文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第3493至3504个,产品总数4,488个

切换升序
Cu
CRYSTENGCOMM · 2022 ·Vol. 24 ·期 36 ·6400-6407 · IF 3.756

L-Lysine derived fabrication of Cu@Ni core–satellite nanoassemblies as efficient non-Pt catalysts for the methanol oxidation reaction

Anzhou Yang,Qiuzi Huang,Ziqi Wei,Zehan Yu,Meifeng Cui,Wu Lei,Yawen Tang,Xiaoyu Qiu

Designing cost-effective, highly active, and durable noble-metal-free electrocatalysts as alternative electrode materials for the methanol oxidation reaction (MOR) is of significant importance for practical applications. Herein, we report a facile one-pot synthetic route to construct Cu@Ni core–satellite nanoassemblies (CS-NAs) with the assistance of eco-friendly L-lysine, which involves the spontaneous process of preferential formation of the Cu core followed by self-assembly growth of Ni satellites. The selection of the Cu core is beneficial for enhancing the charge transfer and tuning the electronic structure of Ni satellites, as well as serving as a self-skeleton to enhance the structural stability for catalysis. Meanwhile, the tiny Ni satellites could be fully exposed, which not only produce a larger number of valid active sites, but also provide a short electron and ion transport distance. As a result, the Cu@Ni CS-NAs are qualified as superior and durable electrocatalysts for the MOR, affording 29.6 mA cm−2 at 1.6 V with long-term chronoamperometric stability.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Journal of Materials Chemistry A · 2012 ·Vol. 1 ·期 4 ·1319-1325 · IF 0

Highly sensitive and selective detection of Cu(II) by periodic mesoporous rhodamine derivative-based organosilicas with crystal-like pore walls

Xiaoyong Qiu,Shuhua Han,Meng Gao

Rhodamine-6G Schiff-base bridged periodic mesoporous organosilicas (RSPMOs) were successfully synthesized by co-condensation of rhodamine Schiff-base derivative-bridged organosilanes and tetraethoxysilane (TEOS), using the ionic liquid 1-hexadecyl-3-methylimidazolium bromide (C16mimBr) as a structure-directing agent. The formation mechanism of ordered mesoporous hybrid materials with crystal-like pore walls was mediated by the self-assembly of both the long-chain ionic liquid and the new organosilane precursors. As the molar fraction of the new organosilane precursors was above 1%, hybrid materials with crystal-like pore walls were obtained, which was due to the face-to-face π–π interaction between rhodamine moieties of the new organosilane precursors within the framework. Little or no fluorescence emission of the hybrid material with rhodamine Schiff-base units was observed because of the existence of spirolactam in rhodamine moieties before chelating with metal ions. However, a dramatic enhancement in fluorescence emission was shown due to opening of the spiro structure in rhodamine moieties, which was induced by intramolecular charge transfer from metal ions to rhodamine units when the hybrid materials chelated with corresponding metal ions. RSPMOs showed high sensitivity and selectivity towards Cu2+ in aqueous solutions with good tolerance for other metal ions, showing great superiority in practical application.

✓ 已验证 DOI
查看原文 查看 PubMed
Frontiers in Chemistry · 2019 · IF 3.782

In situ Growth of Cu2O/CuO Nanosheets on Cu Coating Carbon Cloths as a Binder-Free Electrode for Asymmetric Supercapacitors

Xu Lina,Li Jiao,Sun Haibin,Guo Xue,Xu Jiakun,Zhang Hua,Zhang Xiaojiao

Cu2O/CuO nanosheets in-situ grown on Cu-Carbon cloths (Cu-CCs), namely Cu2O/CuO@Cu-CCs, are constructed by a simple strategy with electroless copper plating, chemical etching, and thermal dehydration. The as-prepared material is directly used as binder-free electrodes for supercapacitors (SCs). CCs coated with Cu, as the current collector, can effectively promote the charge collection and electron transfer, while the hierarchical Cu2O/CuO nanosheets provide massive active sites for fast faradic reactions. The composite electrode exhibits high specific capacitance [1.71 F cm−2, equivalent to 835.2 F g−1, at the current density of 10 mA cm−2 (3.57 A g−1)]. The asymmetric supercapacitor device using Cu2O/CuO@Cu-CCs as the positive electrode and activated carbon as the negative electrode, achieves a superior energy density up to 60.26 Wh kg−1 at a power density of 299.73 W kg−1 and an excellent long-term cycling stability (9.65% loss of its initial capacitance after 5,000 cycles). The excellent electrochemical performance is mainly ascribed to the unique hierarchical structure of Cu2O/CuO@Cu-CCs, making it attractive as a potential electrode material for high performance SCs.

