spinel oxide with the Co/Mn/Ni atomic ratio of 2:3:1 (CMN-231) exhibits the best bi-functional activities among the as-prepared ternary, binary and unitary spinel oxides (△E is as low as 0.88 V), which can be attributed to its reasonable element composition , mesoporous nanorod structure, strong oxygen-adsorption ability and good charger-transfer capability. In addition, the CMN-231 catalyst demonstrates a strong stability during long-term operation. This well-designed catalyst is applied in a homemade zinc-air battery, and exhibits good charge–discharge performances (voltage gap is 0.9 V at 50 mA cm −2 ) and remarkable cycling stability.
✓ 已验证
产品关联
DOI
高影响因子
FUEL
·
2019
·
IF 5.128
Haimiao Yu,Yang Liu,Jiecheng Liu,Dezhen Chen
The study aims to evaluate the catalytic potential of a Ni-based catalyst supported by magnesium slag (MS) for catalytic reforming of pyrolysis volatiles from pine sawdust. The catalysts were prepared by a wet impregnation method. The effects of different parameters (Ni loading content, calcination/catalytic bed temperature and steam to carbon (S/C) ratio) on the catalytic performance were investigated. In addition, tar cracking capability and coke deposition resistance of Ni/MS catalyst and Ni/γ-Al 2 O 3 catalyst were explored under different calcination/catalytic bed temperatures. The catalysts were characterized by BET, XRD, SEM, TEM, TPO and Raman spectroscopy. The Ni/MS catalyst exhibited excellent catalytic reactivity as well as thermal stability. The best tar conversion (95.69%) and the highest hydrogen yield of 38.9 mmol/g biomass were obtained over Ni/MS catalyst under the conditions of Ni loading content = 3%, calcination/catalytic bed temperature = 800 °C, and S/C = 0.5. The interactions among Ni, Fe, Ca, and Mg formed multiple active centers (e.g., Ca 2 Fe 2 O 5 , (Ni, Mg) O solid solution and NiFe 2 O 4 ) in the catalyst to show synergistic catalysis effects, thereby jointly improving catalyst activity and coke deposition resistance. Furthermore, both amorphous carbon and graphitic carbon were formed on the used catalysts and the D/G ratio (the relative intensity ratio between the D and G bands) was positively correlated with the catalytic activity.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2019
·
IF 8.355
Zimo Lou,Jiang Xu,Jiasheng Zhou,Kunlun Yang,Zhen Cao,Yizhou Li,Yuanli Liu,Liping Lou,Xinhua Xu
Atomic H* has been regarded as the key active species for the electrocatalytic hydrodechlorination (ECH), and the electrode design and operation conditions are related to the atomic H* generation. However, there is limited understanding of how the operation parameters affect the atomic H* generation and utilization. Due to the fact that Pd was inefficient in water dissociation step, MnO 2 was combined with Pd to construct a novel Pd/MnO 2 /Ni foam cathode. Cyclic voltammetry confirmed that Pd/MnO 2 /Ni foam cathode with MnO 2 load of 0.51 mg cm −2 possessed the highest atomic H* generation and ECH activity. Excessive Pd load (>0.44 mg cm −2 ) was detrimental to ECH because of the side hydrogen evolution reaction (HER). Operation conditions (e.g. applied current and electrolyte concentration) would directly affect the cathode potential, which was an important indicator of the atomic H* generation. The optimal cathode potential was determined to be −0.85 V when the applied current was 10 mA in this study. The electrolyte concentration of 10–15 mM was able to provide sufficient atomic H* for ECH, while excessive input of electrolyte would favor HER but inhibit ECH. ECH at acidic and neutral/alkaline solution underwent different pathways for atomic H* generation and further affect the utilization of atomic H*. After 120 min reaction, >70% of atomic H* could be selectively used for ECH at initial pH of 4.0 and 5.0, while only ∼37% was used for ECH at initial pH of 7.0. This work correlated the reactivity of electrode with the atomic H* and cathode potential, which would provide strategies for ECH catalyst design and operation optimization.
✓ 已验证
产品关联
DOI
高影响因子
CARBON
·
2019
·
IF 7.466
Yahong Xie,Jian Cheng,Haichao Liu,Junli Liu,Buhaidiqie Maitituersun,Junhong Ma,Yue Qiang,Haokun Shi,Cong Geng,Yudong Li,Guihua Yang
Carbon-based perovskite solar cells (PSCs) have received widespread attention due to their low cost and high stability. The carbon electrode prepared by the doctor blade method easily forms defects at the interface between the perovskite layer, thereby reducing its photoelectric conversion efficiency (PCE). In this study, an easily deformable Co–Ni alloy@carbon aerogel was added between the carbon electrode and the perovskite layer via the grinding process, thereby effectively improving the interface quality and hole transporting ability. Correspondingly, the open-circuit voltage and fill factor of the hole-transport-material-free PSCs were significantly improved. A PCE of 12.71% was achieved, but it decreased to 10.77%, which remained at 86%, after 1296 h in the air. Chronoamperometry, Nyquist characterization, and capacitive effect were used to explain the cause of the hysteresis in the PSCs in detail.
