DYES AND PIGMENTS
·
2021
·
IF 4.889
You Liu,Fang Liu,Jungan Wang,Hongyan Huang,Suhao Yan,Song Gao,Lin Wang,Wei Huang,Tianshi Qin
Wide-bandgap photovoltaics (WBPV) could not only provide electrical energy by photoelectronic conversion of the invisible part of the solar spectrum, but also usually had the unique advantage of high open circuit voltage ( V oc). In this work, we reported a novel HTM based on tetrakis (N-phenothiazine) Spirobifluorene (Spiro-PT), its HOMO energy level could be well matched with MAPbBr 3 perovskite HOMO energy level. This HTM could effectively suppress nonradiative recombination, which leads to an increase in the photovoltage of WBPV to more than 1.41 V. As a result, the n-i-p mesoscopic structured WBPV achieved a champion PCE of 7.36% as well as excellent operational stability exhibiting 91% of initial efficiency after 500 h continuous illumination without encapsulation. Based on the high V oc of the MAPbBr 3 /Spiro-PT device, the photovoltaic electrochromic device showed a response speed (the average coloring time was 40 s and the bleaching time was 272 s) and high average visible light transmittance contrast (about 37% in 450–780 nm), the corresponding electrochromic device with maximum dynamic contrast up to 46% at 600 nm between bleached and colored states. This WBPV-powered electrochromic system could provide a pathway towards stand-alone smart window technique for future energy-saving buildings.
研究领域:
材料科学
·
光伏技术
·
纳米能源
·
智能窗技术
·
器件物理
✓ 已验证
DOI
高影响因子
ENERGY
·
2021
·
IF 7.147
Yi-Jie Zhang,Yi-Jun Gao,Xiaoge Wang,Qin Ye,Ya Zhang,Yu Wu,Shu-Han Chen,Bo Ruan,Dean Shi,Tao Jiang,Fang-Chang Tsai,Ning Ma
Sodium-ion batteries (SIBs) are highly potential for next-generation electrochemical energy storage because of their abundant resources and low prices. Transition metal dichalcogenides (TMDCs) have an excellent capacity, high electrical conductivity, and diverse structures. However, its volume expansion and tendency to restack during charge/discharge cycles lead to inferior electrochemical properties, limiting its development in the battery field. Herein, we synthesized MoO 2 /NC rods covered with MoTe 2 nanosheets on the surface (MoTe 2 @MoO 2 /NC) by a high-temperature solid-phase synthesis method based on Mo-MOF a sacrificial template for sodium-ion batteries. The MoO 2 core enhances the electron transfer efficiency as a conductive backbone and prevents the volume expansion of MoTe 2 nanosheets. Meanwhile, the MoTe 2 nanosheets are tightly wrapped around the MoO 2 core, significantly reducing the ion diffusion path. Furthermore, the C and N doped substrates with conductivity ensure the integrity of the structure and enhance the conductivity of the electrodes. Benefiting from these advantages, MoTe 2 @MoO 2 /NC delivered a high electrochemical performance with high capacity (∼463.9 mAh g −1 ), superior fast-charge discharge ability (∼294.7, and 258.3 mAh g −1 at 5, and 10 A g −1 , respectively). Even at a high current density of 1 A g −1 , the specific capacity was maintained at about 328.3 mAh g −1 after 100 cycles.
