IONICS
·
2022
·Vol. 28
·期 10
·4685-4695
·
IF 2.961
Wang Jie,Xuan Haicheng,Meng Lingxin,Yang Jiangtao,Yang Jiale,Liang Xiaohong,Li Yuping,Han Peide
The development of low-cost and high-efficiency hydrogen evolution reaction (HER) electrocatalysts has become extremely essential to address global energy issues. Herein, we have fabricated arrays of nitrogen and sulfur co-doped CoMoO 4 ultrathin nanosheets grown on nickel foam (N, S-CoMoO 4 /NF 400 ). The experimental results demonstrate that modulating the electronic structure of CoMoO 4 by co-doping N and S atoms is one of the most powerful methods to boost the performance of HER. N, S-CoMoO 4 /NF 400 displays superior HER activity under alkaline environment, with overpotentials of 58 and 119 mV at 10 and 100 mA cm −2 . The excellent performance of the N, S-CoMoO 4 /NF 400 electrode proves that the N, S co-doping engineering can significantly improve the catalytic activity of transition metal-based oxide HER.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Polymer Materials
·
2022
·
IF 4.855
Zhaofei Wang,Xuemin Zhang,Wansheng Yao,Yong Dong,Baiyao Zhang,Xiaoyu Dong,Huagao Fang,Guobing Zhang,Yunsheng Ding
Thermosetting waterborne polyurethanes (WPUs) have received wide attention because of their excellent chemical resistance, mechanical properties, and low water absorption. However, their permanent network structure hinders their reprocessing applications, making it vital to prepare reprocessable thermosetting WPUs to minimize plastic pollution. Herein, for the first time, the cross-linked WPUs with excellent reprocessability were designed and synthesized by introducing covalent adaptable networks (CANs) in the form of quaternary ammonium alkyl chains. Our methodology combined CO2-triggered WPUs (CO2-triggered WPUs) with 1,6-diiodohexane. After the CO2 evaporated during film formation, the CO2-triggered WPUs left tertiary amine groups as reaction precursors, which could cross-link into a WPU CAN with 1,6-diiodohexane. All cross-linked WPUs possessed classic vitrimer performance including stress relaxation and malleability, as confirmed by stress-relaxation and hot-press tests. The results showed that cross-linked WPUs had excellent reprocessability and high mechanical properties, and the recovery ratios of the mechanical properties for the recycled samples were over 80% and the tensile strength was more than 17 MPa. More importantly, the cross-linked WPUs’ antibacterial rates of Staphylococcus aureus and Escherichia coli were 94.3 and 89.5%, respectively. This research offers a new method to synthesize high-performance WPUs via facile quaternary ammonium reversible cross-linking and demonstrates that WPU CANs have great potential as sustainable materials.
✓ 已验证
产品关联
DOI
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2022
·
IF 5.518
Mingtai Hou,Zeyi Jiang,Fuqiang Chu,Xinru Zhang,Nien-Chu Lai
Organic phase change materials (PCMs) promise remarkable latent heat storage capacity but suffer from weak visible-light absorption capability and ultralow thermal conductivity for harvesting and conversion of clean solar energy. Herein, we design and synthesize a new core@shell structured n-eicosane@TiO 2 /TiN composite microcapsules which can realize 98.08 % of thermal energy storage capacity. By making use of the localized surface plasmon resonance of high-thermal-conductivity TiN , the prepared composite microcapsules possess a remarkable photo-thermal conversion efficiency up to 78.4 %. Plasmonics TiN can not only efficiently adsorb visible light and convert the optical energy into heat but also enhance thermal conductivity of the composite microcapsules, resulting in ultra-low supercooling degree of 1.02 o C. In addition, the composite microcapsules exhibit excellent phase change reversibility and thermal durability during the 100-cyclic scans. Our work offers new insights into designing high-performance microcapsuled PCMs in solar thermal applications, bringing great potential for renewable energy utilization beyond traditional fossil energy sources.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2022
·
IF 7.392
Jinqiang Sun,Jing Zhang,Mengge Shang,Minna Zhang,Xinfu Zhao,Sijia Liu,Xiaochan Liu,Shuo Liu,Xibin Yi
Hierarchical porous carbon shows great potential in the field of energy storage due to high porosity, large surface area, and excellent electrical conductivity. Here, we successfully fabricated carbon aerogel derived from sodium alginate/melamine composite (SAM) by directional freeze-drying combined with simple carbonization and activation process. The optimal SAM-700-4 possesses a high nitrogen (5.67 at.%) and oxygen (8.98 at.%) contents along with high specific surface area of 2577.62 m 2 /g and unique directional channel structure. Due to their synergistic effect, the SAM-700-4 electrode exhibits a high specific capacitance of 441.80 F/g at a current density of 0.5 A/g. Interestingly, the all-solid-state symmetric supercapacitor based on SAM-700-4//SAM-700-4 in PVA/SA/KOH gel electrolyte has a large energy density of 20.87 Wh/kg at a power density of 4000 W/kg and exhibits excellent cycling stability. It is believed that this N, O co-doped directional hierarchical porous carbon aerogel may show promising prospects as advanced energy storage materials.