✓ 已验证
产品关联
DOI
高影响因子
NANO
·
2019
·
IF 1.293
Liang Yu,Qingfeng Yi,Xiaokun Yang,Xiulin Zhou
Development of a neutral Zn–air battery is of much significance due to the high stability of zinc in a neutral electrolyte. Here, Ni/Co-doped C–N nanotube composites (C–N, Ni/C–N, Co/C–N, and Ni–Co/C–N) as efficient oxygen reduction reaction (ORR) electrocatalysts in a neutral medium have been prepared by direct pyrolysis of Ni/Co salt, dicyandiamide (DCD) and glucose. Among the synthesized catalysts, Ni–Co/C–N presents a high ORR current density of 8.5 mA ⋅ cm − 2 in a 0.5 mol ⋅ L − 1 KNO 3 solution. The ORR electron transfer number of the catalyst Ni–Co/C–N is 3.8, indicating that O 2 is almost completely reduced to H 2 O. A neutral zinc–air battery utilizing a 0.5 mol ⋅ L − 1 KNO 3 solution has been assembled by using the prepared composite catalyst coated on carbon paper as an air cathode, and Zn plate as an anode. The battery with the cathode catalyst Ni–Co/C–N delivers the open-circuit voltage of 1.13 V and the maximum power density of 65 mW ⋅ cm − 2 . The constant discharge current density of 50 mA ⋅ cm − 2 , 100 mA ⋅ cm − 2 and 150 mA ⋅ cm − 2 can last 202 h, 93 h and 11 h, respectively. A stable voltage plateau appears at various discharge current densities. The neutral zinc–air battery can be repeatedly discharged after replacing the zinc anode. Results indicate that the synthesized Ni–Co/C–N catalyst is an excellent cathode material applied to a neutral zinc–air battery, showing broad application prospects as a mobile power source.
✓ 已验证
产品关联
DOI
高影响因子
FUEL
·
2019
·
IF 5.128
Zhonghui Zhang,Zhiliang Ou,Changlei Qin,Jingyu Ran,Chunfei Wu
Biomass steam gasification has a large potential to produce high-purity hydrogen, and perovskites are good candidates to act as catalyst supports in eliminating the biomass tar produced during reforming. However, various alkali and alkaline earth metals are contained in actual biomass, which would be released during reactions and could affect the catalytic performance of perovskite-supported catalysts. To explore potential roles of alkali and alkaline earth metals in the catalysis process, in this work, typical K, Ca and Mg were added into Ni/La 0.7 Sr 0.3 AlO 3−x catalysts, and their performance in steam reforming of toluene as a model of biomass tar for hydrogen production were investigated comprehensively. Catalytic performance shows that the presence of K, Ca, and Mg leads to a better resistance to coking (a reduction of over 60%) and sintering of the Ni/perovskite catalysts utilized, and this trend becomes more pronounced as the decrease of reaction temperature. Furthermore, a series of catalyst characterizations, including XRF, XRD, SEM, TPR, TPD, and XPS were conducted to understand the action mechanism. And results reveal that the presence of K, Ca, and Mg in catalysts promotes the absorption ability of surface oxygen, which could oxidize reaction intermediates or the carbon deposited, thus enabling good reforming properties of the perovskite-supported Ni catalysts in the reforming of biomass tar.