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
APPLIED SURFACE SCIENCE · 2023 · IF 6.7

Cu single atoms/O doping g-C3N4 mediated photocatalytic activation of peroxymonosulfate for ultrafast carbamazepine removal via high 1O2 yield

Yandong Xu,Mengxia Guo,Chengjun Ge,Ping Zhang,Wen Xu,Linlin Zhang,Shihao Zhou,Jianjun Liao

To facilitate the activation of peroxymonosulfate, it is useful to simultaneously tune the coordination environment of the single-atom catalyst and develop a structure that effectively exposes the active site. In this study, we used a pre-assembly calcination method to prepare a structure composed of Cu single atoms on O-doped g-C 3 N 4 nanosheets (5Cu-OCN), and studied how this structure can effectively activate PMS under visible light catalysis. Compared to the g-C 3 N 4 , the 5Cu-OCN exhibits significantly improved PMS activation effect. Cu single atoms play an important role in catalyzing PMS activation and removing carbamazepine from solution, and explain the contribution of photo generated electrons and holes in enhancing the performance of catalysts in PMS activation. Furthermore, the constructive cooperation of 5Cu-OCN photocatalysts by PMS activation and photocatalysis has been shown to be useful in real aqueous systems. The results indicate that the main pathway for the generation of 1 O 2 is through the 5Cu-OCN photocatalytic process to promote PMS activation. In addition, the active reaction species involved in the degradation of carbamazepine were identified. This study provides an efficient copper monoatomic catalyst that can react to visible light for 1 O 2 based advanced oxidation processes.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF ALLOYS AND COMPOUNDS · 2019 · IF 4.175

Scalable production of hierarchical N-doping porous carbon@Cu composite fiber based on rapid gelling strategy for high-performance supercapacitor

Yang Hui,Ye Shewen,Wang Yunfeng,Zhou Jiaming,Jia Jingwen,Chen Jiahao,Zeng Qinqin,Liang Tongxiang

Because of high specific surface area, rich active sites and superior electron conductivity, element-doping porous carbon@metal nanoparticles composite is identified as a promising electrode material for supercapacitor . Herein, guar gum (GG) and melamine are used as carbon and N sources, respectively. Because of the high affinity between Cu(OH) 2 and GG, gel fibers with high yield and good size distribution can be obtained; after carbonization and pickling, the N-doping porous carbon@Cu composite fiber (NPCF@Cu), with high specific surface area, rich porous structure, and uniform distributed Cu nanoparticles, has been successfully prepared. Results show that the NPCF@Cu-10 exhibits high specific capacitance (334.6 F g −1 at 2 A g −1 ) and excellent rate capability (62.7% capacity retention at 50 A g −1 versus that of 2 A g −1 ). Furthermore, its superior electrochemical performance in two-electrode configuration demonstrates that the NPCF@Cu can be utilized as a promising electrode material for supercapacitor.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Journal of Environmental Sciences · 2016 · IF 2.208

Synthesis and kinetics investigation of meso-microporous Cu-SAPO-34 catalysts for the selective catalytic reduction of NO with ammonia

Jixing Liu,Fuhong Yu,Jian Liu,Lifeng Cui,Zhen Zhao,Yuechang Wei,Qianyao Sun

A series of meso-microporous Cu-SAPO-34 catalysts were successfully synthesized by a one-pot hydrothermal crystallization method, and these catalysts exhibited excellent NH 3 -SCR performance at low temperature. Their structure and physic chemical properties were characterized by means of X-ray diffraction patterns (XRD), Scanning electron microscopy (SEM), Transmission electron microscopy (TEM), N 2 sorption-desorption, nuclear magnetic resonance (NMR), Inductively Coupled Plasma-Atomic Emission spectrometer (ICP-AES), X-ray absorption spectroscopy (XPS), Temperature-programmed desorption of ammonia (NH 3 -TPD), Ultraviolet visible diffuse reflectance spectroscopy (UV-Vis DRS) and Temperature programmed reduction (TPR). The analysis results indicate that the high activities of Cu-SAPO-34 catalysts could be attributed to the enhancement of redox property, the formation of mesopores and the more acid sites. Furthermore, the kinetic results verify that the formation of mesopores remarkably reduces diffusion resistance and then improves the accessibility of reactants to catalytically active sites. The 1.0-Cu-SAPO-34 catalyst exhibited the high NO conversion (>   90%) among the wide activity temperature window in the range of 150–425°C.

