文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第3373至3384个,产品总数5,005个

切换升序
4
JOURNAL OF MATERIALS SCIENCE · 2023 ·Vol. 58 ·期 15 ·6643-6655 · IF 4.5

Simultaneous detection of lead and cadmium based on N-doped MoS2/MWCNTs nanocomposites

Zhang Hengchao,Li Yarou,Zhang Yupan,Wu Junfeng,Hu Jiandong,Li Shixin,Li Lanlan

Heavy metal pollution in the environment has posed a serious threat to human health and ecosystems. Therefore, it is urgent to develop a fast and effective sensing method for detecting heavy metal ions (HMIs). A simple and rapid ultrasonic mixing method was used to prepare nanocomposites consisting of cysteine, multi-walled carbon nanotubes, and nitrogen-doped molybdenum disulfide (L-Cys/MWCNTs/N-MoS 2 ). Fully combining the excellent features of 2D materials and carbon nanomaterials, the nanocomposites have been successfully used as sensor interface materials for the simultaneous detection of lead ions (Pb 2+ ) and cadmium ions (Cd 2+ ). The L-Cys/MWCNTs/N-MoS 2 @GCE sensor has a wide linear range for the detection of Pb 2+ and Cd 2+ , with the detection limits as low as 0.67 nM and 5.3 nM, respectively. In addition, the sensor performs well in stability, reproducibility, and anti-interference performance. The L-Cys/MWCNTs/N-MoS 2 @GCE sensor can also be used for the detection of Pb 2+ and Cd 2+ in tap water and lake water with good recovery (> 90%), which may provide a promising strategy for the simultaneous in situ and sensitive detection of heavy metal ions in the aqueous environment.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Biomass Conversion and Biorefinery · 2023 · IF 4

Catalytic conversion of 2,5-furandicarboxylic acid production from hemicellulose

Liu Yun,Wang Xueke,Hu Mingyang,Yu Yanyan

2,5-furandicarboxylic acid (FDCA), one of the most important building blocks, has attracted tremendous concerns, and the routes for FDCA synthesis from non-edible hemicellulose are of vital importance from the views of the circular economy. Herein, a multistep process towards hemicellulose-to-FDCA conversion is proposed, including hemicellulose-to-furfural conversion and sequential oxidation to furoic acid (FA), following with cesium furoate (FA-Cs) preparation and its direct carboxylation with carbon dioxide (CO 2 ). The overall conversion yield of the targeted FDCA product towards the hemicellulose-to-FDCA pathway reaches 29.6%. Many efforts are made on the direct carboxylation reaction of FA-Cs with CO 2 using Cs 2 CO 3 as a catalyst. Results show that FDCA with 56.47% yield is achieved via direct carboxylation of FA-Cs at 290 °C for 12 h with 40 mL/min of flowing CO 2 . Different from the previous reports, it is demonstrated that drying methods of FA-Cs show significant effects on the yield and properties of the targeted FDCA product. It is found that the conventional drying method is more suitable than the vacuum drying method. From the putative reaction mechanism, the roles of CO 2 and Cs 2 CO 3 are elucidated. CO 2 plays a direct role in carboxylation reaction, and excessive Cs 2 CO 3 can deteriorate FDCA yield due to the occurrence of decomposition. Interestingly, biochar generated during carboxylation reaction is a promising potential adsorbent, which can efficiently adsorb methylene blue with a removal rate of 96% and an adsorption amount of 80 mg/g. This present work can provide an integrated strategy for both hemicellulose valorization and CO 2 utilization in future.

CAS / MDL: 88-14-2
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
COLLOID AND POLYMER SCIENCE · 2023 ·Vol. 301 ·期 6 ·655-663 · IF 2.4

Visible light induced synthesis of PMMA microspheres

Wang Zhen,Leng Kangwei,Liu Jiuhong,Li Yueqiu,Liu Shucheng,Li Yan,Wang Zhongwei,Yu Qing,Han Yuxi

