APPLIED SURFACE SCIENCE
·
2023
·
IF 6.7
Yanyan Zhang,Zhilin Jiang,Ruiqi Zhang,Kang Wang,Xitao Wang
The construction of metal–semiconductor heterojunction has been proven to be an effective way to improve the separation efficiency of photogenerated electrons and holes, thus enhancing photocatalytic activity of semiconductor with narrow band gap. Here, we construct a Cu-(Ga 0.2 Cr 0.2 Mn 0.2 Ni 0.2 Zn 0.2 ) 3 O 4 high entropy oxide (HEO) heterojunction by using Cu-containing HEO precursor, and the effect of Cu addition method on the photocatalytic performance was investigated. The results show that the addition method of Cu has a great influence on the size of Cu nanoparticles (NPs), heterojunction amount and photocatalytic activity of Cu-HEO catalysts. Cu-HEO samples prepared by direct introduction method possess much smaller Cu particles due to the uniform distribution and stronger diffusion hysteresis effect of Cu in HEO, and exhibit superior photocatalytic activity and CH 4 selectivity for CO 2 reduction. With the increase of Cu loading, the photocatalytic activity of Cu-HEO samples firstly increases and then decreases. Among these photocatalysts, Cu 0.5 -HEO obtained by the direct introduction method displays the highest CO 2 reduction activity, and the yields of CO and CH 4 reach to 5.66 and 33.84 µmol/h/g cat , respectively. This work innovatively uses HEO precursors with unique properties to construct metal-HEO heterojunctions with smaller metal particles and more active sites.
✓ 已验证
产品关联
DOI
高影响因子
FUEL
·
2023
·
IF 7.4
Junfeng Qin,Qinghui Shen,Cuicui Du,Min Hong,Yixin Yang,Xiaohua Zhang,Jinhua Chen
Heteroatom doping and vacancy engineering play vital roles in designing a high-activity electrocatalyst . Herein, we proposed a novel enriched Se vacancies engineering of the promising ruthenium chalcogenide of RuSe 2 induced by low-valence Cu doping for promoting hydrogen evolution reaction (HER) electrocatalysis in alkaline media. The Cu-doped RuSe 2 with enriched Se vacancies supported on graphitized carbon (Cu-RuSe 2 @C) was synthesized by a simple one-step selenization of bimetallic MOF precursor of Ru/Cu-BTC (1,3,5-benzenetricarboxylic acid) polyhedra. Compared to the Cu(Ⅱ)-dominant doped RuSe 2 (Cu Ⅱ/Ⅰ -RuSe 2 @C) with deficient Se vacancies, the proposed Cu(Ⅰ)-dominant doped RuSe 2 (Cu Ⅰ/Ⅱ -RuSe 2 @C) with enriched Se vacancies exhibited significantly improved electrocatalytic activity, which was potentially derived from the created electron-deficient Ru δ+ and Se ν− sites induced by low-valence Cu doping. Specifically, Cu Ⅰ/Ⅱ -RuSe 2 @C needed only 40 mV overpotential to drive a HER current density of 10 mA cm −2 , comparable to commercial Pt/C (38 mV) and much lower than those of Cu Ⅱ/Ⅰ -RuSe 2 @C (93 mV) and RuSe 2 @C (362 mV). Furthermore, an alkaline Zn-H 2 O fuel cell with a Cu Ⅰ/Ⅱ -RuSe 2 @C cathode was integrated to demonstrate its potential applications, which delivered a maximum power density of 15.1 mW cm −2 and specific capacitance of 660 mAh g −1 with good stability. Two series-connected alkaline Zn-H 2 O cells acted as a chemical energy converter for simultaneous electricity generation and hydrogen coproduction by driving the coupled water splitting.
