CHEMICAL PAPERS
·
2022
·Vol. 77
·期 4
·2115-2124
·
IF 2.146
Lin Yamei,Zhi Hongxin,Liu Shengkai,Chen Boyu,Fu Yujie,Liu Zhiguo
Proanthocyanidins-functionalized Fe 3 O 4 @ Ag nanoparticles (Fe 3 O 4 @ AgNPs) were synthesized by one-step hydrothermal method wherein silver nanocrystals were grown in situ on the surface of Fe 3 O 4 nanoparticles with the assistance of proanthocyanidins. The morphology and structure of Fe 3 O 4 @ AgNPs were characterized by scanning electron microscope (SEM), transmission electron microscope (TEM), Fourier-transform infrared spectrometer (FTIR), UV–Vis spectrophotometer (UV–Vis), X-ray powder diffractometer (XRD), and physical property measurement system (PPMS). The characterization results indicated that sliver nanocrystals were deposited on the surface of Fe 3 O 4 nanoparticles to form spherical and uniformly dispersed Fe 3 O 4 @ AgNPs. Moreover, the Fe 3 O 4 @ AgNPs had a high magnetic response, which can be recovered from the environment. The antibacterial activity of the Fe 3 O 4 @ AgNPs against Escherichia coli ( E. coli ), Staphylococcus aureus ( S. aureus ), and Candida albicans ( C. albicans ) was investigated. The results confirmed that the Fe 3 O 4 @ AgNPs had broad-spectrum antibacterial activity. At the same time, the adsorption property of the nanoparticles for heavy metal ions Cu 2+ , Pb 2+ , and Cd 2+ was also studied. The results showed that pH and incubation time played an essential role in the removal of heavy metal ions, and the nanoparticles had excellent removal efficiency. The multifunctional nanomaterial Fe 3 O 4 @ AgNPs prepared by this study have the potential to apply in the biomedical and water disinfection fields.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF POROUS MATERIALS
·
2022
·Vol. 30
·期 3
·989-997
·
IF 2.523
Sun Weihao,Fang Yinchun,Wu Lingshuang,Liu Xinhua
Cellulose aerogel as the third generation of aerogel materials has become a hotspot. However, the poor mechanical property and dimensional stability of cellulose aerogel restrict its application. In this study, the micron down feather fibers (DFF) was used as the reinforcing material to prepare the cellulose composite aerogels by dispersion DFF in the carboxymethyl cellulose (CMC) matrix. The prepared CMC/DFF composite aerogel with low density (0.0389–0.0428 g/cm 3 ) and high porosity (about 97%). The effects of down fiber mass fraction on the mechanical and insulation properties of cellulose composite aerogel were studied. The addition of down feather fibers in the CMC aerogels could improve the mechanical property by increasing the compressive stresses at the 80% compressive strain about 75%. The CMC/DFF composite aerogels also could obtain excellent acoustic and thermal insulation properties with the sound absorption coefficient of 0.991 and thermal conductive of 0.06012 W/mK. The reinforcing mechanism of down fiber on cellulose aerogel was studied. The improvement of mechanical property of CMC aerogels by down feather fibers was due to the physical reinforcement by broadening the layers space of composite aerogels and the chemical reinforcement by forming the cross-linking system with CMC matrix and DFF through glutaraldehyde. Therefore, this research provides a novel strategy for preparation of cellulose composite aerogels with excellent acoustic and thermal insulation, and reinforced mechanical property by using the waste bio-based micron down feather fibers.