Poly(methyl methacrylate) microspheres with narrow particle size distribution were synthesized successfully under visible light (LED@420 nm) in this study, and no RAFT agent was involved. A novel acylphosphine oxide, (2,4-dimethylphenyl) phenylphosphine oxide (2,4-DMTPO), was used as the photoinitiator. Uniform microspheres with the weight-average diameter (D w ) of 1.03 μm and polydispersity index (PDI) of 1.06 were obtained upon irradiation for 30 min, when the ratio of methyl methacrylate (MMA) to solvent was 1:10, the amount of polyvinylpyrrolidone (PVP) and 2,4-DMTPO was 30 wt% and 2 wt% of MMA, respectively. However, no microspheres could be detected instead of large blocks when (2,4,6-trimethylbenzoyl) diphenylphosphine oxide (TPO) was the photoinitiator under the same condition. It could be due to the higher light absorption ability and quantum yield of 2,4-DMTPO at 420 nm than TPO. A possible formation mechanism of PMMA microspheres was proposed and the effects of photoinitiator, MMA, irradiation time, and PVP were discussed. Results shown that regular microspheres were formed when the irradiation time exceeded 30 min, and the amount of PVP was in the range of 25 to 40 wt% of MMA. Lowering the amount of photoinitiator to 0.5 wt% resulted in ca. 66% and 4% decrease of D w and PDI, respectively. This study may provide a rapid and energy saving way of synthesizing monodispersed PMMA microsphere, which would be benefit for the fields of coating, template, and so on.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ANALYTICAL SCIENCES · 2023 ·Vol. 39 ·期 7 ·1171-1178 · IF 1.6

Label-free photoelectrochemical immunosensing of α-fetoprotein based on Eu-TiO2 nanocomposites sensitized with dye-encapsulated HMA

Wang Kun,Gao Xue,Chen Jianfeng,Yang Xiaoyan

Abstract In this study, a sensitive photoelectrochemical immunosensor with dye-enhanced anodic photocurrent response was proposed for sensitive detection of α-fetoprotein (AFP). Specifically, europium-doped TiO 2 (Eu-TiO 2 ) was used as the photoelectrochemical functional material and coated onto indium tin oxide (ITO) electrode. Doxorubicin (DOX) as an excellent fluorescent dye was encapsulated in the hydrophobically modified alginate (HMA). Then the dye-loaded HMA was modified onto the surface of Eu-TiO 2 to further sensitize the photocurrent response. The results showed that the photoelectrical signal was enhanced and stabilized due to the effect of sensitization of DOX on Eu-TiO 2 material. The constructed PEC sensor revealed a good linear response to AFP antigen ranging from 0.5 to 100 ng/mL with a detection limit of 0.41 pg/mL. The clinical patient’s serum test results obtained from the proposed PEC immunosensor were consistent with those obtained from the commercial electrochemilunescence assay. The proposed PEC sensing method could be a promising analytical tool for the detection of AFP in clinical analysis. Graphical abstract

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
APPLIED PHYSICS A-MATERIALS SCIENCE & PROCESSING · 2023 ·Vol. 129 ·期 4 ·1-10 · IF 2.7

Investigation on the superconductivity of Nb3Al by Zn doping and the effect of multi-RHQT process on the superconductivity of Nb3(Al1-xZnx)

Luo Junsong,Guo Yiming,Liu Lian,Yu Zhou,Zhao Yong,Huang Mei,Xu Min,Duan Xuru,Zhang Yong

Nb 3 (Al 1– x Zn x ) ( x  = 0–0.05) wires were obtained after single rapid heating, quenching and low temperature transformation (single-RHQT) process. It is found that Zn element can make crystal plane diffraction peaks of Nb 3 Al phase shift to higher angle, and the interplanar crystal spacing decreases gradually, which indicates that Al atoms in Nb 3 Al lattice are replaced by Zn atoms with smaller diameters. And the addition of Zn can reduce Δ T c and make the superconducting phases purer, and magnetic performances such as critical temperature ( T c ), critical current density ( J c ), irreversible field ( B irr ) are better than that of the pure sample. Nb 3 (Al 0.99 Zn 0.01 ) wire shows the highest J c value of about 5.9 × 10 4 A/cm 2 at 4.2 K and 8 T, and the highest T c value of 16.8 K was found in Nb 3 (Al 0.98 Zn 0.02 ). The influence of multiple rapid heating, quenching and low temperature transformation (multi-RHQT) process on Nb 3 (Al 1– x Zn x ) wires was mainly explored, and 2 at% and 3 at% Zn samples were selected with relatively high Δ T c values for five times RHQT treatment. It is observed that the multi-RHQT process can further reduce Δ T c , and more homogeneous superconducting phases are discovered compared with that of single-RHQT process. The elements are also evenly distributed in the multi-RHQT-processed Nb 3 (Al 1– x Zn x ) wires, leading to the improvement of J c , B irr performances compared to single-RHQT samples. Multi-RHQT-processed Nb 3 (Al 0.98 Zn 0.02 ) and Nb 3 (Al 0.97 Zn 0.03 ) samples show the J c values of 1.7 × 10 5 A/cm 2 and 1.2 × 10 5 A/cm 2 (4.2 K, 8 T), which are nearly ten times as many as that of single-RHQT samples, and Nb 3 (Al 0.97 Zn 0.03 ) has the highest B irr values of 19.6 T (4.2 K) and 10.7 T (10 K). Flux pinning of the Nb 3 (Al 1– x Zn x ) ( x  = 0.01–0.05) wires follows the surface pinning mechanism, where grain boundary and stacking faults are considered as pinning centers.

