RSC Advances
·
2018
·Vol. 8
·期 9
·4604-4609
·
IF 2.936
Lei Lü,Hongming Lou,Yinglin Xiao,Guangzhao Zhang,Chaoyang Wang,Yonghong Deng
Triblock copolymer polydopamine-polyacrylic-polyoxyethylene (PDA-PAA-PEO) with excellent performance as a binder for silicon anodes was synthesized. Its structure was confirmed by 1H-NMR, FTIR and UV-vis spectroscopy. Results of electrochemical measurements indicated that a silicon anode based on PDA-PAA-PEO binder exhibited excellent cycle performance with a reversible capacity of 1597 mA h g−1 after 200 cycles at a current density of 0.5 C, much better than that of an electrode based on a polyvinylidene-fluoride binder. Improvement of the cycle performance and reversible capacity for silicon anodes could be attributed to the strong adhesive and high ion conductivity of PDA-PAA-PEO.
研究领域:
材料科学
·
电化学
·
能源存储
·
高分子化学
·
纳米材料
·
电池技术
✓ 已验证
DOI
高影响因子
ELECTROCHIMICA ACTA
·
2018
·
IF 5.116
Naseem Akhtar,Hongyuan Shao,Fei Ai,Yuepeng Guan,Qifan Peng,Hao Zhang,Weikun Wang,Anbang Wang,Bingyin Jiang,Yaqin Huang
Lithium-sulfur (Li-S) batteries with high specific capacity are expected to be a new generation of energy storage devices. However, the shuttle effect of lithium polysulfide makes it difficult to commercialize stable Li-S batteries. In this work, we designed a gelatin-polyethylenimine composite (GPC) as functional binder for Li-S batteries to improve the stability of electrode during discharge-charge process. GPC binder combines the dispersion and adhesion ability of gelatin, which keeps cathode homogeneous and stable during electrochemical reaction , and adsorption capability of PEI for polysulfide , which suppresses the “shuttling effect”. The result shows that GPC used as a binder remarkably enhanced cyclic performance of Li-S battery with good capacity retention of about 100% at current density of 1C (sulfur loading 1.5 mg cm −2 ) after 100 cycles. We believe that GPC would be a promising binder for highly stable Li-S batteries.
研究领域:
材料科学
·
电化学
·
能源存储
·
高分子化学
·
纳米复合材料
✓ 已验证
DOI
高影响因子
CHINESE JOURNAL OF CHEMISTRY
·
2013
·Vol. 31
·期 6
·745-751
·
IF 0.917
Yifei Wang,Daoyong Chen
Here we report novel shear-sensitive polymeric large compound micelles (LCMs) formed by self-assembly of glutathione end-capped poly(4-vinylpyridine) (GP4VP) in water containing 4 vol% methanol. The amphiphile prefers to form the kinetically stabilized LCMs due to the small length ratio of the hydrophilic part to the hydrophobic part; the encapsulation of the hydrophilic part within LCMs causes only a small enthalpy loss from a thermodynamic view. Sheared by vortex flows generated by vigorous stir, the LCMs evolve to thick wall vesicles, thin wall vesicles, broken vesicles and "pearl-necklace" structures consecutively. The high flexibility of the LCMs and the internal tension caused by the encapsulation of the hydrophilic part are responsible for the high shear sensitivity of the LCMs.
研究领域:
高分子化学
·
胶体与界面科学
·
纳米材料
·
自组装
·
流变学
✓ 已验证
DOI
高影响因子
CARBON
·
2012
·Vol. 50
·期 8
·2810-2815
·
IF 5.378
Yongqiang Dong,Ruixue Wang,Hao Li,Jingwei Shao,Yuwu Chi,Xiaomei Lin,Guonan Chen
Polyamine-functionalized carbon quantum dots (CQDs) with high fluorescence quantum yield (42.5%) have been synthesized by the low temperature (<200 °C) carbonization of citric acid with branched polyethylenimine (BPEI) in one simple step. The obtained BPEI–CQDs are spherical graphite nanocrystals (average 6.2 nm in size) capped with abundant BPEI at their surfaces. It is the first report that CQDs are both amino-functionalized and highly fluorescent, which suggests their promising applications in chemical sensing.
研究领域:
分析化学
·
纳米材料
·
生物传感
·
荧光成像
·
分子探针
✓ 已验证
DOI
高影响因子
International Journal of Electrochemical Science
·
2023
·Vol. 15
·期 5
·4722-4738
·
IF 1.5
Wen Liu,Yueli Shi,Quanchao Zhuang,Yongli Cuiab,Zhicheng Ju,Yanhua Cui
The effect of ethylene glycol bis(propionitrile) ether(DENE) as a novel electrolyte additive on the electrochemical performance of a graphite anode was studied in this paper. Fourier transform infrared spectroscopy(FTIR), charge/discharge tests, cyclic voltammetry(CV), X-ray photoelectron spectroscopy(XPS), scanning electron microscopy(SEM), and electrochemical impedance spectroscopy(EIS) were used to investigate the SEI film and the cycle performance of graphite anode. The initial charge capacities of the graphite electrode in the electrolytes without and with 1% DENE were 319 mAhg −1 and 349 mAhg −1 , respectively. After 60 cycles, the charge capacities without and with 1% DENE were 315 mAhg -1 and 350 mAhg -1 , respectively. and the capacity retention rates were 95.8% and 98.1%, respectively. DENE promoted the formation of a thin and uniform SEI layer and improved the stability of the electrode. The addition of DENE effectively improved the electrochemical performance of graphite anodes.
