文献检索

查找使用阿拉丁产品的科研文献

检索与阿拉丁产品相关的同行评审论文、DOI、PubMed 编号、期刊、作者、CAS 号及研究领域。

科研影响力快照

与阿拉丁产品相关的已发表科研成果

在搜索之前,这些指标可帮助访客快速了解产品关联科研的规模与质量。

347,389+ SCI 论文 与阿拉丁产品引用相关
2,303,681.05 总影响因子 匹配文献记录中影响因子的总和
81.20 最高期刊影响因子 匹配期刊中的最高 IF
6.63 平均期刊影响因子 匹配文献的平均 IF

参考指标 指标基于阿拉丁文献引用数据库及期刊影响因子记录。文献关联仅供科研参考,请以原始文献为准。

产品列表

视图 列表 网格

显示第3577至3588个,产品总数4,488个

切换升序
Cu
BIORESOURCE TECHNOLOGY · 2026 · IF 8.2

Valorization of N-doped biochar into Fe-Cu loaded carbon catalyst from electroplating wastewater: Structure regulation, adsorption performance, and catalytic properties

Fangfang Ye,Xiaoying Jin,Jiajiang Lin,Zuliang Chen

A nitrogen-doped and CaO-activated pinewood biochar ( N -aPBC) was synthesized. • Closed-loop recycling strategy enables electroplating wastewater treatment. • N -aPBC achieves high Fe 3 ⁺/Cu2⁺ adsorption capacities of 287.40/61.88 mg g⁻1. • N/O functionalities and defects promote Fe 3 ⁺/Cu2⁺ uptake via surface interactions. • Spent adsorbent-derived Fe-Cu-NaB removes 93.64% CIP from swine effluent. The efficient removal and resource recovery of high-concentration heavy metals like Fe 3 ⁺ and Cu 2 ⁺ from electroplating wastewater remains a critical challenge. Herein, a sustainable closed-loop “adsorption-transformation-upcycling” strategy was proposed. Initially, a nitrogen-doped and CaO-activated pinewood biochar ( N -aPBC) was synthesized via synergistic modification. Systematic characterization revealed that N -aPBC features a high specific surface area (188.79 m 2 g⁻ 1 ), a hierarchical porous architecture, and abundant nitrogen-containing functionalities. Adsorption experiments demonstrated superior performance for Fe 3 ⁺ and Cu 2 ⁺, yielding maximum capacities of 287.40 and 61.88 mg g⁻ 1 , respectively. Mechanistic investigations indicated that the adsorption followed the pseudo-second-order kinetic model and Langmuir isotherm, suggesting monolayer chemisorption. The primary removal mechanisms involved surface complexation via N/O-functional groups, coupled with electrostatic attraction and ion exchange. N species and defects tuned surface polarity and electronic structure. Subsequently, the spent adsorbent was calcined to produce a functional material (Fe-Cu-NaB). Electrochemical analyses confirmed that Fe-Cu-NaB exhibited lower charge transfer resistance and enhanced electrocatalytic activity. Notably, Fe-Cu-NaB enhanced the oxidative degradation capacity, achieving high removal rates of 93.64% for ciprofloxacin (CIP) and 65.88% for total organic carbon (TOC) in swine wastewater. This work provides a high-performance adsorbent for heavy metal remediation and establishes a viable pathway for the high-value reutilization of spent adsorbents as efficient catalytic materials. Download: Download high-res image (142KB) Download: Download full-size image

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS · 2026 · IF 5.4

Enhancing persulfate activation with combined Fe(Ⅱ) and Cu(Ⅱ) catalysts to generate sulfate radicals for the rapid oxidation of galena

Qinbo Cao,Xingguo Huang,Li Guo,Haohua Qin,Lingpan Du,Menglai Wang,Dianwen Liu,Peilun Shen

