Electrocatalysis
·
2023
·Vol. 14
·期 5
·776-787
·
IF 3.1
Zheng Yingping,Yu Dehua,Zhang Ke,Xu Wei,Ma Kaili,Wang Yuhang,Lou Yongbing
As a representative anodic reaction, the oxygen evolution reaction (OER) is often combined with hydrogen evolution, carbon dioxide reduction, and other cathodic reactions. Bimetallic selenides can satisfy the requirement of efficiency and economy for OER. However, the OER performance of Fe-Co-Se is less than satisfactory, restricted by the limited inherent active sites. Therefore, by doping P into Fe-Co-Se, the electron density and mass transfer were successfully adjusted. The 3D dandelion-like flower Fe-Co-Se-P/CC showed η 10 of 210 mV and the 45.3 mV dec −1 Tafel slope better than Fe-Co-Se/CC and RuO 2 . Experimental investigations demonstrated that outstanding OER activity was ascribed to the double modulation influences of P dopant both in electron environment and morphology which could not only improve conductivity but also enrich catalytic reactive sites. This work presents another choice for the design of a transition metal OER catalyzer and propels the development of electrocatalytic oxygen production to higher efficiency and lower cost. Graphical Abstract 3D dandelion-like flowers Fe - Co-Se-P structure anchored on carbon cloth has been firstly synthesized as economy and efficient OER electrocatalyst, which displays outstanding catalytic perform ance (equipped with 210 mV low overpotential at η 10 ) and stability benefited from the double modulation effect of P doping on the electronic environment and morphology.
✓ 已验证
产品关联
DOI
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2023
·
IF 5.2
Peiying Xie,Chunzhi Zhang,Mingxing Li,Qiao You,Ying Yuan,Shunjian Qiu,Zhiming Wang,Li Zhou,Yunhua Chen,Hongxia Liu
Pickering emulsion , an emulsion prepared by replacing conventional surfactants with solid particles, has been extensively used to construct a variety of functional materials especially 3D porous foams or aerogels . Ti 3 C 2 T x MXene have recently garnered tremendous attention and considered as a promising candidate for the construction of functional nanomaterials due to their fascinating properties. However, it remains a challenge to construct MXene-based composite porous materials. Herein, the Pickering emulsion co-stabilized by multiple kinds of particles and the subsequent MXene-based multifunctional composite foam were studied. The formation mechanism of Pickering emulsions stabilized by cellulose nanofibrils (CNF), nickel nanowires (Ni NW), and Ti 3 C 2 T x MXene was investigated along with their stabilization mechanism in a complex water-oil environment. The final Pickering emulsions exhibited excellent stability over a wide pH range (5−11) and ionic strength (0–400 mM). Further, the CNF/MXene/Ni (CMN) composite foam was prepared by freeze-drying the emulsion gel. The as-prepared foam exhibited a minimum reflection loss of −30.2 dB at 2.8 GHz frequency. Moreover, the foam also exhibited promising photothermal conversion behavior, maintaining a temperature of up to approximately 80.9 °C for 200 s of exposure to 1 Sun. Therefore, this work affords a new and universal method to prepare MXene-based multifunctional porous materials for their potential applications in many areas.
✓ 已验证
产品关联
DOI
高影响因子
EUROPEAN POLYMER JOURNAL
·
2023
·
IF 6
Hongxu Meng,Zhisong Li,Linbo Wu
Poly(ethylene 2,5-furandicarboxylate) (PEF) is an important biobased polyester with not only high glass transition temperature ( T g ), excellent strength and rigidity but also superior gas barrier properties. However, its poor ductility could limit its applications. In this study, 2,5-thiophenedicarboylic acid (TDCA) was used to modify PEF by copolycondensation. By introducing 10–40 mol% TDCA, poly(ethylene 2,5-thiophenedicarboxylate-co-2,5-furandicarboxylate) (PEThF) copolyesters with intrinsic viscosity of 0.63–0.77 dL/g were synthesized and characterized with 1 H NMR, DSC, TGA, etc . The copolyesters are all amorphous polymers. Brittle-ductile transition was observed during tensile testing of PETh 10 F (PEThF containing 10 mol% 2,5-thiophenedicarboxylate unit). PEThFs containing 20–30% 2,5-thiophenedicarboxylate unit showed not only clearly improved ductility but also well-maintained performance advantages of PEF including high T g (84–81 °C), modulus (∼3.2 GPa), strength (yielding 95 MPa, breaking 60 MPa) and oxygen barrier (5.4–5.0 times PET).
