Nature Sustainability
·
2025
·
IF 27.1
Wang Yanjing,Wen Guobin,Liu Zhijuan,Thuy Nga Ta Thi,Dong Chung-Li,You Jie,Xie Chao,Du Shiqian,Zhang Fei,Liu Qie,Wei Jianrong,Cao Yu,Peng Xinda,Yuan Yahong,Wang Yanyong,Wang Shuangyin
Efficient uranium extraction from seawater has the potential to secure an abundant and reliable supply of nuclear fuel, providing affordable energy with minimized carbon emissions. Among the many extraction methods, the electrochemical route has emerged as a promising choice owing to its fast kinetics and materials regeneration. The major challenges facing this technology, however, lie in its high energy consumption, low extraction efficiency and poor selectivity. Here we show a bipolar electrochemical uranium extraction (EUE) system that combines cathodic direct electroreduction of uranium species and electrochemistry-assisted indirect uranium reduction at the anode. The EUE device operates at an ultra-low voltage of merely 0.6 V, exhibiting an efficiency of ~100% for sources with a wide range of uranium concentrations (1–100 ppm). This bipolar EUE system in natural seawater displays excellent uranium selectivity (above 85.3%), long-term stability (45 cycles), low energy consumption (1,944 kWh kg −1 U) and cost advantage (US$83.2 kg −1 U). This work opens an avenue to the electrochemical system design for sustainable recycling of different waste resources.
✓ 已验证
产品关联
DOI
高影响因子
Nano-Micro Letters
·
2022
·Vol. 14
·期 1
·1-14
·
IF 23.655
Li Xinyang,Wang Yong,Xi Kai,Yu Wei,Feng Jie,Gao Guoxin,Wu Hu,Jiang Qiu,Abdelkader Amr,Hua Weibo,Zhong Guiming,Ding Shujiang
The composite gel electrolyte with low tortuosity ion-conducting arrays (GPE/ICAs) exhibiting high room-temperature ionic conductivity (1.08 mS cm −1 ) was successfully prepared by directionally growing ice crystals and in-situ polymerization.
The stable and rapid Li + migration through ICAs in the GPE is proved by 6 Li solid-state nuclear magnetic resonance and synchrotron radiation X-ray diffraction combined with computer simulations.
Li/LiFePO 4 full cells using GPE/ICAs exhibit excellent cycle performance and high-capacity retention at wide temperature (0–60 °C), which has the potential towards all-weather practical solid-state batteries.
✓ 已验证
DOI
PubMed
高影响因子
Nano-Micro Letters
·
2022
·Vol. 14
·期 1
·1-15
·
IF 23.655
He Hongcheng,Lian Jichun,Chen Changmiao,Xiong Qiaotian,Li Cheng Chao,Zhang Ming
The high pyridine/pyrrole nitrogen-doped and carbonyl-functionalized nanosheets on flexible electrospun porous carbon nanofibers film cathode integrates the advantages of large specific surface area, strong hydrophilicity and high Zn 2+ adsorption activity.
The Zinc-ion hybrid capacitors exhibits a high capacitance retention of 99.2% over 200,000 cycles at 40 A g −1 .
A synergistic Zn 2+ storage mechanism between carbonyl and pyridine/pyrrole nitrogen atoms is proposed.
✓ 已验证
DOI
高影响因子
Nano-Micro Letters
·
2022
·Vol. 14
·期 1
·1-13
·
IF 23.655
Li Jiawen,Ji Yuchen,Song Haoran,Chen Shiming,Ding Shouxiang,Zhang Bingkai,Yang Luyi,Song Yongli,Pan Feng
The cycle performance of poly(ethylene oxide) (PEO)-based all-solid-state lithium batteries with LiCoO 2 cathode was greatly improved via coating LiCoO 2 with high-voltage stable Li 3 AlF 6 .
At the upper cutoff voltage of 4.2 V, the poor electrochemical performance is mainly originated from the structure collapse of LiCoO 2 at the surface instead of the decomposition of PEO.
When the voltage reaches 4.5 V or even higher potentials, the intensive electrochemical decomposition of PEO-based solid polymer electrolyte accelerated interfacial degradation.