✓ 已验证
产品关联
DOI
高影响因子
ChemPlusChem
·
2022
·Vol. 87
·期 10
·e202200312
·
IF 3.21
Yujun Wang,Rongxiu Tu,Chuantao Hou,Zonghua Wang
Graphical A porous Fe−N−C aerogel catalyst was synthesized by pyrolysis of porous metal-organic aerogels. The Fe−N−C aerogel shows enhanced catalytic performance for oxygen reduction reaction (ORR) under alkaline condition. The markedly enhanced ORR performance for Fe−N−C aerogel can be assigned to the synergistic catalytic effect between Fe−N catalytic sites and graphitized carbon and excellent mass transport due to the unique hierarchically porous architecture. Synthesis of Fe−N−C electrocatalysts by pyrolysis of porous materials has been shown to be a promising pathway for the oxygen reduction reaction (ORR). Metal-organic aerogels (MOAs) with unique micropores and mesopores should provide an excellent precursor for Fe−N−C electrocatalysts. This work reports a Fe−N−C aerogel synthesized by pyrolysis of MOA. The Fe−N−C aerogel shows excellent ORR performance in alkaline condition with an onset potential of 0.96 V (vs. RHE) and a limiting current density of 5.02 mA cm −2 . The markedly enhanced ORR performance for Fe−N−C aerogel can be assigned to the synergistic catalytic effect between Fe−N catalytic sites and graphitized carbon and excellent mass transport due to the unique hierarchically porous architecture. In addition, satisfactory durability and methanol tolerance were obtained, demonstrating a promising material for ORR.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2021
·
IF 19.503
Yongli Pei,Yanhong Quan,Xuhui Wang,Jinxian Zhao,Ruina Shi,Zhong Li,Jun Ren
N-doped hierarchical porous carbon nanosheets-supported copper catalysts (Cu/NCNS- x ) were fabricated to solve the problem of deactivation caused by the leaching, agglomeration and oxidation of Cu nanoparticles (NPs) in the dimethyl carbonate (DMC) synthesis. The optimal Cu/NCNS-12 exhibited superb activity and stability without obvious deactivation after 10 cycles. The nanosheet structure produced new defects resulting in Cu reconstruction during the reaction process, while the strong interaction between Cu 0 and N atoms greatly inhibited the oxidation of Cu 0 . The reconstruction of Cu was stimulated at above 100 °C, regardless of atmosphere, solvent types, pressure and rotation speed. The mechanism was elaborated that the initial Cu NPs (11 nm) migrated and then was trapped into newly created defects, finally formed into clusters (0.91 nm) as well as single-atom sites. This work provides profound potential in understanding metal reconstruction and developing a promising synthetic strategy of metal cluster catalysts.