研究领域:
材料科学
·
储能
·
电化学
·
纳米材料
✓ 已验证
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2026
·
IF 6.3
Qi Xia,Ning Liu,Qing Huang,Shengbing Wu,Qi Wang
The methanol oxidation reaction (MOR) remains constrained by the inadequate activity and durability of conventional Pt-based catalysts, particularly across varying pH environments. We present a plasma-tailored synthesis strategy to construct ordered PtFe alloy nanocatalysts anchored on N-doped graphene-carbon nanotube hybrids (PtFe@NGCNT). The synergistic effects of plasma-enhanced alloying and conductive 3D carbon architecture yield ultrafine PtFe nanoparticles (2.13 nm) with protective N-carbon encapsulation. This dual-phase configuration endows PtFe@NGCNT with superior pH-adaptive MOR performance: In acidic media, specific and mass activities reach 2.29 mA/cm² and 2524 mA/mg Pt , surpassing commercial Pt/C by 4.67 and 9.86 times respectively. Alkaline performance further escalates to 13.28 mA/cm² and 6602 mA/mg Pt , exceeding commercial Pt/C by 3.61 and 3.74 times. The catalyst demonstrates remarkable durability after long-term chronoamperometry test and 1000-cycle cyclic voltammetry scanning, attributed to plasma-induced defect engineering in the carbon matrix. This work establishes a universal plasma-engineering paradigm for creating robust, pH-versatile electrocatalysts, propelling the development of next-generation direct methanol fuel cells.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Materials Chemistry A
·
2026
·
IF 9.5
Xi Chen,Hang Luo,Guanghu He,Deng Hu,Fan Wang,Xiaona Li,Zhongna Yan,Dou Zhang
Electrostatic capacitors are considered the preferred candidates for high-power energy storage. The demand for electrostatic capacitors operating at high temperatures (>150 °C) has been driven by applications in electric vehicles, aerospace systems, etc. Herein, we propose a strategy of using a B–N coordination supramolecular network to construct crosslinked polymer dielectrics for improved energy storage performance at elevated temperatures and electric fields. Specifically, by incorporating 2,7-diboronic ester-9,9′-spirobifluorene (DBASBF) into the polyetherimide (PEI) matrix, B–N coordination bonds are formed between the nitrogen atoms in PEI and the boron atoms in DBASBF, leading to the formation of a supramolecular coordination network. Theoretical calculations and experimental results confirm that the formation of this supramolecular network effectively enhances mechanical robustness and suppresses charge migration. As a result, the fully organic PEI/DBASBF-0.5% composite dielectric achieves a discharged energy density of 4.52 J cm−3 at 200 °C with an energy efficiency exceeding 90%, which is increased by 139% compared with the PEI matrix and surpasses many of the currently reported polymer dielectrics. Moreover, the composite also exhibits outstanding flexibility, along with remarkable long-term reliability. This work offers a design paradigm for developing high-performance polymer dielectrics suitable for harsh environments.
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2026
·
IF 8.3
Wenyao Xue,Ziyue Wang,Hongliang Fu,Guanjie Xue,Jing Zhao,Yue Lian,Zhifeng Wang,Yongfeng Hu,Huaihao Zhang
Four-electron transfer process of oxygen evolution reaction (OER) has become a bottleneck restricting water electrolysis, due to its inherently high kinetic energy barrier. Therefore, the exploration for high-efficiency and long-term stable non-noble metal OER catalysts is crucial for sustainable energy conversion. This work designs a molten salt-mediated ball milling-pyrolysis stepwise treatment to synthesize spongy V 2 O 5 composite Fe-intercalated graphitic nitrogen (N–V 2 O 5 @FeC). Specifically, Fe-intercalated graphite is achieved using the FeCl 3 /KCl molten salt system, a highly conductive FeC substrate being constructed accordingly. Then, NH 3 generated from melamine pyrolysis enables spongy porous structure construction and N-doping. N–V 2 O 5 @FeC catalyst possesss the following advantages: First, spongy porous structure greatly increases exposure of active sites, while Fe intercalation-induced graphite edge defects and Fe–O–V bonds jointly enhance active site density of V 2 O 5 composite, thereby boosting catalyst activity. Second, N-doped carbon network improves electron transport performance, enabling catalyst's charge transfer resistance decline to 19.9 Ω. Moreover, dual stabilization mechanisms of Fe–O–V stable structure and chemical anchoring of V–O–C bonds endow the material with good structural stability under alkaline conditions. In detail, N–V 2 O 5 @FeC reaches 10 mA cm −2 current density at only 299 mV overpotential in alkaline solution, with low Tafel slope (53.0 mV dec −1 ) and 50-h stability.
