ELECTROCHIMICA ACTA
·
2018
·
IF 5.116
Yuanxun Chen,Dan Ni,Xiaowei Yang,Congcong Liu,Junlin Yin,Kefeng Cai
A Zn-doped Ni-based metal−organic framework (Ni-MOF) material with honeycomblike hierarchical spherical structure is synthesized by a microwave-assisted method using HCl as the modulator for the first time. By adjusting the amount of the Zn ions doped, an optimal Zn doped Ni-MOF electrode material is obtained, which possesses a superior electrochemical performance: specific capacity of 237.4 mA h g -1 and 122.3 mA h g -1 at 1 A/g and 20 A/g, respectively. This is one of the highest performances reported so far for MOFs. The excellent electrochemical properties are ascribed to the unique crystal structure and special morphology of the Zn-doped Ni-MOF material. This work shows that the microwave-assisted synthesis is a rapid and efficient method for preparation of Ni-MOF supercapacitor electrode material.
✓ 已验证
产品关联
DOI
高影响因子
ENERGY CONVERSION AND MANAGEMENT
·
2018
·
IF 6.377
Junguang Meng,Zengli Zhao,Xiaobo Wang,Anqing Zheng,Dongyan Zhang,Zhen Huang,Kun Zhao,Guoqiang Wei,Haibin Li
Ni/Fe bimetallic catalysts were synthesized on an olivine support using the wetness impregnation (WI) and thermal fusion (TF) methods, and catalytic cracking and steam reforming on different tar model compounds (phenol and naphthalene) were investigated in a fixed bed reactor. The effects of the reaction temperature and space-time on the catalytic cracking activity of phenol and naphthalene were tested, and the influences of steam on the carbon molar ratio (S/C) and different synthesized methods on the steam reforming of phenol and naphthalene were also studied. In addition, the carbon deposited on the catalyst was analysed using temperature program oxidation (TPO), Raman spectroscopy and transmission electron microscopy (TEM) methods. The elemental composition of the catalyst was analysed by X-ray fluorescence (XRF), and the physiochemical properties of the catalysts were characterized via X-ray diffraction (XRD), the BET surface area, scanning electron microscopy (SEM), TEM, Raman spectroscopy, temperature program reduction (TPR), and X-ray photoelectron spectroscopy (XPS). The results showed that the structure of TF-Ni/Fe/olivine changed considerably compared with that of calcined olivine (mainly the Mg 2 SiO 4 phase) and that a portion of Fe was fused into the olivine structure and reorganized into a new (Mg, Fe) Fe 2 O 4 phase. After reduction, the Ni-Fe alloy was detected on both catalysts, and the particle size of the Ni-Fe alloy on TF-Ni/Fe/olivine was smaller than that of WI-Ni/Fe/olivine. The TF-Ni/Fe/olivine cracked phenol into small-molecule gas (CO and H 2 ) and a small quantity of olefin. By contrast, phenol was polymerized to naphthalene in the absence of a catalyst. The phenol and naphthalene steam reforming conversion on WI-Ni/Fe/olivine were both higher than that of TF-Ni/Fe/olivine. A 100-h stability test of phenol steam reforming on TF-Ni/Fe/olivine and WI-Ni/Fe/olivine was conducted, and TF-Ni/Fe/olivine showed higher stability in the early stages of the experiment due to stronger interactions between the active sites and olivine support. The deposited carbon from naphthalene steam reforming was more difficult to eliminate because it contained more C β and C γ , which had higher degrees of graphitization.