✓ 已验证
产品关联
DOI
高影响因子
Nano Research
·
2022
·Vol. 16
·期 4
·4758-4766
·
IF 10.269
Xu Lili,Chen Jinxing,Ma Qian,Chao Daiyong,Zhu Xinyang,Liu Ling,Wang Jin,Fang Youxing,Dong Shaojun
Polymer stabilizers are widely used to synthesize gold nanoparticles (Au NPs) to prevent their aggregation and improve their stability. Although stabilizers are known to greatly influence both the structure and size of Au NPs, limited efforts explore their effects on the activity of Au NPs for biocatalysis. Herein, different polymers are used as stabilizers to synthesize Au NPs. For the glucose oxidase-like activity, we find that without the spatial barrier from stabilizers, naked Au NPs show significantly high catalytic activity as well as the worst stability. Among the polymers, polyacrylic acid-stabilized Au NPs exhibit the highest activity, whose V max (0.74 µM·s −1 ) is higher than that of the natural glucose oxidase (0.37 µM·s −1 ) due to the smallest particle size (< 2 nm) and the weak spatial resistance of polyacrylic acid. These variable catalytic results derive from the comprehensive effects including size, steric hindrance, and electronic effect. However, further selectivity and activity tests have exposed shortcomings. They possess universal activities for aldose oxidation, whereas cannot retain activities in typical physiological environments. Our findings highlight the role of polymer stabilizers in imposing effects on the glucose oxidase-like activity of Au NPs and provide a basis for further Au NPs engineering and applications.
✓ 已验证
产品关联
DOI
高影响因子
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH
·
2022
·Vol. 30
·期 11
·29190-29205
·
IF 5.19
Qin Wenli,Chen Zefei,Liu Xueya,Zhang Xinyi,Ai Manqing,Zhang Pingping,Ye Ying,Ma Zengling
Bismuth phosphate (BiPO 4 ), a very attractive candidate for organics electrodegradation, harbors tremendous potential on removing contaminants from water. Here, four carbon microtube electrodes were prepared from corncob, each coated with BiPO 4 by a different method to study the electrodegradation of methylene blue (MB). A thorough insight into the composite features of four electrodes was characterized. Better reversibility and electrocatalytic activity of the fourth electrode (BCC4) prepared by digital signal generator was presented with a current density of 5.71 mA cm −2 at a potential of 1.6 V vs Ag/AgCl. The electrochemical impedances and actual lifetime of BCC4 were 125 Ω and 833 h, respectively. The effectiveness of each kind of BiPO 4 /carbon electrode was preliminarily evaluated by analyzing the actual conversion rate of the MB concentration, which confirms MB electrodegradation by the BiPO 4 /carbon electrode was mainly dominated by the hydroxyl radical oxidation. The mass transfer rate was increased by carbon microtube; thereby, electrocatalysis of BiPO 4 /carbon electrode increased as revealed by an increase in the MB degradation rate. The rate constants k obtained for the degradation of MB by BiPO 4 /carbon electrode at 20 ℃ was 0.0046 mM −1 s −1 , which was 11 times than that of BiPO 4 . The diffusion layer was decreased by carbon microtube, resulting in MB electrodegradation rate increased. The BiPO 4 coated on the surface of the carbon microtube electrodes strengthened their electrocatalytic performance, which shed new light on effective selection of suitable carbon electrode for degradation of organics. Therefore, BiPO 4 /carbon electrode could be potentially applied in the electrodegradation of organic pollutants. Graphical Abstract
✓ 已验证
产品关联
DOI
PubMed
高影响因子
RESEARCH ON CHEMICAL INTERMEDIATES
·
2022
·Vol. 48
·期 11
·4517-4536
·
IF 3.134
Yang Zizhen,Wang Siya,Chen Ou,Wang Zhengwei,Xu Jundong,Zheng Shuqin
In this paper, FeMn-ZSM-5/MOR(FeMn-Z/M) catalyst was synthesized through in-situ crystallization and wet impregnation method and used as heterogeneous Fenton-like catalyst for degradation of indigo carmine (IC) in aqueous solution. The catalysts were characterized using XRD, BET, SEM, EDS, FT-IR and XPS techniques. The experimental results showed that Fe and Mn were successfully doped onto the ZSM-5/MOR(Z/M) surface. The combination of ZSM-5 and mordenite (MOR) not only enhanced the adsorption capacity of contaminant, but also had more active sites. Degradation experiments and the valence variations indicated that Fe and Mn had a significant synergistic effect. The results of IC degradation experiments under different conditions showed that the optimum conditions (FeMn mass ratio = 1:2, FeMn-Z/M = 25 mg, H 2 O 2 = 0.5 ml, pH = 3), the degradation rate of IC reaches 99% in 20 min. Reaction analyses showed that catalyst follow a first-order reaction kinetic. The degradation of IC could be divided into two stages: adsorption/oxidation (After adsorption, oxidative degradation begins) and Fenton-like reaction. Free radicals quenching studies analyzed verified that the dominant free radicals within FeMn-Z/M Fenton-like system were hydroxyl radical (·HO) and hydro-peroxy radical (·HO 2 ), ·HO 2 was the main free radical in the adsorption/oxidation stage. The possible catalytic mechanism was proposed. Finally, the synthesized FeMn-Z/M catalyst had better performance than other IC removal methods, and had good degradation efficiency and high reusability after multiple runs.