PS/Fe 2+ /Cu 2+ reagents inhibited PbS flotation with 30   s of reaction. • Cu 2+ raised the SO 4 • − yield in the PS/Fe 2+ /Cu 2+ solution. • SO 4 • − oxidized the PbS surface, producing PbO and SO 4 2− . • Cu 2+ raised the Fe 3+ concentration in solution and improved the Fe 2+ /Fe 3+ cycle. Galena (PbS) depression in PbS–chalcopyrite (CuFeS 2 ) mixture via SO 4 • − radicals generated from persulfate (PS)/Fe 2+ typically requires a high PS concentration (0.15   mol/L) and a prolonged reaction time (10   min). This study employed a combined Cu 2+ /Fe 2+ catalyst to enhance SO 4 • − generation at a lower PS concentration. Flotation tests were conducted to determine optimal PbS treatment conditions using the PS/Fe 2+ /Cu 2+ system. The results showed that effective PbS depression was achieved with a PS concentration of 6.5 × 10 −3 mol/L and a reaction time of only 30   s. The synergistic role of Cu 2+ was investigated using surface analyses, including contact angle tests, XPS, Raman and UV-visible spectra. Contact angle measurements revealed that after 30   s of treatment, the PbS surface angle decreased to 38.2°, whereas the CuFeS 2 surface remained hydrophobic. Oxidation products, including PbO and SO 4 2− , formed on the PbS surface. SO 4 • − and •OH both existed in the system to react with the PbS surface, and SO 4 • − was the major radical species as indicated by the radical quenching tests. UV–visible spectrum results implied that Cu 2+ increased the equilibrium Fe 3+ concentration, thereby facilitating the Fe 2+ /Fe 3+ cycle and sustaining PS activation. The rapid oxidation capacity of the PS/Fe 2+ /Cu 2+ system demonstrates strong potential for industrial application. Download: Download high-res image (202KB) Download: Download full-size image

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
FOOD RESEARCH INTERNATIONAL · 2026 · IF 8.8

A smartphone-integrated Pt@Cu-HCF nanozyme-based paper sensor for on-site determination of total antioxidant capacity in marine oils

Mengqi Yu,Hong Chen,Yuyang Zhang,Shutong Zhang,Jiao Li,Jianan Sun,Sai Wang,Xiangzhao Mao

A Pt@Cu-HCF nanozyme with high oxidase-like activity was developed. • A paper-based sensor with the nanozyme was constructed for TAC detection. • Smartphone-based colorimetric analysis enabled rapid on-site TAC detection in marine oils. • The linear range of the sensor is 9.78–312.5 μM, with a LOD of 6.41 μM. • The sensor exhibits high sensitivity, selectivity, stability, and practical ability. Total antioxidant capacity (TAC) serves as a key indicator for evaluating the nutritional quality of foods. In this study, we designed a platinum-embedded copper hexacyanoferrate (denoted as Pt@Cu-HCF) nanozyme that exhibits high oxidase-like activity, efficiently catalyzing the oxidation of chromogenic substrates to generate robust colorimetric signals. Antioxidants quench hydroxyl radicals (∙OH) produced during the catalytic process, leading to a concentration-dependent suppression of the color signal. Leveraging this mechanism, a smartphone-integrated, colorimetric paper sensor for on-site TAC quantification was developed, using vitamin E as the calibration standard. The sensor was applied to determine TAC in fish oil, algal oil, and krill oil, demonstrating a linear response range of 9.78–312.5 μM and a limit of detection (LOD) of 6.41 μM. Validation using real-world marine oil samples showed excellent agreement with a commercial assay kit, confirming the reliability and practical applicability of this portable sensor for TAC measurement in complex biological matrices. Download: Download high-res image (189KB) Download: Download full-size image

CAS / MDL: 16941-12-1
✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
ANALYTICA CHIMICA ACTA · 2026 · IF 6.1

A chiral electrochemical sensor based on β-CD/Ce-doped Cu-MOF/MWCNTs-COOH for enantioselective recognition and detection of levofloxacin

