文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第3385至3396个,产品总数5,005个

切换升序
4
IONICS · 2023 ·Vol. 29 ·期 4 ·1479-1486 · IF 2.8

Facile synthesis of TiO1.77(OH)0.46·0.2 H2O and TiO2 and their applications for aqueous ammonium-ion battery

Liu Yang,Chen Han,Lou Xiaoming,Wen Xiaoyu,Yin Zhenguo,Xiang Kaixiong

Rechargeable aqueous ammonium-ion batteries (AAIBs) have attracted more and more attention in energy storage devices because of great safety and cost-effectiveness, as well as excellent rate capability. Recently, it is the main exploration focus for the further improvement of AAIBs to develop suitable electrode materials. Herein, titanic acid and TiO 2 were simply synthesized by the facile co-precipitation approach. Titanic acid showed higher capacity of 104.5 mAh g −1 at the 0.1 A g −1 current density, and higher cyclability with the 91.2% capacity retention cycled 1000 cycles at 1 A g −1 . Titanic acid is promising as aqueous ammonium-ion batteries with great stability and capacity.

CAS / MDL: 7550-45-0
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL PAPERS · 2023 ·Vol. 77 ·期 6 ·3347-3359 · IF 2.2

Novel CO2-based low-molecular weight poly (propylene carbonate) diol (PPCD) for two-component polyurethane adhesive

Wang Chaozhi,Li Hualin,Huang Zhenhong,Ding Zhu,He Zonglin,Liu Baohua,Ai Jiaoyan,Song Lina

The subject of this study was the application of a novel CO 2 -based low-molecular weight poly (propylene carbonate) diol (PPCD) in the field of adhesive. Two-component polyurethane adhesive (PPCD-PU) was prepared with PPCD and polymethylene polyphenyl polyisocyanate (PAPI) as raw materials, propylene carbonate diol (PCD-EDA) as extender. The effects of the molecular weight, carbonate linkage content of PPCD and content of PCD-EDA on the properties of PPCD-PU were also investigated. The results showed that the novel CO 2 -based low-molecular weight poly (propylene carbonate) diol had higher carbonate linkage content (35%). The PPCD-PU synthesized by the PPCD had good adhesion performance, and the lap shear strength reached to 15 MPa. The addition of PCD-EDA not only improved the bonding properties of the adhesive, but also made PPCD-PU adhesive achieved higher lap shear strength in a shorter curing time. When the amount of PCD-EDA was 20 wt.%, the lap shear strength increased to 17 MPa, and the lap shear strength increased significantly from 3.7 to 10.6 MPa after curing at 80 °C for 30 min. Water absorption rate of PPCD-PU film was about 1.7%, and the lap shear strength was almost unchanged after 24 h of immersion in water. The temperature of 5%-weight loss of PPCD-PU was 284 °C, and the glass transition temperature was 79.3 °C. All the polyurethane adhesives obtained performed good heat and water resistance.

CAS / MDL: 77-58-7
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Tungsten · 2023 · IF 6.6

Polyoxometalates-derived ternary metal oxides electrocatalyst for N2 reduction under ambient conditions

Yang Meng-Le,Jin Zhong-Xin,Cao Xi-Xian,Wang Xin-Ming,Ma Hui-Yuan,Pang Hai-Jun,Yang Gui-Xin

Accelerating the breaking of the nitrogen nonpolar bond (N≡N) is an important factor to improve the efficiency of the electro-catalytic nitrogen reduction reaction (e-NRR). In this work, polyoxometalates-derived FeMo-based ternary oxide materials MoO 2 -Mo 4 O 11 -FeMoO 4 @ X (abbreviated as MoFeO@ X , X represents the synthesis temperature of 650, 750 and 850 °C) were designed and synthesized for e-NRR under ambient conditions. The scanning electron microscopy images of MoFeO@750 show an ellipsoidal-like structure (0.86 × 0.6 μm). The relatively large specific surface area, formation of multiple interfaces, together with the synergistic effect of iron and molybdenum bimetals, would make MoFeO@ X catalyst more easily absorb and activate N 2 in the e-NRR. Expectedly, the synthesized MoFeO@750 shows an optimal NH 3 production rate of 16.57 μg·h −1 ·mg cat. −1 and Faradaic efficiency of 12.33% at − 0.3 V versus reversible hydrogen electrode (νs. RHE), with outstanding electrochemical and structural stability.

