文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第3481至3492个,产品总数6,840个

切换升序
Co2
SCIENCE OF THE TOTAL ENVIRONMENT · 2020 · IF 6.551

Photo-augmented PHB production from CO2 or fructose by Cupriavidus necator and shape-optimized CdS nanorods

Mengying Xu,Pier-Luc Tremblay,Ran Ding,Jianxun Xiao,Junting Wang,Yu Kang,Tian Zhang

Particulate photocatalysts developed for the solar energy-driven reduction of the greenhouse gas CO 2 have a small product range and low specificity. Hybrid photosynthesis expands the number of products with photocatalysts harvesting sunlight and transferring charges to microbes harboring versatile metabolisms for bioproduction. Besides CO 2 , abiotic photocatalysts have been employed to increase microbial production yields of reduced compounds from organic carbon substrates. Most single-reactor hybrid photosynthesis systems comprise CdS assembled in situ by microbial activity. This approach limits optimization of the morphology, crystal structure, and crystallinity of CdS for higher performance, which is usually done via synthesis methods incompatible with life. Here, shape and activity optimized CdS nanorods were hydrothermally produced and subsequently applied to Cupriavidus necator for the heterotrophic and autotrophic production of the bioplastic polyhydroxybutyrate (PHB). C. necator with CdS NR under light produced 1.5 times more PHB when compared to the same bacterium with suboptimal commercially-available CdS. Illuminated C. necator with CdS NR synthesized 1.41 g PHB from fructose over 120 h and 28 mg PHB from CO 2 over 48 h. Interestingly, the beneficial effect of CdS NR was specific to C. necator as the metabolism of other microbes often employed for bioproduction including yeast and bacteria was negatively impacted. These results demonstrate that hybrid photosynthesis is more productive when the photocatalyst characteristics are optimized via a separated synthesis process prior to being coupled with microbes. Furthermore, bioproduction improvement by CdS-based photocatalyst requires specific microbial species highlighting the importance of screening efforts for the development of performant hybrid photosynthesis.

CAS / MDL: 1306-23-6
✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
SEPARATION AND PURIFICATION TECHNOLOGY · 2020 · IF 5.774

Introducing two-dimensional metal-organic frameworks with axial coordination anion into Pebax for CO2/CH4 separation

Minmin Gou,Weifang Zhu,Yanyong Sun,Ruili Guo

Two-dimensional (2D) MOF named Cu(BPY) 2 (OTF) 2 (OTF = trifluoromethanesulfonic acid anion (CF 3 SO 3 − ), BPY = 4,4-bipyridine) possessing axial coordination anion was prepared, and then combined into Pebax® MH 1657 (Pebax) polymer to fabricate mixed matrix membranes (MMMs) for the separation of CO 2 /CH 4 gas mixtures. The inherent microporous structure and interlayer nanochannel that constructed by axial coordination anion CF 3 SO 3 − of Cu(BPY) 2 (OTF) 2 nanosheets provide selective transfer channels for CO 2 . In addition, the group that has an affinity for CO 2 , such as pyridine group and CF 3 SO 3 − anion, locating in the surface and the interlayer of Cu(BPY) 2 (OTF) 2 nanosheets, present better binding affinity and molecule selectivity for CO 2 . Owing to the synergistic effect between structure and functional groups of Cu(BPY) 2 (OTF) 2 nanosheets, the optimized CO 2 separation performance (permeability and selectivity) of the MMMs compared with that of pure Pebax were increased by 86.65% and 47.59%, respectively, under the conditions of pure gas, 0.1 MPa and 25 °C. The open narrow nanochannels and axial coordination anion in Cu(BPY) 2 (OTF) 2 nanosheet, making Cu(BPY) 2 (OTF) 2 a promising material to prepare efficient mixed matrix membrane.

CAS / MDL: 553-26-4 34946-82-2
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF MEMBRANE SCIENCE · 2020 · IF 7.183

Mixed matrix membranes for CO2 separations by incorporating microporous polymer framework fillers with amine-rich nanochannels

Ye Yuan,Zhihua Qiao,Jiayou Xu,Jixiao Wang,Song Zhao,Xingzhong Cao,Zhi Wang,Michael D. Guiver

