FOOD CHEMISTRY
·
2024
·
IF 8.5
Kaifeng Yang,Fangming Han,Yafeng Jin,Xiaobo Li
Herein, a stable and ultra-sensitive rutin electrochemical sensor was successfully developed. This sensor based on glassy carbon electrode (GCE) modified with C-GCS@ZIF-F/PL nanocomposite, which was made of thermally carbonized glucose (GCS) doped with flower-like ZIF (ZIF-F) and pencil lead (PL). The electrochemical response of rutin was considerably significant at C-GCS@ZIF-F/PL/GCE, demonstrating favorable conductivity and electrocatalytic properties for detection of rutin. Under optimal conditions, the linear range is 0.1–100 μM, with a low detection limit (LOD) of 0.0054 μM. It also exhibits excellent stability, reproducibility, as well as selectivity over common interfering ions such as Na + , uric acid, quercetin and riboflavin, etc. Meanwhile, the practical utility of developed sensor was evaluated in food samples including honey, orange, and buckwheat tea, achieving satisfactory recovery rates ranging from 98.2% to 101.7%. This paper introduces a novel technique for the detection of rutin in foods.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF STORED PRODUCTS RESEARCH
·
2024
·
IF 2.7
Junli Xiao,Jianbo Jin,Shanyi Chen,Jianfeng Zhang,Peijian Cao,Li-Juan Mao,Ran Li
The cigarette beetle, Lasioderma serricorne (F.), presents a significant management challenge as a stored product pest. The beetle's increasing resistance to conventional fumigants necessitates the search for alternative solutions to mitigate losses in agro-based industries. Here, we constructed a small molecule compounds library containing twenty-eight methyl benzoate-related compounds (MBCs) and evaluated their repellent and toxic effects against cigarette beetles by Y-tube olfactometer behavioral assays, free-choice box assays and fumigation assays. We found that six MBCs (methyl 3-methoxybenzoate, methyl benzoate, methyl 3-formylbenzoate, methyl 2-aminopyridine-3-carboxylate, methyl 2-aminobenzoate and methyl 4-amino-2-methoxybenzoate) act as repellents for cigarette beetles. Notably, methyl benzoate (MeBA) was effective across a broader range of concentrations (200–4000 ppm) compared to other MBCs. Four compounds (methyl 3-formylbenzoate, methyl 2-aminopyridine-3-carboxylate, methyl 2-aminobenzoate and methyl 4-amino-2-methoxybenzoate) required higher minimum concentrations (500–4000 ppm) than MeBA for repellence, while methyl 3-methoxybenzoate was effective at a concentration (10 ppm) lower than that for MeBA. Mixtures of MeBA with methyl 3-methoxybenzoate and methyl 3-formylbenzoate enhanced the repellent effect against cigarette beetles when compared to MeBA alone. Additionally, exposure to varying concentrations of MeBA, methyl 3-methoxybenzoate, methyl 3-formylbenzoate, and methyl 2-aminobenzoate resulted in 100% mortality of cigarette beetles. Our findings indicate that specific MBCs offer the potential for their use as repellents and fumigants for this problematic stored product pest.