✓ 已验证
产品关联
DOI
高影响因子
ENVIRONMENTAL SCIENCE AND POLLUTION RESEARCH
·
2022
·Vol. 30
·期 7
·19393-19409
·
IF 5.19
Lu Qiyuan,Zhang Weimin,Xiong Xia,Guo Yadan,Huang Dandan,Liu Haiyan
Hydroxyapatite-coated quartz sands were synthesized by the sol–gel method and employed as a permeable reactive barrier (PRB) medium for the manganese contaminated aqueous solution treatment. The effects of composite particle size, initial concentration of manganese, and hydraulic load on the manganese removal in aqueous solution were investigated by column test. The Thomas and Yoon-Nelson dynamic models were used to reproduce the Mn(II) adsorption behavior observed in these column experiments. The scanning electron microscope (SEM) coupled with energy dispersive spectrometer (EDS), X-ray diffractometer (XRD), and X-ray photoelectron spectroscopy (XPS) were employed to investigate the Mn(II) removal mechanism. Results showed that the initial concentration of manganese had the greatest influence on Mn(II) removal when the initial concentration of manganese is 3 mg/L, the particle size is 0.15 ~ 0.3 mm, the hydraulic load is 5.5 m 3 /m 2 ·d, and the adsorption capacity of the composites reached the maximum of 1.10 mg/g. The Thomas model fitted the breakthrough curves better. The maximum adsorption capacity of Mn(II) is 0.7546 mg/g. The adsorption mechanisms are mainly ion exchange and dissolution–precipitation. The results indicate that the hydroxyapatite-coated quartz sands could be an effective PRB media for the manganese-contaminated water treatment.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF POLYMER RESEARCH
·
2022
·Vol. 29
·期 11
·1-11
·
IF 3.061
Li Mingyue,Chen Yidong,Xu Qingwen,Chen Yilin,Ren Xiancheng,Zhou Kai
Underground power cables are prone to electrical tree aging and additives loss due to the harsh working environment. In this work, the thermal aged cross-linked polyethylene (XLPE) cables were restored by injecting a newly synthesized voltage stabilizer containing hydrolyzable siloxane groups. The voltage stabilizer functionalized siloxane groups greatly enhanced the electrical tree initiation voltage, significantly reduced the direct current (DC) conductivity and dielectric loss factor. The results of scanning electron microscope (SEM) and energy dispersive spectroscopy (EDS) indicated that the voltage stabilizer molecules were distributed in the electrical tree channels of the restored cables. After secondary thermal aging at 150 °C for 360 h, the characteristic electrical tree initiation voltage of the restored cable reached 12.10 kV, which was 66.90% higher than that of the unrestored cable. This indicated that the migration of voltage stabilizers could be inhibited by introducing hydrolyzable groups. This investigation provided a new approach to improve the migration resistance of the voltage stabilizer and the inhibitory effect of the rejuvenation liquid on the electrical tree.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF MATERIALS SCIENCE
·
2022
·Vol. 58
·期 2
·880-889
·
IF 4.682
Min Huihua,Fan Deqi,Zhang Hao,Xu Xueling,Yang Xiaofei,Lu Yi