✓ 已验证
产品关联
DOI
高影响因子
Analytical Methods
·
2023
·Vol. 16
·期 5
·731-741
·
IF 3.1
Liyuan Yu,Mengxiao Lv,Ting Zhang,Qixin Zhou,Juanhua Zhang,Xuexiang Weng,Yongming Ruan,Jiuju Feng
Herein, we present a simple and mild method to in situ prepare CuO nanostructures for non-enzymatic glucose sensing. A Cu-metal organic framework (Cu-MOF) precursor was first directly grown on a pencil lead electrode with 3D graphene-like surfaces (EPLE) and then in situ transformed into CuO nanorods. The CuO nanorod-modified EPLE (CuO/EPLE) shows high sensitivity (1138.32 μA mM−1 cm−2), fast response time (1.5 s) and low detection limit (0.11 μM) for glucose oxidation. It has been found that NaOH promoted the generation of ˙OH groups and Cu(III) on the CuO surface, which then facilitated the electrochemical oxidation of glucose. Signals characteristic of hydroxyl and carbon-centered radical adducts were detected by EPR. Furthermore, the CuO/EPLE sensor also shows good accuracy in glucose determination in human serum samples.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Materials Chemistry C
·
2023
·Vol. 11
·期 38
·13047-13055
·
IF 6.4
Xuemei Zhou,Lingmin Kong,Junkai Hao,Jing Feng,Shuo Sun,Chuanzhen Zhou,Yanmin Liu,Zhengquan Yan,Xiao Zhu,Lei Hu
To strengthen the enzyme-mimetic catalytic activity of the classical transition metal oxide of copper and iron, bimetal Cu–Fe oxide mesoporous nanoparticles (Cu–Fe MNPs) were prepared in one pot under microwave-assisted conditions. The proposed Cu–Fe MNPs possessed a well-distributed mesoporous structure with an average aperture of 3.91 nm and a high BET specific surface area of 197.93 m2 g−1. Their peroxidase-like kinetic parameters (Km/Vmax) toward catalyzing the redox reactions of TMB and H2O2 were 0.013 mM/3.01 × 10−8 M s−1 and 56.58 mM/4.12 × 10−8, respectively. In particular, both toxic o-aminophenol (o-AP) and bioactive glutathione (GSH) could deteriorate their peroxidase-like property with an obvious color change from blue to colorless in the proposed Cu–Fe MNPs-TMB-H2O2 system. Under optimized conditions, Cu–Fe MNPs-TMB-H2O2 showed selective response to o-AP and GSH with quite low detection limits of 1.57 × 10−8 mol L−1 (S/N = 3) and 3.35 × 10−8 mol L−1 (S/N = 3), respectively. When they were applied for the visual monitoring of o-AP and GSH in real aqueous, fruit juice and medicinal samples, the detection recovery (%) was between 96.8–101.4% for o-AP and 97.1–105.8% for GSH. The mechanisms of the synergetic enhancement of the peroxidase-like activity of Cu–Fe MNPs and the selective recognition of o-AP and GSH were investigated in detail.
✓ 已验证
产品关联
DOI
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2023
·
IF 5.2
Yuling Shi,Qing Liu,Qianqian Pan,Danlong Yang,Tao Wang
Polymer@metal core-shell microspheres are widely used in anisotropic conductive adhesives (ACAs). Styrene-divinylbenzene copolymer (PS-DVB) copper core-shell microspheres (PS-DVB@Cu) with high conductivity and anti-oxidation performance were successfully prepared by combining copper nanoparticles (Cu NPs) and electroless plating copper. The Cu NPs served as catalytic seeds, substituting noble metals to promote electroless deposition . Using environmentally benign ammonia borane as the reductant to replace toxic formaldehyde, the dense copper film was deposited on the surface of PS-DVB microspheres. The thickness of the Cu layer and bulk electrical resistivity of PS-DVB@Cu were tuned by controlling the concentration of the reducing agent. The minimum resistivity of PS-DVB@Cu was 3.27 × 10 −6 Ω·m and merely slightly changed in the air for two months. The prepared PS-DVB@Cu-based ACAs could be effectively applied to anisotropic conductive connections in small-scale circuits with satisfactory anisotropic conductivity.
✓ 已验证
产品关联
DOI
高影响因子
DALTON TRANSACTIONS
·
2023
·Vol. 52
·期 32
·11213-11221
·
IF 4
Yingying Wang,Yue Cao,Yan Hai,Xinyan Wang,Senda Su,Wenming Ding,Zhenyu Liu,Xiaoman Li,Min Luo
Electrocatalytic nitrate reduction to ammonia, which removes nitrates from aquatic ecosystems, is a potential alternative to the classical Haber–Bosch process. Nevertheless, the selectivity of ammonia is often affected by the toxic by-product nitrite. Here, the polyhedral-supported Cu nanoparticle binder-free monolithic electrode (Cu-BTC-Cu) is synthesized by the in situ electroreduction of Cu metal–organic framework (Cu-MOF) precursors. The Cu-BTC-Cu displays a high ammonia yield of 4.00 mg h−1 cm−2cat and a faradaic efficiency of 83.8% in 0.05 M K2SO4 (pH = 7), greatly outperforming the rod-supported (Cu-BTEC-Cu) and unsupported (Cu-BDC-Cu) Cu nanoparticle monolithic electrodes. Impressively, the Cu-BTC-Cu can inhibit significantly the release of by-product NO2− and present favourable stability after 10 consecutive cycles. These preeminent properties can be attributed to the polyhedral structure, which enables better dispersion of Cu nanoparticles and brings more active sites. Moreover, the reaction mechanism of Cu-BTC-Cu is analysed by electrochemical in situ characterization and several key intermediates are captured. This work provides new insights into the modification of the electrocatalytic nitrate reduction activity of Cu-based catalysts and ideas for the design of high-efficiency electrodes.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2023
·
IF 8.6
Yu Guan,Guolang Zhou,Lin Li,Yexin Jiang,Jingzhou Yin,Cheng Liu,Lili Zhang,Qiaofeng Han,Edison Huixiang Ang
This research focused on creating oxygen vacancy-enriched copper-doped LaFeO 3 perovskite using a Prussian blue MOF template. This new material, LFO-Cu, showed outstanding Bisphenol A (BPA) degradation with 98 % efficiency in just 30 min, ten times faster than pure LaFeO 3 (LFO). Moreover, the LFO-Cu/peroxymonosulfate (PMS) system worked effectively at pH levels from 4 to 10, breaking down various pollutants (TC, PhOH, MV, MB), and removing 85 % TOC in BPA and 50 % in TC. Density Functional Theory (DFT) calculations revealed that copper strengthened the catalyst-PMS interaction, leading to the generation of highly reactive oxygen species (ROS), primarily singlet oxygen ( 1 O 2 ) and superoxide radicals (O 2 – ·). A degradation pathway was proposed, showing less toxic intermediates than BPA. In summary, copper-doped oxygen-rich vacancy MOFs-derived perovskite has significant potential for improving refractory organic mineralization.