✓ 已验证
产品关联
DOI
高影响因子
ChemElectroChem
·
2018
·Vol. 5
·期 17
·2376-2382
·
IF 4.446
Gang Yuan,Xiaopo Niu,Zhichao Chen,Li Wang,Xiangwen Zhang,Qingfa Wang
Graphical Ni 3 S 2 acts as a noble catalyst : A 3D porous, defect rich, and self-supported Ni 3 S 2 @Ni foam with core-shell structure is fabricated as electrocatalyst for methanol fuel cells. The electrocatalyst shows Pt-like activity, high poison tolerance, and long-term stability towards methanol oxidation in alkaline media. Direct methanol fuel cells are promising renewable energy devices for automobiles and portable electronic devices. The development of high effciency, poison tolerance, long-term stability, and noble metal-free electrocatalysts for methanol oxidation is still a major challenge. Herein, we develop a noble metal-free, 3D self-supported, defect-rich, hierarchical shell-core structured Ni 3 S 2 composite on Ni foam as electrocatalyst. This electrocatalyst shows a good activity, poison tolerance, and long-term durability towards methanol oxidation in alkaline media. It shows the lowest onset potential (−340 mV vs. Hg/HgO) among all the Ni-based catalysts reported up to date and a Pt-level specific activity. The methanol oxidation peak current of the electrocatalyst retains more than 97.5 % even after 5,000 voltammetry cycles in 0.5 M KOH+1 M CH 3 OH. The morphology and composition of the electrocatalysts before and after stability test were characterized by SEM, TEM, XRD, and XPS. The high activity, poison tolerance, and stability are attributed to the binder-free, directly grown Ni 3 S 2 shell on the Ni foam backbone, the lattice defect sites, and the synergetic effects between the in-situ formed active NiO x core and Ni 3 S 2 shell during methanol oxidation. This work indicates that the self-supported hierarchical shell-core Ni 3 S 2 @Ni foam electrocatalyst is a viable alternative for commercial Pt-based electrocatalyst applied in fuel cells.
✓ 已验证
产品关联
DOI
高影响因子
DALTON TRANSACTIONS
·
2019
·Vol. 48
·期 6
·2077-2085
·
IF 4.052
Jie He,Shanshan Sun,Zhao Zhou,Qipeng Yuan,Yanhui Liu,Hao Liang
A novel magnetic responsive Ni-based metal–organic framework material was developed to efficiently separate and immobilize thermal enzymes with high catalytic performance. Ni-based metal–organic framework nanorods (Fe3O4/Ni-BTC) with high magnetic responsiveness are prepared conveniently by a one-pot hydrothermal process. With the characterization, it was confirmed that Ni-based metal–organic framework nanocomposites were synthesized as nanorods mounted with magnetic Fe3O4 nanoparticles on the surface. Although Fe3O4/Ni-BTC showed a preference for histidine-tagged enhanced green fluorescent protein (His-eGFP), we found that a variety of forces played roles in enzyme immobilization, including affinity between Ni2+ and histidine tags, electrostatic attraction, hydrogen bonding and hydrophobic forces. After understanding the mechanism of the as-prepared nanocomposites, a new immobilization strategy for thermostable S-adenosylmethionine synthetase (SAMS) was further evaluated. As a result, SAMS from cell lysate achieved about 95% activity recovery in the biosynthesis of S-adenosylmethionine (SAM) under high temperature conditions (70 °C) with a simple mixing step. At the same time, the immobilized enzyme was more stable against temperature variation (by nearly 8-fold in an 80 °C water bath after 2 h) and extreme pH (by nearly 1.3-fold at pH 3) and exhibited excellent reusability after immobilization. This work indicates that magnetic responsive Ni-based nanorods are highly promising for thermostable enzyme immobilization with high efficiency and stability.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Nano Energy
·
2018
·
IF 13.12
Xingyue Liu,Zhiyong Liu,Bo Sun,Xianhua Tan,Haibo Ye,Yuxue Tu,Tielin Shi,Zirong Tang,Guanglan Liao
Organometal trihalide perovskite solar cells (PSCs) with carbon counter electrode (CE) have attracted tremendous interest due to their remarkable properties such as low cost and high stability. However, carbon-based PSCs always suffer from much lower power conversion efficiency (PCE) than the counterparts with noble metal cathode. Herein, we demonstrate a carbon-based planar heterojunction PSC using high-crystallinity Ni-doped rutile TiO 2 as electron transport layer (ETL) for the first time, while copper phthalocyanine (CuPc) is introduced as hole transport layer (HTL). It is found that Ni doping can shift the Fermi level of the ETL upward and increase the charge mobility of the TiO 2 film, thus enhancing the charge transport and extraction. An optimized PCE of 17.46% was obtained after 0.01 M Ni doping, comparable to or even better than devices with state-of-the-art doped Spiro-OMeTAD as HTL and Au as CE. To the best of our knowledge, this is the highest efficiency that has been reported for carbon-based PSCs. By contrast, the pristine TiO 2 -based device only displayed a PCE of 15.82%. Detailed superior capability of Ni-doped TiO 2 in facilitating charge transfer and suppressing carrier recombination are revealed by Hall effect and photoluminescence (PL) as well as electrochemical impedance spectroscopy (EIS) measurements. Furthermore, the use of highly stable CuPc and commercial carbon makes as-prepared PSCs exhibit excellent stability with no obvious decline in PCE after being stored in ambient air for 1200 h. This work presents an important step forwards to the commercialization of carbon-based PSCs with high efficiency and long-term stability.