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2026
·
IF 8.3
Jiabo Wang,Wenxin Wang,Zhentao Liu,Dong Wang,Yingzhi Shi,Li Chen
Rational heterointerface design is an effective strategy to improve electrocatalytic water splitting. MoP and MoS 2 show “Pt-like” activity but are limited by slow alkaline water dissociation and a high hydrogen-adsorption barrier, respectively. Here, we synthesize MoP–MoS 2 @N-doped carbon (MoP–MoS 2 @NC) heterojunctions through a cysteine-assisted multi-anion coordination and in situ carbonization route. This strategy differs from traditional phosphorization-sulfurization or post-assembly routes. l -cysteine supplies S, N, and C and directs precursor formation, inducing stepwise Mo reduction and programmable MoP/MoS 2 growth during annealing. Precise regulation of the multi-anion coordination environment is realized by adjusting the cysteine dosage, which yields optimal MoP/MoS 2 interfacial coupling. Additionally, cysteine carbonization forms conductive N-doped carbon that further improves performance. The optimized catalyst delivers 115 mV at 10 mA cm −2 and a 66.98 mV dec −1 Tafel slope with excellent stability. This study presents a concise route to multi-anion-derived heterojunction catalysts for efficient hydrogen evolution.
✓ 已验证
产品关联
DOI
高影响因子
MICROCHEMICAL JOURNAL
·
2026
·
IF 5.1
Zhonghui Li,Hongbin Pu,Zhongping Yao,Qingyi Wei
Aflatoxin B 1 (AFB 1 ), the most potent natural carcinogen, poses a serious threat to food security and human health. Hence, monitoring and controlling AFB 1 levels in food is of paramount importance. Nitrogen-doped carbon dots (N-CDs) exhibit great potential for sensing applications, but their single-intensity signals are often susceptible to interference. Covalent organic frameworks (COFs) have been widely applied in sensing and adsorption. By integrating N-CDs with COFs, a hybrid material named N-CDs/COF TAPB-DMTP was constructed as a ratiometric fluorescent probe for AFB 1 detection. The sensing platform not only retains the exceptional optical properties of N-CDs but also incorporates the superior adsorption capabilities of COFs. Here, N-CDs/COF TAPB-DMTP showed outstanding sensitivity with a remarkably low detection limit of 0.0876 ng/mL and a linear range from 0.5 to 100 ng/mL. The developed sensor also exhibited excellent reproducibility, anti-interference capability, and stability. In spiked food samples, satisfactory recovery rates of 90.00% to 126.00% were achieved. Furthermore, the probe accurately distinguished between AFB 1 -positive and negative peanuts, matching results from colloidal gold test cards and ELISA. Owing to its high surface area and selective sites, this composite showed an outstanding AFB 1 adsorption capability of 91.7431 mg/g. Density functional theory (DFT) calculations were employed to elucidate the adsorption mechanism between COF TAPB-DMTP and AFB 1 , which was shown to involve weak hydrogen bonds and π-π stacking interactions. Overall, a new dual-function platform has been constructed for the highly sensitive monitoring and efficient elimination of AFB 1 , offering a low-cost and simple-operating strategy with significant potential for food safety control.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Environmental Chemical Engineering
·
2026
·Vol. 14
·期 3
·122227
·
IF 7.5
Ying Han,Wanqing Zhao,Xiaoping Zheng,Chuwei Li,Lingyun Tang,Tengfei Zhang,Yawei Xie,Hongyuan Liu
In this study, nFe and Fe 3 O 4 composites (nFe@Fe 3 O 4 ) were prepared for the efficient removal of N -nitrosodimethylamine (NDMA) and triclosan (TCS) in water. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) showed that nFe@Fe 3 O 4 consisted of a core of Fe 3 O 4 surrounded by a layer of spherical nFe. nFe@Fe 3 O 4 exhibited significantly reduced agglomeration, looser structure, slower passivation, and enhanced stability compared to nFe. nFe@Fe 3 O 4 exhibited excellent performance in the removal of NDMA and TCS. Under optimal conditions, the nFe@Fe 3 O 4 system achieved 99.9% removal of both NDMA and TCS after 72 h, significantly outperforming the nFe system alone. It also resisted interference from different pH values and ionic conditions well. The results of product analysis and density functional theory (DFT) calculations revealed that the removal of NDMA in nFe@Fe 3 O 4 was attributed to the cleavage of N=O and N-N bonds. Removal of TCS resulted from chlorine removal and ether bond cleavage. The identification and verification experiments of active species showed that active hydrogen atoms (•H) in solution were responsible for the significant removal of NDMA and TCS. Catalytic hydrogenation was the primary mechanism of this reaction. The Fe(III)/Fe(II) cycle regenerated Fe(II) to slow passivation. Fe 3 O 4 improved the electron transfer and proton conductivity of nFe@Fe 3 O 4 , accelerating its corrosion and enhancing generation of •H. Additionally, nFe@Fe 3 O 4 maintained excellent removal performance under repeated use, stability testing, and real water condition.
