ELECTROCHIMICA ACTA
·
2025
·
IF 5.6
Gang Wu,Peng Wu,Bo Huang,Wenhao Zhu
In order to improve the electrochemical performance of LiFePO 4 (LFP) electrode, Cu and Mg co-doped LFP cathode materials were synthesized via a high-temperature solid-state reaction method. The phase purity and morphology were characterized by X-ray diffraction(XRD) and scanning electron microscopy(SEM). Based on co-doped cathode material, the coin-type cells was assembled for galvanostatic charge-discharge testing. The combined synergistic effect of co-doping into LFP were investigated through density functional theory(DFT) calculations. The first-principles calculation method was employed to study the thermodynamic stability, electronic structure properties, intercalation voltage, and lithium-ion diffusion characteristics of Cu and Mg-doped LiFePO 4 . The results show that smaller particle sizes and larger specific surface areas for Cu and Mg co-doping. It facilitates the diffusion of LFP on the surface and within the bulk of the cathode material during charge and discharge processes. This leads to reduce polarization and thus improve electrochemical performance. A higher initial discharge specific capacity of 142.4 mAh/g is exhibited compared to the undoped counterpart. The incorporation of Cu and Mg reduces the band gap from 3.66 eV to 0.4 eV. This suggests that the electrical conductivity is improved due to electrons more easily transition from the valence band to the conduction band. After co-doping, the lithium ion diffusion barrier decreases from 1.08 eV to 0.75 eV. It is predicted that lithium ions diffuse in LFP-CM six orders of magnitude faster than in its intrinsic counterpart. Meanwhile, a platform with a high operating voltage of 3.64 V makes a positive contribution to the electrochemical performance.
✓ 已验证
产品关联
DOI
高影响因子
FOOD CHEMISTRY
·
2025
·
IF 9.8
Xishun Peng,Yiheng Yuan,Anjiang Lu,Cunwei Wang,Caizhen Zu,Haili Zhang,Zhongchen Bai
Glyphosate (Gly) residues in agricultural products have a serious health risk, so it is urgent to seek a sensitive and convenient method for recognizing Gly residues in food. In this study, we proposed an electrochemical surface-enhanced Raman spectroscopy (EC-SERS) sensor of polyaniline/reduced graphene oxide/Ag/Cu (PANI/RGO/Ag/Cu) film to detect Gly residues. The EC-SERS sensor of PANI/RGO/Ag/Cu film had a large specific surface area, which could increase the binding sites of cu 2+ /Gly clathrates for boosting specifically its SERS signal. Moreover, Ag/Cu nanoparticles on the surface of film could effectively increase the differential pulse voltammetry signal and SERS signal of Gly molecules. The limit of detection of EC-SERS sensor to Gly could reach 1.9 nM. In addition, the EC-SERS sensor we prepared could also sensitively identify Gly residues on fresh fruit peels. The PANI/RGO/Ag/Cu film we proposed in this paper has great potential for selective and accuracy detecting Gly residues in agricultural products.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Biosurface and Biotribology
·
2025
·Vol. 11
·期 1
·e12090
·
IF 1.8
Yi Duan,Qi Wu,Jiangtao Lin,Yourong Duan,Qi Wang,Yuanyuan Li
In this study, the authors designed a paper-based electrochemical immunodevice modified with copper embedded in copper sulphide hollow nanocages wrapped with Au nanoparticles (Cu@CuS@Au NPs) for the specific detection of prostate-specific antigen (PSA), aiming to advance point-of-care testing. The large specific surface area of Cu@CuS nanocages enables efficient capture of biotin antibodies, leading to the direct amplification of the signal through the inhibition of electron transport in the redox process of Cu, eliminating the need for universal redox electron mediators. Additionally, Au NPs on the surface of Cu@CuS can accelerate charge transfer and conjugate with anti-PSA. The hierarchical morphology and structure of Cu@CuS nanocages were characterised using scanning electron microscopy and transmission electron microscopy. The fabrication process of the immunodevice was monitored using cyclic voltammetry and electrochemical impedance spectroscopy analyses. PSA was sensitively detected using differential pulse voltammetry on this proposed immunodevice within a linear range from 0 to 100 ng/ml ( R 2 = 0.996), achieving a low detection limit of 0.077 ng/ml. In addition, the practicality of the developed immunosensor has been proven by successfully detecting PSA in human serum samples obtained from clinical settings. The integration of electrochemical sensors and microfluidic devices holds promise for developing cost-effective approaches in clinical immunoassays.