✓ 已验证
产品关联
DOI
高影响因子
RSC Advances
·
2018
·Vol. 8
·期 46
·25873-25880
·
IF 2.936
Jie Guo,Yongjiang Hou,Bo Li
A hollow Ni–Fe–B nanochain is successfully synthesized by a galvanic replacement method using a Fe–B nanocomposite and a NiCl2 solution as the template and additional reagent, respectively. Both the concentration of Ni and the morphology of the resulting Ni–Fe–B alloy are controlled by varying the duration of the replacement process during the synthesis. The Ni–Fe–B sample synthesized for 60 min (Ni–Fe–B-60) shows the best catalytic activity at 313 K, with a hydrogen production rate of 4320 mL min−1 gcat−1 and an activation energy for the NaBH4 hydrolysis reaction of 33.7 kJ mol−1. The good performance of Ni–Fe–B-60 towards the hydrolysis of NaBH4 can be ascribed to both hollow nanochain structural and electronic effects. Furthermore, the effects of temperature, catalyst amount, and concentration of NaOH and NaBH4 on the hydrolysis process are systematically studied, and an overall kinetic rate equation is obtained. The hollow Ni–Fe–B nanochain catalyst also shows good reusability characteristics and maintained its initial activity after 5 consecutive cycles.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ULTRASONICS SONOCHEMISTRY
·
2018
·
IF 6.012
Guowei Wang,Siyi Li,Xue Ma,Jing Qiao,Guanshu Li,Hongbo Zhang,Jun Wang,Youtao Song
A novel Z-scheme coated composite, Er 3+ :Y 3 Al 5 O 12 @Ni(Fe 0.05 Ga 0.95 ) 2 O 4 -Au-BiVO 4 , was designed for sonocatalytic degradation of sulfanilamide and fabricated by sol-hydrothermal and calcination methods. The prepared sample was characterized by X-ray diffractometer (XRD), transmission electron microscopy (TEM), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), energy dispersive X-ray spectroscopy (EDX), UV–vis diffuse reflectance spectra (DRS), fourier transform infrared (FT-IR) spectra, Raman spectra and photoluminescence (PL) spectra. In Er 3+ :Y 3 Al 5 O 12 @Ni(Fe 0.05 Ga 0.95 ) 2 O 4 -Au-BiVO 4 , Ni(Fe 0.05 Ga 0.95 ) 2 O 4 and BiVO 4 form a Z-scheme sonocatalytic system, Er 3+ :Y 3 Al 5 O 12 as an up-conversion luminescence agent (from visible-light to ultraviolet-light) provides the ultraviolet-light for satisfying the energy demand of wide band-gap Ni(Fe 0.05 Ga 0.95 ) 2 O 4 and Au nanoparticles as co-catalyst forms more active sites to enrich electrons. Also, Au nanoparticles as conductive channels promotes the electrons (e − ) from conduction band of BiVO 4 to transfer to valence band of Ni(Fe 0.05 Ga 0.95 ) 2 O 4 . Due to the characteristics of valence state diversity, the Fe 3+ and V 5+ constitute a redox reaction recombination system, which can also push electrons (e − ) on conduction band of BiVO 4 to quickly transfer to valence band of Ni(Fe 0.05 Ga 0.95 ) 2 O 4 . The sonocatalytic activity of Er 3+ :Y 3 Al 5 O 12 @Ni(Fe 0.05 Ga 0.95 ) 2 O 4 -Au-BiVO 4 nanocomposite was detected through degradation of sulfanilamide under ultrasonic irradiation. A high sonocatalytic degradation ratio (95.64%) of sulfanilamide can be obtained when the conditions of 10.00 mg/L sulfanilamide, 1.00 g/L Er 3+ :Y 3 Al 5 O 12 @Ni(Fe 0.05 Ga 0.95 ) 2 O 4 -Au-BiVO 4 , 300 min ultrasonic irradiation and 100 mL total volume were adopted. Some factors such as ultrasonic irradiation time and cycle number on the sonocatalytic degradation efficiency are also investigated by using TOC and UV–vis spectroscopy. Subsequently, the effects of hydroxyl radicals ( OH) and hole scavengers were investigated to elaborate the mechanism. The researches show that the prepared Z-scheme Er 3+ :Y 3 Al 5 O 12 @Ni(Fe 0.05 Ga 0.95 ) 2 O 4 -Au-BiVO 4 coated composite displayed an excellent sonocatalytic activity in degradation of sulfanilamide under ultrasonic irradiation.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2013