✓ 已验证
产品关联
DOI
高影响因子
Nanomaterials
·
2021
·Vol. 11
·期 12
·3273
·
IF 5.076
Kunjie Wang,Jiahui Zhang,Yachen Ye,Hongbin Ma,Bingxin Liu,Peng Zhang,Benhua Xu
1T-phase molybdenum disulfide is supposed to be one of the non-precious metal-based electrocatalysts for the hydrogen evolution reaction with the highest potential. Herein, 1T-MoS2nanosheets were anchored on N-doped carbon nanotubes by a simple hydrothermal process with the assistance of urea promotion transition of the 1T phase. Based on the 1T-MoS2nanosheets anchored on the N-doped carbon nanotubes structures, 1T-MoS2nanosheets can be said to have highly exposed active sites from edges and the basal plane, and the dopant N in carbon nanotubes can promote electron transfer between N-doped carbon nanotubes and 1T-MoS2nanosheets. With the synergistic effects of this structure, the excellent 1T-MoS2/ N-doped carbon nanotubes catalyst has a small overpotential of 150 mV at 10 mA cm−2, a relatively low Tafel slope of 63 mV dec−1, and superior stability. This work proposes a new strategy to design high-performance hydrogen evolution reaction catalysts.Keywords:1T-MoS2nanosheets;N-doped carbon nanotubes;hydrogen evolution reaction;water splitting;synergy effects
✓ 已验证
产品关联
DOI
PubMed
高影响因子
RSC Advances
·
2021
·Vol. 11
·期 55
·34898-34907
·
IF 3.361
Zhenzhen Liu,Runsen Li,Yan Li,Jingpeng Zhou,Yumei Gong,Haiqiang Shi,Yanzhu Guo,Haiming Li,Zhiwei Wang,Fengshan Zhang
A convenient and sensitive reversible-fluorescence sensing platform for accurate monitoring of high-valence metal ions is still very challenging. As a green kind of fluorescent carbon nanomaterials, carbon dots (CDs) have captured considerable attention because of the stable fluorescence property and low cost. Herein, we fabricated a type of nitrogen-functionalized carbon dots (N-CDs) from CMC as a fluorescent reversible sensing platform for detecting various high-valence metal ions. N-CDs with a mean size of 2.3 nm were obtained and possessed 22.9% quantum yields (QY). A label-free fluorescent probe for detection of high-valence metal ions (Fe3+, Cr6+, Mn7+) was established via the fluorescence quenching response. Among them, the detection limit (LOD) toward Fe3+ ions reached 0.8 µM. We have explored the quenching mechanism of N-CDs to explain the valence state-related electron-transfer fluorescence quenching between high-valence metal ions and N-CDs. Moreover, the valence state-related fluorescence quenching phenomenon of N-CDs in aqueous solution could be effectively recovered by introducing a reducing agent (Ti3+). This “turn off-on” fluorescence recovery system of N-CDs could be applied in different applications covering the selective detection of environmental high-valence metal ions and cellular imaging.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF CATALYSIS
·
2021
·
IF 7.92
Huiyuan Cheng,Zihao Fan,Xuemei Wu,Manman Feng,Wentao Zheng,Guangping Lei,Xiangcun Li,Fujun Cui,Gaohong He
Single-atom catalysts (SACs) with well-defined active sites provide an efficient route for catalyzing CO 2 reduction reaction (CO 2 RR). Although enormous attention has been focused on metal-N x moieties, understanding the effect of metal-C coordination and engineering of the hybrid metal-N/C sites have rarely been reported. Herein, we fabricated Co SACs with tunable isolated Co-N 5-x C x ( x = 1, 2, 3) sites supported on porous carbon frameworks. Benefiting from the difference in electronegativity of the coordinated N and C atoms, the CO Faradaic efficiency (FE CO ) enhanced considerably from 54% to 76% and 92% at −0.8 V vs . RHE for Co-N 4 C 1 , Co-N 3 C 2 , and Co-N 2 C 3 , respectively. Further density functional theory (DFT) calculations uncover that the increased ratio of Co-C coordination induced electron enrichment of Co atoms and upper-shift the d -band center to near Fermi level, and thus favorably promotes the electron-donating ability of Co centers and strengthens the adsorption of *COOH.
