POLYMERS FOR ADVANCED TECHNOLOGIES
·
2021
·Vol. 32
·期 9
·3804-3816
·
IF 3.665
Yishen Chen,Jiaxin Li,Xuejun Lai,Hongqiang Li,Xingrong Zeng
High-efficiency macromolecular intumescent flame retardant (MIFR) is urgently demanded but of great challenge. In this work, a novel N -alkoxyamine-containing MIFR-decorated zirconium phosphate (ZrP) nanosheet (denoted as RQMIFR-ZrP) was synthesized and combined with ammonium polyphosphate (APP) to endowed polypropylene (PP) with excellent flame retardancy. With the addition of 6.3 wt% RQMIFR-ZrP and 18.7 wt% APP, PP classed a UL-94 V-0 rating with a high LOI value of 39.5%. Moreover, the peak heat release rate, the total heat release, the peak of CO production, and the peak of CO 2 production of PP/RQMIFR-ZrP/APP decreased by 94.0%, 83.2%, 91.3%, and 91.7%, respectively. It revealed that RQMIFR-ZrP not only generated nitroxyl radicals (NO•) to suppress the chain degradation of PP but also promoted to form high-quality intumescent char layers with the catalytic carbonization and layered barrier effect of ZrP nanosheet, which effectively prevented PP from burning. This work provides a new approach to preparing high-performance flame-retardant polymer.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF ALLOYS AND COMPOUNDS
·
2021
·
IF 5.316
Yuxiao Gong,Lian-Hua Xu,Junji Li,Dan Shan
Research of highly dispersed transition metal phosphides (TMPs)-based catalysts for electrocatalytic hydrogen evolution is of great significance in the area of renewable energy. Herein, the high dispersion of FeNiP nanoparticles on N, P-doped electrospun carbon fibers was realized via the confinement effect induced by phytic acid (PA) and polyacrylonitrile (PAN), as well as electrospinning technique. PA and PAN were used as ligand for coordinating transition metal (TM) ions and carbon sources, respectively. In addition, the nucleophilic addition reaction between PA and PAN resulted in the cyclization of PAN and the further formation of a supramolecular network. Besides, the chelating ability of PA to TM ions was also modulated. Benefitting from the confinement effect, the optimized FeNiP/NPC800 exhibit good hydrogen evolution reaction (HER) activities for achieving a current density of 10 mA cm −2 at an overpotential of 277 mV in 0.5 M H 2 SO 4 .
✓ 已验证
产品关联
DOI
高影响因子
Journal of Materials Chemistry A
·
2021
·Vol. 9
·期 8
·5086-5096
·
IF 12.732
Dawei Liu,Yunchen Du,Ping Xu,Fengyuan Wang,Yahui Wang,Liru Cui,Honghong Zhao,Xijiang Han
Hierarchical microstructures are playing important roles in the design and fabrication of high-performance microwave absorbing materials (MAMs) owing to their unique advantages. In this work, a series of special “double-hierarchical” N-doped carbon nanotubes wrapping waxberry-like Ni@C microspheres (NC@NCNTs) have been rationally designed and successfully fabricated by two-step pyrolysis processes, where the loading amount of NCNTs on the waxberry-like Ni@C microspheres can be easily modulated by changing the dosage of melamine. Benefiting from sufficient attenuation ability and good impedance matching, NC@NCNTs-2, whose relative carbon content is 51.1 wt%, exhibits the best reflection loss (RL) characteristics among this series of composites, including the minimum RL intensity of −41.5 dB and an effective absorption bandwidth of 5.2 GHz with an absorber thickness of only 1.7 mm. This performance is superior to that of many homologous Ni/C composites reported previously. The investigation on EM properties indicates that the unique “double-hierarchical” architecture of NC@NCNTs can not only create stronger dipole orientation and interfacial polarization relaxation, but can also result in higher conductive loss as well as extra multiple reflection effects for incident electromagnetic waves. We believe that these results will provide some inspirations and pathways for the production of high-performance MAMs with senior microstructures in the future.