Membrane-based separation processes can improve separation efficiency and reduce the environmental hazards and energy costs of traditional separation processes. Mixed matrix membranes (MMMs) with broad development prospects are frequently restricted by interfacial incompatibility and the blockage of gas transport channels in the filler matrix. Here, we report a new type of high-valence metal-induced microporous polymer (HMMP-1) filler, with a high density of free amine groups, and having excellent alkaline stability. The HMMP-1 nanoparticles were incorporated into polyvinylamine (PVAm) to prepare facilitated transport mixed matrix membranes (MMMs). The resulting HMMP-1 based MMMs maintain their pore aperture structure, which is mainly due to the excellent compatibility between the polymer component in the HMMP-1 and PVAm. Amine-rich nanochannels with appropriate pore size allow rapid CO 2 transport through the filler pores by preferential adsorption monomolecular surface diffusion , leading to high CO 2 permeance and excellent separation performance for CO 2 /CH 4 , CO 2 /N 2 and CO 2 /H 2 compared with many other reported membranes. A techno-economic evaluation suggests that the MMM is feasible for carbon capture from post-combustion flue gas .

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Catalysis Science & Technology · 2020 ·Vol. 10 ·期 23 ·8026-8033 · IF 5.721

Integration of metalloporphyrin into cationic covalent triazine frameworks for the synergistically enhanced chemical fixation of CO2

Qiu-Jin Wu,Min-Jie Mao,Jian-Xin Chen,Yuan-Biao Huang,Rong Cao

The design and preparation of porous catalysts with multiple catalytically active sites for synergistically catalytic conversion of CO2 still remains a challenge. Herein, cobalt porphyrin as a Lewis acidic active site was introduced in imidazolium-functionalized cationic covalent triazine frameworks (denoted as Co-PCCTFs) via copolymerization of cobalt 5,10,15,20-tetrakis(4-cyanophenyl)porphyrin (Co-TPPCN) and 1,3-bis(4-cyanophenyl) imidazolium chloride ([BCIM]Cl). The obtained bifunctional Co-PCCTFs with positively charged imidazolium groups have high BET surface areas and show sufficient CO2 adsorption uptakes. The nucleophilic halide anions of the imidazolium parts and the cobalt porphyrin Lewis acid sites were positioned in close proximity so that the Co-PCCTFs could synergistically activate substrates and intermediates. Compared with ICTF-400 free of Co2+ that was obtained from [BCIM]Cl, Co-PCCTF5 exhibited enhanced activity for the cycloaddition of CO2 to epoxides to produce cyclic carbonates without a cocatalyst under mild conditions. Moreover, Co-PCCTF5 is sufficiently stable so that it could be reused more than 5 times without loss of catalytic activity. This work provides a new approach for the design and preparation of efficient multifunctional catalysts with multiple sites for synergistic catalysis.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Green Energy & Environment · 2020 · IF 6.395

Efficient fixation of CO2 into propylene carbonate with [BMIM]Br in a continuous-flow microreaction system

Yuxin Wu,Yuncheng Ding,Jianhong Xu,Yundong Wang,Kathryn Mumford,Geoffrey W. Stevens,Weiyang Fei

Utilization of carbon dioxide (CO 2 ) is of great significance in the development of CO 2 absorption and the solution of greenhouse gas effect. Highly efficient conversion of CO 2 into cyclic carbonate with green catalysts is essential for the more sustainable expansion of CO 2 fixation. Traditional batch reactor is limited by low efficiency, high cost and low security. Meanwhile, continuous flow system showcased a myriad of virtues, including shortening the residence time from hours to seconds, and decreasing reaction temperature, and possessing the nature of easy industrial scale-up. In this paper, a continuous-flow microreaction system was developed to synthesis propylene carbonate (PC) from propylene oxide (PO) and CO 2 using 1-butyl-3-methylimidazolium bromide ([BMIM]Br) as catalyst. By observing the flow patterns inside microreaction system, the effects of reaction temperature, molar fraction of catalyst, operating pressure, residence time, molar ratio of CO 2 /PO as well as recycling performance of catalyst on the overall performances were comprehensively evaluated into details. Under different reaction conditions, the flow patterns were set to vary between slug flow and annular flow. The results showed that the yield of propylene carbonate (PC) can reach 99.7% at 140 °C and 3.0 MPa with the residence time of 166 s, while the recycling performance of the designed system greatly conforms the future trend of green chemistry.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Nature Communications · 2020 ·Vol. 11 ·期 1 ·1-11 · IF 12.121

Direct and indirect Z-scheme heterostructure-coupled photosystem enabling cooperation of CO2 reduction and H2O oxidation

Wang Ying,Shang Xiaotong,Shen Jinni,Zhang Zizhong,Wang Debao,Lin Jinjin,Wu Jeffrey C. S.,Fu Xianzhi,Wang Xuxu,Li Can

