Nanoscale
·
2023
·Vol. 15
·期 38
·15739-15748
·
IF 6.7
Liang Li,Zequan Liu,Demin Jiang,Min Song,Yuqiao Wang
Sluggish oxygen reduction reaction (ORR) kinetics and biofilm formation limit the power generation and stability of microbial fuel cells (MFCs). Herein, bimetallic CoSn nanoparticles anchored on ZIF-derived N-doped carbon (CoSn@NC) were designed and synthesized as bifunctional catalysts to accelerate the ORR and improve the antibacterial activity. Sn modulated the electronic structure of bimetallic CoSn by drawing electrons from Co. Electron redistribution of CoSn@NC optimized the O2 adsorption at Co sites for rapid ORR kinetics. The up-shifted d-band center of Co sites reduced the energy barrier of the rate-determining step for *O formation, resulting in efficient catalytic activity. Bimetallic CoSn nanoparticles were beneficial for the four-electron transfer process for more ˙OH species production. Sn2+ and ˙OH synergistically improved the antibacterial activity of CoSn@NC to inhibit the growth of the cathode biofilm and accelerate mass-charge transfer. CoSn@NC demonstrated superior oxygen reduction activity with a half-wave potential of 0.84 V and an onset potential of 0.90 V, respectively. The MFCs assembled with the CoSn@NC cathodic catalyst exhibited an excellent power density of 1380 mW m−2 and long-term stability for 105 h. This work provides a strategy for the design of antibacterial ORR catalysts for improved catalytic activity and long-term stability.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
APPLIED CATALYSIS B-ENVIRONMENTAL
·
2023
·
IF 22.1
Rui Sui,Jing Chai,Xuerui Liu,Jiajing Pei,Xuejiang Zhang,Xingdong Wang,Yu Wang,Juncai Dong,Wei Zhu,Wenxing Chen,Liang Zhang,Zhongbin Zhuang
The metal-nitrogen-carbon (M-N-C) type oxygen reduction reaction (ORR) catalysts are promising for hydroxide exchange membrane fuel cells, but catalysts with further improved performance are challenging. Here, we report the efficient improvement of the ORR activity of M-N-C catalysts by employing highly polarizable metal cation Ag + . Ag, Fe single atomic sites embedded in concave nitrogen doped carbon (Ag 1 Fe 1 /CNC) is successfully synthesized and shows high performance towards ORR, indicating by both the ultra-high half-wave potential of 0.917 V and membrane electrolyte assembly performance of peak power density up to 1.26 W cm −2 . The binding energy of the ORR intermediates on the highly polarizable Ag site in Ag 1 Fe 1 /CNC was significantly tuned by the adjacent Fe site by more than 0.2 eV, and thus leading to a low theoretical ORR overpotential of only 0.398 V. The employment of the highly polarizable metal cation brings a novel and efficient approach to construct highly active catalysts.
✓ 已验证
产品关联
DOI
高影响因子
FUEL
·
2023
·
IF 7.4
Wenrui Yan,Lu Liu,Liuru Liu,Quan Zhu,Bo Wang
The coking problem of hydrocarbon fuel pyrolysis is the key factor affecting the application of active cooling technology for high-speed aircraft. The purpose of this work is to investigate the coking inhibition performance and coking mechanism of using ammonia as an additive during the thermal cracking. In this study, the pyrolysis and coking characteristics of supercritical n-decane were experimentally studied using an electrically heated tube. ICP-OES (Inductively Coupled Plasma Optical Emission Spectrometer), GC–MS (Gas Chromatograph Mass Spectrometer), SEM (Scanning Electron Microscope), EDS (Energy Dispersive Spectroscopy), TPO (Temperature Programmed Oxidation), and Raman spectroscopy are applied to characterize the anti-coking performance of the additives. The results show that the additive hardly affects the cracking of the fuel under high-temperature conditions, but the coke mass deposited on the inner surface of the tube is significantly reduced, and the coking inhibition rate can reach 80% at 750 °C. The addition of additives reduced the graphitization degree and oxidative activity of the coke. The maximum oxidation temperature of the coke obtained at 750 °C was reduced by 145 °C, and the I D /I G value of the Raman spectroscopy peak-fitting was 3.29. The new mechanism of the effect of additives on the formation of coking precursors and the deposition of coke on the surface of the tube wall is proposed. Ammonia can react with Ni of the inner metal tube and radicals generated by fuel cracking to form a carbonized film, achieving the effect of inhibiting metal catalytic coking. Meanwhile, the amino radicals generated by ammonia dehydrogenation can regulate the coking reaction path by forming a stable p - π conjugate structure with unsaturated radicals. Therefore, the research will contribute to a deeper comprehension of the coking inhibition mechanism and the development of more effective coking inhibitors, providing new technical support for active cooling technologies.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Materials & Interfaces