✓ 已验证
产品关联
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2024
·
IF 8.1
Binbin He,Ying Fu,Yun Zu,Yunxiang Nie,Yi Mei
Fluorine (F) is a high-value resource that has been overlooked in the production of wet-process phosphoric acid (WPA) due to its high susceptibility to complexation with metal cationic impurities, hindering F efficient recovery and subsequent phosphoric acid purification. In this paper, a co-precipitation strategy is proposed for recovering F from the WPA. Varieties of combinations between metal cation (Na + , Mg 2+ and Al 3+ ) and F - with different molar ratios in aqueous and phosphoric acid systems are designed to explore the co-precipitated regulation. Results show that the simultaneously removal efficiencies of Al 3+ , Mg 2+ and F - can be higher than 90 % in the form of NaAlMgF 6 and Na 3 AlF 6 precipitations as the n(Na + ): n(Al 3+ ): n(Mg 2+ ): n(F - ) = 5: 1.5: 1: 6 in pure systems. DFT calculations further confirm that the NaMgAlF 6 precipitation is the most stable structure identified by using XRD Rietveld refinement. Based on this fact, extra Na + and F - are added into the industrial WPA, so that the Na + , Al 3+ , Mg 2+ and F - are co-precipitated in the form of NaAlMgF 6 , and the ultimate removal efficiencies can exceed 90 % under the optimal conditions. Besides, low-cost cycling recovery of Na + and F - are also investigated. These findings are promising for the efficient utilization of F resources from phosphate rock and other ores, which is of great economic and environmental significance.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ELECTRONIC MATERIALS
·
2024
·
IF 2.2
Xu Changji,He Wenbin,Xie Zhuojia,Zou Zhengguang
In this study, La 0.63 Sr 0.2 Nd 0.17 MnO 3 was synthesized by the sol-gel method, and its structural, morphological, magnetic, and magnetocaloric effects were investigated. The structural properties were analyzed by x-ray diffraction (XRD), and scanning electron microscopy (SEM) was used to characterize the morphology. An integrated magnetic measurement system was used to determine the magnetic properties. La 0.63 Sr 0.2 Nd 0.17 MnO 3 crystallized in a hexagonal crystal system with space group R -3 c . This was also confirmed by Rietveld refinement of the x-ray data from La 0.63 Sr 0.2 Nd 0.17 MnO 3 . With the doping of Nd 3+ , the cell volume decreases, which can be explained by the angles and bond lengths of the bonds between the Mn and O ions and the distortion of the lattice. Near the Curie temperature, La 0.63 Sr 0.2 Nd 0.17 MnO 3 exhibits significant magnetocaloric effects. The magnetic study of La 0.63 Sr 0.2 Nd 0.17 MnO 3 suggests that the transition from the paramagnetic to ferromagnetic phase can occur near the Curie temperature. The maximum magnetic entropy change and relative cooling power (RCP) of La 0.63 Sr 0.2 Nd 0.17 MnO 3 (298 K, 3 T) are 2.70 J/(kg K) and 135 (J/kg), respectively. The effect of f -orbitals on the magnetic properties of La 0.8 Sr 0.2 MnO 3 was investigated by first-principles calculations in density functional theory. Thus, it can be concluded that the magnetocaloric effects of the material after doping with f -orbital ions (Nd 3+ ) is enhanced compared to La 0.8 Sr 0.2 MnO 3 .
✓ 已验证
产品关联
DOI
高影响因子
Biomolecules
·
2025
·Vol. 15
·期 7
·1052
·
IF 4.8
Guo Wei,Chuanliang Wang,Rui Wang,Peng Zhang,Xuhui Geng,Jinhua Li,Abbas Ostovan,Lingxin Chen,Zhihua Song
Aloin, a kind of active phenolic component, is sourced fromAloe vera. Recently, the determination of aloin has received enormous attention, owing to its positive performance (including anti-tumor, antibacterial, detoxification, liver protection, anti-stomach damage, and skin protection activities) and painful side effects (increased carcinogenicity caused by excessive use of aloin) impacting human health. This investigation was inspired by the good fluorescence properties of carbon dots (CDs); CD-based sensors have aroused a great deal of interest due to their excellent sensitivity and selectivity. Thus, it is of great significance to develop novel CD-based sensors for aloin determination. Herein, N,F-CDs were designed and synthesized through a convenient hydrothermal strategy; the synthesized N,F-CDs possessed good fluorescence performance and a small particle size (near 4.3 nm), which demonstrated the successful preparation of N,F-CDs. The resulting N,F-CDs possessed a large Stokes shift and could emit a highly stable green fluorescence. The fluorescence of the N,F-CDs could be effectively quenched by aloin