✓ 已验证
产品关联
DOI
高影响因子
JOURNAL OF CHROMATOGRAPHY A
·
2020
·
IF 4.049
Di Zhou,Qiurong Luo,Qin Zeng,Yunchao Zheng,Xiujun Ren,Die Gao,Qifeng Fu,Kailian Zhang,Zhining Xia,Lujun Wang
A novel stationary phase co-modified with N -isopropyl acrylamide (NIPAM) and 3-aminophenylboronic acid copolymer on the silica was synthesized through atom transfer radical polymerization (ATRP) reaction for performing mixed-mode and boronate affinity chromatography. The prepared functionalized silica was characterized using Fourier transform infrared spectrometry (FT-IR), elemental analysis (EA) and thermogravimetric analysis (TGA), scanning electron micrographs (SEM) and Brunauer-Emmett-Teller (BET) measurements. The prepared column named Sil-PBA-NIPAM showed great separation performance for hydrophobic, hydrophilic, positional isomer, acidic and alkaline compounds. Besides, the mixture of cis -diol and non- cis -diol compounds was used to prove that the developed column also has potential to capture and enrich cis -diol compounds. The prepared column possesses merits of time-saving, high selectivity to cis-diol compounds and molecular-planarity selectivity compared with two commercial single-mode columns. The theoretical plates of material can reach to 57472 and the column has good hydrolysis stability and batch-to-batch reproducibility. In summary, the prepared column possesses good hydrophilicity, hydrophobicity, molecular-planarity selectivity and boronate affinity abilities for the analysis of various compounds.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
ACTA OECOLOGICA-INTERNATIONAL JOURNAL OF ECOLOGY
·
2020
·
IF 1.22
Shu Wang,Mei Wei,Bingde Wu,Huiyuan Cheng,Kun Jiang,Congyan Wang
Large amounts of nitrogen (N) enter ecosystems via N deposition. The increased drought stress has incurred serious threats to plant seed germination and seedling growth (SGe-SGr). It is significant to characterize the combined impacts of N deposition and drought stress on SGe-SGr of plants to enable a further explanation of the response mechanism of SGe-SGr to N deposition and drought stress. This study aims to explore the combined impacts of N deposition with a concentration gradient and drought stress (mimicked using PEG 6000) with different levels on SGe-SGr of wheat. N treatment raises seedling growth of wheat mainly due to the increased levels of available N and the decreased level of peroxidation of the cell cytoplasm membrane of wheat. Drought stress declines SGe-SGr of wheat mostly due to the progressively enlarged osmotic pressure triggered by water deficit and the advanced level of peroxidation of the cell cytoplasm membrane of wheat. N treatment regardless of the concentration dramatically mitigates the adverse impacts of drought stress on seedling growth of wheat. This may be owed to the improved competitive ability for sunlight acquisition and leaf photosynthetic area via the deactivation of nutrition limits (wheat can absorb more N nutrients and improve its drought resistance ability) implemented by N addition. This may also due to the down-regulated level of peroxidation of the cell cytoplasm membrane of wheat under the combined N and drought stress. However, the combined treatments of the high level of N supply and light drought stress decline seed germination of wheat. This may be due to the promoted osmotic pressure contributed by the high level of N supply under water deficit. Thus, N deposition mitigates the adverse impacts of drought stress on seedling growth of wheat but aggravates the adverse impacts of drought stress on seed germination of wheat mostly.
✓ 已验证
产品关联
DOI
高影响因子
CELLULOSE
·
2021
·Vol. 28
·期 3
·1781-1793
·
IF 5.044
Chen Yu,Wan Caiyan,Liu Shidong,Wang Peng,Zhang Guangxian
Abstract A novel flame retardant with high P content and multi-reactive ammonium phosphorus acid groups Bis(2-hydroxyethyl) imino tris-(hydroxymethyl)-methane methylphosphonic acid (ABTMPA) was synthesized for treatment of cotton fabrics. The ABTMPA treated cotton fabrics were characterized by scanning electron microscopy, X-ray photoelectron spectroscopy, X-ray diffraction and fourier transform infrared spectroscopy (FTIR). The structure of the ABTMPA was analyzed by the nuclear magnetic resonance. The limiting oxygen index (LOI) was used to evaluate the flame retardancy and durability of the treated cotton fabrics. The LOI value of cotton fabric treated with 31% ABTMPA was 50.2%, and an LOI of 41.2% was retained after 50 laundering cycles. Micro-burning calorimetry showed that total heat of combustion of the treated cotton fabric was reduced, and the char residual was much higher than that of pure cotton. Thermogravimetric (TG) and TG-FTIR analyses indicated that the flame retardant ABTMPA changed the thermal decomposition pathway of cellulose, and the combustible gases generated at high temperature was much lower than that of pure cotton. Flame retardant treated cotton fabric had excellent flame retardancy and durability. In addition, whiteness and breaking strength are well maintained. Therefore the ABTMPA shows the potential of flame retardants in future commercial applications. Graphic abstract