✓ 已验证
产品关联
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2023
·
IF 8.6
Yang Liu,Jun-xia Yu,Li Guo,Guoping Song,Xiaodi Li,Chunqiao Xiao,Fang Zhou,Ruan Chi,Guoqing Feng
A novel circulation system combined with coordination leaching and biosorption process was successfully used for the direct recycling of Cu 2+ from the electroplating sludge. Cu 2+ was firstly efficiently leached out from the sludge by the choosing organic acid, and then it was selectively adsorbed onto a modified sorbent from the lixivium containing other co-ions including Zn 2+ , Ca 2+ , Fe 3+ , Cr 3+ , and Mg 2+ under dynamic adsorption condition. The results of static leaching experiments and DFT calculations showed that citric acid showed the best leaching performance for Cu 2+ among the studied organic acids and the traditional inorganic acid (HCl). To selective recovery of Cu 2+ from the lixivium, ethylenediamine tetraacetic acid dianhydride (EDTAD) modified bagasse was prepared, and it had high adsorption capacity, selectivity, and good reusability toward Cu-citric acid complex. The adsorption isotherm for Cu matched with the Langmuir model with a maximum adsorption capacity of 52.2 mg/g. XPS and EXAFS analysis illustrated that the Cu-citric acid complex was broken by EDTA on the modified bagasse, and Cu 2+ enriched on the sorbent while citric acid was released into the lixivium again. In the combined leaching and sorption circulation system, Cu 2+ was simultaneously absorbed on the modified bagasse fixed bed column once it was leached out. Benefitting the recycling of citric acid and the continuous adsorbing of Cu of the circulation system, the leaching efficiency could be increased from 75.0 % to 92.4 %, even in the very dilute citric acid solutions (concentration of 0.01 mol/L). The combined methods could increase Cu recovery efficiency from the sludge at a low concentration of the leaching agent, which had great potential in the practical application.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS
·
2023
·Vol. 34
·期 24
·1-17
·
IF 2.8
Fan Yan,Wang Lei,Sun Xueqin,Li Cuili,Liu Jiacheng
A series of UiO-66-NH 2 -CA-Cu/g-C 3 N 4 (UCC 1 /CN x ) heterogeneous photocatalysts were constructed via a facile physical mixing treatment of the covalently post-modified MOF (UiO-66-NH 2 -CA-Cu) and functional materials g-C 3 N 4 . The tetracycline removal by the photocatalysis coupled with persulfate activation were studied under white light irradiation. The optimal UCC 1 /CN 20 photocatalyst showed the best photocatalytic performance, in which 94.0% TC could be efficiently eliminated ( k = 0.08669 min −1 ) within 30 min. The satisfactory degradation performance could be ascribed to the effective separation of photogenerated electron-hole pairs over the heterogeneous binary structure, which were demonstrated by several characteristic technologies including photoluminescence spectra, electrochemical impedance spectroscopy, transient photocurrent response and Bader charge analysis based on density functional theory calculations. Moreover, a possible mechanism behind the photocatalytic degradation was proposed and further affirmed by the quenching experiments and electron spin resonance measurements. Our work may supply a feasible idea for treating wastewater contained organic pollutants based on the heterogeneous photocatalyst.