✓ 已验证
产品关联
DOI
高影响因子
RARE METALS
·
2025
·
IF 11
Zhang Tong,Shi Zhen-Dong,Xing Chang-Sheng,Wu Yun-Zhong,Liu Bin,Guan Ye-Kang,Jian Yu,Shuang Jia-Xu,Sheng Jie,Wang Li-Dong,Fei Wei-Dong
Graphene-copper (Gr-Cu) composites exhibit significant potential for industrial applications. Among the methods for fabricating Gr-Cu composites, the in-situ growth method stands out as a simple yet effective approach. However, graphene converted from liquid or solid molecules by the traditional in-situ growth method often exhibits numerous defects, thereby reducing its effectiveness in enhancing the electrical properties of the composites. To address this issue, we developed an innovative and efficient method, referred to as the “confined-parallel-space in-situ growth (CPS) method,” to grow high-quality graphene and fabricate high-conductivity Gr-Cu composites. Oleic acid was chosen as the small molecular carbon source and confined between copper sheets obtained by rolling dendritic copper powder. This carbon source underwent conversion into oriented, high-quality graphene in the confined space at high temperature. The high-quality graphene sheets serve as continuous electron transport channels, significantly improving the conductivity of the composite. The composite prepared by the CPS method (CPS-composite) demonstrates unique conductivity, exceeding that of standard annealed copper at temperatures above 40 °C and notably outperforming it by 3.2% at 160 °C. In addition, compared to the composite with a similar carbon content prepared by the traditional in-situ growth method, the yield strength of the CPS-composite increased by 23.6%, while the strengthening efficiency of graphene improved by 146.6%, achieving an ultrahigh value of 489 at a carbon volume fraction of 0.086 vol%. The CPS method emerges as a novel strategy for fabricating high-performance, low-cost, and large-scale graphene-copper composites using small molecular carbon sources, making it suitable for industrial production. Graphical abstract
✓ 已验证
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2025
·
IF 13.2
Wen-Jing Yi,Jingyi Yang,Yongzhen Gao,Xiaotian Zhou,Wenlei Zhang,Meng Zhang,Zhongyi Liu
Copper catalysts have garnered considerable interest as promising active metals for upgrading biomass resources, especially in selective furfural (FF) hydrogenation reaction. However, effectively enhancing the interactions between active metals and supports while providing abundant surface reaction sites remains enormous challenge to improve catalytic performance. Herein, we present a unique hydrotalcite-derived Cu-based catalyst featuring well-dispersed Cu 0 /Cu + nanodots towards selectively hydrogenated FF to furfuryl alcohol (FA). Impressively, the optimized CuMg 3 Al-R catalyst exhibits the exceptional hydrogenation performance, achieving almost 100 % FF conversion and 99.3 % FA selectivity. Comprehensive studies reveal that the small sized Cu species with well dispersion, the synergistic effect of Cu 0 and Cu + , combined with the selective adsorption and activation of C O groups jointly contribute to the enhanced catalytic performance. This work offers a promising strategy to rationally design well-dispersed Cu species for the selective hydrogenation of C O groups, which holds great significance for biomass-related hydrogenation reaction.
✓ 已验证
产品关联
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2023
·
IF 6.7
Yandong Xu,Mengxia Guo,Chengjun Ge,Ping Zhang,Wen Xu,Linlin Zhang,Shihao Zhou,Jianjun Liao
To facilitate the activation of peroxymonosulfate, it is useful to simultaneously tune the coordination environment of the single-atom catalyst and develop a structure that effectively exposes the active site. In this study, we used a pre-assembly calcination method to prepare a structure composed of Cu single atoms on O-doped g-C 3 N 4 nanosheets (5Cu-OCN), and studied how this structure can effectively activate PMS under visible light catalysis. Compared to the g-C 3 N 4 , the 5Cu-OCN exhibits significantly improved PMS activation effect. Cu single atoms play an important role in catalyzing PMS activation and removing carbamazepine from solution, and explain the contribution of photo generated electrons and holes in enhancing the performance of catalysts in PMS activation. Furthermore, the constructive cooperation of 5Cu-OCN photocatalysts by PMS activation and photocatalysis has been shown to be useful in real aqueous systems. The results indicate that the main pathway for the generation of 1 O 2 is through the 5Cu-OCN photocatalytic process to promote PMS activation. In addition, the active reaction species involved in the degradation of carbamazepine were identified. This study provides an efficient copper monoatomic catalyst that can react to visible light for 1 O 2 based advanced oxidation processes.