研究领域:
电化学
·
材料科学
·
能源存储
·
电池技术
·
表面化学
✓ 已验证
DOI
高影响因子
Journal of the Taiwan Institute of Chemical Engineers
·
2019
·
IF 3.834
Xiao Wang,George Q. Chen,Wei Zhang,Huining Deng
The development of reliable anion exchange membranes (AEMs) with superior antifouling properties is critical in practical applications of electrodialysis processes. For the first time, the AEMs were modified by poly (sodium 4-styrene sulfonate) (PSS) with titanium dioxide (TiO 2 ) nanoparticles using only one electrodeposition step to stabilize the nanoparticles on the membrane surface while improving their antifouling ability. Owing to the bonding between the sulfonic groups of PSS and TiO 2 , the TiO 2 nanoparticles were well dispersed in the modified layer. The deposition of PSS endowed the AEMs with a negatively charged surface, while the addition of TiO 2 nanoparticles further increased the charge density. The membrane resistance increased only marginally after 100-min of fouling experiments using sodium dodecyl benzene sulfonate (SDBS), due to the presence of TiO 2 on the modified AEMs. Ultraviolet (UV) irradiation was proven to be an effective approach in inducing good fouling reversibility of the TiO 2 -PSS modified AEMs through photocatalytic decomposition and hydrophilicity improvement.
研究领域:
膜科学
·
环境工程
·
材料化学
·
电化学
·
水处理技术
✓ 已验证
DOI
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2016
·Vol. 133
·期 35
·
IF 1.866
Yuanzhu Long,Fuhua Sun,Chao Liu,Dong Huang,Xingyi Xie
To explore a new blowing agent for polyurethanes (PUs), palmitic acid was grafted onto a branched polyethyleneimine (bPEI; weight-average molecular weight = 25,000 Da) via N,N ′-carbonyldiimidazole condensation to form a hydrophobically modified bPEI [palmitic acid grafted branched polyethyleneimine (C 16 –bPEI)] with a grafting rate of 12%. A CO 2 adduct of C 16 –bPEI, which trapped 16.8% CO 2 in it, was synthesized from C 16 –bPEI. The long alkyl chain grafting improved the dispersibility of the CO 2 adduct in the PU raw materials and favored a homogeneous release of CO 2 to blow PUs during the exothermic foaming process. The preliminary results show that the foams possessed a density of 72.0 kg/m 3 and a compressive strength of 246 kPa; this matched the required values of foams for the thermal insulation of underground steel pipes. This new blowing agent emitted nothing but CO 2 to the atmosphere, so it will not promote ozone depletion and will avoid global warming problems that are associated with traditional blowing agents such as chlorofluorocarbons and hydrochloroflourocarbons. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133 , 43874.
研究领域:
高分子化学
·
材料科学
·
绿色化学
·
能源与环境材料
·
工业催化
✓ 已验证
DOI
高影响因子
Journal of Materials Research and Technology-JMR&T
·
2023
·
IF 6.4
Jinhui Wang,Ruisong Wang,Xiaoxiao Ji,Chunde Jin,Yutao Yan
Phenol formaldehyde (PF) resin adhesives are widely used in the production of bamboo-based composites owing to their excellent bonding strength and durability. However, the inherent brittleness of cured PF resin may result in notable stress concentration at the interface between PF resin and bamboo bonding, leading to the generation of cracks. In this study, a hyperbranched compound polyethyleneimine (PEI) with high reaction activity was incorporated into a PF resin adhesive to toughen the adhesive and the bonding interface. And the effects of PEI incorporation on the properties of the adhesive and the bonding performance between PF resin and bamboo were comprehensively investigated. The results showed that introduction of flexible PEI chains could effectively facilitated stress transfer, avoiding stress concentration, thus enabling efficient energy release and play a toughening effect. In addition, PEI could react with PF resin and bamboo components during hot pressing, forming a three-dimensional network structure and enhancing the bonding interface, which was proved by FT-IR and XPS analysis. When 1 wt% PEI was incorporated, the bending strength and Charpy impact toughness of the modified PF resin was significantly increased by 38.88% and 76.02%, respectively, compared with the pure PF resin. While the dry and wet shear strength of the bamboo composite bonded by the PEI modified PF resin were also obviously increased. This study is expected to address the problem of cracking in the bonding interface of bamboo composite, and endow the composites with high strength and durability, which can prolong its service life and contribute to the healthy and sustainable development of the bamboo industry.