through the inner filter effect. Furthermore, the synthesis procedure was easy to operate. Finally, the N,F-CD-coated test strips were fabricated and combined with a miniaturized fluorimeter for the fluorescence detection of aloin via the inner filter effect for the first time. The N,F-CD-coated test strips were fabricated and used for the fluorescence sensing of aloin, and the results were compared with a typical ultraviolet (UV) method. The N,F-CD-coated test strips exhibited high recovery (96.9~106.1%) and sensitivity (31.8 nM, n = 3), good selectivity, low sample consumption (1 μL), high speed (5 min), good stability, and anti-interference properties. The results indicate that N,F-CD-coated test strips are applicable for the quantitative determination of aloin in bovine serum, orange juice, and urine samples.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Water
·
2025
·Vol. 17
·期 15
·2261
·
IF 3
Xiangyu Chen,Hao Zhong,Juanjuan Yao,Jingye Gan,Haibing Cong,Tengyi Zhu
Fibrate pharmaceuticals (fibrates), as a widespread class of emerging contaminants, pose potential risks to both ecological systems and human health. The photocatalytic system based on nitrogen (N) and fluorine (F) co-doped TiO2nanotube arrays (NF-TNAs) provides a renewable solution for fibrate pharmaceutical removal from water, powered by inexhaustible sunlight. In this study, the degradation of two typical fibrates, i.e., bezafibrate (BZF) and ciprofibrate (CPF), under simulated sunlight irradiation through NF-TNAs were investigated. The photocatalytic degradation of BZF/CPF was achieved through combined radical and non-radical oxidation processes, while the generation and reaction mechanisms of associated reactive oxygen species (ROS) were examined. Electron paramagnetic resonance detection and quenching tests confirmed the existence of h+, •OH, O2•−, and1O2, with O2•−playing the predominant role. The transformation products (TPs) of BZF/CPF were identified through high-resolution mass spectrometry analysis combined with quantum chemical calculations to elucidate the degradation pathways. The influence of co-existing ions and typical natural organic matters (NOM) on BZF/CPF degradation were also tested. Eventually, the ecological risk of BZF/CPF transformation products was assessed through quantitative structure–activity relationship (QSAR) modeling, and the results showed that the proposed photocatalytic system can largely alleviate fibrate toxicity.
✓ 已验证
产品关联
DOI
高影响因子
ECOTOXICOLOGY AND ENVIRONMENTAL SAFETY
·
2025
·
IF 6.1
Huiyu Fan,Chunming Li,Yifei Lv,Tongyun Qi,Yizhou Huang,Linjuan Ma,Yibing Lan,Peiqiong Chen,Zheng Lou,Jianhong Zhou
Tetramethyl bisphenol F (TMBPF), regarded as a promising alternative to bisphenol A (BPA) across multiple industries, is now incorporated into polymer coatings for metal cans used in food and beverage packaging. Recent research has highlighted possible health risks associated with TMBPF, yet its impact on ovarian function and the mechanisms involved remain inadequately understood. This study provides a thorough evaluation of TMBPF's effects on granulosa cells (GCs) and uncovers its transgenerational influence on female reproductive health. We exposed pregnant CD1 mice to TMBPF at doses of 50 μg/kg/day or 200 μg/kg/day from gestational day 7 (GD7) through postnatal day 21 (PND21). Our findings indicated that maternal exposure to TMBPF adversely affects the reproductive system of the F1 generation by elevating the levels of E2, FSH, and LH, reducing the ovarian index, and increasing the number of collagen fibers in the ovarian stroma. The human granulosa-like tumor cell line KGN was employed as an experimental model to assess the toxic effects of TMBPF on GCs. The findings revealed that sublethal concentrations of TMBPF induced mitochondrial dysfunction, cellular senescence, and disrupted redox homeostasis in GCs in vitro. Our transcriptome sequencing analyses indicated that ESRRB upregulation might play a critical role in TMBPF-induced cellular senescence. Additionally, TMBPF exposure induced KGN cells senescence and senescent cell accumulation in F1 mouse ovaries by promoting ESRRB/p21 signalling. Collectively, our results indicate that TMBPF disrupts hormone levels in the ovaries, accelerates GCs senescence and promotes ovarian fibrosis, adversely affecting ovarian function in offspring. This study provides new insights into the potential effects of TMBPF exposure on the reproductive system and the related mechanisms.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2022