✓ 已验证
DOI
高影响因子
Journal of Physical Chemistry C
·
2020
·
IF 4.189
Abubakar Yusuf,Yong Sun,Yong Ren,Colin Snape,Chengjun Wang,Hongpeng Jia,Jun He
Defect engineering is an effective strategy to enhance the activity of catalysts for various applications. Herein, it was demonstrated that in addition to enhancing surface properties via doping, the influence of dopants on the surface–intermediate interaction is a critical parameter that impacts the catalytic activity of doped catalysts for low-temperature formaldehyde (HCHO) oxidation. The incorporation of Co into the lattice structure of δ-MnO2 led to the generation of oxygen vacancies, which promoted the formation of surface active oxygen species, reduced activation energy, and enhanced catalytic activity for low-temperature oxidation of HCHO. On the contrary, Cu doping led to a drastic suppression of the catalytic activity of δ-MnO2, despite its enhanced redox properties and slight increase in the surface concentration of active oxygen species, compared to pristine δ-MnO2. Diffuse reflectance infrared Fourier transform analysis revealed that in the presence of Cu, carbonate intermediate species accumulate on the surface of the catalysts, leading to partial blockage of active sites and suppression of catalytic activity.
✓ 已验证
DOI
高影响因子
CRYSTENGCOMM
·
2022
·Vol. 24
·期 36
·6400-6407
·
IF 3.756
Anzhou Yang,Qiuzi Huang,Ziqi Wei,Zehan Yu,Meifeng Cui,Wu Lei,Yawen Tang,Xiaoyu Qiu
Designing cost-effective, highly active, and durable noble-metal-free electrocatalysts as alternative electrode materials for the methanol oxidation reaction (MOR) is of significant importance for practical applications. Herein, we report a facile one-pot synthetic route to construct Cu@Ni core–satellite nanoassemblies (CS-NAs) with the assistance of eco-friendly L-lysine, which involves the spontaneous process of preferential formation of the Cu core followed by self-assembly growth of Ni satellites. The selection of the Cu core is beneficial for enhancing the charge transfer and tuning the electronic structure of Ni satellites, as well as serving as a self-skeleton to enhance the structural stability for catalysis. Meanwhile, the tiny Ni satellites could be fully exposed, which not only produce a larger number of valid active sites, but also provide a short electron and ion transport distance. As a result, the Cu@Ni CS-NAs are qualified as superior and durable electrocatalysts for the MOR, affording 29.6 mA cm−2 at 1.6 V with long-term chronoamperometric stability.
✓ 已验证
DOI
高影响因子
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS
·
2021
·
IF 4.539
Fang Zhou,Yan Zhu,Longlai Yang,De-Quan Yang,Edward Sacher
Aqueous dispersions of AgCu nanoparticles (NPs), with enhanced antibacterial efficacy, have been prepared through the catalyzed reduction of Cu ions by PVP/PVA-stabilized Ag nanoparticles at 85 °C. The effects of Cu concentration and heating time on NP morphology and antibacterial efficacy were investigated, using TEM, UV-Vis and FTIR spectroscopies , and antibacterial evaluations. The enhanced antibacterial performance of these NPs was correlated with Ag ion release. We propose a simple model of AgCu NP formation, and an enhanced antibacterial efficacy mechanism involving Ag ion release, in which AgCu NPs formation plays a role to control of Ag ion release.