Nanke Ma,Anqi Wei,Huiling Peng,Lixia Xie,Yuan Jin,Zhengzhi Yin,Guangli Li

Background Chirality plays a critical role in drug efficacy and environmental safety. The antibacterial activity of ofloxacin resides almost exclusively in its S-enantiomer (levofloxacin, LEV), while the R-enantiomer contributes little to therapeutic effects but may pose unnecessary risks. Rapid and reliable methods for enantioselective determination of ofloxacin enantiomers are therefore essential for pharmaceutical quality control, food safety monitoring, and environmental analysis. However, existing electrochemical sensors often suffer from limited enantioselectivity and insufficient sensitivity. To address this challenge, a novel enantioselective electrochemical platform is developed. Results A β-cyclodextrin/cerium-doped copper metal-organic framework/carboxylated multi-walled carbon nanotube composite (β-CD/Ce-doped Cu-MOF/MWCNTs-COOH) was fabricated on a glassy carbon electrode. The sensor achieves discrimination of ofloxacin enantiomers with an I L /I D ratio of 3.39. DFT calculations at pH 4.0 reveal that β-CD binds LEV with higher adsorption energy (−63.8 kJ/mol) than DEX (−58.3 kJ/mol), confirming the superior response for LEV originates from stereospecific inclusion. Quantitative analysis of LEV shows two linear ranges (0.03–1 μM and 1–10 μM) with a low detection limit of 0.01 μM. The sensor also enables accurate determination of LEV percentage in enantiomer mixtures across 0–100%. Excellent selectivity against common interferents, good reproducibility (RSD = 0.98%), repeatability (RSD = 1.26%), and long-term stability (95.2% retention after 21 days) are demonstrated. Practical applicability is validated by detecting LEV in commercial eye drops, honey, and tap water with satisfactory recoveries (96.0–108.0%). Significance and novelty This work presents the first application of Ce-doped Cu-MOF/β-CD/MWCNTs-COOH composites for the enantioselective electrochemical sensing of ofloxacin, a chiral fluoroquinolone antibiotic. The synergistic combination of high conductivity, abundant catalytic sites, and stereospecific host-guest recognition provides a generalizable strategy for high-performance enantioselective sensing, with promising applications in pharmaceutical, food, and environmental analysis.

✓ 已验证 产品关联 DOI 高影响因子
查看原文 查看 PubMed
COLLOIDS AND SURFACES A-PHYSICOCHEMICAL AND ENGINEERING ASPECTS · 2026 · IF 5.4

Neighboring Cu/Ni sites modulate interfacial electronic structure in ZIF-8-derived N-doped carbon for selective CO2-to-CO electroreduction

Yanjun Ye,Wenqi Feng,Hui Wang,Honghui Jiang,Juan Liu,Tongxiang Liang

Renewable-electricity-driven CO₂-to-CO electroreduction is a promising approach for sustainable carbon utilization, yet efficient CO production requires precise control of interfacial adsorption, proton-coupled electron transfer, and competing hydrogen evolution. Isolated metal centers are often constrained by linear scaling relationships, hindering the simultaneous optimization of CO₂ activation, *COOH formation, and suppression of the hydrogen evolution reaction. Herein, we report an N-doped carbon catalyst derived from zeolitic imidazolate framework-8, containing neighboring Cu/Ni sites that cooperatively regulate the CO₂-to-CO pathway. Aberration-corrected high-angle annular dark-field scanning transmission electron microscopy reveals atomically dispersed metal features and neighboring bright-spot configurations with a projected-separation distribution centered at approximately 2.35 Å, while localized electron energy-loss spectroscopy supports Cu/Ni coexistence within representative neighboring regions. The optimized catalyst achieves a CO Faradaic efficiency of approximately 99% at −0.70 V versus the reversible hydrogen electrode, with a corresponding CO partial current density of 31.78 mA cm⁻², and maintains stable operation for 52.3 h. Post-reaction scanning transmission electron microscopy and X-ray photoelectron spectroscopy further indicate that the atomically dispersed metal features and metal–N coordination environments are largely preserved after long-term electrolysis. Density functional theory calculations based on a representative adjacent Cu/Ni–Nₓ model show that the free-energy change for the potential-determining *COOH formation at the Ni-centered site is 1.08 eV. Electronic-structure analyses further suggest that neighboring Cu modulates the local electronic environment of Ni, contributing to site-differentiated interfacial reactivity. This work establishes a link between neighboring Cu/Ni sites, interfacial electronic modulation, and CO₂-to-CO performance, providing an interface-engineering strategy for selective CO₂ electroreduction. Download: Download high-res image (156KB) Download: Download full-size image

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
ACS Applied Materials & Interfaces · 2026 · IF 7.8

PEI-Induced Simultaneous Functionalization and Defect Engineering of RHO-Topology ZIF(Cu) for Enhanced CO2 Separation Performance in Mixed Matrix Membranes

Qin Zikang,Deng Min,Shi Long,Yao Lu,Yang Lin,Jiang Wenju,Zheng Junfeng,Dai Zhongde