✓ 已验证
产品关联
DOI
高影响因子
COMPOSITES PART B-ENGINEERING
·
2021
·
IF 9.078
Zhenming Yang,Xuehong Ren,Yu Liu
Antibacterial hydrogels are attracting extensive attention in soft tissue repair and regeneration. Herein, a novel three-dimensional (3D) printed dressing with prominent antibacterial activity and biocompatibility was fabricated based on gelatin methacryloyl (GelMA) via a photocrosslinking technique. As the main antibacterial components, CeO 2 /N-halamine hybrid nanoparticles (NPs) were added to the matrix of carboxymethylcellulose sodium (CMC)/xanthan gum. The 3D printed structure shows excellent shape fidelity and mechanical performance, which considerably enhances the swelling efficiency and blood-clotting ability of the dressings. Furthermore, the introduction of CeO 2 /N-halamine NPs endow the dressings with efficient antibacterial effect, and 99.6% Staphylococcus aureus and 99.8% Escherichia coli O157:H7 were inactivated when the contact time is up to 30 min. Notably, the fabricated dressings showed outstanding biocompatibility. In vivo experiments indicated that they efficiently accelerated wound closure by promoting the regeneration of dermis and epidermis tissues. This novel 3D printed antibacterial hydrogel might find applications as multifunctional dressings for wound treatments.
✓ 已验证
产品关联
DOI
高影响因子
Journal of Environmental Chemical Engineering
·
2021
·
IF 5.909
Jihong Xu,Peisheng Zhou,Penghui Shi,Yulin Min,Qunjie Xu
Concern about nitrogen-doped carbon materials for pollutant removal via nonradical pathway is mounting. In this study, graphite carbon nitride (g-C 3 N 4 ) was transformed into a high nitrogen-doped three-dimensional carbon material (N-CM) through the “metal template method”. The synthesized N-CM showed high efficiency in removing 2,4-dichlorophenol (2,4-DCP) via the activation of peroxymonosulfate (PMS). Under neutral condition, 2,4-DCP (0.2 g/L) was completely eliminated with 0.3 g/L PMS and 0.1 g/L N-CM900 in 30 min. Initial pH value, inorganic anions, and cycle experiments were selected to explore the availability of N-CM900/PMS. In addition, 1 O 2 dominated 2,4-DCP oxidation (about 60–70%), while the remaining 30–40% was contributed by the mediated electron transfer and N-CM-PMS*. Mechanism investigation suggested that graphitic nitrogen, the electron-rich ketonic groups and defects play a pivotal role in peroxymonosulfate activation . Combined with byproducts analysis, small-molecule acids, H 2 O and CO 2 were predominant. Overall, this study unveils a novel direction for the design of high nitrogen-doped carbon materials and improves the understanding of the coexistence of multiple mechanisms in the activation of PMS by nitrogen-doped carbon materials.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF THE ELECTROCHEMICAL SOCIETY
·
2021
·Vol. 168
·期 9
·090514
·
IF 4.316
Xiaochao Liu,Siyuan Peng,Xiaoxiao Li,Chao Liu,Jinming Zeng,Xiaopeng Qi,Tongxiang Liang
The development of low-cost, high catalytic activity oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) electrocatalysts is the key to promoting the development of zinc-air batteries. In this paper, a simple one-step pyrolysis method was used to successfully synthesize a binary FeCo–Co/NC catalyst with FeCo and Co nanoparticles encapsulated in N-doped carbon nanotubes. This structure exhibits great characteristics: it has a variety of active species (FeCo, Co, NC), and there is close combination between these active species (FeCo, Co, NC). Electrochemical studies have shown that the initial potential of FeCo–Co/NC during ORR process is 0.93 V, the half-wave potential is 0.808 V, and the limiting current density is 4.94 mA cm−2. In the OER process, at an anode current density of 10 mA cm−2, an overpotential of only 353 mV is shown; a lower Tafel slope and good durability are also observed. Moreover, the zinc-air battery in preparation can be cycled for as long as 2000 times. This provides a new method for the preparation of high-efficiency dual-function electrocatalysts for OER and ORR.
✓ 已验证
产品关联
DOI
高影响因子