·
IF 24.319
Xiao Yu,Mengyi Shi,Yixuan Fan,Lixia Yang,Jie Zhang,Wei Liu,Weili Dai,Shuqu Zhang,Lei Zhou,Xubiao Luo,Shenglian Luo
Mn 2 O 3 is an exceptional earth-abundant mineral that has been extensively applied in catalytic oxidation because of the strong redox couples like Mn 3+ /Mn 2+ and Mn 4+ /Mn 3+ exposed on Mn 2 O 3 surface. Herein, the catalytic activity of Mn 2 O 3 in photothermal degradation of toluene was regulated by halogens including F - , Cl -, and Br - . As the electronegativity ordered in F (3.98) > O (3.44) > Cl (3.16) > Br (2.96), F - doped Mn 2 O 3 overperforms Cl - doped and Br - doped Mn 2 O 3 in decomposing toluene. DFT theoretical calculation illustrates that F - attracts the shared electrons from Mn to itself, the deviated charge center stretches the adjacent Mn-O bonds and boosts the generation of abundant oxygen vacancies, helping to strengthen the catalytic activity of Mn 2 O 3 . Conversely, Mn-O bonds are shortened by Cl - and Br - that have lower electronegativity than O. The multiple electrons circling Cl - and Br - push Mn towards O and squeeze Mn-O bonds, resulting in the formation of passivated Mn 2 O 3 . In conjunction with Mn redox couples and oxygen vacancies, 99% of 400 ppm toluene can be eliminated by F - doped Mn 2 O 3 , corresponding mineralization rate is high up to 95.8%.
✓ 已验证
DOI
高影响因子
ADVANCED MATERIALS
·
2025
·
IF 26.8
Decheng Li,Guyue Li,Yifan Yu,Chilin Li
Fluoride ion batteries (FIBs) have garnered significant attention due to their ultrahigh theoretical energy density, dendrite-free safety, and resource abundance. Although some anion acceptors have been proposed to address the insolubility of inorganic fluoride salts, the difficulty in dissociating fluoride ions from acceptors results in short lifespan and extremely low specific capacity of FIBs. Here, a fluoride ion battery is demonstrated with unprecedented long life and ultrahigh specific capacity through the design of an acceptor-multi-F state electrolyte. The high Lewis acidity of triphenylantimony chloride (TSbCl) as a novel anion acceptor in electrolyte facilitates the complete dissociation of CsF, and the resulting TSbCl-F complex can further interact with fluoride ions to form the acceptor-multi-F states. This strategy combines the high dissociation capability for fluoride salts with the minimal thermodynamic barriers for releasing fluoride ions at electrode-electrolyte interface. This electrolyte design endows FIBs with durable reversible fluorination/defluorination reaction (3700 cycles with high coulombic efficiency of 99.5% and small voltage polarization of 30 mV) and ultrahigh reversible capacity (580 mAh g −1 after 40 cycles at 100 mA g −1 ). The high-output voltage FIBs of CuF 2 //Li configuration (with discharge plateau of 2.9 V) and larger-sized pouch-type FIBs of CuF 2 //Sn+SnF 2 configuration (with reversible capacity of 530 mAh g −1 ) are demonstrated.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Coatings Technology and Research
·
2025
·
IF 2.8
Zhou Jie,Su Jingying,Su Fenghua,Zhao Tianxin,Li Ji,Yang Pengfei,Zhang Qingyu
At present, superhydrophobic coatings have a wide range of applications in self-cleaning, drag reduction, and corrosion protection. However, their poor mechanical stability has a significant impact on the service life and effectiveness of the coatings. In addressing this challenge, this study introduced epoxy resin (EP) with high strength and strong adhesion as the resin matrix. The composite coating, synthesized through a straightforward spraying technique, incorporates modified carbon nanotubes (F-CNTs) and hydrophobic fumed nanosilica (SiO 2 ) as fillers. The robust EP/F-CNTs/SiO 2 superhydrophobic coating exhibited excellent anti-rubbing ability and superadhesion strength, which was attributed to the EP intermediate layer significantly enhancing the adhesion strength between the coating and the stainless steel substrate with a remarkable adhesion grade of one. Tafel and EIS test results revealed a corrosion inhibition efficiency of up to 99.75% for the coating. The exceptional corrosion resistance of the coating is attributed to the outstanding electron transfer capability of F-CNTs. In addition, the coating could resist corrosion from strong acids and bases. It is believed that the facile and low-cost method offers an effective strategy and promising industrial applications for fabricating robust and super anti-corrosion superhydrophobic surfaces on various metallic materials.