The stoichiometric photocatalytic reaction of CO 2 with H 2 O is one of the great challenges in photocatalysis. Here, we construct a Cu 2 O-Pt/SiC/IrO x composite by a controlled photodeposition and then an artificial photosynthetic system with Nafion membrane as diaphragm separating reduction and oxidation half-reactions. The artificial system exhibits excellent photocatalytic performance for CO 2 reduction to HCOOH and H 2 O oxidation to O 2 under visible light irradiation. The yields of HCOOH and O 2 meet almost stoichiometric ratio and are as high as 896.7 and 440.7 μmol g −1  h −1 , respectively. The high efficiencies of CO 2 reduction and H 2 O oxidation in the artificial system are attributed to both the direct Z-scheme electronic structure of Cu 2 O-Pt/SiC/IrO x and the indirect Z-scheme spatially separated reduction and oxidation units, which greatly prolong lifetime of photogenerated electrons and holes and prevent the backward reaction of products. This work provides an effective and feasible strategy to increase the efficiency of artificial photosynthesis.

✓ 已验证 产品关联 DOI PubMed 高影响因子
查看原文 查看 PubMed
SEPARATION AND PURIFICATION TECHNOLOGY · 2020 · IF 5.774

Metal-organic framework MOF-801/PIM-1 mixed-matrix membranes for enhanced CO2/N2 separation performance

Wenbo Chen,Zhenguo Zhang,Lei Hou,Cancan Yang,Hongcheng Shen,Kai Yang,Zhe Wang

This work mainly studies the CO 2 separation performance of a new type mixed-matrix membranes (MMMs) based on MOF-801 as the microporous filler and PIM-1 as the polymer matrix. MMMs was successfully formed via simple casting/solvent evaporation approach at room temperature. The samples were systematically characterized by SEM, XRD, TGA and FTIR, the permeability-selectivity of MMMs to CO 2 , O 2 and N 2 was studied by gas permeability test. The experimental results show that the uniform dispersion of the CO 2 -philic MOF-801 filler provides a channel for the rapid and selective transport of CO 2 , so the MOF-801/PIM-1 MMMs revealed much higher CO 2 permeability and CO 2 /N 2 ideal selectivity (CO 2  = 9686 Barrer, CO 2 /N 2  = 27, all selectivity in the paper is ideal) than pure polymer membrane. After 90-days aging test, the CO 2 permeability of MMMs remains above 70%, which reflects its good anti-aging performance. After 120 h continuous gas permeability test, it also shows good long-term working stability. The experimental results show that the good gas separation performance of MMMs   exceeds the Robeson upper bound (2008), showing good application prospect for practical greenhouse gas CO 2 separation.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
CARBON · 2020 · IF 8.821

Facile and controllable synthesis of ordered mesoporous carbons with tunable single-crystal morphology for CO2 capture

Zhongzheng Zhang,Nannan Sun,Wei Wei

A facile strategy for efficient synthesis of ordered mesoporous carbons (OMCs) with regular single-crystal morphology was designed, and based on this detailed effect of early dissolving temperature, hydrothermal temperature and time, and carbonization temperature on textural properties and structures of obtained single-crystal OMCs were further systematically investigated. Compared with other methods, this strategy was a simple single-step process without complicated pre-polymerization procedure, and didn’t require extremely long reaction time for the formation of single-crystal morphology. What’s more important, single-crystal morphology of OMCs, such as spherical, rhombic dodecahedral, hexagonal prismatic and cubic morphology, can be easily generated and tuned by just simply controlling the dissolving temperature, indicating an important and decisive role of dissolving temperature in determining the morphology types. In addition to the well-developed single-crystal morphology, the obtained OMCs also exhibited high surface areas, uniform pore sizes, and appreciable nitrogen contents, which make them exhibit considerable CO 2 capacities, high CO 2 /N 2 selectivity, excellent cycling stability, and a much higher specific capacity of CO 2 than some nanostructured N-doped carbons with high nitrogen content. Besides, a possible growth mechanism was also proposed based on the direct observations from the SEM images of some synthesized single-crystal OMCs.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
APPLIED SURFACE SCIENCE · 2020 · IF 6.182

Photocatalytic CO2 reduction catalyzed by metalloporphyrin: Understanding of cobalt and nickel sites in activity and adsorption

Jie Xu,Xiaowei Liu,Zijian Zhou,Minghou Xu

Porphyrin based MOFs have exhibited excellent photocatalytic properties in photocatalytic CO 2 reduction and metal sites in porphyrin units play an important role in the reactions. For investigating the mechanism of different photocatalytic performance of metals sites in porphyrin units, metalloporphyrin complexes with Co and Ni metal sites (Co-POR, Ni-POR) were prepared by a short term method and used for visible-light drived CO 2 photoreduction conversion with water vapor as sacrificial agent. PL spectra indicates that the fluorescence intensity of Co-POR was obviously lower than that of Ni-POR and DFT calculation indicates that CO 2 adsorption energy on Co-POR (17.92 kJmol −1 ) is higher than that on Ni-POR (16.37 kJmol −1 ). The efficient separation of charge carries and the strong CO 2 adsorption ability are main advantages of Co-POR compared with Ni-POR. As a direct result, the experimental results showed that 0.40 μ m o l g - 1 h - 1 CO was produced over Co-POR after 4 h reaction, which is about equivalent to a 1.7-fold enhancement compared to Ni-POR under the same reaction condition.