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
JOURNAL OF ORGANIC CHEMISTRY · 2020 · IF 4.335

Synthesis of Allenyl-Bdan via the Cu(I)-Catalyzed Borylation of Propargylic Alcohols with the Unsymmetric Diboron Reagent (Bpin-Bdan)

Lujia Mao,Chunlei Li,Libo Xiang,Dejun Fu,Wangyang Ma,Qing Ye

The synthesis of allenyl-Bdan has been realized via the Cu(I)-catalyzed borylation of propargylic alcohols. This methodology offers a facile and efficient pathway toward allenyboronates with diverse functional groups due to the simple access to the substrates. The substrates bearing ester groups are well-tolerated in the synthesis of allenyl-Bdan under the Lewis acidic conditions. The structures of two allenyl-Bdan were further confirmed via single-crystal X-ray diffraction.

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
ACS Omega · 2019 · IF 2.584

Enhanced Removal of Veterinary Antibiotic Florfenicol by a Cu-Based Fenton-like Catalyst with Wide pH Adaptability and High Efficiency

Ting Chen,Zhiliang Zhu,Hua Zhang,Xiaolin Shen,Yanling Qiu,Daqiang Yin

The study on the removal of refractory veterinary antibiotic florfenicol (FF) in water is still very limited. In this study, an efficient Fenton-like catalyst was developed by synthesizing a series of Cu-based multi-metal layered double hydroxides (CuNiFeLa-LDHs) to degrade FF in aqueous solution. In the experiments, the screened CuNiFeLa-2-LDH with the molar ratio of La3+/(Fe3+ + La3+) = 0.1 exhibited high catalytic activity, achieving almost complete degradation of 5 mg L–1 FF under 5 mmol L–1 H2O2 conditions. The mechanisms revealed that the enhanced catalytic performance was ascribed to the existence of Ni which accelerated the electron transfer rate and La which served as a Lewis acidic site to provide more reactive sites in this Cu-dominated Fenton-like reaction, further generating •OH, •O2–, and O21 as active species to attack pollutants directly. Interestingly, the catalyst showed a wide pH adaptability and little release of copper ions to the solution. The regenerated CuNiFeLa-2-LDH is demonstrated to be a stable and reliable material for florfenicol degradation.

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
Journal of Materials Chemistry A · 2020 ·Vol. 8 ·期 35 ·18302-18309 · IF 11.301

Selective CO2-to-formate electrochemical conversion with core–shell structured Cu2O/Cu@C composites immobilized on nitrogen-doped graphene sheets

Da Li,Tongtong Liu,Linlin Huang,Jing Wu,Jiannan Li,Liang Zhen,Yujie Feng

The electrochemical conversion of CO2 into fuels and chemicals attracts worldwide attention for tackling global warming and energy crises. However, the efficiencies and selectivities for targeted products such as formate are still far from satisfactory. Herein, core–shell structured Cu2O/Cu@C immobilized on nitrogen-doped graphene sheets (Cu2O/Cu@C/NG) is prepared and used for CO2 reduction. Cu2O/Cu@C/NG yields higher activity towards formate in terms of a lower onset potential (−0.38 V versus RHE) and higher faradaic efficiency (82.1 ± 1.2%), as well as stable performance over 30 h. The enhancements in selectivity and activity are attributed to the synergistic effects between Cu sites and N doping, simultaneously improving CO2 adsorption and the interfacial charge transfer process. Additionally, N doping restrains hydrogen evolution on the copper sites, leaving more available sites for CO2 reduction. This study provides an efficient strategy to increase the activities of electrocatalysts for CO2-to-formate electroreduction.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Reaction Kinetics Mechanisms and Catalysis · 2018 ·Vol. 124 ·期 2 ·587-601 · IF 1.515

Comparison of NO conversion over Cu/M (M = TiO2, Al2O3, ZSM-5, carbon nanotubes, activated carbon) catalysts assisted by plasma