·
2023
·
IF 9.5
Jia Yang,Qi Peng,Yuanlu Xu,Bowen Lv,Yanming Liu,Xinfei Fan
Solar-driven interfacial steam generation (SISG) is a promising technology for alleviating freshwater shortage. However, when the SISG technology is applied to wastewater treatment, the contaminant would be enriched in residual bulk water. Herein, a dual-functional evaporator was constructed via tactfully decorating Co/N-doped graphene oxide (GO) on melamine foam (MF), which can simultaneously achieve efficient vapor production and source water purification. N-doped carbon nanotubes (NCNTs) endowed evaporators with powerful light absorption and water transport performance, guaranteeing an evaporation rate of 2.02 kg m–2 h–1 under 1 sun irradiation. Meanwhile, the catalytic activity of the carbon layer was adjusted by the N dopant and embedded Co particles, providing abundant active sites to activate peroxymonosulfate (PMS). When treating the solution containing sulfamethoxazole (SMX), no SMX residues were detected in the remaining bulk water (up to 100% SMX degradation efficiency within 60 min), demonstrating that reactive oxygen species (ROS) were generated to attack SMX in the source water. The bifunctional evaporator successfully combined SISG and advanced oxidation processes (AOPs), providing an ingenious strategy for solving the problem of wastewater enrichment during SISG.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
Journal of Materials Chemistry A
·
2021
·Vol. 9
·期 11
·7248-7256
·
IF 12.732
Peijia Wang,Jiajie Huang,Jing Zhang,Liang Wang,Peiheng Sun,Yefeng Yang,Zhujun Yao
Transition metal selenides have emerged as a class of promising anodes for sodium ion batteries (SIBs). However, the notorious issues of their low electrical conductivity and huge volume changes during sodium ion insertion/extraction lead to poor cycling stability and inferior rate capability. In this work, hierarchically core–branched iron cobalt selenide arrays coated with N-doped carbon shell (denoted as FeCo–Se@NC) were rationally designed and synthesized on carbon cloth through a combined strategy of hydrothermal, selenization and carbonization processes. Benefitting from the designed arrays with simultaneous Fe doping into the CoSe2 matrix and N-doped carbon coating, the optimized FeCo–Se@NC electrode possesses greatly enhanced structural integrity and accelerated ion/electron transfer kinetics. When employed as a binder- and additive-free anode for SIBs, the FeCo–Se@NC electrode exhibits a high reversible capacity of 532.1 mA h g−1 at 0.05 A g−1, competitive rate capability (193.3 mA h g−1 at 5 A g−1), and good cycling stability (386.1 mA h g−1 after 150 cycles at 0.5 A g−1). Moreover, when coupled with Na3V2(PO4)3/C, the full cell delivers a high capacity of 350.6 mA h g−1 at 0.1 A g−1 and a high energy density of 276.7 W h kg−1. This work is expected to provide a new avenue for the development of arrayed transition metal selenide-based materials for high-performance SIBs.
✓ 已验证
产品关联
DOI
高影响因子
INDUSTRIAL & ENGINEERING CHEMISTRY RESEARCH
·
2021
·
IF 3.764
Jingwei Wu,Man Qi,Gökalp Gözaydın,Ning Yan,Yongjun Gao,Xi Chen
Chitin is an abundant and sustainable biomass from oceanic waste. Herein, a simple, mild, and effective method was developed to convert chitin biomass into valuable organic acids at room temperature using a common base and oxidant in water. In dilute sodium hydroxide (NaOH) solution, ∼72.3% yield of organic acid products including acetic acid (AA), formic acid (FA), glyceric acid (GlyA), and so forth was obtained from the chitin monomer N-acetyl-d-glucosamine under ambient air. Meanwhile, tunable product selectivity can be achieved by employing different oxidative reagents. FA was predominantly formed in 57.1% yield using hydrogen peroxide (H2O2), while AA and GlyA were the major products in 41.2% yield with oxygen (O2) gas. Divergent reaction pathways were presumably involved when using different oxidants. Compared to the conventional methods at high temperatures and/or pressures, the established approach requires minimal energy inputs, inexpensive equipment with reduced carbon emission, capital costs, and safety risks.
