文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第3421至3432个,产品总数4,488个

切换升序
Cu
MATERIALS CHEMISTRY AND PHYSICS · 2014 · IF 2.129

Fabrication of magnetically recyclable Fe3O4@Cu nanocomposites with high catalytic performance for the reduction of organic dyes and 4-nitrophenol

Mingyi Tang,Sai Zhang,Xianxian Li,Xiaobo Pang,Haixia Qiu

A facile and efficient approach to synthesize Fe 3 O 4 @Cu nanocomposites using l -Lysine as a linker was developed. The morphology, composition and crystallinity of the Fe 3 O 4 @Cu nanocomposites were characterized by Fourier Transform infrared spectroscopy , transmission electron microscopy , energy-dispersive X-ray spectroscopy, and powder X-ray diffraction. In addition, the magnetic properties were determined with vibrating sample magnetometer . The surface of the Fe 3 O 4 contained many small Cu nanoparticles with sizes of about 3 nm. It was found that the Fe 3 O 4 @Cu nanocomposites could catalyze the degradation of organic dyes. The catalytic activities of the Fe 3 O 4 @Cu nanocomposites for the reduction of nitrophenol were also studied. The Fe 3 O 4 @Cu nanocomposites are more efficient catalysts compared with Cu nanoparticles and can easily be recovered from the reaction mixture with magnet. The cost effective and recyclable Fe 3 O 4 @Cu nanocomposites provide an exciting new material for environmental protection applications.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
THIN SOLID FILMS · 2014 · IF 1.867

A quartz crystal microbalance study of the adsorption kinetics of 1,2-dichloroethane on metal-organic frameworks [Cu(C24H22N4O3)]·CH2Cl2 film

Zhongshi Xu,Qi Kang,Tingting Cai,Tingting Huang,Ping Zhang,Dazhong Shen

In this work, the adsorption kinetics of 1,2-dichloroethane (DCE) on [Cu(C 24 H 22 N 4 O 3 )]·CH 2 Cl 2 metal-organic framework (Cu-MOF) film were monitored in real time by a quartz crystal microbalance technique. It is shown that the adsorption process follows closely the pseudo-second-order kinetic model. With increasing amount of DCE added, the adsorption rate constant decreases while the initial adsorption rate increases. More than half of DCE adsorbed on Cu-MOF film is reversible with respect to the concentration dilution in gas phase. The adsorption isotherms are fitted well by the Langmuir model. The pre-adsorbed N 2 at atmospheric pressure on Cu-MOF film reduces slightly the adsorption rate constant, equilibrium constant and capacity of DCE. The adsorption rates at vapor pressure of DCE are 1.2–1.8 times of those in the presence of N 2 at atmospheric pressure. With increasing film thickness, the adsorption rate constant and mass adsorbed per unit film mass decreased. For DCE adsorbed at its vapor pressure (25   °C) on Cu-MOF film with thickness of 0.251, 0.589 and 1.19   μm, the adsorption equilibrium constants are 716.5, 695.5 and 649.2   L/mol, and the saturation adsorption capacities are 6.537, 5.742 and 5.193   mmol/g, respectively. With increasing temperature, the adsorption rate constant increases, but the mass of DCE adsorbed on the adsorption equilibrium constant and capacity decreases.

CAS / MDL: 123-54-6 64-17-5 64-18-6
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CHEMICAL ENGINEERING JOURNAL · 2014 · IF 4.058

In-situ hydrothermal synthesis of Cu-SSZ-13/cordierite for the catalytic removal of NOx from diesel vehicles by NH3