Defect engineering and the functionalization of metal-organic frameworks (MOFs) are acknowledged as an effective method to boost the separation capability of mixed-matrix membranes (MMMs). However, these processes are often carried out separately, making it difficult to achieve both objectives simultaneously. Herein, a polyethyleneimine (PEI)-induced simultaneous functionalization and defect engineering strategy is proposed, in which PEI is introduced during the synthesis of RHO-topology ZIF(Cu) to in situ generate structural defects through competitive coordination with Cu 2+ centers. PEI enhanced the interfacial compatibility between the filler and the Pebax matrix through hydrogen-bonding interactions and introduced a facilitated transport effect. Meanwhile, defect engineering exposed additional Cu 2+ Lewis acid sites capable of adsorbing CO 2 and generated additional transport pathways. The synergy between amine functionalization and defect engineering resulted in a substantial enhancement in the separation performance of the MMMs. Under humid conditions, the MMM containing 5 wt % PEI-RHO ZIF(Cu) presented a CO 2 permeability of 188.1 Barrer and a CO 2 /N 2 separation factor of 73.0, representing increases of 95.10% and 78.14%, respectively, relative to Pebax, and surpassing the 2008 Robeson upper bound. This integrated strategy, combining defect engineering with amine functionalization, provides a promising avenue for the development of high-efficiency CO 2 capture MMMs.

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
ACS Applied Materials & Interfaces · 2026 · IF 7.8

Cu2Sb-Based CdTe Solar Cells: The Effects of Cu and Sb Dopants on Photoelectronic Performance and Long-Term Stability of Devices

Kanghui Zheng,Qianqian Song,Yueling Lai,Gang Wang,Lin Zheng,Ganhua Fu,Jingong Pan,Shou Peng,Yufeng Zhou,Ruilin Wang

Copper doping represents the most established technological process in the current manufacturing of CdTe solar cells and modules. However, its self-compensation effect and rapid diffusion at junction locations impose limitations on both the device efficiency and long-term stability. In this study, a Cu2Sb thin film with controllable composition and thickness was synthesized on the CdTe surface via a substitution reaction, serving as the p-type doping source for the device. Comparative investigations were conducted to evaluate the effects of pure Cu, pure Sb, and Cu–Sb alloyed dopants on the photoelectronic performance of CdTe-based thin-film solar cells. Although pure Sb dopants exhibit inferior performance and cannot replace Cu as the primary dopant, they serve effectively as auxiliary dopants. Incorporating Sb into the Cu doping process increases the concentration threshold for device doping, thereby enhancing the device’s overall doping concentration. The optimized device achieved a power conversion efficiency (PCE) exceeding 18%. Furthermore, appropriate Sb incorporation significantly improved device stability, maintaining 90% of the initial PCE after 50 days of normal operation. These results demonstrate that codoping with Cu and Sb via Cu2Sb provides a promising route for fabricating high-efficiency and highly stable CdTe thin-film solar cells and modules.

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
ACS Omega · 2026 · IF 5.2

Efficient Catalytic Ozonation of Dimethyl Carbonate on M-Mn (M = Cr, Cu, Co)/ZSM-5 Zeolites: Further Analysis of Reaction Mechanism

Yulin Sun,Yiwei Zhang,Yong He,Wubin Weng,Yanqun Zhu,Peixi Liu,Zhihua Wang

Mn-based catalysts usually exhibit considerable potential for enhancing the catalytic ozonation of volatile organic compounds (VOCs) at a lower temperature. In this study, bimetallic oxides M-Mn (M = Cr, Cu, Co) were supported on HZSM-5 zeolites to degrade dimethyl carbonate (DMC, chemical formula C3H6O3), a typical VOC emitted during the productive process of lithium batteries, with Mn/ZSM-5 for comparison. The Cr-doped catalyst CrMn/ZSM-5 could achieve 92% DMC conversion with 91% CO2 selectivity (O3/DMC = 6, T = 120 °C), showing an excellent catalytic performance among the prepared catalysts. The exceptionally low-temperature activity of CrMn/ZSM-5 was attributed to the synergistic effect of its large surface area, sufficient oxygen vacancies, and suitable acidity and reducibility, which collectively enhanced the level of O3 activation and accelerated DMC degradation. Furthermore, the catalyst demonstrated desirable stability and resistance to varying concentrations of water vapor. To elucidate the reaction pathway, in situ DRIFTS was employed to track the evolution of intermediate species during the adsorption and catalytic ozonation of DMC. With a further study of DFT calculation, the reaction mechanism of DMC catalytic ozonation on CrMn/ZSM-5 catalysts was put forward.