✓ 已验证
产品关联
DOI
高影响因子
ChemCatChem
·
2018
·Vol. 10
·期 20
·4555-4561
·
IF 4.674
Xiaoguang Liang,Ruoting Dong,Dapan Li,Xiuming Bu,Fangzhou Li,Lei Shu,Renjie Wei,Johnny C. Ho
Graphical A hierarchical porous electrocatalyst structure utilizing Ni(OH) 2 nanosheets directly synthesized on Ni foam as the conductive and interconnected supports is developed for the deposition of Ni−B nanoparticles by using the facile dip-coating method. This synergistic hybrid electrocatalyst system configured of Ni−B nanoparticles, Ni(OH) 2 nanosheets and Ni foam can exhibit dramatically electrocatalytic activities and superior long-term stabilities towards oxygen evolution reaction. Earth-abundant and highly-efficient electrocatalysts for oxygen evolution reaction (OER) are urgently desired to realize the large-scale storage and conversion of renewable energies. In this work, we develop a hierarchical porous electrocatalyst structure utilizing Ni(OH) 2 nanosheets directly synthesized on Ni foam as the conductive and interconnected supports. By coupling with amorphous Ni−B nanoparticles, this hybrid catalyst exhibits dramatically enhanced electrocatalytic activities and durabilities towards OER. In specific, along with the optimized Ni−B loading, this catalyst requires only an impressively small overpotential of 300 mV to drive a current density of 100 mA cm −2 for oxygen evolution in 1 M KOH electrolyte. Meanwhile, it also yields a small Tafel slope of 49 mV dec −1 and a superior long-term stability. All these results evidently indicate that the hierarchical hybridization of Ni−B with Ni(OH) 2 on Ni foam can effectively synergize the oxygen evolution, opening up a new vista for designing high-performance transition metal-based nanostructures in the field of electrochemical water splitting.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2018
·
IF 6.735
Hua Tian,Wentao Bao,Yang Jiang,Lin Wang,Lin Zhang,Ou Sha,Cunqi Wu,Faming Gao
The ingenious synthesis strategies have been highly desired to construct hybrid composites with intriguing properties for supercapacitors . Herein, Ni-Al LDH (layered double hydroxide)/NNDG (nitramine-N-doped graphene) hybrid composites with a layered structure were fabricated via a novel self-assembly process. Nitramine-N dopants anchored to graphene framework allow the self-immobilization of delaminated Ni-Al LDH nanolayers onto the surface of two-dimensional carbonaceous scaffolds and boost the abundance of Ni 3+ within hybrid composites along with the removal of interlayer anions within Ni-Al LDH-NO 3 . Remarkably, the combination of Ni-Al LDH with NNDG can not only enhance the utilization of electrochemically active matrixes in dependence on the increase of electrolyte accessible active sites, but also maximize the electrochemically active contact between inorganic macromolecules and carbonaceous matrixes in favor of the establishment of conductive architectures. Furthermore, Ni-Al LDH/NNDG hybrid composites achieve a specific capacity of 975 C g −1 at a specific current of 1.0 A g −1 with a capacity retention of 75% as the increase of specific currents to 10 A g −1 , superior to Ni-Al LDH-NO 3 and Ni-Al LDH/rGO hybrid composites. The hybrid supercapacitor comprised of Ni-Al LDH/NNDG hybrid composites as a positive electrode and activated carbon as a negative electrode attains a high energy density of 59 Wh kg −1 with a power density of 1991 W kg −1 at a specific current of 2.5 A g −1 and retains 95% of the initial capacitance after 10 000 cycles at a specific current of 10 A g −1 . The excellence electrochemical performance demonstrates clearly the potential application of self-assembled Ni-Al LDH/NNDG hybrid composites for hybrid supercapacitors.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2018
·
IF 3.779
Dmitrii Rakov,Yuzhi Li,Siqi Niu,Ping Xu
Recently reported transition metal phosphosulfide (MPS 3 or MPS) nanosheets (NSs) demonstrated outstanding activity towards hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), and proper doping of a second transition metal might even enhance the catalytic activity. By considering the oxophilicity of the doping element, here we demonstrate the Mn (with higher oxophilicity) and Ni (with lower oxophilicity) doping of Ni 1- x Mn x PS 3 and Mn 1- x Ni x PS 3 NSs on their HER and OER activity in alkaline solution. It is found that non-substituted NiPS 3 NSs show better catalytic activity than their Mn-doped samples. On the contrary, Ni doping into MnPS 3 NSs significantly improves the electrocatalytic performance. This work may substantially expand the understanding of the role of elemental oxophilicity on the electrochemical water splitting activities of Ni/Mn based catalysts.
✓ 已验证
产品关联
DOI
高影响因子