✓ 已验证
产品关联
DOI
高影响因子
CATALYSIS LETTERS
·
2021
·Vol. 151
·期 12
·3664-3674
·
IF 3.186
Chen Jie,Qiao Luyang,Zhou Zhangfeng,Wu Xiaoman,Guo Xiaxin,Zong Shanshan,Ding Yifan,He Yuntao,Yao Yuangen
The influence of surface modification of SiO 2 carrier by grafting method and its effects for Rh supporting was investigated on formaldehyde hydroformylation reaction. The relationship between the structure of catalysts and their performance was characterized in detail by X-ray diffraction, N 2 adsorption–desorption, temperature programmed reduction with H 2 , X-ray photoelectron spectroscopy, and in situ infrared. After grafting the amino organic functional group, the surface circumstance of SiO 2 was altered, and moreover, sites available for metal loading was enriched on the carrier that distribute a high dispersion of Rh species Under the same Rh loading, the Rh@N–SiO 2 catalyst exhibits better catalytic activity than pristine SiO 2 supported Rh catalysts. Spectroscopic evidences suggest the presence of an electronic perturbation between Rh and modified SiO 2 which promotes the hydroformylation of formaldehyde by maintaining Rh at proper Rh 0 /(Rh 3+ + Rh δ+ ) ratio. Graphic Abstract Diagram of the effect of surface modified with amino group on metal rhodium loading.
✓ 已验证
产品关联
DOI
高影响因子
ChemCatChem
·
2021
·Vol. 13
·期 11
·2683-2690
·
IF 5.686
Xinxin Jin,Yan Xie,Junhong Fu,Chaoyue Zhao,Yinghao Xu,Yang Lv,Bingsen Zhang,Keju Sun,Rui Si,Jiahui Huang
Graphical ORR : We fabricated a FeSA/HNPC electrocatalyst with well atomically dispersed FeN 4 species. DFT calculations uncovered that the single-atomic FeN 4 sites within FeSA/HNPC electrocatalyst present in the configurations of pyrrole-N 4 −Fe are more favorable than those of pyridine-N 4 −Fe for boosting ORR performances. Atomically dispersed Fe−N−C electrocatalysts have displayed excellent catalytic performances towards the oxygen reduction reaction (ORR), while the identification of the genuine active sites remains a challenge. Herein, we report a Fe−N−C electrocatalyst of FeSA/HNPC featuring single-atomic FeN 4 sites on hierarchically N-doped porous carbon (HNPC), which shows a very competitive ORR activity in alkaline solution even at a low electrocatalyst loading of 0.2 mg cm −2 on the working electrode. A comparison of energy barriers in ORR reveals that the single-atomic FeN 4 active sites in FeSA/HNPC existing in the form of pyrrole-N 4 −Fe is more favorable than that of pyridine-N 4 −Fe for the enhanced ORR activity. Understanding the nature of FeN 4 active sites will greatly benefit the design of Fe−N−C electrocatalysts with highly effective ORR performances.
✓ 已验证
产品关联
DOI
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2021
·
IF 5.816
Rongcheng Mo,Xiaoran Zhang,Zhenyu Chen,Shangli Huang,Yanjie Li,Lizhe Liang,Zhi Qun Tian,Pei Kang Shen
Developing platinum-based nanoparticles on carbon catalysts with high activity and stability for oxygen reduction reaction (ORR) is of great significance for the practical application of fuel cells. Herein, a synchronous strategy of preparing nano-sized PtCo supported on atomic Co and N co-doped carbon nanorods (PtCo/Co–N–C NR) was developed to replace the conventional method of impregnating Pt sources into ready-made carbon materials , in which metal-organic frameworks (MOFs) with Co and Zn ions of rhombic dodecahedron were first prepared using 2-methylimidazole as building block and then their morphology was transformed into porous nanorods via the reduction of Co ions to Co–B–O complex in the MOFs by NaBH 4 ; subsequently, Pt was deposited on the Co–Zn MOF nanorods through the displacement reaction of PtCl 6 2 - and metallic Co and coordination between MOF and PtCl 6 2 - ; after pyrolysis and acid-leaching process, highly dispersed PtCo/Co–N–C NR was obtained. Attributed to its unique characteristics of hierarchical pore structure , uniform PtCo alloy nanoparticles with the average size of 7.0 nm and strong supporting interaction effect, the catalyst exhibits high ORR activity and stability with the mass activity of 577.0 mA mg −1 Pt and specific activity of 1.4 mA cm −2 at 0.9 V vs RHE in 0.1 M HClO 4 , which is about 3.6 times and 3.5 times high than that of commercial Pt/C catalyst respectively. This strategy would provide a flexible route to develop highly active and stable ORR electrocatalysts with various morphologies for optimizing the exposure of active sites.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2021