CAS / MDL: 18868-43-4
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Electronic Materials Letters · 2023 ·Vol. 19 ·期 6 ·554-563 · IF 2.4

Thermal Management Performance of Epoxy Composites with Boron Nitride and Boron Phosphide Hybrid Fillers

Wang Yi,Wang Kai,Hu Jiajun,Si Kang,Xia Hongyan

Thermal interface materials with high thermal conductivity are the best choice to solve the current overheating problem of electronic devices, and the choice of thermal conductive filler is a key factor affecting the performance of thermal interface composites. Hexagonal boron nitride sheet is considered to be ideal thermal conductive filler, but the thermal conductive effect of single filler is still insufficient to meet actual needs. Here, a new type of hybrid filler mixed with boron nitride sheet and boron phosphide particles is used to prepare epoxy based composites. When the filler volume fraction is 40%, the thermal conductivity of composites reaches 3.18 W m −1  K −1 . Under the same content, the thermal conductivity of the composites with mixed fillers outperforms those with boron nitride sheet alone. At the same time, the composite material shows high breakdown strength of 46 kV mm −1 . This work provides a new way to prepare thermal interface materials with high thermal conductivity for modern electronic packaging. Graphical Abstract

CAS / MDL: 13308-51-5
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF SOLID STATE ELECTROCHEMISTRY · 2023 ·Vol. 27 ·期 6 ·1493-1500 · IF 2.5

Facile construction of the stable layer on the surface of Si/C electrode assisted by SWCNT coating

Chang Zenghua,Mou Lisha,Shao Zechao,Ou Mei,Fan Tianchi,Li Bin,Wu Shuaijin,Wang Rennian,Wang Jiantao

Silicon as one of the most promising anode materials suffers from its low electronic conductivity and large volume changes during the lithiation/delithiation processes, resulting in a huge capacity fading upon cycling. Herein, we design a single-wall carbon nanotube (SWCNT) coating on the silicon/carbon (Si/C) electrode to improve its cycling performance. By this simple configuration, the commercial Si/C electrode delivers a high reversible capacity of 653.8 mA h g −1 at current density of 65 mA g −1 and exhibits excellent cycling stability with capacity retention 79.8% after 150 cycles. As expected, the SWCNT layer on the surface of electrode improves the electronic conductivity of the electrode and serves as a barrier layer to prevent the electrode surface from cracking and delaminating, which gives the best reversible capacity and longer life cycle. This design can eliminate much more complicated processes for providing some potential in commercial applications.

CAS / MDL: 616-38-6
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
MEDICINAL CHEMISTRY RESEARCH · 2023 ·Vol. 32 ·期 6 ·1087-1097 · IF 2.6

Design, synthesis, and anti-aging effect evaluation of urolithin B and its amide derivatives on nematode Caenorhabditis elegans

Chen Xi,Feng Xiaoqing,Kong Xiangming,Wang Hecheng,Liu Tianwen,Tang Long,Zhuang Ziheng

Aging is a natural process, but with the increase of people’s average life expectancy, aging has brought great economic pressure and social burden to many countries and regions. As urolithin B (UB) is a natural metabolite, it has shown positive effects in many disease studies, such as obesity, diabetes, osteoporosis, cancer, learning and memory disorders, and other diseases. This inspired researchers to further study and application of UB as a potential anti-aging drug. In this study, 13 amide derivatives of UB were designed and synthesized, and their anti-aging and biosafety were verified using Caenorhabditis elegans ( C. elegans ). C. elegans is a powerful model organism for anti-aging research. Finally, our results showed that Cpd. 11 had the best anti-aging activity among the thirteen amide derivatives, and the compound had good biosafety. Therefore, Cpd. 11 has the potential to be used as an anti-aging drug and needs to be further developed and applied. Graphical abstract