✓ 已验证
DOI
高影响因子
Advanced Composites and Hybrid Materials
·
2024
·Vol. 7
·期 4
·1-11
·
IF 23.2
Ma Wencan,Lin Yan,Huang Caoxing,Amin Mohammed A.,El-Bahy Salah M.,Melhi Saad,Ragauskas Arthur J.,Fang Guigan,Huang Chen
The smart home, constructed with plenty of electronic devices, has received great attention in human life. In this system, triboelectric nanogenerator (TENG) plays an important role due to its simple preparation, high output voltage, and high energy conversion efficiency. However, the extensive usage of nondegradable polymers as the friction layer inevitably causes environmental issue, and also the conventional conductive electrode using metal may result in the accommodation of metal. Herein, a fully wood-based single electrode triboelectric nanogenerator (FW-TENG) is proposed for the first time, in which a porous structure is generated with the delignification process and the wood-based friction layer exhibited good flexibility. In addition, the FW-TENG with wood-derived carbon as the electrode delivered high output voltage, current density, and power density of 208 V (580 kV m −2 ), 167 mA m −2 , and 4.86 W m −2 , outperforming other TENGs. Furthermore, the triboelectric nanogenerator could generate different electrical signals via contacting different objects and harvest energy from various human motions. Simultaneously, the application of the FW-TENG for smart home is also demonstrated. This study may provide a green and facile strategy for fabricating the eco-friendly triboelectric nanogenerator with excellent output electrical performance and degradability.
✓ 已验证
DOI
高影响因子
Light-Science & Applications
·
2025
·Vol. 14
·期 1
·1-14
·
IF 23.4
Cai Junhu,Zhang Xiang,Chen Yu,Lai Wenzong,Ye Yun,Xu Sheng,Yan Qun,Guo Tailiang,Luo Jiajun,Chen Enguo
Multifunctional materials have attracted tremendous attention in intelligent and interactive devices. However, achieving multi-dimensional sensing capabilities with the same perovskite quantum dot (PQD) material is still in its infancy, with some considering it currently challenging and even unattainable. Drawing inspiration from neurons, a novel multifunctional CsPbBr 3 /PDMS nanosphere is devised to sense humidity, temperature, and pressure simultaneously with unique interactive responses. The carefully engineered polydimethylsiloxane (PDMS) shell enables the reversible activity of the core CsPbBr 3 , serving a dual role similar to dendrites in conveying and evaluating external stimuli with high sensitivity. Molecular dynamics analysis reveals that the PDMS shell with proper pore density enhances the conductivity in water and heat, imparting CsPbBr 3 with sensitive but reversible properties. By tailoring the crosslinking density of the PDMS shell, nanospheres can surprisingly show customized sensitivity and reversible responses to different level of stimuli, achieving over 95% accuracy in multi-dimensional and wide-range sensing. The regular pressure-sensitive property, discovered for the first time, is attributed to the regular morphology of the nanosphere, the inherent low rigidity of the PDMS shell, and the uniform distribution of the CsPbBr 3 core material in combination. This study breaks away from conventional design paradigms of perovskite core-shell materials by customizing the cross-linked density of the shell material. The reversible response mechanism of nanospheres with gradient shell density is deeply explored in response to environmental stimuli, which offers fresh insights into multi-dimensional sensing and interactive display applications.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Advanced Composites and Hybrid Materials
·
2025
·Vol. 8
·期 3
·1-16
·
IF 21.8
Wu Jun,Zhao Xinlei,Song Shangzhi,Wang Lei,Guo Yanan,Ding Jing,Mei Danhua,Wan Hui,Guan Guofeng
Efficient plasma-catalysis of CH 4 and CO 2 to value-added oxygenates remains challenging due to limited research on the activation and conversion mechanism of the * CO intermediate. The rational design of catalysts at the atomic level can improve mechanistic understanding. In this study, an atomically dispersed catalyst with diatomic Cu centers anchored on carbon nitride nanosheet is developed. The coordination structure of Cu diatoms with four N atoms and two C atoms provides a new channel for efficient charge transfer and separation, enhancing CH 4 and CO 2 conversion. Additionally, CO-DRIFT and theoretical calculations demonstrate that strong CO adsorption and the stable * CH 3 OH intermediate on Cu diatomic sites promote CH 3 OH generation. This study presents a viable strategy for designing novel diatomic catalyst for CH 4 and CO 2 conversion into value-added products, and expands understanding of the plasma-catalysis mechanism at the atomic level.