Wang Tao,Zhang Xinyu,Liu Jun,Liu Hanzi,Sun Baomin

NO conversion using dielectric barrier discharge (DBD) plasma with different catalysts was investigated. Cu/TiO 2 , Cu/Al 2 O 3 , Cu/ZSM-5, Cu/CNTs and Cu/AC catalysts were prepared by incipient wetness impregnation with 4 wt% Cu loaded. BET, SEM, XRD, XPS, H 2 -TPR, NH 3 -TPD were used to measure and evaluate various catalysts. Compared with the plasma only process, the combination of plasma with different catalysts significant improved the NO conversion rate. The highest NO conversion rate of 76% could be achieved with Cu/ZSM-5 catalyst at the energy density of 184 J/L. The results indicate that Cu species over the support ZSM-5 can produce high concentrations of CuO, largest specific surface area, largest amounts of acidity and lowest reduction temperature (209 °C), these factors conducive to plasma-catalyst reaction. Besides, Cu/TiO 2 and Cu/Al 2 O 3 catalysts exhibited excellent NO conversion at the low energy density because of the low thermal stability. After plasma-catalyst reaction, the reducibility of CuO and Cu 2 O over supports decreased and the peak position of acid sites shifted to lower temperature.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
Journal of Materials Chemistry A · 2018 ·Vol. 6 ·期 21 ·9922-9929 · IF 9.931

Environmentally friendly synthesis of flexible MOFs M(NA)2 (M = Zn, Co, Cu, Cd) with large and regenerable ammonia capacity

Yang Chen,Bohan Shan,Chengyin Yang,Jiangfeng Yang,Jinping Li,Bin Mu

Two environmentally friendly and efficient synthesis methods, NH3-assisted synthesis and solvent-evaporated conversion, have been developed for the synthesis of a series of M(NA)2 (M = Zn, Co, Cu, Cd; NA = nicotinate) flexible MOFs. The two-dimensional M(NA)2 (M = Zn, Co) and three-dimensional M(NA)2 (M = Cu, Cd) materials exhibit peculiar structural transformation. These frameworks can be obtained from dehydration of M(NA)2(H2O)4 (M = Zn, Co, Cu, Cd) which are zero-dimensional supramolecular structures. Interestingly, the structural transformation of M(NA)2 (M = Zn, Co, Cd) is reversible after liquid water adsorption. Due to the flexible structure of these MOFs, they exhibit abnormal NH3 adsorption properties. The two-dimensional Zn(NA)2 shows a gate-opening behavior for NH3 adsorption. Its layers opened at a pressure of 0.22 bar in the first cycle, resulting in a two-step NH3 uptake with a capacity of 10.2 mmol g−1 at 1 bar. The gate-opening pressure shifted to a lower value with cycles. Co(NA)2 has a huge NH3 uptake of 17.5 mmol g−1, which is top-ranking among the reported values. For the NH3 adsorption over Cu(NA)2 and Cd(NA)2, the adsorption rates increase and adsorption equilibrium is achieved faster after three cycles. Their maximum capacity at 1 bar is 13.4 and 6 mmol g−1, respectively. More importantly, all MOFs can be regenerated under vacuum and heating conditions of 150 °C for 70 min, and they all retained the capacity. The advantages of environmentally friendly synthesis, large adsorption capacity, and regenerable properties indicate that M(NA)2 (M = Zn, Co, Cu) are promising candidates for NH3 adsorption.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES · 2021 · IF 6.953

Ultralight and shapeable nanocellulose/metal-organic framework aerogel with hierarchical cellular architecture for highly efficient adsorption of Cu(II) ions

Liuting Mo,Yulin Shen,Yi Tan,Shifeng Zhang

Water contamination by heavy metal pollutants is a global concern due to detrimental effects on the environment and human health. Regenerable, high-performance heavy metal sorbents are urgently demanded for improved water purification . Herein, we present an elegant strategy of interweaving metal–organic framework (MOF-808-ethylene diamine tetraacetic acid) and TEMPO-oxidized cellulose nanofibers (TCNF) to construct freeways in hybrid aerogels for rapid and efficient transport and capture of heavy metal ions. In this strategy, a postsynthetic ligand exchange approach is applied to introduce ordered and high-density accessible binding sites for metal ions. The prepared aerogels show excellent shapeability, ultralow density less than 0.005 g cm −3 , and high hierarchical porosity of 99.82%. Furthermore, benefiting from the abundant chelating groups and accessible surface areas, these aerogels exhibit outstanding uptake capacity of 300 mg g −1 and rapid adsorption kinetics of 0.031 mg g −1  h −1 for Cu(II) ions, significantly better than conventional TCNF aerogels. The aerogels could be easily regenerated at least five cycles without greatly performance loss. These aerogels could effectively remove diverse heavy metal ions from complicated contaminated water. Thus, this work provides a novel method to synthesize environmental-friendly, regenerable, and high-performance adsorption materials for water remediation.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。