✓ 已验证
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2020
·
IF 7.489
Yafei Sang,Yiwen Cao,Lizhi Wang,Wei Yan,Tianwen Chen,Jianhan Huang,You-Nian Liu
Due to the p-π conjugative effect between the nitrogen atom of the amide and the carbonyl, the amide carbonyl has much low reactivity and the Schiff base reaction between the amide and amine usually did not take place, but after the amide was polymerized, it's quite different. Herein, benzene-1,3,5-triyltris((9H-carbazol-9-yl) methanone) (HTCZ) is not able to have the Schiff base reaction with melamine . Surprisingly, after HTCZ was polymerized according to the Friedel-Crafts reaction, the resultant polymer PHTCZ-1 performed the Schiff base reaction with melamine successfully, and a kind of novel N-rich porous organic polymers , namely, PHTCZ-1-MA was successfully synthesized. Moreover, PHTCZ-1-MA owned much higher Brunauer-Emmett-Teller surface area (613 m 2 ·g −1 ) and pore volume (0.57 cm 3 ·g −1 ) with very high nitrogen content (42.39 wt%). The theoretical calculation showed that the positive charge of the carbonyl carbon increased by 18% after the polymerization, which greatly improved the reactivity of the carbonyl. Because of this amazing change, PHTCZ-1-MA was proven to be an excellent adsorbent for CO 2 capture (180 mg·g −1 at 273 K and 1.0 bar) and mercury(II) adsorption (335 mg·g −1 at 273 K). This study makes the impossibility possible and provides a unique synthesis strategy for the fabrication of a kind of N-rich porous organic polymers.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2020
·
IF 10.652
Xianhua Mao,Ziyu Li,Yijia Liu,Xiuxiu Nie,Benzhang Li,Qinglin Jiang,Chunmei Gao,Yuan Gao,Lei Wang
Recently, single-walled carbon nanotubes (SWCNTs)-based thermoelectric (TE) materials have received much interest owing to their advantages, such as high electrical conductivity and flexibility, as well as their ability to be easily tuned to exhibit p-type or n-type characteristics by the addition of redox reagents. Compared with the numerous p-type composites, less n-type agents have been reported. Borane-nitrogen derivatives (BNs) have been widely used as reducing agents; however, little attention has been paid on their TE performance. As the reducing ability of BNs can be tuned by the basicity and steric hindrance of the nitrogen containing derivatives, herein, pyridineborane (PYB), morpholineborane (MPB) and N , N -diethylanilineborane (DEANB) were investigated as n-type dopants of SWCNTs by simply dispersing each of them with SWCNTs in various solvents. The results suggested the structures of the borane complexes and their reducing ability affect the TE properties greatly. Among them, SWCNT/PYB displayed the best performance at all the investigated temperatures, with power factors ranging from 193.6 μW m −1 K −2 to 223.8 μW m −1 K −2 , which are the highest PF values reported to date based on boron containing SWCNT composites. In addition, the TE devices containing five p-n junctions were also combined. SWCNT/PYB exhibited a higher open-circuit voltage (28.8 mV) and output power (1.15 μW) than SWCNT/NaBH 4 (23.7 mV, 0.79 μW) at the same conditions. Our results suggest that organic boron compounds can be developed as good agents for boosting the performance of n-type TE materials.
✓ 已验证
产品关联
DOI
高影响因子
ChemNanoMat
·
2021
·Vol. 7
·期 2
·200-206
·
IF 3.154
Shuyu Zhou,Jianbing Zang,Wei Li,Pengfei Tian,Hongwei Gao,Shiwei Song,Xueqing Tian,Yanhui Wang
Graphical An in-situ derivatization-based nano-boron carbide strategy was proposed to produce B, N co-doped carbon electrocatalysts for oxygen reduction reaction. This strategy can produce B- and N-doped active sites while avoiding formation of B−N bonds, allowing electrocatalysts to exhibit excellent catalytic activities comparable to commercial Pt/C and better stability. Heteroatom-doped metal free carbon materials, especially boron and nitrogen co-doped carbons have been widely researched as promising oxygen reduction electrocatalysts because of their low cost, high activity and environmental friendliness. However, B, N-doped carbon electrocatalysts are usually prepared at high temperature and accompanied by the formation of B−N bonds resulting in the inactivation of the active sites. This paper proposed a strategy for synthesizing B and N co-doped carbons for oxygen reduction reaction in-situ derived from nano-boron carbide by one-step heat treatment at low temperature. This strategy can produce B- and N-doped active sites while avoiding formation of B−N bonds, allowing electrocatalysts to exhibit excellent catalytic activities ( E onset =0.93 V, E 1/2 =0.79 V) and better stability (current density remained 93.3% after 12,000 s) comparable to commercial Pt/C (20 wt%). New ideas were provided by this work to massively produce the B and N co-doped carbon electrocatalysts candidates for ORR.