✓ 已验证
产品关联
DOI
高影响因子
DALTON TRANSACTIONS
·
2023
·Vol. 52
·期 42
·15447-15455
·
IF 4
Xianliang Li,Diwei Deng,Lufang He,Yan Xu
Exploration of credible non-enzymatic glucose sensors with high selectivity and sensitivity is of great significance for early clinical monitoring of glucose concentration and preventing the threat of diabetes to human health. Here, mesoporous carbon (MC) sphere immobilized Co-MOF-74 nanorods (NRs), denoted as Co-MOF-74 NRs/MC, were successfully prepared, in which the nanostructural porous carbon sphere was obtained using cobalt glycolate as the built-in template followed by a subsequent carbonization and acid treatment, and the MC spheres were then in situ deposited on the surface of Co-MOF-74 NRs via a solvothermal method. Benefiting from the good conductivity of the grafted porous carbon spheres and the abundant active sites, as well as the permeability of microporous MOF-74 nanocrystals, the Co-MOF-74 NRs/MC modified glassy carbon electrode (GCE) exhibited effective non-enzymatic glucose sensing performance with a fast response time (less than 3 s) and a glucose sensitivity of 98.0 μA cm−2 mM−1. Furthermore, the Co-MOF-74 NRs/MC/GCE showed a favourable anti-interference capability in the presence of various interferents and good long-term reusability. The applicability of Co-MOF-74 NRs/MC/GCE for glucose sensing in real serum samples was also investigated, verifying the applicability of the electrode for targeted glucose monitoring in practical applications.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Foods
·
2023
·Vol. 12
·期 13
·2555
·
IF 5.2
Song Yu,Lianpeng Zou,Jiawei Zhao,Yiping Zhu
Human health is seriously threatened by mycotoxin contamination, yet health risk assessments are typically based on just one mycotoxin, potentially excluding the additive or competitive interactions between co-occurring mycotoxins. In this investigation, we evaluated the individual or combined toxicological effects of three fumonisin-family B mycotoxins: fumonisin B1 (FB1), fumonisin B2 (FB2), and fumonisin B3 (FB3), by using porcine intestinal epithelial cells (IPEC). IPEC cells were exposed to various concentrations (2.5–40 μM) for 48 h, and a cell counting kit (CCK8) was used to determine cell vitality. Firstly, we discovered that they might inhibit cell viability. Additionally, the cytotoxicity of FB1 was significantly greater than that of FB2 and FB3. The results also indicated that the combinations of FB1-FB2, FB2-FB3, and FB1-FB2-FB3 showed synergistically toxicological effects at the ID10-ID50 levels and antagonistic effects at the ID75-ID90 levels. In addition, the FB1-FB3 exposure was also synergistic at the ID10-ID25 level. We also found that myriocin and resveratrol alleviated the cytotoxicity induced by fumonisin in IPEC cells. In all, this study may contribute to the determination of legal limits, the optimization of risk assessment for fumonisins in food and feed, and the development of new methods to alleviate fumonisin toxicity.Keywords:fumonisins;gastrointestinal toxicity;combined toxicity;risk assessment;control strategy
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMOSPHERE
·
2023
·
IF 8.8
Hanliang Li,Bandna Bharti,Velu Manikandan,Mohamad S. AlSalhi,Nassar N. Asemi,Yanan Wang,Wenbiao Jin,Feng Ouyang
In this study, we investigated the deactivation kinetics and mechanism of N–F–TiO 2 /SiO 2 nanopowder as a model photocatalyst for the purpose of facilitating the photocatalytic degradation of acrylonitrile (AN) in aqueous environment. Prior research has already displayed the proficient degradation of AN through the utilization of N–F–TiO 2 /SiO 2 catalysts, revealing a degradation efficiency of 81.2% within a span of 6 min at an initial AN concentration of 10 mg/L. Multiple variables including the initial AN concentration, illumination intensity, and initial pH value were extensively analyzed during the degradation process. The kinetics of photocatalytic degradation of AN, facilitated by the N–F–TiO 2 /SiO 2 photocatalyst, were modeled by fitting the pseudo first-order reaction kinetics to each individual factor. Furthermore, the adverse effect of catalyst poisoning during the photocatalytic breakdown of AN using the N–F–TiO 2 /SiO 2 photocatalyst was analyzed through a range of different techniques including SEM, XPS, BET, XRD, TG, and NH 3 -TPD. The incorporation of findings from these diverse techniques revealed that, the primary factors contributing to the photocatalyst's poisoning were as follows: (i) During the degradation process, the build-up of intermediate molecules on active sites hindered their functionality, leading to a decrease in the efficiency of the photocatalytic reaction, (ii) Carbonaceous deposits formed when the catalyst's pore structure was obstructed by pollutants or intermediate products that had not undergone timely photocatalytic breakdown and (iii) The persistent erosion of active sites due to hydraulic forces resulted in inadequate performance of the N–F–TiO 2 /SiO 2 photocatalyst in aqueous solutions. A comprehensive analysis of the deactivation kinetics was conducted, deciding in the formulation of a detailed poisoning mechanism for the N–F–TiO 2 /SiO 2 photocatalyst. Additionally, we explored the catalysts regeneration, involving thermal treatment, ultrasonic irradiation, and catalyst reloading. This study not only advances our insight into the waning performance of catalysts in aqueous media but also establishes a conceptual framework for extrapolating analogous deactivation dynamics in other catalysts, grounded in precedent experimental knowledge. This research contributes to the development of a deactivation model for catalysts in the aqueous environment, based on existing experimental research, providing a theoretical framework for understanding the deactivation process of photocatalysts.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Energy Storage