✓ 已验证
产品关联
DOI
高影响因子
BIORESOURCE TECHNOLOGY
·
2026
·
IF 8.2
Zhenya Bao,Xinran Ji,Qiao Liu,Lei Zhang
Microbial chain elongation (CE) converts low-value substrates into medium-chain fatty acids (MCFAs), but its efficiency is often constrained by limited electron availability and incomplete elongation from C 4 to C 6 products. This study demonstrates that nitrogen-doped carbon quantum dots (NCQDs), under visible light irradiation, significantly improved CE performance and product selectivity. At 1.5 g/L NCQDs, caproate concentration increased to 3.76 g/L, representing a 276% improvement over the control, while butyrate accumulation decreased, indicating enhanced elongation toward longer-chain products. Electrochemical characterization showed that NCQDs exhibited visible light absorption, a 2.31 eV bandgap, measurable photocurrent responses, and reduced charge-transfer resistance, reflecting enhanced redox activity at the system level. Metagenomic analysis revealed increased relative abundance of Bacillus and enrichment of functional genes associated with reverse β-oxidation and fatty acid biosynthesis pathways. In addition, quorum sensing-related genes ( LuxI, LuxR, RpfF ) and Hnd hydrogenase-associated gene clusters were enriched, indicating enhanced functional potential for microbial coordination and redox-related metabolism. These coordinated shifts in electrochemical behavior, microbial community composition, and functional gene abundance were consistent with improved caproate production and metabolic selectivity. This work provides an effective hybrid photochemical-microbial strategy associated with enhanced MCFAs production and offers a promising approach for waste valorization into value-added biochemicals.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ChemNanoMat
·
2026
·Vol. 12
·期 3
·e202500634
·
IF 2.6
Jie Gao,Yan Wu,Guozheng Lv,Mengyang Li,Wei Tian,Na Du,Zhichao Zhang,Shuang Han,Feng Cao
High-entropy alloys (HEAs), composed of multiple principal elements in near-equiatomic ratios, offer vast compositional tunability and synergistic electronic interactions for heterogeneous catalysis. Here, we report a nitrogen-doped carbon nanofiber (N–CNF) encapsulated HEA catalyst, Fe 26 Co 13 Ni 24 Cr 10 Cu 17 Pd 10 @N–CNFs, synthesized via electrospinning followed by controlled thermal treatment. The resulting ~16 nm HEA nanoparticles are uniformly embedded within a conductive N-doped carbon matrix, forming a robust core–shell architecture. Despite the low Pd loading (10 at%), the catalyst achieves 99% nitrobenzene conversion with >99% aniline selectivity at 60°C—an 8.9-fold activity enhancement over Pd@N–CNFs. Furthermore, it retains >95% conversion after five consecutive reaction cycles, underscoring its excellent structural and catalytic durability. The outstanding performance arises from Pd-induced electronic modulation within the entropy-stabilized multimetallic matrix and synergistic confinement by the N-doped carbon framework. This work establishes a cost-efficient and durable HEA-based platform for selective hydrogenation, offering new insights into entropy-driven electronic regulation in multimetallic catalysts.