✓ 已验证
产品关联
DOI
高影响因子
Advanced Composites and Hybrid Materials
·
2025
·Vol. 9
·期 1
·8
·
IF 21.8
Yu Xiaoyang,Yan Keling,Zhou Fei,Liu Guangjun,Tian Jiaxuan,Zhuang Changfu,Wang Ying,Tian Di
Based on the features of cellulose-based carbon materials, integrating metal–organic framework (MOF) and polymers in cellulose is in favor of the electrochemical performance for supercapacitor and hydrogen evolution reaction (HER). In this work, a three dimensional (3D) porous carbon material inserted by carbon nanotubes (CNT) and Co particles was designed by an electrospinning and calcination technology. During the calcination process, MOF-74 as both nanocatalysts and carbon sources was converted to CNT and Co particles, meanwhile, CA-PVDF fibrous membranes were pyrolyzed into the porous carbon, leading to the novel multilevel structures and specific C/Co component. The type (PAN, PVDF, PVP) and mass ratio (0:1, 1:2, 2:1, 1:0) of polymers were optimized to improve the electrochemical performance. As a result, due to the rich defects from CNT, the high specific areas caused by PVDF, as well as the specific activity of Co particles, the high specific capacitance of 169.50 F g −1 was obtained at 0.5 A g −1 for CAF(2:1)CT within -1.0–0 V. CAF(2:1)C showed acceptable HER catalytic activity. Additionally, an asymmetric solid-state supercapacitor (CAF(2:1)C//CAF(2:1)CT) was built and delivered a high energy density of 25.69 Wh kg −1 , a superb cycling life during 10000 cycles, as well as a necessary practicality in circuit. This work proposed a novel hybrid biomass based carbon material, which can provide a reference for the design of electrode materials and catalysts in other fields.
✓ 已验证
产品关联
DOI
高影响因子
Advanced Fiber Materials
·
2025
·
IF 21.3
Gu Xiaoxue,Yu Yaojun,Zhong Suting,Zheng Meidan,Zhang Meng,Wang Jie,Xu Zongpu,Wan Quan,Kundu Subhas C.,Yang Mingying,Shuai Yajun
Traditional antibiotic-based therapies for treating infectious wounds often face challenges in balancing long-term biosafety, promoting wound healing, and effectively eradicating bacteria. Herein, we introduce an innovative "top-down" approach to fabricating one-dimensional (1D) pristine silk nanofibers (SNFs) by the gradual exfoliation of silk fibers, preserving their inherent semi-crystalline structure. These SNFs functioned as a robust template for the in situ growth of two-dimensional (2D) plum blossom-like bismuth nanosheets (BiNS), whose anisotropic morphology enhances bactericidal contact efficiency. The resulting BiNS-equipped SNFs (SNF@Bi) are assembled into membranes (SNFM@Bi) via vacuum filtration, showing superior biocompatibility, photothermal efficiency, and photodynamic activity. Furthermore, the acidic wound microenvironment or near-infrared (NIR) irradiation triggered the release of Bi 3 ⁺, exhibiting nanoenzyme-mediated catalytic activity. This multimodal mechanism allows SNFM@Bi to eliminate over 99% of Staphylococcus aureus and 100% of Escherichia coli by disrupting biofilms, inducing lysis, and causing oxidative damage. In vivo evaluations demonstrated significant bacteria clearance, accelerated angiogenesis, and enhanced collagen deposition, contributing to rapid wound healing without systemic toxicity. Notably, SNFM@Bi detaches spontaneously after healing, avoiding chronic nanomaterial retention risks. This multifunctional antimicrobial platform offers a controllable, effective, and biocompatible therapeutic strategy for antimicrobial dressing design, with potential applications in biomedicine, environmental protection, and public health. Graphical abstract
✓ 已验证
产品关联
DOI
高影响因子
Advanced Fiber Materials
·
2025
·
IF 21.3
Jia Gaoen,Yue Xiaoyan,Duan Lingmeihui,Yin Rui,Pan Caofeng,Liu Hu,Liu Chuntai,Shen Changyu