·
2023
·
IF 9.4
Xiuli Huang,Wei Chen,Huan Liu,Shi Li,Wangwang Zhang,Yiming Ren,Rongli Zhang,Maodong Xu,Jiang Zhu
The couple of supercapacitors' high power density and batteries' high energy density endows aqueous zinc-ion hybrid supercapacitors (ZIHSCs) a perspective candidate for next-generation energy storage devices. Biomass-derived hierarchical porous carbon with excellent wettability towards aqueous electrolyte is regarded as a promising cathode for ZIHSCs applications. Herein, a N/O co-doped hydrophilic carbon with hierarchical porous architecture is conversed from protein enriched recycled badminton feathers via a facile and scalable strategy. The resultant carbon presents hierarchical porous architecture with high surface area and mesopore-governed pore size distribution, rich dual-doping of N/O heteroatoms and good water wetting behavior. The all-round teamwork of these unique properties provides numerous interfacial active sites plus extra reversible redox reaction for high energy density, and speedy kinetics for high power density. Incredibly, as-assembled ZIHSC device displays an ultrahigh capacity of 225.3 mAh g −1 at 0.1 A g −1 with an appreciable capacity retention of 73.8 mAh g −1 even at a 1000-fold amplified current density, thereby delivering admirable energy and power densities of 201.4 Wh kg −1 and 83.6 kW kg −1 . Most satisfyingly, an ultralong cycling life with no loss in capacity is achieved after 40,000 cycles even at 50 A g −1 . Therefore, by taking advantage of its intrinsic component, the conversion of biomass waste to high performance carbon-based cathode material holds a broad prospect and practical significance.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ANALYTICAL AND APPLIED PYROLYSIS
·
2023
·
IF 6
Yuting Wu,Yadong Wang,Peiao Chen,Yang Yang,Ziyue Tang,Yingquan Chen,Haigping Yang,Hanping Chen
In order to reduce nitrogen emissions during municipal sewage sludge (MSS) pyrolysis, the effects of co-pyrolysis of MSS with biomass and the second adsorption of KH 2 PO 4 -modified biochar were investigated. It was found that co-pyrolysis with cellulose inhibited the conversion of nitrogen into pyrolytic gas, and increased the N content in pyrolytic biochar. And the nitrogen fixation rate increased with cellulose addition increasing. Besides, compared with different biomass, MSS co-pyrolysis with 30% sugarcane bagasse had the optimal effect on nitrogen fixation (39%). Moreover, KH 2 PO 4 -modified biochar addition increased the second adsorption of nitrogenous volatiles and fixed nitrogen into oxides-N. The total nitrogen fixation rate reached maximum (47.65%) at 5% KH 2 PO 4 impregnation. Thus, it is an effective nitrogen fixation method that MSS co-pyrolysis of 30% sugarcane bagasse with the second absorption of 5% KH 2 PO 4 -modified biochar. This study provided an effective solution to improve the treatment of municipal sewage sludge by pyrolysis technology.
✓ 已验证
产品关联
DOI
高影响因子
PROGRESS IN ORGANIC COATINGS
·
2023
·
IF 6.6
Nanqi Shi,Haiyan Li,Xin Li,Hongxin Luo,Jiaying Jin,Jiayu Wang,Shuang Li
Two-dimensional hexagonal boron nitride (h-BN) has excellent corrosion resistance and barrier ability, showing unique advantages in the field of anti-corrosion. The h-BN was assembled with Zeolite imidazolate framework material (ZIF-8) and benzimidazole (BI), and an active filler (h-BN/ZIF-8@BI) with shielding and active corrosion resistance was prepared. Zeolite imidazolate framework material was in-situ grown on h-BN surface and loaded with benzimidazole (BI), prepared an active anticorrosive filler with high shielding property (h-BN/ZIF-8@BI). The microstructure, crystal form, element composition, corrosion inhibition ability and thermal stability of h-BN/ZIF-8@BI were studied. The barrier, corrosion inhibition and anti-friction properties of EP/h-BN/ZIF-8@BI combined with F51 epoxy resin were explored. EIS test shows that the corrosion inhibition efficiency of h-BN/ZIF-8@BI is as high as 81.8 %. The impedance modulus of the steel matrix protected by the composite coating was about 2 orders of magnitude higher than that of the control sample, showing excellent barrier ability. In addition, the salt spray test proves that the composite coating has excellent corrosion inhibition characteristics. Taber testing machine shows that the wear mass loss of EP/h-BN/ZIF-8@BI coating is 34.5 % lower than that of EP coating. This work provides a novel idea for the preparation of high barrier, active anticorrosive and wear resistant anticorrosive coatings, and provides a new horizon of the composite coatings.