✓ 已验证
产品关联
DOI
高影响因子
Nanomaterials
·
2026
·Vol. 16
·期 13
·813
·
IF 4.8
Manman Zou,Xiaoling Zhuang,Qin Tian,Jili Yuan
Two-electron oxygen reduction reaction (2e−-ORR) represents a sustainable and energy-efficient approach for decentralized hydrogen peroxide (H2O2) production compared with the conventional anthraquinone process. Among various electrocatalysts, metal–nitrogen–carbon (M–N–C) materials have attracted extensive attention owing to their tunable electronic structures and favorable *OOH adsorption behavior. However, the uncontrolled pyrolysis process generally leads to structurally heterogeneous and ill-defined coordination environments, making it difficult to precisely regulate active sites and understand catalytic mechanisms. Herein, we report a single-atom catalyst (CoN@OCNT) featuring spatially confined pyridinic-N-coordinated Co single sites, synthesized by anchoring a well-defined hexapod terpyridine Co-precursor onto oxidized carbon nanotubes (OCNTs) to suppress metal aggregation during pyrolysis. Benefiting from the optimized coordination environment and enhanced mass/electron transfer, the CoN@OCNT catalyst exhibits nearly 100% H2O2selectivity over a wide potential window from −1.0 to 0.66 V versus RHE in neutral electrolyte. In situ FT-IR and Raman spectroscopy reveal a rapid *OOH-mediated reaction pathway during the 2e−-ORR process. Furthermore, membrane electrode assembly (MEA) testing demonstrates an H2O2production rate of 21.8 mol h−1gcat−1with stable operation over 80 h at 60 mA cm−2. Remarkably, at an industrially relevant current density of 300 mA cm−2, the catalyst achieves a record H2O2production rate of 70.3 mol h−1gcat−1and a salt-free H2O2concentration of 9.4 mM, highlighting its great potential for practical large-scale H2O2electrosynthesis in neutral media.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Microstructures
·
2026
·Vol. 6
·期 4
·N
·
IF 8.5
Feng Xu\u003Csup\u003E1,2,\u003C\u002Fsup\u003E,Li-Long Zhang\u003Csup\u003E2,3,\u003C\u002Fsup\u003E,Hu Li\u003Csup\u003E2\u003C\u002Fsup\u003E,Song Yang\u003Csup\u003E2\u003C\u002Fsup\u003E
Developing sustainable and atom-economical hydrogen transfer routes for constructing pharmacologically valuable quinoline scaffolds from abundant alcohol feedstocks remains a significant challenge. Herein, a tailored pyridinic-nitrogen-coordinated cobalt (Co) single-atom catalyst (Co-N/C-U) is showcased, enabling the efficient synthesis of quinoline derivatives from inexpensive and readily available 2-nitrobenzyl alcohol and various secondary or primary alcohols via a cascade hydrogen transfer process followed by annulation. Characterization confirmed that Co-N/C-U contains atomically dispersed Co centers and exhibits exceptional catalytic activity, accessing quinolines with up to 98% yield across a broad substrate scope (47 examples) with a turnover number of up to 30,808, outperforming state-of-the-art catalytic systems. This strategy demonstrates scalability to gram-scale reactions and enables the synthesis of the Cavosonstat derivative, while the pronounced stability and reusability of the catalyst further underscores its promising potential for practical implementation. Mechanistic studies revealed that the pyridinic-N-Co moiety plays a dual role, where the isolated Co sites facilitate efficient hydrogen transfer, and the neighboring pyridinic-N atoms act as basic sites to promote the key Friedländer cyclization step. Density functional theory calculations revealed that the enhanced catalytic performance of Co-N/C-U originates from its optimized pyridinic-N-Co coordination environment. This work establishes a sustainable route to a wide range of quinolines, providing a foundation for the precise design of next-generation SACs for complex organic transformations.
✓ 已验证
DOI
高影响因子