✓ 已验证
产品关联
DOI
高影响因子
SENSORS AND ACTUATORS B-CHEMICAL
·
2023
·
IF 8.4
Xin Chen,Xiao-Zhen Feng,Tao Zhan,Yu-Ting Xue,Hai-Xiang Li,Guo-Cheng Han,Zhencheng Chen,Heinz-Bernhard Kraatz
Three enzyme-free electrochemical glucose (GLU) sensors with bimetallic structures were constructed by electrodeposition of gold and copper nanoparticles (AuNPs/CuNPs), nickel and copper nanoparticles (NiNPs/CuNPs), and a copper-based metal-organic framework (Cu-MOF) combined with PtNPs , respectively. Amongst, the Cu-MOF/PtNPs on a gold electrode (GE) exhibited the best catalytic performance for GLU oxidation due to the synergistic amplification. The relevant electrochemical behaviour of GLU showed that two OH - and two electrons were involved in the process. The differential pulse voltammetry (DPV) enables the establishment of linearity in the concentration of 0.40–25.00 mM, with a detection limit (LOD) of 0.06 mM and a sensitivity of 158.41 µA·mM −1 cm −2 . In addition, the Cu-MOF/PtNPs/GE sensor was used to detect GLU in oral liquid as well as human serum samples with a recovery rate of 97.00–103.98% and RSD less than 3.59%. Finally, a portable electrochemical detection system based on the STM32F103C8T6 microcontroller , obtained a GLU concentration 5.24 mM while detecting in a diluted injection where the value 5.40 mM was recorded by a commercial meter to show the system has very broad application prospects in the point-of-care setting.
✓ 已验证
产品关联
DOI
高影响因子
ACS Sustainable Chemistry & Engineering
·
2023
·
IF 8.4
Kang Lei,Haiming Huang,Xu Jia Liu,Weiliang Wang,Kai Guo,Ren Kui Zheng,Han Li
The eco-friendly thermoelectric material SnTe has recently gained immense attention due to its excellent thermoelectric properties and potential. However, its thermoelectric properties are limited by the inherent high carrier concentration (low Seebeck coefficient) and high thermal conductivity. Herein, we further introduce rare-earth element Y on top of the conventional Cu alloying to more effectively modulate its microstructure and thermal transport properties. The experimental results reveal that Y doping gives rise to band convergence, endowing Sn1–xYxTe-5%Cu2Te with an increased power factor of ∼22.14 μW cm–1 K–2. Meanwhile, the introduced abundant Y/Y2Te3 multiscale composite nanostructures in the matrix greatly enhance phonon scattering, resulting in an ultra-low lattice thermal conductivity of ∼0.43 W m–1 K–1. Consequently, these combined effects resulted in a peak ZT value of 1.27 at 823 K in Sn0.97Y0.03Te-5%Cu2Te. An enhancement of nearly 217% is achieved compared to pristine SnTe, which greatly improves the thermoelectric properties of SnTe-based materials.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Materials Chemistry B
·
2023
·Vol. 11
·期 19
·4211-4226
·
IF 7
Zhongping Su,Haiying Xu,Ying Zhang,Huanli Zhang,Hui Zhang,Yujun Bao,Xiaodan Wu,Rui Yan,Guanghui Tan,Zhiqiang Wang,Yingxue Jin
Immune checkpoint blockade (ICB) is a kind of promising anti-tumor immunotherapy that can block the negative immune regulatory pathways using a particular antibody. Weak immunogenicity in most patients is a key obstacle to ICB therapy. Photodynamic therapy (PDT) is a non-invasive treatment that can enhance the immunogenicity of the host and realize systemic anti-tumor immunotherapy; yet tumor microenvironment hypoxia and glutathione overexpression severely restrict the PDT effect. To overcome the above issues, we design a combination therapy based on PDT and ICB. We prepared red carbon dot (RCD)-doped Cu-metal–organic framework nanoparticles (Cu-MOF@RCD) as smart nano-reactors because their tumor microenvironment and near-infrared light responsive property can decompose tumor endogenous H2O2 through Fenton-like reactions. Cu-MOF@RCD also shows clear near-infrared photothermal therapy (PTT) effect and has an ability to deplete glutathione (DG), which together enhances decomposition of cellular H2O2 and amplifies reactive oxygen species (ROS) levels in cells, thus leading to enhanced PDT and chemodynamic therapy (CDT) effect. Moreover, programmed cell death-ligand 1 antibody (anti-PD-L1) is used together to enable combination therapy, as Cu-MOF@RCD can significantly enhance host immunogenicity. In summary, the combination of Cu-MOF@RCD with anti-PD-L1 antibody exerts a synergistic PDT/PTT/CDT/DG/ICB therapy and can be used to eradicate the primary tumors and inhibit the growth of untreated distant tumors and tumor metastasis.
✓ 已验证
产品关联
DOI
PubMed
高影响因子