CAS / MDL: 7440-66-6
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF POLYMER RESEARCH · 2023 ·Vol. 30 ·期 5 ·1-17 · IF 2.8

Synthesis of near-infrared absorbing conjugated copolymers with perfluorocarbon side chains to improve singlet oxygen generation efficiency

Zhang Zedong,Li Jian,Wang Chenyi,Ren Qiang

Photodynamic therapy (PDT) has shown promising development due to its low toxicity, high selectivity and low side effects. However, the effectiveness of PDT is dependent on the concentration of oxygen and tumor cells have a hypoxia microenvironment that reduces the therapeutic effect of PDT. Therefore, near-infrared absorbing conjugated copolymers with perfluorocarbon side chains, 2,5-bis(2- octyldodecyl)-3,6-di(thiophen-2-yl)-2,5-dihydropyrrolo[3,4-c]pyrrole-1,4-dione- co -2,5-thiophene- co -9,9-bis( N -methylperfluorohexylsulfonamidoethyl propionate)- fluorene copolymers, with the ability to generate singlet oxygen under hypoxia conditions were designed and synthesized. The structures of the copolymers were characterized by Fourier transform infrared spectrometer (FTIR) and proton nuclear magnetic resonance spectrum ( 1 HNMR). The singlet oxygen generation ability of the copolymers and corresponding nanoparticles under organic solvents and aqueous conditions was investigated. The results show that the absorption wavelengths of the fluorine-containing conjugated copolymers are greater than 650 nm and they show strong absorption in near-infrared region. The perfluorocarbon (PFC) side chain endows the copolymers with high singlet oxygen generation capability. As the content of fluorine-containing structural units increases, the generation capability of singlet oxygen increases. When the proportion of fluorine-containing structural units is 35%mol (P 3 -F35%), the copolymer has the singlet oxygen quantum yield of 36.29%. And the singlet oxygen generation capability of the fluorine-containing copolymers is significantly enhanced even under hypoxia conditions. The nanoparticle of fluorine-containing conjugated polymer shows good singlet oxygen generation ability in aqueous suspension. The results of this study indicate that introducing fluorine-containing structure unit into near-infrared absorbing conjugated copolymers is an effective way to enhance the singlet oxygen generation capability of copolymers, which may have broad application prospects in the field of photodynamic therapy.

CAS / MDL: 128-08-5
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
MICROCHIMICA ACTA · 2023 ·Vol. 190 ·期 5 ·1-10 · IF 5.7

Cucurbit[8]uril-mediated SERS plasmonic nanostructures with sub-nanometer gap for the identification and determination of estrogens

