POWDER TECHNOLOGY
·
2019
·
IF 3.413
Qi Zhao,Xueping Gan,Kechao Zhou
Unique reinforcement strategies are explored for the development of an advanced copper-carbon composite. In this work, carbon nanotube-graphite (CNTs-Gr) hybrid-reinforced Cu matrix composites were fabricated by electroless plating assisted with ultrasonic spray atomization (EPUSA), molecular-level mixing (MLM) and spark plasma sintering (SPS). Microstructures, electrical conductivity , mechanical and tribological properties of such composites were investigated. Results demonstrated that high-efficiency strengthening was achieved by employing the decorated CNTs-Gr hybrid as reinforcement in the Cu matrix. Meanwhile, electrical conductivity, and mechanical and tribological properties of composites were improved with CNTs-Gr hybrid addition and increased with greater CNTs concentrations. This work not only proved the importance of the reticulate multiscale structure of the CNTs-Gr hybrid and interface for improving properties of the Cu-graphite composites, but also provided new insights to improve properties of the Cu-graphite composites.
✓ 已验证
产品关联
DOI
高影响因子
ChemNanoMat
·
2017
·Vol. 4
·期 2
·213-219
·
IF 2.937
Xuan Cai,Libo Shi,Hongli Zhao,Minbo Lan
Graphical It's super ! The p-n junction was introduced to electrochemical catalysts for superoxide detection. Based on the superoxide dismutase mimic activity of CeO 2 and the high electrochemical catalytic activity of CuO, a non-enzymatic superoxide sensor was established. Owing to the construction of a p-n heterojunction, the sensing performances of p-CuO/n-CeO 2 composites were further enhanced. This method could serve as an effective strategy to overcome the intrinsic defects of semiconductor catalysts and improve their applications in electrochemical sensors. The performance of electrochemical sensors is mainly limited by the intrinsic properties of electrocatalysts fabricated on the electrode. Introducing a p-n heterojunction into semiconducing electrocatalysts is an effective strategy to enhance the sensing performance. In this paper, p-n-heterojunction-based CuO/CeO 2 nanocomposites were synthesized by a simple hydrothermal process, and the effect of different Cu/Ce molar ratios was explored. p-CuO/n-CeO 2 was found to exhibit higher conductivity and electrocatalytic activity toward the target superoxide anion (O 2 .− ) when compared to both bare CuO and CeO 2 . Characterization shows that different Cu/Ce ratios in p-CuO/n-CeO 2 materials result in a considerable variation in the Ce 3+ /Ce 4+ level, and energy band gap of CeO 2 , greatly affecting the electrochemical performance of p-CuO/n-CeO 2 . Under optimized conditions, these sensors exhibit high sensitivity and low detection limit toward O 2 .− . These results demonstrate that the performance of semiconductor-based electrochemical sensors may be enhanced by the electron-transfer process of p-n junction interfaces.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL PAPERS
·
2017
·Vol. 72
·期 1
·235-250
·
IF 1.258
Duan Mei-Juan,Guan Ze-yu,Ma Yong-Wen,Wan Jin-Quan,Wang Yan,Qu Yan-Fei
In this work, effective and novel heterogeneous catalysts of Metal–organic framework MIL-101(Fe) doped with cobalt (Co 2+ ) or copper (Cu 2+ ) have been synthesized by post-synthesis method, namely Co–MIL-101(Fe) and Cu–MIL-101(Fe). The initial and metal-doped samples were tested to activate persulfate (PS) for removal of Acid Orange 7 (AO7) in water. The surface of samples were characterized using X-ray diffraction, Fourier transform infrared spectroscopy, Raman spectroscopy, N 2 adsorption, scanning electron microscopy and transmission electron microscopy. The addition of Cu 2+ and Co 2+ could alter structure characteristics of MIL-101(Fe) in crystal structure and morphology. The unusual octahedron morphology of MIL-101(Fe) turned to be irregular, disorder and a rod-like morphology was shaped. What is more, Co doping caused greater changes in structure characteristics in comparison with Cu doping. The alteration was reflected in the catalytic capacity of PS activation. An interesting note was that, whether Co or Cu doping, metal-doped MIL-101(Fe) greatly improved the PS activation as compared to unmodified MIL-101(Fe). The removal rate of AO7 was about 66, 92, 98% in MIL-101(Fe)/PS, 6%wtCu–MIL-101(Fe)/PS and 6%wtCo–MIL-101(Fe)/PS system, respectively. Some results also suggested the performance of Co–MIL-101(Fe) was superior to that of Cu–MIL-101(Fe). Additionally, a series of parameters were designed to achieve maximum capacity of PS activation. Such an enhancement in activity may be attributed to the main reasons: the new active sites created by metal additives; an increase in number of active Fe sites produced by Co and Cu doping which results in alteration of morphology and structure of catalysts.