Jiancheng Wang,Zhaoliang Peng,Ying Chen,Weiren Bao,Liping Chang,Gang Feng

Cu-SSZ-13/cordierite monolithic catalyst was prepared by in situ hydrothermal synthesis method. The physicochemical properties of the as-prepared Cu-SSZ-13/cordierite were investigated by X-ray diffraction analysis, scanning electron microscopy, transmission electron microscopy, N 2 -adsorption, inductively coupled plasma, X-ray photoelectron spectroscopy, and solid-state NMR techniques. The removal of nitrogen oxides (NO x ) from simulated diesel vehicle exhaust gas was performed using fixed-bed reactor. The effects of crystallization time and addition of HF during hydrothermal synthesis, reaction space velocity, and aging treatment of catalyst on the catalytic performances of NO x reduction reactions were investigated. The results indicate that the optimum crystallization time was 72   h. Highly crystalline structure of zeolite Cu-SSZ-13 was formed, in a close combination with a carrier, via one step hydrothermal process. Cu-SSZ-13/cordierite showed excellent DeNO x performance for selective catalytic reduction (SCR) and anti-aging properties in a simulated diesel exhaust gas under a high space velocity. At a high space velocity of 72,000   h −1 , the highest conversion and N 2 selectivity of 94% and 90%, respectively, were achieved. After the aging for 50   h at 720   °C, NO x reduction rate was still >80% in the temperature range of 350–550   °C. The larger height to diameter ratio of the same catalysts enhanced the NH 3 -SCR catalytic activity and broadened the active temperature window. The addition of HF increased the catalytic activity and anti-aging performance of the sample.

CAS / MDL: 112-57-2 1302-42-7
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF INDUSTRIAL AND ENGINEERING CHEMISTRY · 2013 · IF 2.145

Effect of support on the performance of Mn–Cu oxides for low temperature selective catalytic reduction of NO with NH3

Wei-guo Pan,Jie-nan Hong,Rui-tang Guo,Wen-long Zhen,Hong-lei Ding,Qiang Jin,Cheng-gang Ding,Shi-yi Guo

MnO x –CuO x /TiO 2 and MnO x –CuO x /Al 2 O 3 catalysts were prepared by sol–gel method and used for low temperature selective catalytic reduction of NO with NH 3 . The results showed that MnO x –CuO x /TiO 2 had better catalytic activity and SO 2 resistance than MnO x –CuO x /Al 2 O 3 in the temperature range of 100–250   °C. The properties of the catalysts were characterized by using XRD, N 2 adsorption, temperature programmed reduction (H 2 -TPR) and temperature programmed desorption (NH 3 -TPD). It was found that the support has a great impact on the acidity of catalyst; TiO 2 and Al 2 O 3 can promote the formation of Lewis acid sites and Brönsted acid sites respectively.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Journal of Materials Chemistry A · 2015 ·Vol. 3 ·期 45 ·22708-22715 · IF 7.443

Architecture-controlled synthesis of MxOy (M = Ni, Fe, Cu) microfibres from seaweed biomass for high-performance lithium ion battery anodes

Chunxiao Lv,Xianfeng Yang,Ahmad Umar,Yanzhi Xia,Yi(Alec) Jia,Lu Shang,Tierui Zhang,Dongjiang Yang

The increasing demand for high performance lithium ion batteries (LIBs) has aroused great interest in developing high specific capacity, cycle performance and rate capability anode materials. Transition metal oxides (TMOs) have attracted much attention as promising anode materials for rechargeable LIBs owing to their high theoretical capacity. Here, a general strategy has been developed to fabricate high-performance fibrous TMO anodes such as elemental Ni doped NiO fibre (NiO/Ni/C-F), yolk–shell structured carbon@Fe2O3 fibre (C@Fe2O3-F), and hollow CuO fibre (CuO-HF) with controllable nanostructures by using alginate microfibres as templates. The key to the formation of various TMO micro-/nano-structures is the templating ability of the natural structure of long alginate molecular chains, where the metal cations can be confined in an “egg-box” via coordination with negatively charged α-L-guluronate blocks. When tested as anode materials for LIB half cells, these fibrous electrodes deliver excellent cycling performance with no capacity decrease after 200 cycles (793 mA h g−1, NiO/Ni/C-F, 0.072 A g−1; 1035 mA h g−1, C@Fe2O3-F, 0.1 A g−1; 670 mA h g−1, CuO-HF, 0.067 A g−1), and demonstrate great rate performance at different current densities. This finding highlights a general, green and eco-friendly strategy for the scale-up production of potential high-performance TMO anodes for LIBs.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
FOOD CHEMISTRY · 2015 · IF 3.391