Achieving human skin-like sensitivity and wide-range pressure detection remains a significant challenge in the development of wearable pressure sensors. In this study, we engineered and fabricated a fibrous polyimide fiber (PIF)/carbon nanotube (CNT) composite aerogel with a gradient structure using a layer-by-layer freeze casting technique, aiming to overcome the limitations of traditional pressure sensors. Finite element analysis (FEA) reveals that this innovative gradient structure mimics the unique microstructure of human skin, enabling the sensor to detect a broad spectrum of pressure stimuli, ranging from subtle pressures as low as 10 Pa to intense pressures up to 1.58 MPa with exceptional sensitivity. Moreover, the sensor exhibits extraordinary pressure resolution across the entire pressure range, particularly at 1 MPa (0.001%). Additionally, the sensor demonstrates remarkable thermal stability, operating reliably across a wide temperature range from − 150 to 200 °C, making it suitable for extreme environments such as deep space exploration. When integrated with machine learning algorithms, the sensor shows great potential for real-time physiological monitoring, fitness tracking, and motion recognition. The proposed gradient fibrous pressure sensor, with its high sensitivity and resolution over a wide pressure range, paves the way for new opportunities in human–machine interaction. Graphical abstract
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF POROUS MATERIALS
·
2025
·
IF 3.2
Qian Yi,Jiang Qingqing,Xiang Shimeng,Lu Zhenhao,Xu Xiaowen,Yang Jing,Dai Guoliang,Song Ruifeng,Jiang Ji
Separating CO 2 and N 2 from CH 4 is crucial for energy production and environmental protection. This study showed the rapid synthesis of CHA zeolites with different morphologies using an in situ growth method, without the assistance of organic structure directing agents (OSDA) or fluoride media. The crystallization behavior of CHA zeolites was studied in terms of synthesis gel composition (including water content, silicon and aluminum content, alkalinity and Sr 2+ concentration), synthesis temperature and duration. The results suggested that pure phase CHA zeolite nano-aggregates could be synthesized with broad precursor conditions at 150 °C for only 4 h. Then, K-CHA zeolite was ion-exchanged to Na-CHA and Ca-CHA and the adsorption properties of CHA zeolites with different morphologies and ions were studied. The results suggested that Na-CHA exhibited highest CH 4 , CO 2 and N 2 adsorption capacity and showed higher ideal selectivity for N 2 /H 2 ; Although Ca-CHA zeolites exhibited relative lower CO 2 and CH 4 adsorption capacity, it exhibited the highest ideal selectivity for CO 2 /CH 4 ; Simultaneously, K-CHA zeolite exhibited high CH 4 adsorption capacity and high adsorption separation ability of CH 4 /N 2 . Furthermore, breakthrough experiments have confirmed the practical feasibility of separating CO 2 from CH 4 .
✓ 已验证
产品关联
DOI
高影响因子
WOOD SCIENCE AND TECHNOLOGY
·
2025
·Vol. 59
·期 6
·1-18
·
IF 3
Tao Xin,Fang Xiaoyang,Wu Shuangshuang,Shao Chuang,Xu Wei
Natural bamboo (NB) has inherent limitations, such as low thermal conductivity, tendency of hygroscopic expansion, and susceptibility to mold and mildew attack, which hampers its high value-added applications. This study developed high-performance bamboo-based polymer composites (BPC) by a delignification process combined with impregnation of AlN/BN-Epoxy resin. The thermal conductivity of BPC increased by 155.7% to 0.358 W/(m·K), as compared with NB, whereas hydrophobic modification of the surface reduced the hygroscopic volume expansion to below 3%. Application of pressure optimized the distribution of resin and interfacial bonding that could achieve a tensile strength of 115.61 MPa (10.2% increase compared to NB). Further, BPC showed improved thermal stability with peak pyrolysis temperature of 367.3 °C. Micromorphological analysis confirmed that continuous thermally conductive networks were formed by the alignment of AlN/BN filler in the epoxy matrix. Meanwhile, X-ray photoelectron spectroscopy (XPS) showed the presence of hydrophobic C-F bonds on the modified surfaces. This multi-scale approach could successfully overcome the limitations of bamboo’s performance, endowing BPC with combined thermal capabilities, mechanical strength, and environmental durability. These advancements make BPC a sustainable alternative to conventional underfloor heating substrates and heat dissipation components.
✓ 已验证
产品关联
DOI
高影响因子