Teng Yuanjie,Li Xin,Chen Yingxin,Xu Pei,Pan Zaifa,Shao Kang,Sun Nan

The SERS intensity of analytes is primarily influenced by the density and distribution of hotspots, which are often difficult to manipulate or regulate. In this study, cucurbit[8]uril (CB[8]), a kind of rigid macrocyclic molecule, was introduced to achieve ~ 1-nm nanogap between gold nanoparticles to increase the density of SERS hotspots. Three kinds of estrogens (estrone (E1), bisphenol A (BPA), and hexestrol (DES)) which are molecules with weak SERS signals were targeted in the hotspots by CB[8] to further improve the sensitivity and selectivity of SERS. It was demonstrated that CB[8] can link gold nanoparticles together through carbonyl groups. In addition, the host–guest interaction of CB[8] and estrogens was proved from the nuclear magnetic resonance hydrogen and infrared spectra. In the presence of CB[8], the SERS intensities of E1, BPA, and DES were increased to 19-fold, 74-fold, and 4-fold, respectively, and the LOD is 3.75 µM, 1.19 µM, and 8.26 µM, respectively. Furthermore, the proposed SERS method was applied to actual milk sample analysis with recoveries of E1 (85.0 ~ 112.8%), BPA (83.0 ~ 103.7%), and DES (62.6 ~ 132.0%). It is expected that the proposed signal enlarging strategy can be applied to  other analytes after further development. Graphical Abstract

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
Nature Communications · 2023 ·Vol. 14 ·期 1 ·1-14 · IF 16.6

Multifunctional solvent molecule design enables high-voltage Li-ion batteries

Zhang Junbo,Zhang Haikuo,Weng Suting,Li Ruhong,Lu Di,Deng Tao,Zhang Shuoqing,Lv Ling,Qi Jiacheng,Xiao Xuezhang,Fan Liwu,Geng Shujiang,Wang Fuhui,Chen Lixin,Noked Malachi,Wang Xuefeng,Fan Xiulin

Elevating the charging cut-off voltage is one of the efficient approaches to boost the energy density of Li-ion batteries (LIBs). However, this method is limited by the occurrence of severe parasitic reactions at the electrolyte/electrode interfaces. Herein, to address this issue, we design a non-flammable fluorinated sulfonate electrolyte by multifunctional solvent molecule design, which enables the formation of an inorganic-rich cathode electrolyte interphase (CEI) on high-voltage cathodes and a hybrid organic/inorganic solid electrolyte interphase (SEI) on the graphite anode. The electrolyte, consisting of 1.9 M LiFSI in a 1:2  v / v mixture of 2,2,2-trifluoroethyl trifluoromethanesulfonate and 2,2,2-trifluoroethyl methanesulfonate, endows 4.55 V-charged graphite||LiCoO 2 and 4.6 V-charged graphite||NCM811 batteries with capacity retentions of 89% over 5329 cycles and 85% over 2002 cycles, respectively, thus resulting in energy density increases of 33% and 16% compared to those charged to 4.3 V. This work demonstrates a practical strategy for upgrading the commercial LIBs.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH · 2023 ·Vol. 30 ·期 23 ·64547-64564 · IF 5.8

Study on the resourceful reuse in SBS-modified asphalt of waste bagasse fibers based on green modification with tannic acid and FeOOH

Yang Ling,Han Fuhu,Muhammad Yaseen,Liu Yu,Zhao Zhenxia,Kong Hao,Li Jing,Zhang Honggang

Hydrophobic modification of bagasse fibers (BFs) through a green approach can promote its reuse in asphalt and enhance the utilization value of agricultural and forestry waste in road engineering. In contrast to traditional chemical modification, this study reports a new method for the hydrophobic modification of BFs using tannic acid (TA) and the in situ growth of FeOOH nanoparticles (NPs), resulting in FeOOH-TA-BF, which is used to prepare styrene–butadiene styrene (SBS)–modified asphalt. The experimental results show that the surface roughness, specific surface area, thermal stability, and hydrophobicity of the modified BF are improved, which is beneficial for enhancing the interface compatibility with asphalt. Specifically, compared with BF/SBS-modified asphalt, FeOOH-TA-BF/SBS-modified asphalt exhibits 39.21% and 23.26% increase in the elastic modulus G′ and viscous modulus G″, respectively, at the optimal dosage of 2.5%, corresponding to 6.15-fold and 7.13-fold increase in the fatigue life at 2.5% and 5.0% strain respectively, and 22.0% improvement in shear resistance performance. In the meantime, 2.5-fold enhancement of the storage stability. Therefore, this study provides a simple, environmentally friendly, and efficient hydrophobic modification method that is of great significance for promoting the resource utilization of solid waste BF. Graphical Abstract

CAS / MDL: 64-17-5
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
JOURNAL OF THERMAL ANALYSIS AND CALORIMETRY · 2023 ·Vol. 148 ·期 13 ·6133-6150 · IF 4.4