✓ 已验证
DOI
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2017
·
IF 9.446
Piyong Zhang,Ting Song,Tingting Wang,Heping Zeng
Cu nanoparticles (NPs) are low-cost plasmonic metals and have been used for photocatalytic hydrogen evolution due to their surface plasmon resonance (SPR) effect. An efficient photocatalyst consisting of plasmonic Cu NPs on reduced graphene oxide (rGO) nanosheets support (Cu/rGO) is successfully prepared by a facile in-situ photoreduction process to form multiple nanoscale junctions for enhancement of photocatalytic hydrogen evolution. Compared to individual Cu NPs, the coupling to rGO nanosheets produces a higher photocatalytic ability with the highest H 2 evolution rate of 59 mmol g −1 h −1 for sample C , which contains 1.0 wt% of rGO nanosheets. The rGO nanosheet possesses an extremely high conductivity and, can accept and transfer photogenerated electrons with no barrier. Therefore, recombination of photoinduced charges can be efficiently suppressed and the accepted electrons can be rapidly transferred to reactive sites for H 2 evolution across its two-dimensional plane. More importantly, a near-infrared photocatalytic activity for sample C was obtained under monochromatic light irradiation at 800 and 900 nm due to the broad spectrum response of plasmonic Cu NPs. Furthermore, a possible reaction mechanism is proposed for the photocatalytic activity improvement as well as the detailed charge transfer condition.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Environmental Chemical Engineering
·
2024
·
IF 7.4
Xiaolin Shen,Zhiliang Zhu,Xiaochang Liu,Renlu Qiao,Hua Zhang,Yanling Qiu
Reutilization of spent adsorbent by converting the adsorbed organic pollutants into carbon matrix has attracted more attention in recent years, which delivers a greener way for the preparation of catalysis and environment remediation. In this work, CuBi 2 O 4 after adsorption of pollutant sulfamethazine was further transformed to a photocatalyst CBO-WC500 with high catalytic efficiency for degradation of typical pharmaceuticals. The XAFS analysis proved that Cu-C chemical bond was constructed during the preparation process. The obtained CBO-WC500 was applied to remove sulfamethoxazole (SMX) through photocatalytic Fenton-like reaction, and removal efficiency reached 88.9 % after 60 minutes with the initial 5 mg•L −1 SMX and 0.2 g•L −1 catalyst in peroxymonosulfate (PMS) system. The results showed that the introduction of carbon stem from waste improved separation of photo-generated carriers and electron transfer capability, thus more photo-induced electrons could participate in reaction with PMS. Moreover, Cu(I) and Cu(II) in CBO-WC500 with Cu-Bi-spinel structure played a vital role in PMS activation. Led by electron transportation, reactive species ( 1 O 2 , •OH, SO 4 •- ) originated from PMS contributed to degradation of SMX, and degradation pathway of target pollutant was proposed based on analysis of intermediates. Removal efficiency of CBO-WC500 for SMX kept stable after several cycles’ utilization, and it also showed decent eliminating performance of mixed pollutants in different water matrix. This study has provided a potential way for resource reuse of adsorbed pollutant and realizing reutilization of spent adsorbent as photocatalyst with higher efficiency.