·
IF 3.548
Ying Wang,Jun Peng,Chen Zhou,Zi-Yian Lim,Chunzheng Wu,Shuang Ye,Wei Guo Wang
Ni/ x Pr-Al 2 O 3 ( x = 5, 10, 15, 20 wt%) catalysts with an application in autothermal reforming of methane were prepared by sequential impregnation synthesis; its catalytic performance was evaluated and compared with that of Ni/γ-Al 2 O 3 catalyst; the physicochemical properties of the catalysts were characterized by X-ray diffraction (XRD), Transmission electron microscope (TEM), X-Ray Photoelectron Spectrometer (XPS), Thermo Gravimetric Analyzer (TGA) and H 2 -temperature programmed reduction techniques (TPR). The results showed that Pr addition promoted the reduction of nickel particle size on the surface. TPR experiments suggested a heterogeneous distribution of nickel oxide particles over x Pr-Al 2 O 3 supports and the promotion of NiO reduction by Pr modification. The CH 4 conversion increased with elevating levels of Pr addition from 5% to 10%, then decreased with Pr content from 10% to 20%. For the stability catalytic tests, Ni/ x Pr-Al 2 O 3 catalysts maintained the high activity after 48 h while Ni/Al 2 O 3 had a significant deactivation.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF CHEMICAL TECHNOLOGY AND BIOTECHNOLOGY
·
2015
·Vol. 91
·期 5
·1378-1386
·
IF 2.349
Qiujin Jia,Dongping Li,Xuechuan Gao,Jilong Yan,Qinglin Ma,Fanjun Meng
BACKGROUND Although methyl acrylate has been graft polymerized from cellulose and functionalized with hydrazine and hydroxylamine for removal of copper and nickel ions, the adsorption capacity was less than 80 mg g −1 . The present work reported hydrazinolysis of cellulose-graft-polymethyl acrylate and remarkably improved adsorption capacity for Cu(II) and Ni(II) in aqueous solution. RESULTS Hydrazinolyzed cellulose-graft-polymethyl acrylate (Cell-g-PMA-HZ) has been prepared by ceric salt-initiated graft polymerization of methyl acrylate from microcrystalline cellulose surface and subsequent hydrazinolysis with hydrazine hydrate. The successful synthesis was confirmed by Fourier-transform infrared spectroscopy, 13 C-NMR, elemental analysis, scanning electron microscopy and thermogravimetric analysis. Adsorption behavior of Cell-g-PMA-HZ for Cu(II) and Ni(II) were studied through batch static adsorption processes and column chromatography methods. The influences of graft yield, initial pH, contact time and temperature on adsorption capacity of Cell-g-PMA-HZ as well as adsorption equilibrium, kinetic and thermodynamic properties were studied in detail. Kinetic adsorption can be explained by pseudo-second-order and adsorption isotherms fitted with Langmuir isotherm model, from which maximum equilibrium adsorption capacity can be derived as 229.36 mg g −1 for Cu(II) and 173.91mg g −1 for Ni(II) at 28°C. Further thermodynamic investigation indicated that adsorption of Cu(II) and Ni(II) by adsorbent Cell-g-PMA-HZ was exothermic and spontaneous under the studied conditions. CONCLUSIONS Hydrazinolysis of cellulose-graft-polymethyl acrylate has been accomplished. As an adsorbent, the prepared Cell-g-PMA-HZ was reusable and fairly efficient for removal of Cu(II) and Ni(II) from aqueous solution. © 2015 Society of Chemical Industry
✓ 已验证
产品关联
DOI
高影响因子
CATALYSIS LETTERS
·
2014
·Vol. 144
·期 6
·1001-1008
·
IF 2.291
Lin Chao,Tao Kai,Hua Dayin,Ma Zhen,Zhou Shenghu