Harvesting solar energy to convert thermal energy is a promising technology that enables substantial eco-friendly applications to alleviate freshwater and energy crisis. To realize rapid and energy-efficient solar driven steam evaporation, developing efficient photothermal conversion materials are significantly important. Here is a facile approach for constructing a three-dimensional (3D) pillar hydrogel based on FeCoNiCrO x (FCNCO) for effective water treatment. Taking advantage of high solar absorption property and low evaporation enthalpy, the CPH-2S can be capable of achieving surface plasmon resonance assisted water evaporation rates of 2.44 kg m −2 h −1 under 1 sun irradiation. This function endows the evaporator with a light-to-vapor conversion efficiency of 96%, which is induced by an elaborately constructed hydrogel with surface photons trapping and thermal localization capabilities. Meanwhile, the hydrogel exhibits salt resistance in seawater as well as the stability of solar evaporation performance. This work offers a rational design principle to create multi-metal component-based photothermal materials for developing a self-sustainable and solar-powered water-energy platform.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF NANOBIOTECHNOLOGY
·
2022
·Vol. 20
·期 1
·1-13
·
IF 9.429
Wang Yongtao,Wang Nana,Yang Yingjun,Chen Yazhou,Zhang Zhengguo
Gene transfection was supposed to be the most promising technology to overcome the vast majority of diseases and it has been popularly reported in clinical applications of gene therapy. In spite of the rapid development of novel transfection materials and methods, the influence of morphology-dependent nanomechanics of malignant osteosarcoma on gene transfection is still unsettled. In this study, cell spreading and adhesion area was adjusted by the prepared micropatterns to regulate focal adhesion (FA) formation and cytoskeletal organization in osteosarcoma cells. The micropattern-dependent FA and cytoskeleton could induce different cellular nanomechanics to affect cell functions. Our results indicated that transfection efficiency was improved with enlarging FA area and cell nanomechanics in micropatterned osteosarcoma. The difference of gene transfection in micropatterned cells was vigorously supported by cellular internalization capacity, Ki67 proliferation ability and YAP mechanotranduction through the regulation of focal adhesion and cytoskeletal mechanics. This study is an attempt to disclose the relationship of cell nanomechanics and gene transfection for efficient gene delivery and develop multifunctional nanomedicine biomaterials for accurate gene therapy in osteosarcoma cells.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
MICROCHIMICA ACTA
·
2022
·Vol. 189
·期 12
·1-10
·
IF 6.408
Sun Zhuo,Lu Juan,Zhang Xin,Shan Xiangyu,Wu Qian,Li Chao,Li Huiling,Yang Shuning,Tian Li
Electrospun nanofibers containing CdTe@ZnNi-metal–organic frameworks (CdTe@ZnNi-MOF NFs) were used for the first time in luminol-O 2 electrochemiluminescence (ECL) system to construct ECL sensor for chlorpyrifos (CPF) detection. Firstly, CdTe@ZnNi-MOF NFs obtained by blending method was used to modify the surface of a glassy carbon electrode, and then, the proposed solid-state ECL sensor was constructed by dropping luminol onto the surface of nanofiber benefiting from chitosan (CTS) viscosity. CdTe@ZnNi-MOF NFs with its large surface area and porosity can be used not only as luminol carrier but also as co-reaction promoter of the ECL system. The ECL sensor obtained satisfactory results in weakly alkaline solution under the synergistic action of CdTe@ZnNi-MOF NFs and luminol. The constructed ECL sensor can effectively detect CPF in the range 1.0 × 10 −14 –1.0 × 10 −9 M, and the detection limit was 6.23 × 10 −17 M (3 σ / m ). The constructed sensor was simple and sensitive, and can be used for the determination of CPF in vegetable samples. It not only broadened the application of MOFs in the field of ECL but also provided a new idea for expanding the application of the luminol-O 2 system. Graphical Abstract