CAS / MDL: 68-12-2 67-64-1
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Cancer Nanotechnology · 2023 ·Vol. 14 ·期 1 ·1-16 · IF 5.7

Aptamer modified Ti3C2 nanosheets application in smart targeted photothermal therapy for cancer

Bai Zhiqiang,Zhao Lu,Feng Haidi,Xin Zhihui,Wang Chaoyu,Liu Zhixiong,Tian Maozhong,Zhang Haifei,Bai Yunfeng,Feng Feng

Background Ti 3 C 2 is a type of transition metal carbides and nitrides (MXenes) with high light-to-heat conversion efficiency property, which has been widely used in cancer treatment recently. In fact, active targeting delivery of MXenes nanomaterials with targeting molecule could enhance the therapeutic efficacy. However, targeted therapy of MXenes has not been further studied in the past. Aptamers (Apt) with excellent affinity and high specificity properties have been widely used as targeting tools. Predictably, the incorporation of Apt into Ti 3 C 2 nanomaterials will offer an unprecedented opportunity in the research fields of cancer targeted therapy. Results Transmembrane glycoprotein mucin 1 (MUC1) is overexpressed on the surface of MCF-7 cells, and MUC1 Apt (Apt-M) could target MCF-7 cells with high affinity and specificity. Here, a smart targeting nanotherapeutic system Ti 3 C 2 /Apt-M was fabricated, which could specifically recognize and enter in MCF-7 cells. Benefitting from the desirable targeted performance of Apt-M, MCF-7 cells completed the ingestion process of Ti 3 C 2 /Apt-Mf nanosheets within 4 h, and Apt-M facilitated the entry of the Ti 3 C 2 /Apt-Mf nanosheets into MCF-7 cells. Besides, Ti 3 C 2 /Apt-M nanosheets exhibited the potential as an outstanding photothermal agent (PTA) because of the photothermal performance inherited from wrapped Ti 3 C 2 nanosheets. As demonstrated, upon 808 nm laser irradiation, the Ti 3 C 2 /Apt-M nanotherapeutic system displayed a satisfactory antitumor effect by targeted photothermal therapy both in vitro and in vivo. Conclusion This study provides a new idea for the development of MXenes nanotherapeutic system with high active targeting performance. Graphical Abstract

CAS / MDL: 25952-53-8 6066-82-6
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
MOLECULAR MEDICINE · 2023 ·Vol. 29 ·期 1 ·1-21 · IF 5.7

The promotion action of AURKA on post-ischemic angiogenesis in diabetes-related limb ischemia

Bai Tao,Li Mingxing,Liu Yuanfeng,Qiao Zhentao,Zhang Xusheng,Wang Yafeng,Wang Zhiwei