✓ 已验证
产品关联
DOI
高影响因子
MICROCHIMICA ACTA
·
2024
·Vol. 191
·期 12
·1-10
·
IF 5.3
Duan Xiaoge,Shi Xinrui,He Zhaoyuan,Chen Hongcai,Shi Zhuanzhuan,Zhao Zhi,Chen Hailan,Yu Meiling,Guo Chunxian
Escherichia coli ( E. coli ) O157:H7 is an important food-borne pathogen that can cause hemorrhagic diarrhea and enteritis in humans and animals. Realizing the rapid quantitation of E. coli O157:H7 is of great significance for the guarantee of food safety and disease control. In this study, an electrochemical immunosensing technique based on a functionalized composite of Cu-metal organic framework (Cu-MOF) and poly (3,4-ethylenedioxythiophene)-poly (styrenesulfonate) (PEDOT:PSS) is developed, achieving rapid and sensitive quantitation of E. coli O157:H7 in food and clinical feces samples. The organic functionalization of Cu-MOF significantly improves the interface conductivity to facilitate electron transfer and provides the sulfonic groups (–SO 3 H) to conjugate bio-recognizing elements for target determination. The immunosensor delivers a linear detection range of 3 × 10 2 ~ 3 × 10 8 cfu/mL, a low limit of detection (LOD) of 7.4 cfu/mL, and a short analysis time of 40 min. In addition, it does not show any cross-reactivity with other common pathogens and exhibits high repeatability with relative standard deviations (RSDs) all lower than 2.09%, providing a promising approach for warranting food safety and control of E. coli O157:H7 disease. Graphical Abstract
✓ 已验证
产品关联
DOI
PubMed
高影响因子
APPLIED CATALYSIS A-GENERAL
·
2024
·
IF 4.7
Meng Liu,Caixia Miao,Zhijie Wu
The direct synthesis of methyl acetate (MA) from methanol is an appealing and green approach, but an efficient catalyst is urgently needed. Herein, Cu-Ni bimetallic clusters, with a diameter of ∼1.2 nm, have been successfully encapsulated within BEA zeolite by an in-situ two-step encapsulation method (Cu-Ni@Beta), which significantly favors the dispersion of metals compared to the ion-exchanging (Cu/Ni@Beta) and wet impregnation approach (Cu-Ni/Beta). The as-synthesized Cu-Ni@Beta catalyst shows a MA formation rate of 1.46 mmol s −1 g (Cu+Ni) −1 , which is much higher than Cu/Ni@Beta of 0.02 mmol s −1 g (Cu+Ni) −1 and Cu-Ni/Beta of 0.12 mmol s −1 g (Cu+Ni) −1 . Characterization studies reveal that zeolite constraints could not only provide the spatial confinement for metal clusters but also induce an electronic interaction between confined Cu and Ni species in Cu-Ni@Beta. This interaction can increase and stabilize Cu + sites as well as Lewis acid sites, which are crucial for improving catalytic performance. In-situ FTIR experiments indicate that the formation of formaldehyde (CH 2 O*) is the critical step for methanol to MA, and the CH 2 O* further couples with methoxy (CH 3 O*) to form acetate species (CH 3 CHO*), which subsequently couples with CH 3 O* to produce MA.
✓ 已验证
产品关联
DOI
高影响因子
NEW JOURNAL OF CHEMISTRY
·
2024
·
IF 2.7
Yuying Zhang,Na Li,Lianmei Chen,Fangrui Yu,Xueru Sheng,Jian Zhang,Qingwei Ping,Hongbin Li
Laccase immobilization is an effective way to realize the industrial application of laccase, but the loss of immobilized laccase activity is serious, which is an urgent problem to be solved. In this study, a novel laccase immobilization material was prepared by mixing waste Mn–Cu-loaded activated carbon with cellulose solution and regenerated in hydrochloric acid solution, which significantly improved the immobilized laccase activity. The optimum immobilization conditions (T, pH and initial laccase concentration) of Mn–Cu-AC/cellulose beads (Mn–Cu-ACC) for laccase were studied by the response surface method. Under the optimum conditions (T = 43 °C, pH = 4.0 and c = 6.8 g L−1), immobilized laccase (Laccase@Mn–Cu-ACC) showed excellent performance in terms of pH stability, thermostability and storage stability. And the enzyme activity of the laccase immobilized on the Mn–Cu-ACC carrier remarkably increased by 29.6% compared to that of the ACC. At last, the Laccase@Mn–Cu-ACC was used for the degradation of bisphenol A (BPA). Under the optimum conditions (t = 5.5 h, T = 45 °C, pH = 4.0 and initial cBPA = 70 mg L−1), the removal rate of BPA reached 72.3% in the first cycle, and after 5 cycles of reusing the immobilized laccase, the relative removal rate of BPA was retained at 53.2% of the initial removal rate. This study developed a new type of immobilized laccase carrier and provided a new path for the application of waste heavy metal loaded activated carbon.