✓ 已验证
产品关联
DOI
PubMed
高影响因子
JOURNAL OF FLUORESCENCE
·
2022
·Vol. 33
·期 1
·327-337
·
IF 2.525
Ren Yangyang,Han Shuhua
Seminaphthorhodafluor (SNARF) Schiff base (SNARF-SB) bridged periodic mesoporous organosilicas (SSPMOs) with “turn-on” fluorescence enhancement for sensing Cu 2+ were synthesized via a template-directed co-condensation method. Small-angle x-ray scattering (SAXS) patterns, high resolution transmission electron microscope (HRTEM) images, and N 2 adsorption–desorption isotherms indicated the presence of mesoporous structure in the SSPMOs. FT-IR spectra and 29 Si MAS NMR data confirmed the successful incorporation of bridged organic groups in the framework of SSPMOs. The luminous properties that SSPMOs had a selective response to Cu 2+ were investigated by UV–Vis absorption spectroscopy and fluorescence spectroscopy. The limit of detection (LOD) was 5.1 × 10 –7 M and binding stoichiometry was determined 1:1 between SNARF-SB and Cu 2+ . The fluorescence enhancement of SSPMOs towards Cu 2+ was induced by ring-opening of the spirolactam in SNARF-SB in framework of SSPMOs, which was confirmed by FT-IR spectra of SNARF-SB with Cu 2+ . Moreover, SSPMOs have improved fluorescence lifetimes compared with that of SNARF-SB. Therefore, SSPMOs can be a progressive chemical sensor for Cu 2+ due to its high selectivity, recyclability, and stability.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
MICROCHIMICA ACTA
·
2022
·Vol. 189
·期 2
·1-10
·
IF 6.408
Huang Hui,Xie Shuqian,Deng Lu,Yuan Jie,Yue Ruirui,Xu Jingkun
A nanocomposite of rGO/MXene-Pd/rGO with hierarchical structure based on Ti 3 C 2 T x MXene, Pd nanoparticles, and reduced graphene oxide (rGO) was synthesized by a green approach. Ti 3 C 2 T x MXene decorated with Pd nanoparticles (MXene-Pd) was prepared first. Then, graphene oxide (GO), MXene-Pd, and GO were coated on the surface of the glassy carbon electrode (GCE) in sequence. After each coating of the GO layer, the GO nanosheets were reduced to rGO electrochemically. The fabricated rGO/MXene-Pd/rGO hierarchical framework performs a pie structure with MXene-Pd as the stuffing and rGO nanosheets as the crust, which will be beneficial to the enhancement of its electrochemical sensing performance. As compared with other electrodes, the rGO/MXene-Pd/rGO/GCE exhibited higher electrocatalytic activity and better sensing performance for luteolin detection, with a wide linear range of 6.0 × 10 −10 to 8 × 10 −7 M and 1.0 × 10 −6 to 1.0 × 10 −5 M (oxidation peak potential E pa = 0.34 V vs . SCE), a low detection limit of 2.0 × 10 −10 M, and a high sensitivity of 112.72 µA µM −1 cm −2 . Moreover, the fabricated sensor also showed high selectivity, reproducibility, and repeatability toward the detection of luteolin. The real sample analysis for luteolin in honeysuckle was successfully carried out by rGO/MXene-Pd/rGO and verified with high-performance liquid chromatography (HPLC) analysis techniques with acceptable results. All the above tests indicate the promising application prospect of the rGO/MXene-Pd/rGO framework for luteolin detection in honeysuckle and other herbs containing luteolin. Graphical abstract
✓ 已验证
产品关联
DOI
PubMed
高影响因子