✓ 已验证
产品关联
DOI
高影响因子
SPECTROCHIMICA ACTA PART A-MOLECULAR AND BIOMOLECULAR SPECTROSCOPY
·
2020
·
IF 3.232
Tong-Yang Shen,Pei-Yun Jia,Da-Shu Chen,Li-Na Wang
Carbon quantum dots (CQDs), owing to their characteristic luminescent properties, have become a new favorite in the field of luminescence. They have been widely used in light emitting diode, ion detection, cell-imaging, ect. Herein a facile synthesis method of nitrogen-doped carbon quantum dots (N-CQDs) has been developed via a one-step hydrothermal of glucose and m -phenylenediamine. The chemical composition, surface functional groups, and crystal structure of so prepared N-CQDs were systematically characterized. The characterizations indicate that nitrogen has been chemically doped in the CQDs and the N-CQDs crystallize in a graphene structure. Photoluminescence (PL) measurements show that the N-CQDs emit strong blue emission under the irradiation of ultraviolet. The emission is excitation-dependent, is resistant to photo bleaching and high ionic strength, and slightly decreases with the increase of temperature. The quantum yield of them is about 17.5%. The PL intensity of N-CQDs quenches linearly with the increase of the concentrations of Fe 3+ (0.5–1.0 mM) and CrO 4 2− (0.3–0.6 mM), which are a kind of excellent fluorescent probe for the detection of Fe 3+ and CrO 4 2− . The quenching mechanism of Fe 3+ and CrO 4 2− is verified to be a static quenching mechanism based on inner filter effect. The N-CQDs are also found to be a good cell-imaging reagent of Hela cells.
✓ 已验证
产品关联
DOI
PubMed
高影响因子
CARBON
·
2020
·
IF 8.821
Jintao Zhang,Tong Zhang,Jing Ma,Zhi Wang,Junhao Liu,Xuzhong Gong
Two-step carbonization method was reported to synthesize Co–N doped coal tar pitch (CTP) carbon-based electrocatalysts with hierarchical pore structure , high local order degree and efficient Co-N x active structure simultaneously. The synergistic effect of the carbon substrate with highly ordered structure and the Co-N x active sites realized the “Point discharge effect”. The π-π interactions from the CTP aromatic ring sheets and Co-N x promoted the adsorption and dissociation of oxygen molecules, respectively. The increased diffusion coefficient ( D 0 ) indicated the mass transfer of oxygen molecules in the boundary layer was enhanced during the ORR process. Thanks to excellent structural characteristics, ACTP 5 @Co,N-800 exhibited better ORR performance than commercial Pt/C catalyst under alkaline conditions, and the OER activity was improved simultaneously. This work demonstrated a simple and practical strategy for the development of advanced carbon-based electrocatalysts, and also provided novel insights from kinetics perspectives for improving electrocatalytic efficiency.
✓ 已验证
产品关联
DOI
高影响因子
CHEMICAL ENGINEERING JOURNAL
·
2020
·
IF 10.652
Gaobo Lou,Gu Pei,Yitian Wu,Yingzhuo Lu,Yatao Wu,Xinqiang Zhu,Yajun Pang,Zhehong Shen,Qiang Wu,Shenyuan Fu,Hao Chen
Low-cost, high-performance, and long-life cathode materials are highly desired for zinc ion hybrid supercapacitors (ZHSs). Here, an N, O co-doped two-dimensional (2D) carbon nanosheet material is successfully fabricated via a one-step combustion conversion of wood for the excellent usage as the cathode material in zinc-ion hybrid supercapacitors. This novel combustion conversion synthesis with Zn(NO 3 ) 2 ·6H 2 O as oxidizer and urea as fuel can easily achieve the carbonization, pore-forming, and heteroatom doping within a one-step process. More interestingly, the resulting N, O co-doped porous carbon owns relatively uniform 2D sheet structure and very high specific surface area (1248 m 2 g −1 ), which can not only provide short electric/ionic transfer path plus optimized wettability and conductivity for high power output, but also offer abundant interfacial active sites as well as improved ion adsorption capacity for high energy storage. Benefiting from these advantages, the ZHS based on this N, O co-doped 2D carbon nanosheets exhibits a superior specific capacity of 111.0 mAh g −1 at 0.1 A g −1 , high rate capability of 57.6% capacity retention at a 30-fold higher current, and attractive energy density of 109.5 Wh kg −1 at 225 W kg −1 . More gratifyingly, it displays ultralong cycling life with 92.7% capacity reservation after 50,000 charge and discharge cycles. Moreover, a quasi-solid ZHS with N, O co-doped 2D carbon nanosheets coated on the carbon cloth as the cathode also displays satisfactory specific capacity (34.6 mAh g −1 ), impressive energy density (27.7 Wh kg −1 ), and nice flexibility.
✓ 已验证
产品关联
DOI
高影响因子