✓ 已验证
产品关联
DOI
高影响因子
MICROCHIMICA ACTA
·
2024
·Vol. 192
·期 1
·1-13
·
IF 5.3
Liu Junjie,Wu Shengxi,Zhang Lu,Zhang Mingjun,Wu Haotian,Shi Miwan,Weng Yuan,Ye Wenqiao,Gu Kui
A novel proposal is introduced with an unlabeled electrochemical immunosensor for the detection of tumor broad-spectrum biomarker vascular endothelial growth factor (VEGF165) Copper-based metal organic frameworks (Cu MOFs)-carbon nanotubes (MWCNTs) were employed as its substrates, functionalized with methylene blue (MB) for signal enhancement. Cu-MOFs-MWCNTs nanocomposites were synthesized successfully via a solvothermal method and were then deposited on the surface of a glassy carbon electrode (GCE), with the addition of methylene blue to amplify the signal. Due to the expansive specific surface area provided by the carbon nanotubes and the amino groups facilitated by the metal–organic framework nanomaterials, the anti-VEGF165 monoclonal antibody was immobilized on the electrochemical immunosensor through covalent bonding, which could bind specifically to VEGF165, thereby causing a detectable change in the current. The developed immunosensor exhibited a linear detection range for VEGF165 spanning from 1 to 100,000 pg/ml, with the R 2 value of 0.997 by differential pulse voltammetry (DPV) method, and the limit of detection was as low as 0.9686. Additionally, the electrochemical immunosensor presented commendable selectivity, availability, and reproducibility, along with an effective capacity for detecting VEGF165 in clinical samples. Consequently, the immunosensor is expected to revolutionize early screening for VEGF165-related diseases, which offer a promising, cost-effective, and precise diagnostic tool for clinical utility. Graphical
✓ 已验证
产品关联
DOI
PubMed
高影响因子
MICROCHIMICA ACTA
·
2024
·Vol. 191
·期 11
·1-11
·
IF 5.3
Xu Yuanyuan,Yin Qingqing,Du Ningjing,Yi Yinhui,Zhu Gangbing
By preparing Cu@CuO aerogel as a nanozyme which exhibits prominent peroxidase-like (POD) activity, an innovative homogeneous electrochemistry (HEC) coupled with the colorimetry dual-model sensing strategy is proposed to detect perfluorooctane sulfonate (PFOS) for the first time. Cu@CuO aerogel accelerates the oxidation process of colorless o-phenylenediamine to form yellow 2,3-diaminophenazinc (DAP), and meanwhile, DAP as an electroactive substance creates a reduction peak current upon the electrochemical measurements. Interestingly, in the presence of PFOS, the POD activity of Cu@CuO aerogel is inhibited since the specific coordination between PFOS and Cu(II) can cover the active sites, resulting in the color of the sensing system becoming light and the peak current of DAP decreasing. This innovative dual-mode detection method showed excellent electrochemical detection of PFOS in the concentration range 10.0 ~ 1125.0 nM with a limit of detection (LOD) as low as 3.3 nM and a LOD of 20.8 nM in the colorimetric detection in the range 62.3 ~ 875 nM. Furthermore, the sensor was successfully used for the analysis of real samples with an RSD value ≤ 6.5%. The successful application of this two-mode sensing method for the determination of PFOS holds promise for the detection of other contaminants in the future. Graphical Abstract
✓ 已验证
产品关联
DOI
PubMed
高影响因子
MICROCHIMICA ACTA
·
2024
·Vol. 191
·期 8
·1-11
·
IF 5.3
Tong Yanli,Chen Meng,Huang Xing,Xu Yuzhi,Zhang Lang,Yu Zhenning,Liu Si-Yang,Dai Zong