A sensitive fluorescent sensor for selective determination of dichlorvos based on the recovered fluorescence of carbon dots-Cu(II) system

Juying Hou,Guangjuan Dong,Zhengbin Tian,Jiutian Lu,Qianqian Wang,Shiyun Ai,Minglin Wang

In this paper, a simple and sensitive fluorescent sensor for dichlorvos was first constructed based on carbon dots-Cu(II) system. These carbon dots were obtained by simple hydrothermal reaction of feather. The fluorescence of these carbon dots can be selectively quenched by Cu 2+ ion. When acetylcholinesterase and acetylthiocholine were introduced into the system, thiocholine came into being, which can react with Cu 2+ ion and restore the fluorescence of the system. The reaction mechanism between Cu 2+ ion and thiocholine was confirmed by X-ray photoelectron spectroscopy. As one kind of acetylcholinesterase inhibitor, organophosphorus pesticides can be detected based on this sensing system. As an example of organophosphorus pesticides, dichlorvos was detected with a linear range of 6.0   ×   10 −9 –6.0   ×   10 −8   M. This sensing system has been successfully used for the analysis of cabbage and fruit juice samples.

CAS / MDL: 7558-79-4 7558-80-7
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
Journal of Energy Storage · 2024 · IF 8.9

Enhanced solar-thermal energy storage performance of NF/Ni-Cu@rGO/PEG composite phase change materials with 3D conductive network

Yuting He,Yongjin Zou,Cuili Xiang,Fen Xu,Yongpeng Xia,Yulian Chen,Shunxiang Wang,Zhicong Hu,Sijia Hao,Lixian Sun

Shape-stabilized composite phase change materials (CPCMs) with high photothermal conversion efficiency, high thermal storage capacity, and excellent thermal conductivity hold immense potential for diverse applications and market growth. This study employed a one-step substitution reaction followed by a thermal reduction technique to successfully affix Ni and Cu nanoparticles onto reduced graphene oxide (rGO) nanosheets , which were subsequently integrated into a nickel foam (NF) matrix. This process resulted in the fabrication of an NF/Ni-Cu@rGO porous carrier, facilitating the adsorption of polyethylene glycol (PEG) and the formation of CPCMs. Introducing Ni-Cu@rGO into the NF matrix enhanced the carrier framework, enabling improved PEG loading and leakage prevention. The hybridization of Ni-Cu@rGO effectively bolstered the interaction between the carrier framework and the phase change material (PCM), resulting in enhanced phase change performance. CPCMs prepared from the NF/Ni-Cu@rGO framework exhibited superior shape stability, higher thermal storage density, and enhanced recyclability than pure PCMs. Optimized CPCMs displayed melting and crystallization enthalpies of 121.13 J·g −1 and 113.44 J·g −1 , respectively. The thermal conductivity of NF/Ni-Cu@rGO/PEG CPCMs significantly improved to 0.4780 W·m −1  K −1 , representing a remarkable 315 % increase over that of PEG alone. Furthermore, the NF/Ni-Cu@rGO/PEG composite demonstrated outstanding photothermal conversion efficiency, thermal cycling stability, and exceptional shape stability. These findings offer promising prospects for its application across various fields.

CAS / MDL: 25322-68-3 34819-78-8
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ADVANCED FUNCTIONAL MATERIALS · 2024 · IF 18.5

Elucidating the Microenvironment Structure-Activity Relationship of Cu Single-Site Catalysts via Unsaturated N,O-Coordination for Singlet Oxygen Production

Pengfei Li,Yang Deng,Haiyuan Wang,Yali Luo,Yin Che,Ruijuan Bian,Ruoyun Gao,Xianfeng Wu,Zhen Zhang,Xu Wu