CAS / MDL: 14609-54-2
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Journal of CO2 Utilization · 2020 · IF 5.993

One-pot synthesis of efficient carbonic anhydrase-zeolitic imidazolate framework-8 composite for enhancing CO2 absorption

Mine Du,Han Chen,Jiexu Ye,Shihan Zhang,Jianmeng Chen,Lidong Wang

Carbonic anhydrase (CA) enzyme-based absorption process is under development for CO 2 capture. How to maintain the activity and stability of CA enzyme is the important issue related to this emerging process. The immobilization technologies are regarding as the promising method to stabilize CA in harsh environments. This work encapsulated CA into zeolitic imidazolate framework-8 (ZIF-8) with different particle sizes according to several preparation protocols and investigated their activity and stability. The experimental results revealed that the preliminary crystallization time, enzyme dosing amount, and particle sizes of ZIF-8 had a significant influence on the catalytic performance of immobilized CA. The remaining activity of the CA after immobilization ranged from 52 to 93 % depending on the employed preparation protocol. In addition, the immobilized CA with particle size of ∼400 nm exhibited better activity compared to those with particle sizes of ∼100 nm and 1000 nm. Moreover, with the increase of the preliminary crystallization time, the stability of immobilized CA descended.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
Journal of CO2 Utilization · 2020 · IF 5.993

A Cu-based MOF for the effective carboxylation of terminal alkynes with CO2 under mild conditions

Guangyong Shi,Wei Xu,Jichao Wang,Ye Yuan,Somboon Chaemchuen,Francis Verpoort

The coordination of pyridylcarboxylate (isonicotinic acid, IN) with copper (II) fabricates a Cu(IN)-MOF. The characteristic properties of the Cu(IN)-MOF are obtained via different analysis techniques such as XRD, SEM, BET, ICP, TG, etc. The advantage of copper(II) coordinated with a bi-functional organic linker (IN), containing a pyridyl and carboxylate group, is demonstrated by the chemical properties of which the Cu(II)-based MOF exhibits excellent catalytic performance for the CO 2 carboxylation of terminal alkynes. No noble-metal, co-catalyst, or additives are required to execute the reaction. The effectiveness of the Cu(IN)-MOF was demonstrated with a variety of substrates (>11). Moreover, the Cu(IN)-MOF, as a heterogeneous catalyst, can be recycled at least 5 times retaining its excellent catalytic performance. Herein, we report the first copper (II) metal-organic framework (Cu(IN)-MOF) applied for the carboxylation of alkynes with CO 2 demonstrating several advantages such as stable catalyst, avoiding the use of an expensive noble-metal, straightforward synthesis.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
APPLIED CATALYSIS B-ENVIRONMENTAL · 2020 · IF 16.683

Unraveling the selectivity puzzle of H2 evolution over CO2 photoreduction using ZnS nanocatalysts with phase junction

Pan Li,Gan Luo,Shuang Zhu,Lingju Guo,Peng Qu,Tao He

Catalytic reduction of CO 2 is usually accompanied by competitive H 2 evolution. However, the selectivity between CO 2 reduction and H 2 evolution is not completely understood hitherto. Here ZnS is chosen as the model catalyst to study this and are prepared by hydrothermal treatment of ZnS(en) 0.5 precursor. ZnS nanoparticles exhibit high production yield of solar fuels due to the formation of internal Sphalerite-Wurtzite phase junction within a single particle. The predominant product of H 2 can reach a yield as high as 31.5 mmol/g-cat after 4-h reaction, meanwhile with a high CO yield of 279.3 μmol/g-cat. The mechanism is proposed from both dynamic (adsorption/desorption of reactants/products) and thermodynamic (redox potential, change in Gibbs free energy of key intermediates) point of view. This work not only provides useful information on the reaction selectivity between CO 2 reduction and H 2 evolution, but also pave a way to adjust the yield of a specific product upon photocatalysis.

CAS / MDL: 107-15-3 7440-66-6
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。