·
IF 5.316
Honglu Wu,Zenghui Qiu
Fe 3 O 4 particles are designed to originate reversible faradaic process and carbon material with a rice-like shape and meso-pore dominated structure is designed to encapsulate the Fe 3 O 4 particles. Synthesized carbon nano rice wrapped Fe 3 O 4 are uniformly anchored on the surface of reduced graphene oxide (rGO) nano sheets in a one-pot facile hydrothermal procedure. A significant amount (13.28 at%) of N is also doped into the carbon nano rice in the hydrothermal process, simultaneously. The synthesized Fe 3 O 4 @N-Carbon nano rice/rGO (Fe 3 O 4 @N-PCNR/rGO) delivers a high capacity of 495 Cg -1 at a current density of 1 Ag -1 and high long-term stability of 70% after 1000 charge-discharge cycles at 10 Ag -1 . The Fe 3 O 4 @N-Carbon/rGO is utilized as a positive electrode, and synthesized 3D rGO aerogel is employed as a negative electrode to fabricate a supercapattery, which exhibits a wide operating potential window of 1.5 V, a high energy density of 46 W h kg -1 at 750 W kg -1 , and even 10 W h kg -1 at an elevated power density of 7500 W kg -1 . The supercapattery also performs well in terms of long-life stability with 80% of capacitance retention after 10,000 charge-discharge cycles at 10 Ag -1 .
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2021
·
IF 5.316
Deying Leng,Houbing Tang,Mingming Yang,Jinniu Zhang,Yafeng Zhang,Juan Qin,Qianru Liu,Hongbing Lu,Feng Yin
The development of high performance and low-cost non-precious metal catalysts (NPMCs) for the oxygen reduction reaction (ORR) to replace platinum-based catalysts is significant in facilitating the commercialization of proton exchange membrance fuel cells (PEMFCs). In this work, a low-cost and effective approach is employed for producing Co/N-doped carbon nanotubes/porous carbon sheets (Co/N-CNT/PCS) catalysts by one-pot annealing of Co salt, melamine and polyvinylpyrrolidone (PVP). The prepared catalysts exhibit a N-doped carbon nanotubes-grafted porous carbon sheets structure, in which Co nanoparticles (Co NPs) encapsulated in bamboo-like CNTs. When compared with a commercial platinum carbon (Pt/C) catalyst in an alkaline solution, one such catalyst (Co/N-CNT/PCS800) displays comparable ORR electrocatalytic activity as well as improved long-team stability and methanol tolerance, arising from the combined effect of high specific surface area, large pore volume and the cooperation of pyridinic-N and graphitic-N. Moreover, given the scalability and economy of this synthesis, Co/N-CNT/PCS catalysts produced in this way are likely to emerge as a major contender as an ORR catalysts in PEMFCs.
✓ 已验证
产品关联
DOI
高影响因子
ACS Applied Energy Materials
·
2021
·
IF 6.024
Qiao He,Qingyun Wu,Xuxu Wang,Shuting Fu,Senchuan Huang,Shengfu Tong,Yangfei Cao,Zheng Liu,Mingmei Wu
Silicon is one of the most promising candidates for anode materials for next-generation lithium-ion batteries due to its high theoretical capacity. However, the catastrophic volume change upon lithiation/delithiation and the subsequent pulverization result in poor electrochemical performance and hinder its applications. To address this issue, a Si@N,S-doped carbon core–shell structure (Si@NSC) is proposed in this work. The composites are prepared by in situ polymerization and pyrolysis. The as-prepared Si@NSC electrode exhibits a stable capacity of 1720 mAh g–1 at 0.3 A g–1 after 550 cycles with a capacity retention of 90.2%. Compared with commercial silicon and a mixture of Si and C, Si@NSC demonstrates high initial efficiency and superior cyclic stability owing to its unique structure and moderate Si/C ratio. The Si@NSC composites shed light on the application of Si-based anode materials for high-capacity lithium storage.
✓ 已验证
产品关联
DOI
高影响因子