Background Diabetes-related limb ischemia is a challenge for lower extremity amputation. Aurora Kinase A (AURKA) is an essential serine/threonine kinase for mitosis, while its role in limb ischemia remains unclear. Method Human microvascular endothelial cells (HMEC-1) were cultured in high glucose (HG, 25 mmol/L d -glucose) and no additional growth factors (ND) medium to mimic diabetes and low growth factors deprivation as in vitro model. Diabetic C57BL/6 mice were induced by streptozotocin (STZ) administration. After seven days, ischemia was surgically performed by left unilateral femoral artery ligation on diabetic mice. The vector of adenovirus was utilized to overexpress AURKA in vitro and in vivo. Results In our study, HG and ND-mediated downregulation of AURKA impaired the cell cycle progression, proliferation, migration, and tube formation ability of HMEC-1, which were rescued by overexpressed AURKA. Increased expression of vascular endothelial growth factor A (VEGFA) induced by overexpressed AURKA were likely regulatory molecules that coordinate these events. Mice with AURKA overexpression exhibited improved angiogenesis in response to VEGF in Matrigel plug assay, with increased capillary density and hemoglobin content. In diabetic limb ischemia mice, AURKA overexpression rescued blood perfusion and motor deficits, accompanied by the recovery of gastrocnemius muscles observed by H&E staining and positive Desmin staining. Moreover, AURKA overexpression rescued diabetes-related impairment of angiogenesis, arteriogenesis, and functional recovery in the ischemic limb. Signal pathway results revealed that VEGFR2/PI3K/AKT pathway might be involved in AURKA triggered angiogenesis procedure. In addition, AURKA overexpression impeded oxidative stress and subsequent following lipid peroxidation both in vitro and in vivo, indicating another protective mechanism of AURKA function in diabetic limb ischemia. The changes in lipid peroxidation biomarkers (lipid ROS, GPX4, SLC7A11, ALOX5, and ASLC4) in in vitro and in vivo were suggestive of the possible involvement of ferroptosis and interaction between AUKRA and ferroptosis in diabetic limb ischemia, which need further investigation. Conclusions These results implicated a potent role of AURKA in diabetes-related impairment of ischemia-mediated angiogenesis and implied a potential therapeutic target for ischemic diseases of diabetes.

CAS / MDL: 56570-89-9
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
CHEMICAL PAPERS · 2023 ·Vol. 77 ·期 8 ·4633-4642 · IF 2.2

Preparation of stably luminescent perovskite quantum dots/acrylate copolymer composite applicable in animated display

Li Rongfa

Animated displays and fluorescent devices are researched for fashion media. In this work, perovskite nanocrystals (PNCs)/copolymer composite with high luminescent intensity and stability was prepared. Two composites bearing PNCs (various polymer matrices) were fabricated via drop-coating method. Micro-/nano-structure, crystallization, and light absorption/photoluminescence (PL) traits of PNCs were characterized. PNCs/poly(methyl methacrylate- co -butyl acrylate) (PMMA- co -PBA) composite shows a better film-forming property than PNCs/polymethyl methacrylate (PMMA) composite. PL-emission properties of PNCs/copolymer composite are comparable to PNCs, including the maintained emission wavelength (~ 521 nm) and narrow emission half-peak width. For high fluorescent stability after air/ultraviolet aging, PNCs/copolymer composite is superior to PNCs and PNCs/homopolymer composite. PNCs/copolymer composite shows a PL intensity of ~ 90% after air aging for 40 days (~ 80% after ultraviolet aging for 120 h). Luminescent film devices via PNCs/copolymer composite were studied, and effective green-/white-light emissions were achieved. The present white-light emission is close to the international standard. This work might enable a large-scale preparation of quantum dots/polymer composites for luminescent devices.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Microbial Cell Factories · 2023 ·Vol. 22 ·期 1 ·1-11 · IF 6.4

Highly efficient bioconversion of icariin to icaritin by whole-cell catalysis

Lin Yu,Chen Wen-wen,Ding Bo,Guo Man,Liang Meng,Pang Hao,Wei Yu-tuo,Huang Ri-bo,Du Li-qin

Background Icaritin is an aglycone of flavonoid glycosides from Herba Epimedii. It has good performance in the treatment of hepatocellular carcinoma in clinical trials. However, the natural icaritin content of Herba Epimedii is very low. At present, the icaritin is mainly prepared from flavonoid glycosides by α-L-rhamnosidases and β-glucosidases in two-step catalysis process. However, one-pot icaritin production required reported enzymes to be immobilized or bifunctional enzymes to hydrolyze substrate with long reaction time, which caused complicated operations and high costs. To improve the production efficiency and reduce costs, we explored α-L-rhamnosidase SPRHA2 and β-glucosidase PBGL to directly hydrolyze icariin to icaritin in one-pot, and developed the whole-cell catalytic method for efficient icaritin production.Results The SPRHA2 and PBGL were expressed in Escherichia coli, respectively. One-pot production of icaritin was achieved by co-catalysis of SPRHA2 and PBGL. Moreover, whole-cell catalysis was developed for icariin hydrolysis. The mixture of SPRHA2 cells and PBGL cells transformed 200 g/L icariin into 103.69 g/L icaritin (yield 95.23%) in 4 h in whole-cell catalysis under the optimized reaction conditions. In order to further increase the production efficiency and simplify operations, we also constructed recombinant E. coli strains that co-expressed SPRHA2 and PBGL. Crude icariin extracts were also efficiently hydrolyzed by the whole-cell catalytic system.Conclusion sCompared to previous reports on icaritin production, in this study, whole-cell catalysis showed higher production efficiency of icaritin. This study provides promising approach for industrial production of icaritin in the future.