Abstract Bimetallic Au 3 M (M = Ni, Co, Fe) nanoparticles (NPs) were synthesized by reducing a mixture of Au 3+ and metal cations (Ni 2+ , Co 2+ , Fe 3+ ) by butyllithium in the presence of oleylamine. Au 3 M NPs were then deposited onto a commercial SiO 2 support. The Au 3 M/SiO 2 samples were not particularly active in the catalytic reduction of p -nitrophenol unless they were converted into Au–MO
x
/SiO 2 after appropriate thermal treatment in air. The Au–MO
x
/SiO 2 catalysts showed good thermal stability and significantly higher p -nitrophenol conversions than Au/SiO 2 . Relevant characterization was conducted employing X-ray diffraction, transmission electron microscopy, Fourier-transform infrared spectroscopy, and ultraviolet–visible spectroscopy. Graphical Abstract
✓ 已验证
产品关联
DOI
高影响因子
Journal of Energy Chemistry
·
2015
·
IF 2.352
Zhen Huang,Huanqi Jiang,Fang He,Dezhen Chen,Guoqiang Wei,Kun Zhao,Anqing Zheng,Yipeng Feng,Zengli Zhao,Haibin Li
Chemical looping dry reforming (CLDR) is an innovative technology for CO 2 utilization using the chemical looping principle. The CLDR process consists of three stages, i.e. CH 4 reduction, CO 2 reforming, and air oxidation . Spinel nickel ferrite (NiFe 2 O 4 ) was prepared and its multi-cycle performance as an oxygen carrier for CLDR was experimentally investigated. X-ray diffraction (XRD) and Laser Raman spectroscopy showed that a pure spinel crystalline phase (NiFe 2 O 4 ) was obtained by a parallel flow co-precipitating method. NiFe 2 O 4 was reduced into Fe–Ni alloy and wustite (Fe x O) during the CH 4 reduction process. Subsequent oxidation of the reduced oxygen carrier was performed with CO 2 as an oxidant to form an intermediate state: a mixture of spinel Ni 1− x Fe 2+ x O 4 , Fe 2+ y O 4 and metallic Ni. And CO was generated in parallel during this stage. Approximate 185 mL of CO was generated for 1 g spinel NiFe 2 O 4 in a single cycle. The intermediate oxygen carrier was fully oxidized in the air oxidation stage to form a mixture of Ni 1+ x Fe 2− x O 4 and Fe 2 O 3 . Although the original state of oxygen carrier (NiFe 2 O 4 ) was not fully regenerated and agglomeration was observed, a good recyclability was shown in 10 successive redox cycles.
✓ 已验证
DOI
高影响因子
Journal of Materials Chemistry A
·
2015
·Vol. 3
·期 45
·22708-22715
·
IF 7.443
Chunxiao Lv,Xianfeng Yang,Ahmad Umar,Yanzhi Xia,Yi(Alec) Jia,Lu Shang,Tierui Zhang,Dongjiang Yang
The increasing demand for high performance lithium ion batteries (LIBs) has aroused great interest in developing high specific capacity, cycle performance and rate capability anode materials. Transition metal oxides (TMOs) have attracted much attention as promising anode materials for rechargeable LIBs owing to their high theoretical capacity. Here, a general strategy has been developed to fabricate high-performance fibrous TMO anodes such as elemental Ni doped NiO fibre (NiO/Ni/C-F), yolk–shell structured carbon@Fe2O3 fibre (C@Fe2O3-F), and hollow CuO fibre (CuO-HF) with controllable nanostructures by using alginate microfibres as templates. The key to the formation of various TMO micro-/nano-structures is the templating ability of the natural structure of long alginate molecular chains, where the metal cations can be confined in an “egg-box” via coordination with negatively charged α-L-guluronate blocks. When tested as anode materials for LIB half cells, these fibrous electrodes deliver excellent cycling performance with no capacity decrease after 200 cycles (793 mA h g−1, NiO/Ni/C-F, 0.072 A g−1; 1035 mA h g−1, C@Fe2O3-F, 0.1 A g−1; 670 mA h g−1, CuO-HF, 0.067 A g−1), and demonstrate great rate performance at different current densities. This finding highlights a general, green and eco-friendly strategy for the scale-up production of potential high-performance TMO anodes for LIBs.