✓ 已验证
产品关联
DOI
高影响因子
SCIENCE OF THE TOTAL ENVIRONMENT
·
2024
·
IF 8.2
Minfei Jian,Xi Chen,Shuai Liu,Yingxin Liu,Yu Liu,Qiyu Wang,Wenqing Tu
Microplastics (MPs) can adsorb and desorb organic pollutants, which may alter their biotoxicities. Although the toxicity of perfluorooctane sulfonate (PFOS) and its alternative 6:2 chlorinated polyfluorinated ether sulfonate (F-53B) to organisms has been reported, the comparative study of their combined toxic effects with MPs on aquatic organisms is limited. In this study, adult female zebrafish were exposed to 10 μg/L PFOS/F-53B and 50 μg/L MPs alone or in combination for 14 days to investigate their single and combined toxicities. The results showed that the presence of MPs reduced the concentration of freely dissolved PFOS and F-53B in the exposure solution but did not affect their bioaccumulation in the zebrafish liver and gut. The combined exposure to PFOS and MPs had the greatest impact on liver oxidative stress, immunoinflammatory, and energy metabolism disorders. 16S rRNA gene sequencing analysis revealed that the combined exposure to F-53B and MPs had the greatest impact on gut microbiota. Functional enrichment analysis predicted that the alternations in the gut microbiome could interfere with signaling pathways related to immune and energy metabolic processes. Moreover, significant correlations were observed between changes in gut microbiota and immune and energy metabolism indicators, highlighting the role of gut microbiota in host health. Together, our findings demonstrate that combined exposure to PFOS/F-53B and MPs exacerbates liver immunotoxicity and disturbances in energy metabolism in adult zebrafish compared to single exposure, potentially through dysregulation of gut microbiota.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACS Sustainable Chemistry & Engineering
·
2025
·
IF 7.3
Yu Duan,Zihan Ma,Jiaxuan He,Yingying Huang,Shuo Bao,Jinlin Lu
P2-type layered cathode materials have low energy density due to low initial Na content. In this research, high sodium content P2-type cathode material Na0.8Li0.08Ni0.23Mn0.67Cu0.1O1.92F0.08 (NMC-LF), was synthesized by a simple high-temperature solid-phase method. The strong electronegativity of F allows the local TM-O bond to be transformed into a TM-F bond, and the TMO6 octahedron becomes more stable. The doping of Li+ not only maintains structural stability but also transforms the two-phase reaction in the high-voltage range into a solid-solution reaction. This leads to an effective suppression of the irreversible P2–O2 phase transition in the high-voltage region. At 20 mA·g–1, the initial discharge capacity of NMC-LF reaches 131.05 mAh·g–1. At a high current density of 200 mA·g–1, the discharge capacity reaches 101.9 mAh·g–1 and remains at 99.31% after 150 cycles. The diffusion coefficient of NMC-LF is as high as 8.67 × 10–13 cm2·s–1. Furthermore, the structural evolution during material formation is elaborated by high-temperature XRD, and it is determined that there are no impurities at 900 °C. Under the joint synergy of Li/F/Cu and the design of high sodium content, the long-cyclic and high-rate performance has been significantly improved. In-situ XRD tests show that Li/F/Cu codoping inhibits the P2–O2 phase transition and enhances structural reversibility. This provides a new idea for the research of layered cathode materials.
✓ 已验证
产品关联
DOI
高影响因子
危险品化学品经营许可证（带存储）