Detecting lipopolysaccharide (LPS) using electrochemical methods is significant because of their exceptional sensitivity, simplicity, and user-friendliness. Two-dimensional metal–organic framework (2D-MOF) that merges the benefits of MOF and 2D nanostructure has exhibited remarkable performance in constructing electrochemical sensors, notably surpassing traditional 3D-MOFs. In this study, Cu[tetrakis(4-carboxylphenyl)porphyrin] (Cu-TCPP) and Cu(tetrahydroxyquinone) (Cu-THQ) 2D nanosheets were synthesized and applied on a glassy carbon electrode (GCE). The 2D-MOF nanosheets, which serve as supporting layers, exhibit improved electron transfer and electronic conductivity characteristics. Subsequently, the modified electrode was subjected to electrodeposition with Au nanostructures, resulting in the formation of Au/Cu-TCPP/GCE and Au/Cu-THQ/GCE. Notably, the Au/Cu-THQ/GCE demonstrated superior electrochemical activity because of the 2D morphology, redox ligand, dense Cu sites, and improved deposition of flower-like Au nanostructure based on Cu-THQ. The electron transfer specific surface area was increased by the improved deposition of Au nanostructures, which facilitates enriched binding of LPS aptamer and significantly improved the detection performance of Apt/Au/Cu-THQ/GCE electrochemical aptasensor. The limit of detection for LPS reached 0.15 fg/mL with a linear range of 1 fg/mL − 100 pg/mL. The proposed aptasensor demonstrated the ability to detect LPS in serum samples with satisfactory accuracy, indicating significant potential for clinical diagnosis. Graphical Abstract
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF CHEMICAL TECHNOLOGY AND BIOTECHNOLOGY
·
2015
·Vol. 91
·期 5
·1378-1386
·
IF 2.349
Qiujin Jia,Dongping Li,Xuechuan Gao,Jilong Yan,Qinglin Ma,Fanjun Meng
BACKGROUND Although methyl acrylate has been graft polymerized from cellulose and functionalized with hydrazine and hydroxylamine for removal of copper and nickel ions, the adsorption capacity was less than 80 mg g −1 . The present work reported hydrazinolysis of cellulose-graft-polymethyl acrylate and remarkably improved adsorption capacity for Cu(II) and Ni(II) in aqueous solution. RESULTS Hydrazinolyzed cellulose-graft-polymethyl acrylate (Cell-g-PMA-HZ) has been prepared by ceric salt-initiated graft polymerization of methyl acrylate from microcrystalline cellulose surface and subsequent hydrazinolysis with hydrazine hydrate. The successful synthesis was confirmed by Fourier-transform infrared spectroscopy, 13 C-NMR, elemental analysis, scanning electron microscopy and thermogravimetric analysis. Adsorption behavior of Cell-g-PMA-HZ for Cu(II) and Ni(II) were studied through batch static adsorption processes and column chromatography methods. The influences of graft yield, initial pH, contact time and temperature on adsorption capacity of Cell-g-PMA-HZ as well as adsorption equilibrium, kinetic and thermodynamic properties were studied in detail. Kinetic adsorption can be explained by pseudo-second-order and adsorption isotherms fitted with Langmuir isotherm model, from which maximum equilibrium adsorption capacity can be derived as 229.36 mg g −1 for Cu(II) and 173.91mg g −1 for Ni(II) at 28°C. Further thermodynamic investigation indicated that adsorption of Cu(II) and Ni(II) by adsorbent Cell-g-PMA-HZ was exothermic and spontaneous under the studied conditions. CONCLUSIONS Hydrazinolysis of cellulose-graft-polymethyl acrylate has been accomplished. As an adsorbent, the prepared Cell-g-PMA-HZ was reusable and fairly efficient for removal of Cu(II) and Ni(II) from aqueous solution. © 2015 Society of Chemical Industry
✓ 已验证
产品关联
DOI
高影响因子