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
DESALINATION · 2026 · IF 9.9

Schiff Base functionalized CMC/PVA composites for efficient adsorption of Cu(II) and Zn(II): From molecular design to economic evaluation

Karim Youssef Nabat,Ali Raza Ayub,Ahmed E. Mansy,Tesfa Oluma Fufa,Niu Zhang,Xiyan Xu,Hansheng Li,Hui Li

Green CMC/PVA based Schiff base bio-composite material successfully Fabricated • CMC/PVA-LH35 composite achieved adsorption capacity of 532.15 mg/g for Cu(II) • CMC/PVA-LA35 composite achieved adsorption capacity of 516.49 mg/g for Zn(II) • High reusability after 6 cycles with low-cost adsorbents for desalination • DFT computational analysis to elucidate the structural and binding mechanism Metal contamination in water sources is a critical threat to human health and water ecosystems, which reduces the efficiency of water desalination. Therefore, the development of materials for metal removal is essential for water purification. In this study, two novel Schiff bases (LA35 and LH35) were immobilized in a carboxymethyl cellulose/polyvinyl alcohol (CMC/PVA) matrix via robust hydrogen bonding. The CMC/PVA-LA35 and CMC/PVA-LH35 composite adsorbents achieved a maximal adsorption of 474.38 mg/g and 532.15 mg/g for Cu(II) and 516.49 mg/g and 468.04 mg/g for Zn(II), respectively, at optimum conditions, pH 5, 318 K, and 300 mg/L. The data fit the Langmuir isotherm model, suggesting that adsorption occurred on a homogeneous mono-layer surface with uniform binding sites. Additionally, a thermodynamic analysis confirmed the reaction was both spontaneous and endothermic. After six cycles of adsorption/desorption, the CMC/PVA-LA35 and CMC/PVA-LH35 maintained outstanding reusability with efficiencies of 76.72% and 81.69% for Cu(II) and 71.33% and 67.32% for Zn(II), respectively. DFT calculations revealed effective metal-ligand interactions via charge transfer and reduced bandgap. These findings were consistent with the large experimental adsorption capacities and confirm the importance of chemisorption for Cu(II) and Zn(II) removal. These findings reveal that metal chelation strength and complexation control the adsorption process. The results of the cost-effectiveness analysis showed that the total cost of reusability was extremely low. This discovery unveils its potential use in water desalination, offering new bio-composites to decrease metal contamination and protect aquatic life. Download: Download high-res image (171KB) Download: Download full-size image

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
JOURNAL OF APPLIED POLYMER SCIENCE · 2026 · IF 3.1

Fabrication of a Recyclable Sodium Alginate-Zeolite/Glutaraldehyde (SA-HZ/GA) Composite Adsorption Membrane and Its Efficient Removal of Cu(II)

Lifeng Yang,Yirun Yang,Yi Zhu,Huajiang Zuo,Dongmei Deng

Cu(II) contamination in industrial wastewater constitutes a major challenge to global environmental management as traditional treatment methods are plagued by high energy consumption, secondary pollution risks, and substantial costs. A technical strategy was developed to prepare glutaraldehyde-crosslinked sodium alginate-zeolite (SA-HZ/GA) composite adsorption membranes via phase inversion. This approach leverages zeolites' structural reinforcement and mass transfer channel formation combined with glutaraldehyde's crosslinking properties to optimize material performance. SA-HZ/GA features abundant mesopores with sizes ranging from 2 to 16 nm and exhibits fracture strength over 74% higher than pure sodium alginate membranes. At pH 5 and 25°C, its Cu(II) adsorption capacity reaches 46.80 mg/g with over 80% removal efficiency maintained after 5 cycles with 0.1 M HCl as desorbent. The adsorption process fits the Langmuir model ( R 2 = 0.999) and follows pseudo-second-order kinetics, indicating monolayer chemical adsorption. Thermodynamic analysis revealed that the adsorption was spontaneous (Δ G = −12.5 kJ/mol) and endothermic (Δ H = 28.4 kJ/mol), with a positive entropy change (Δ S = 0.14 kJ/(mol·K)) suggesting increased randomness at the solid–liquid interface. This work provides an efficient, stable, and cost-effective engineering solution for heavy metal-laden wastewater treatment.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
ChemistrySelect · 2026 ·Vol. 11 ·期 20 ·e73532 · IF 2.3