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2023
·
IF 8.2
Mengli Lu,Li Ma,Juncan Li,Jie Li,Miao Tong,Fuli Dai,Feiyu Song,Xueqiong Zhang,Tong Qiu
As a first-line drug for breast cancer chemotherapy, the effectiveness of doxorubicin (DOX) is challenged by high doses and high toxicity. Studies showed the combination of Tanshinone IIA (TSIIA) and DOX could enhance the efficacy of DOX for cancer and reduce the toxic effects to normal tissues. Unfortunately, free drugs are easily metabolized in the systemic circulation, which are less prone to aggregation at the tumor site to exert anticancer efficacy. In present study, we prepared a carboxymethyl chitosan-based hypoxia-responsive nanoparticles loaded with DOX and TSIIA for the treatment of breast cancer. The results demonstrated that these hypoxia-responsive nanoparticles not only improved the delivery efficiency of the drugs but also enhanced the therapeutic efficacy of DOX. The average size of nanoparticles was about 200–220 nm, the optimal drug loading and encapsulation efficiency of TSIIA in DOX/TSIIA NPs were 9.06 % and 73.59 %, respectively. Hypoxia-responsive behavior were recorded in vitro, while the synergistic efficacy is significantly exhibited in vivo and the tumor inhibitory rate was 85.87 %. Notably, TUNEL assay and immunofluorescence staining verified that the combined nanoparticles exerted a synergistic anti-tumor effect by inhibiting tumor fibrosis, decreasing the expression of HIF-1α and inducing tumor cell apoptosis. Collectively, this carboxymethyl chitosan-based hypoxia-responsive nanoparticles could have promising application prospect for effective breast cancer therapy.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
COMPOSITES PART B-ENGINEERING
·
2023
·
IF 13.1
Li Zhang,Qian Zhang,Weihong Cao,Zhenghong Guo,Zhengping Fang,Juan Li,Peng Chen
A phosphorous-silicon (SiP) precursor was synthesized using p-phthalaldehyde, (3-aminopropyl) triethoxysilane and 9,10-dihydro-9-oxa-10-phosphaphenantrene-10-oxide. The SiP was used to fabricate a phosphorous-silicon hybrid microsphere (SiP-M) via the sol-gel method. The SiP-M was employed to enhance the flame retardancy of poly (butylene adipate-co-terephthalate) (PBAT). The results indicate that PBAT containing 0.1 wt% of SiP-M displays a UL-94 V0 rating and a limiting oxygen index (LOI) value of 26.5 vol%. Meanwhile, PBAT containing 1.0 wt% SiP-M exhibits a UL-94 V0 rating and a LOI value of 29.8 vol%, and some reductions in peak heat release rate , total heat release, and total smoke production. The SiP-M functions in both the gas phase and condense phase in the PBAT blend, and the former is predominant. In addition, a coupling agent KH560 was used to modify the interface adhesion between PBAT and SiP-M. The tensile strength and elongation at the break of PBAT blends are enhanced by an appropriate amount of KH560. This work provides an efficient method for preparing flame-retardant PBAT without deteriorating its mechanical properties .
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2022
·
IF 7.139
Li Du,Xiang Yu Gao,Zhu Li,Guo Yong Wang,Zi Wen,Chun Cheng Yang,Qing Jiang
Metal/carbon-based materials derived from metal-organic frameworks have recently attracted great attention for oxygen reduction reaction (ORR) electrocatalysts , but poor electrical conductivity and insufficient stability owing to granular structures, as well as low production hinder their practical applications. Herein, we design and synthesize Co nanoparticles decorated on N-doped carbon nanonecklaces (Co/N-CNNs) by way of electrospinning and following carbonization . The Co/N-CNNs hybrid exhibits excellent ORR performance with a positive half-wave potential (0.865 V) and a large limiting current density (5.35 mA cm −2 ), even comparable to those of Pt/C. Such superior electrocatalytic properties are attributed to the distinctive necklace-like structure, which supplies high specific surface area, hierarchical porous structure , well-dispersed and covered Co nanoparticles, and hierarchical architecture of N-doped carbon. This work provides an effective strategy to fabricate ORR electrocatalysts with well-designed structure and mass production via electrospinning.
✓ 已验证
产品关联
DOI
高影响因子