Thermal runaway risk of 2,2′-azobis(2-methylbutyronitrile) under the process situations

Zhao Jihe,Hu Jiwen,Dong Yonglu,He Daguang,Gui Xuefeng,Cui Xiaohua,Tu Yuanyuan,Lin Shudong

Thermal runaway accidents have occurred mainly during storage and transportation of azo compounds because large amounts of heat were released during the course of thermal decomposition. In this study, the thermal runaway characteristics of 2,2′-azobis(2-methylbutyronitrile) (AMBN) were first comprehensively investigated via differential scanning calorimetry (DSC), accelerating rate calorimetry (ARC), and gas chromatography/mass spectrometry (GC-MS). The onset temperature ( T on ), heat of decomposition ( Q ), and adiabatic temperature rise (Δ T ad ) were determined, which were involved in the safety of storage and transportation. Corresponding thermokinetic analyses were performed using DSC and ARC data. The data obtained from the experiments and calculation were utilized to predict the self-accelerating decomposition temperature (SADT), the control temperature ( T NR ), and the emergency temperature ( T C,I ). In addition, the flammable components in the pyrolysis products of AMBN were studied, particularly mixed with incompatible materials, such as HCl, NaOH, and Fe 2 O 3 , which helped predict the risk of thermal runaway during storage and transportation. Graphical Abstract

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF MATERIALS SCIENCE-MATERIALS IN ELECTRONICS · 2023 ·Vol. 34 ·期 10 ·1-8 · IF 2.8

Simultaneous electrochemical detection of dopamine and hydrogen peroxide based on bifunctional microelectrode array

Pang Hongyu,Yin Bing,Liu Xiaobo,Jiang Tingting,Wu Shuo

Reactive oxygen species (ROS) and dopamine (DA) can serve as two important biomarkers in the diagnosis of Parkinson’s disease (PD). Due to the close relationship between DA and hydrogen peroxide (H 2 O 2 ) in the process of PD occurrence and development, the simultaneous detection of DA and H 2 O 2 is of great significance for the diagnosis and treatment of PD. In this paper, we report a high integrated bifunctional microelectrode array (MEA) for the simultaneous detection of DA and H 2 O 2 . The sensing electrodes were selectively modified with PEDOT film and Pt-black/PEDOT by electrochemical deposition for detecting DA (with a sensitivity of 38.1 nA/μM/mm 2 ) and H 2 O 2 (with a sensitivity of 45.2 nA/μM/mm 2 ), respectively. The MEA exhibited good sensitivity, selectivity and was capable of sensing both DA and H 2 O 2 simultaneously in serum without any crosstalk. This work proved the feasible of utilizing MEA for multicomponent analysis and showed great potential of MEA for in vitro analysis as well as early diagnosis of PD.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
COLLOID AND POLYMER SCIENCE · 2023 ·Vol. 301 ·期 6 ·613-622 · IF 2.4

Preparation of cross-linked poly (methyl methacrylate) microspheres by post-crosslinking method and its application in light diffusers

Shu Dan,Tu Sicong,Mai Shuting,Xu Jian,Yang Wuli

Cross-linked polymer microspheres are widely used in biomedicine, flat panel display, analytical testing, in vitro diagnostics, semiconductor chips, and light diffusion. However, the process of preparing micron-sized cross-linked polymer microspheres is complicated, and it is difficult to obtain a high crosslinking degree conveniently. In this work, we applied post-crosslinking strategy to prepare poly (methyl methacrylate) (PMMA) microspheres having a high crosslinking degree by dispersion polymerization, while the method separated the polymerization process and cross-linking process of microspheres. In the method, the silane coupling agents containing double bonds were used as the comonomer in polymerization and hydrolyzed to form Si–O–Si cross-linked structure at the later stage. The obtained microspheres are not only highly cross-linked but also have uniform particle size distribution and good thermal stability. The produced cross-linked PMMA microspheres exhibit great light diffusion properties and might be employed as a light diffusion agent in a polycarbonate matrix. Graphical Abstract We prepared the cross-linked PMMA microspheres by post-crosslinking method and mixed the cross-linked PMMA microspheres with the matrix PC to obtain the light diffusers.

CAS / MDL: 78-67-1 2530-85-0
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。