CAS / MDL: 489-32-7 113558-15-9
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
JOURNAL OF MATERIALS SCIENCE · 2023 ·Vol. 58 ·期 13 ·5773-5787 · IF 4.5

Copper-induced synthesis of versatile FeOx nanozymes for catalytic cancer therapy

Qi Cheng,Wang Wen-Han,Zheng Jin-Fan,Jiang Li-Wen,Meng Chao,Liu Hong,Wang Jian-Jun

The recent advancement of nanocatalysis offers great promise for cancer therapy, and the development of efficient nanozymes for catalytic biological reactions is highly desirable, but still challenging. Herein, we report the synthesis of ultra-small FeO x nanozymes which is enabled by the introduction of Cu 2+ . The obtained nanozymes exhibit versatile catalytic activities integratively for effective cancer treatment. In particular, the as-synthesized nanozymes display pH-dependent peroxidase (POD)-like catalytic activity and approach the optimal performance at around pH = 4, endowing it with the possibility for the precise treatment of tumors with acidic microenvironment. Furthermore, the FeO x nanozyme possesses a promising glutathione (GSH) depleting capability and allows to reverse the abnormal GSH level in the tumor issues. Additionally, the fabricated nanozymes are able to catalyze the decomposition of hydrogen peroxide (H 2 O 2 ) to O 2 , allowing to alleviate the hypoxic environment of the tumors and improving the function of immune system for the treatment of tumors. More importantly, the FeO x nanozymes showed remarkable stability and maintained the enzymatic activity after six months in storage. Collectively, the FeO x nanozyme was demonstrated as a promisingly effective nanomedicine for tumor treatment by 4T1 cells, providing insight into the rational design of efficient nanozymes for cancer treatment. Graphical abstract

CAS / MDL: 54827-17-7 28752-68-3
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF SOL-GEL SCIENCE AND TECHNOLOGY · 2023 ·Vol. 106 ·期 2 ·616-625 · IF 2.5

The structural evolutions and enhanced thermal stability of Al cation-modified silicon oxycarbide ceramics

Wang Xuan,Qian Junjie,He Chao,Shui Anze,Du Bin

Al-doped-SiOC ceramics were fabricated via condensation polymerization and then pyrolysis of preceramic precursor in this study. The Al cation induced the formation of mullite, SiO 2 and graphitic carbon. Results showed that the incorporation of Al element enhanced the thermal stability of SiOC ceramics under Ar atmosphere via suppressing carbothermal reduction. This was consistent with the observation from Raman spectra by curve-fitting according to the D-to-G peak intensity ratio. In addition, the thermal stability of the SiAlOC ceramics under air atmosphere was also investigated. The formation of the mullite phase under the air atmosphere indicated that the SiAlOC ceramics possessed better oxidation resistance properties than the pure SiOC ceramics. This work provides a new guide to fabricating metal-modified SiOC ceramics with desired structures. Graphical Abstract The introducing Al element greatly enhanced the thermal stability of SiOC ceramics via restraining in-situ formation of SiC. The structural evolutions of Al cation-modified-SiOC ceramics both in argon and air atmospheres were investigated systematically.

CAS / MDL: 2269-22-9
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。