Manganese Superoxide Dismutase Coordinating to Fe(II) and Cu(II): Efficient Hydroxyl Radical Generation for Degradation of Contaminants and Antibacterial Application

Siyu Mao,Yaqi Fu,Jiaxing Wei,Yichuan Wang,Wei Feng

Manganese superoxide dismutase (SOD) catalyzes the decomposition of hydrogen peroxide (H 2 O 2 ) to generate hydroxyl radicals (•OH). In this study, SOD was encapsulated via coordination with Cu(II), Fe(II), and phosphate in phosphate-buffered saline (PBS) to form a hybrid material denoted as SOD@Cu&Fe&PO 4 . Our study demonstrates that SOD and the coordinated Cu(II)/Fe(II) ions exert a synergistic catalytic effect on •OH generation during H 2 O 2 decomposition. This synergistic behavior stems from the dynamic interplay between the production and consumption of superoxide anion radicals (O 2 •− ). Specifically, O 2 •− is generated as an intermediate in the reactions of coordinated Cu(II) and Fe(II) with H 2 O 2 . The in situ generated O 2 •− is subsequently utilized by encapsulated SOD, which in turn reduces Mn 3 + at the enzyme's active site to Mn 2 + . A continuous supply of O 2 •− to SOD accelerates the Mn 3 + /Mn 2 + redox cycle at its active center. Concurrently, the timely removal of O 2 •− from the Cu(II)/Fe(II)–H 2 O 2 reaction system eliminates the potential inhibition of O 2 •− accumulation, thereby promoting the Fe(III)/Fe(II) and Cu(II)/Cu(I) redox cycles. As a result, SOD@Cu&Fe&PO 4 affords a significantly enhanced •OH generation capacity. Moreover, this hybrid material exhibits enhanced contaminant degradation efficiency and potent antibacterial activity against multidrug-resistant Escherichia coli (MDR E. coli ) and methicillin-resistant Staphylococcus aureus (MRSA). Graphical O 2 •− is generated as an intermediate in the reactions of coordinated Cu(II) and Fe(II) with H 2 O 2 . The in situ generated O 2 •− is subsequently utilized by encapsulated SOD, which in turn reduces Mn 3 + at the enzyme's active site to Mn 2 + . A continuous supply of O 2 •− to SOD accelerates the Mn 3 + /Mn 2 + redox cycle at its active center.

✓ 已验证 DOI 高影响因子
查看原文 查看 PubMed
INORGANIC CHEMISTRY · 2026 · IF 4.6

Amino Functionalization-Induced Coordination Geometry Switch Enables Pore Size Exclusion and Selective CHF3 Capture in Two Cu-Based Metal–Organic Frameworks

Xi-Ting Zhang,Li-Ping Zhang,Zhong-Lei Xing,Tianze Zhou,Shao-Min Wang,Qing-Yuan Yang

The coordination geometry of metal nodes is a critical yet overlooked variable in metal–organic framework (MOF) design. Here, we show that an amino substituent on the isonicotinic acid linker switches Cu(II) from five-coordinate square-pyramidal to four-coordinate square-planar, collapsing the framework from a 3D microporous network (Cu-ina, ina = isonicotinic acid) to a 2D layered structure (Cu-2ain, 2ain = 2-aminoisonicotinic acid). The amino group strengthens the Cu–N bond and eliminates one Cu–O contact, reducing the pore-limiting diameter to 3.27 Å and imposing complete size exclusion of both CHF3 (∼4.6 Å) and N2 (3.64 Å) in Cu-2ain. The 3D framework Cu-ina, free of this modification, achieves a CHF3 uptake of 50.1 cm3 g–1 at 298 K with an IAST selectivity of 46 for CHF3/N2, driven by cooperative C–H···F and C–H···O hydrogen bonding confirmed by GCMC simulations and DFT calculations. Five-cycle breakthrough experiments confirm excellent regenerability. This work demonstrates that ligand functionalization can inadvertently restructure metal coordination geometry and collapse framework dimensionality, overriding any intended surface-chemical benefit.

✓ 已验证 DOI PubMed 高影响因子
查看原文 查看 PubMed
已复制

文献关联基于可获得的产品、CAS、DOI 及引用记录。收录不代表作者或出版方对阿拉丁产品的背书,请以原始文献为准。