✓ 已验证
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2019
·
IF 4.175
Yang Hui,Ye Shewen,Wang Yunfeng,Zhou Jiaming,Jia Jingwen,Chen Jiahao,Zeng Qinqin,Liang Tongxiang
Because of high specific surface area, rich active sites and superior electron conductivity, element-doping porous carbon@metal nanoparticles composite is identified as a promising electrode material for supercapacitor . Herein, guar gum (GG) and melamine are used as carbon and N sources, respectively. Because of the high affinity between Cu(OH) 2 and GG, gel fibers with high yield and good size distribution can be obtained; after carbonization and pickling, the N-doping porous carbon@Cu composite fiber (NPCF@Cu), with high specific surface area, rich porous structure, and uniform distributed Cu nanoparticles, has been successfully prepared. Results show that the NPCF@Cu-10 exhibits high specific capacitance (334.6 F g −1 at 2 A g −1 ) and excellent rate capability (62.7% capacity retention at 50 A g −1 versus that of 2 A g −1 ). Furthermore, its superior electrochemical performance in two-electrode configuration demonstrates that the NPCF@Cu can be utilized as a promising electrode material for supercapacitor.
✓ 已验证
DOI
高影响因子
ANALYTICA CHIMICA ACTA
·
2022
·
IF 6.911
Sijia Tian,Chi Zhang,Mincong Yu,Yunchao Li,Louzhen Fan,Xiaohong Li
Laccase mimics are multicopper oxidase highly important for biotechnology and environmental evaluation/remediation. However, buffer species-dependent catalytic activity is rarely investigated. Herein, through Cu 2+ coordinating with adenine (A), gram-scale Cu-Adenine nanosheets are synthesized. As a laccase mimic, Cu-Adenine exhibits excellent catalytic performance in 10 mM Tris-HAc, and greatly decreases in 10 mM MES (4-morpholine ethanesulfonic acid) and further decreases in 10 mM HEPES (N-2-hydroxyethyl piperazine- N ′-2-ethanesulfonic acid) (pH = 7, 25 °C). Moreover, upon gradually increasing NaCl to 500 mM, the catalytic activity further enhances. Such the buffer species/NaCl concentration-dependent catalytic activity is explained with the help of K m (Michaelis constant) and V max (maximum rate value) Based on the fact that Cu-Adenine could differentially catalyze phenolic substrates (2,4-dichlorophenol (2,4-DP), o-chlorophenol (o-CP), m-chlorophenol (m-CP), p-chlorophenol (p-CP), phenol and catechol), a colorimetric sensor array with three buffer solutions as sensing channels is designed for simultaneously discriminating 2,4-DP, o-CP, m-CP, p-CP, phenol and catechol as low as 10 μM, even quantifying 2,4-DP (as a model analyst). The performance is further validated through accurately identifying binary and ternary mixtures , and even 18 blind samples containing one of six phenols and ternary mixtures. Finally, the designed sensor array is successfully applied for identifying six representative phenols in various simulated water samples, presenting great potential and valuable applications for large-scale scanning levels of phenols in water samples.
✓ 已验证
DOI
PubMed
高影响因子
CELLULOSE
·
2022
·Vol. 29
·期 15
·8353-8370
·
IF 6.123
Mo Liuting,Zhang Shifeng
Aerogels, as attractive absorbents, have played essential roles in water treatment due to their light weight, high porosity, and exceptional absorption capacity. Nevertheless, conventional synthetic aerogel usually shows isotropic architectures, unsatisfactory mechanical performance, complex preparation process, and scale-limited fabrication, greatly limiting its applications in water remediation. In this study, inspired by the anisotropic architecture of natural wood, a biomimetic strategy was reported to prepare anisotropic, robust and environmental resistant aerogel composites via assembling semi-interpenetrating polymer networks (semi-IPNs) into the delignified wood template. The anisotropic structure endows the aerogel with excellent anisotropic mechanical behavior. The intermolecular hydrogen bonds of the cellulose microfibrils, the strong interfacial hydrogen bonds between cellulose chains and PI polymer networks, as well as the covalent bonds of semi-IPNs systems enable the aerogel composites to have a high yield strength of 566 kPa and Young’s modulus of 56.335 MPa. The resulting aerogel composite exhibits a high saturation adsorption capacity of 296 mg g −1 at about 100 min for Cu(II) ions. The composite is easily regenerated and recycled five cycles without apparent removal efficiency loss. This study presents a promising, eco-friendly, low-cost, and feasible strategy for scalable fabricating anisotropic, robust, highly efficient, and environmental resistant aerogel composites for heavy metal ions removal. Graphical abstract
✓ 已验证
DOI
高影响因子