Understanding the microenvironment structure-activity relationship of singlet-atom catalysts (SACs) is imperative for the development of high-performance photocatalytic devices. However, the challenge remains to finely regulate the coordination microenvironment of SACs. Herein, single-atom N x ─Cu─O 4-x ( x = 1–4) photocatalysts with different coordination environments are successfully prepared based on pre-design reticular supramolecular covalent organic frameworks (COFs) for direct photocatalytic 1 O 2 production from O 2 . The results show that the high activity of Cu SACs is closely related to the N,O-coordination microenvironment, which is primarily ascribed to the different electrophilicity of the N, O atom. The electron configuration of N 3- Cu-O 1 endows photocatalyst enhanced charge transfer capability and the nearest D-band center to the Fermi level. The “end-on” type adsorption configuration of O 2 at the N 3 ─Cu─O 1 active site can promote the breaking of Cu─O bonds rather than O─O bonds. As a result, the N 3 -Cu-O 1 @COF photocatalyst exhibits the most optimal formation and desorption energies for intermediates •OOH, which provides an advantageous reaction pathway with fewer steps and a lower barrier for 1 O 2 production. This work highlights the structure-activity relationship of SACs for long-term applications.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
MOLECULES · 2024 ·Vol. 29 ·期 20 ·4860 · IF 4.2

Development of Recoverable Magnetic Bimetallic ZIF-67 (Co/Cu) Adsorbent and Its Enhanced Selective Adsorption of Organic Dyes in Wastewater

Fuyan Zhang,Miaomiao Ma,Shuang Li,Yuting Zhou,Jian Zeng,Meiqi Huang,Qi Sun,Tao Le

In the critical domain of wastewater treatment, the development of cost-effective, durable, and recyclable adsorbents with high adsorption capacities remains a significant challenge. This study introduces a novel magnetic bimetallic Metal–Organic Framework (MOF) adsorbent, MZIF-67-Co/Cu, doped with copper ions. The MZIF-67-Co/Cu adsorbent was successfully synthesized and structurally characterized, demonstrating remarkable selectivity for removing methyl orange (MO) from water. This high selectivity is attributed to the adsorbent’s high porosity and Lewis base properties at the coordinating metal ion center. The incorporation of Cu ions significantly enhances the porous architecture and increases the number of metal adsorption sites, leading to an impressive maximum MO adsorption capacity of 39.02 mg/g under optimized conditions (0.5 g/L adsorbent concentration, pH 3.0, 250 rpm agitation speed, adsorption time > 10 min). The adsorption kinetics closely follow the pseudo-second-order model, and the isotherm data fit well with the Langmuir model. The primary adsorption mechanisms involve electrostatic attraction and mesoporous interaction. This study highlights MZIF-67-Co/Cu as a highly efficient adsorbent with magnetic recovery capabilities, positioning it as a promising candidate for addressing critical issues in wastewater treatment.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY · 2024 · IF 8.1

Cu doping enhanced the performance of BaFe0.8Zr0.1Y0.1O3-δ cathode for a proton-conducting solid oxide fuel cell at low temperature

Keyao Wang,Yinghui Cui,Jiupai Ni,Chengsheng Ni

BaFe 0.8-x Cu x Zr 0.1 Y 0.1 O 3-δ (0 ≤ x ≤ 0.15) perovskite was investigated as the cathode material for low-temperature proton-conducting solid oxide fuel cells (H-SOFCs). Cu doping in BaFe 0.8 Zr 0.1 Y 0.1 O 3-δ (Cu0) improves the proton conductivity and surface exchange kinetics. The chemical bulk diffusion coefficient ( D chem ) and the chemical oxygen surface exchange coefficient ( K chem ) of BaFe 0.75 Cu 0.05 Y 0.1 Zr 0.1 O 3-δ (Cu5) and BaFe 0.7 Cu 0.1 Y 0.1 Zr 0.1 O 3-δ (Cu10) were both increased compared to Cu0. Thermogravimetric analysis (TGA) of Cu5 and Cu10 in air showed larger revsivle oxygen loss than that of Cu0. A significant improvement in current output was observed at 600 °C: cell with BaFe 0.65 Cu 0.15 Y 0.1 Zr 0.1 O 3-δ (Cu15), Cu10 and Cu5 cathode demonstrated current densities 100.7 %, 438.4 %, and 253.8 % higher, respectively, than the one with Cu0 at 0.6 V after more than 100 h of durability. This work demonstrated that the optimal Cu doping on ferrite cathode could improve the proton transport kinetics and is able to deliver a improved performance and stability for low-temperature (≤600 °C) H-SOFCs.