✓ 已验证
产品关联
DOI
高影响因子
ELECTROCHIMICA ACTA
·
2016
·
IF 4.803
Kai Zhang,Wenhai Wang,Long Kuai,Baoyou Geng
High-efficient catalysts for oxygen evolution reaction (OER) are crucial to energy storage and conversion between electricity and chemicals. This work proposes a facile co-reduction and subsequent co-oxidation strategy to gram-scale preparation of composition-controllable LDHs nanosheets by a case study of Ni-Fe LDHs. Different from the traditional coprecipitation method, this process does not need heating and pH control. More importantly, our method can make sure that the Ni-Fe proportion in the LDHs products is well consistent with that in the mother solution. Furthermore, the electrocatalytic OER results strongly demonstrate that the as-prepared Ni-Fe LDHs possess a top-scale activity toward OER in alkaline media, typically for the Ni 6 Fe 4 -LDH nanosheets with water oxidation overpotential as low as 0.24 V at a current density of 20 mA/cm 2 . Besides, it presents excellent stability during the endurance test. Therefore, the co-reduction and subsequent co-oxidation strategy is an highly efficient way to LDHs nanosheets for electrochemical applications.
✓ 已验证
产品关联
DOI
高影响因子
ENERGY
·
2016
·
IF 4.292
Haokun Cai,Liping Liu,Qiang Chen,Ping Lu,Jian Dong
Efficient non-precious metal catalysts are crucial for hydrogen production from borohydride compounds in aqueous media via hydrogen atoms in water. A method for preparing magnetic polymer nanoparticles is developed in this study based on the chemical deposition of nickel onto hydrophilic polymer nanogels. High-resolution transmission electron microscopic and XPS analyses show that Ni exists mainly in the form of NiO in nanogels. Excellent catalytic activities of the nanoparticles are demonstrated for hydrogen generation from the hydrolysis of dimethylamine-borane and sodium borohydride in which the initial TOF (turn-over frequencies) are 376 and 1919 h −1 , respectively. Kinetic studies also reveal an Arrhenius activation energy of 50.96 kJ mol −1 for the hydrolysis of dimethylamine-borane and 47.82 kJ mol −1 for the hydrolysis of sodium borohydride, which are lower than those catalyzed by Ru metal. Excellent reusability and the use of water for hydrogen production from dimethylamine-borane provide the additional benefit of using a hybrid catalyst. The principle illustrated in the present study offers a new strategy to explore polymer-transition metal hybrid particles for hydrogen energy technology.
✓ 已验证
产品关联
DOI
高影响因子
RSC Advances
·
2016
·Vol. 6
·期 19
·15354-15361
·
IF 3.289
Xinhuan Lu,Yang chen,Zhenshuang Zhao,Hao Deng,Dan Zhou,Changcheng Wei,Renfeng Nie,Qinghua Xia
The carbon supported 10% Ni catalysts doped with 3‰ Rh have been prepared by an impregnation method. These catalysts have been used to catalyze the one-step hydrogenation of nitrobenzene to cyclohexylamine. The results show that the 3‰ Rh–10% Ni/CSC (biocarbon) catalyst exhibits an excellent performance to achieve 100 mol% conversion of nitrobenzene and 91.6% selectivity of cyclohexylamine under reaction conditions of 3.5 MPa and 140 °C. The recycling tests reveal recyclable stability of 3‰ Rh–10% Ni/CSC. This catalyst is active for the hydrogenation of a series of electron-deficient nitrobenzenes. Some factors such as the type of carriers, the content of Ni and Rh, the type of metals and additives play important roles in controlling the selective hydrogenation.
✓ 已验证
产品关联
DOI
高影响因子