CAS / MDL: 12047-27-7 7782-61-8
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
SENSORS AND ACTUATORS B-CHEMICAL · 2024 · IF 8

Cu(II) coordination MOF-303 based dual-functional sensor for precisely detecting and distinguishing humidity and temperature with multifunction applications

Ke Wu,Lulu Guo,Wei Wang,Zhimin Yang,Haishun Liu

Humidity-temperature dual-functional sensors show great demand in healthcare and archaeology, requiring sensors with high sensitivity, high resolution and high stability. In this work, utilizing the post-coordination strategy, the uncoordinated N atoms in MOF-303 were used as the metal chelate sites to chelate CuCl 2 , and due to the accordion-like morphology, the obtained material shows potential in humidity sensing and temperature sensing. The CuCl 2 -MOF-303 based sensor shows whole range humidity sensing with response of 11.4 at 33 % RH and 56,700 at 95 % RH, 1 % RH of resolution and good long-term stability (>90 days), and excellent temperature sensing performance of high sensitivity (–3.3 %/°C), high linearity (R 2 >0.99) and high resolution (0.3 °C) in the temperature range of 35–38 °C. Furthermore, the application of sensor in healthcare, noncontact sensing and information transmission is verified. This study provides a preliminary exploration for the application of MOFs in humidity-temperature dual-functional sensors.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ACS Nano · 2024 · IF 15.8

Coordination Self-Assembled AuTPyP-Cu Metal–Organic Framework Nanosheets with pH/Ultrasound Dual-Responsiveness for Synergistically Triggering Cuproptosis-Augmented Chemotherapy

Jianshuai Bao,Jiefei Wang,Sudi Chen,Shiqi Liu,Zhen Wang,Weiwei Zhang,Chenhui Zhao,Yuling Sha,Xiaoyan Yang,Yusen Li,Yong Zhong,Feng Bai

Reactive oxygen species (ROS) mediated tumor cell death is a powerful anticancer strategy. Cuproptosis is a copper-dependent and ROS-mediated prospective tumor therapy strategy. However, the complex tumor microenvironment (TME), low tumor specificity, poor therapy efficiency, and lack of imaging capability impair the therapy output of current cuproptosis drugs. Herein, we designed a dual-responsive two-dimensional metal–organic framework (2D MOF) nanotheranostic via a coordination self-assembly strategy using Au(III) tetra-(4-pyridyl) porphine (AuTPyP) as the ligand and copper ions (Cu2+) as nodes. The dual-stimulus combined with the protonation of the pyridyl group in AuTPyP and deep-penetration ultrasound (US) together triggered the controlled release in an acidic TME. The ultrathin structure (3.0 nm) of nanotheranostics promoted the release process. The released Cu2+ was reduced to Cu+ by depleting the overexpressed glutathione (GSH) in the tumor, which not only activated the Ferredoxin 1 (FDX1)-mediated cuproptosis but also catalyzed the overexpressed hydrogen peroxide (H2O2) in the tumor into reactive oxygen species via Fenton-like reaction. Simultaneously, the released AuTPyP could specifically bind with thioredoxin reductase and activate the redox imbalance of tumor cells. These together selectively induced significant mitochondrial vacuoles and prominent tumor cell death but did not damage the normal cells. The fluorescence and magnetic resonance imaging (MRI) results verified this nanotheranostic could target the HeLa tumor to greatly promote the self-enhanced effect of chemotherapy/cuproptosis and tumor inhibition efficiency. The work helped to elucidate the controlled assembly of multiresponsive nanotheranostics and the high-specificity ROS regulation for application in anticancer therapy.

CAS / MDL: 68-12-2
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。