研究领域:
材料科学
·
木材科学与技术
·
高分子化学
·
复合材料工程
·
胶接与界面科学
✓ 已验证
DOI
高影响因子
JOURNAL OF APPLIED POLYMER SCIENCE
·
2021
·Vol. 139
·期 17
·52018
·
IF 3.125
Xianggui Zhang,Xianglong Li,Antuo Wang,Bin Yang,Teng Hou,Yishen Lu,Jing Zhou
The separation of stable oil/water emulsions is an urgent global issue. In this work, a porous and superhydrophobic polytetrafluoroethylene (PTFE) fibrous membrane was obtained by first centrifugal spinning PTFE/potato starch fibers and then heat treating the fibers to remove the starch. Results showed that spherical protrusions and irregular striped protrusions appeared on the surface of the prepared PTFE fibers, which significantly increased the roughness and hydrophobicity of the fibrous membrane. In addition, number density and shapes of these protrusions could be tuned by changing the extent of the heat treatment and the potato amylose content during the fiber preparation. The water contact angle on the structured PTFE membranes was as high as 160°, and the water sliding angle was as low as 3.4°. The results of oil/water separation experiments showed that the oil removal rate reached 99.5% based a permeability of 3670 L/m 2 /h, which suggested that the obtained PTFE fibrous membrane has great potential for use in oil/water emulsions separation.
研究领域:
材料科学
·
环境工程
·
膜分离技术
·
表面科学
·
化学工程
✓ 已验证
DOI
高影响因子
JOURNAL OF FOOD BIOCHEMISTRY
·
2021
·Vol. 45
·期 4
·e13647
·
IF 2.72
Yiqin Zhang,Honglei Mu,Haiyan Gao,Hangjun Chen,Weijie Wu,Yanchao Han,Xiangjun Fang,Chuan Tong
Mechanical damage and microbial infestation were critical issues during strawberry transportation. This study prepared a modified polyvinyl formal (PVFM) vibration-damping material and investigated its application in strawberry transportation. This modified PVFM was primarily composed of polyvinyl alcohol, starch, formaldehyde, and allyl isothiocyanate. Our results showed that the modified PVFM had good vibration-damping and antifungal properties with 0.137 g/m 3 of density, a water absorption ratio value of 6.24, 278 Pa of tensile strength, 3.86 Pa of elastic modulus, a buffer coefficient of 0.318, and antifungal rates of 68.8% and 80.6% against Bacillus anthracis and Botrytis cinerea , respectively. Moreover, this modified PVFM could enhance the storage life of strawberry by improving PAL activity from 376 to 3,125 U/g, inhibiting POD activity with a maximum value of 3.1 U/g, and decreasing CAT activity from 324 to 35 U/g. The modified PVFM presented a good vibration-damping capacity and the potential to extend strawberry shelf life. Practical applications Berry fruits were vulnerable to mechanical damage caused by vibration during transportation, resulting in quality deterioration, rot, and aging. In this study, modified polyvinyl formal (PVFM) was prepared and was of low density and displayed good mechanical, vibration-damping, and antifungal properties. The modified PVFM could improve the storage life of strawberry. Thus, the modified PVFM could have potential application in berry fruits transportation.
研究领域:
食品科学
·
农产品贮藏与加工
·
高分子材料学
·
园艺产品采后生理
·
包装工程
✓ 已验证
DOI
高影响因子
IONICS
·
2021
·Vol. 27
·期 8
·3339-3346
·
IF 2.817
Liu Huirong,Li Jianling,Feng Wei,Han Guimei
Commercial lithium-ion batteries have safety risks due to the use of electrolyte-containing flammable organic solvents. The development of all solid-state lithium ion batteries with solid electrolyte is a feasible technical way to improve the safety of batteries. In this work, PVDF-based composite solid-state electrolytes (CSEs) were prepared by coupling Li 6.4 La 3 Zr 1.4 Ta 0.6 O 12 (LLZTO) and polyvinylidene fluoride (PVDF). The electrochemical performance and interfacial compatibility between composite electrolyte and electrode were improved by the combination of appropriate amount of Li-ion-conducting particles and the insulating polymer. The corresponding solid-state battery of LiFePO 4 |PVDF-LLZTO-CSE| Li is fabricated and delivers initial discharge capacity of 162.4 mAh g -1 , and coulomb efficiency is approximately 98.5%. And the solid-state battery exhibits satisfactory rate capability and cycling stability at room temperature. This study suggests that a combination of the lithium garnet particles and insulating polymer is one of the promising methods to solve the problem of liquid electrolyte.
研究领域:
材料科学
·
电化学
·
能源存储
·
固态离子学
·
电池技术
✓ 已验证
DOI
高影响因子
INTERNATIONAL JOURNAL OF BIOLOGICAL MACROMOLECULES
·
2018
·
IF 3.909
Yunbo Wu,Ye Ying,Yuhong Liu,Haijiang Zhang,Jianying Huang
Poly (vinyl alcohol) (PVA) and chitosan (CH)-based blend films were prepared via a simple mixing and casting method. The films were characterized by Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), and ultraviolet–visible spectroscopy (UV–vis). Mechanical properties, thermogravimetric (TG), derivative thermogravimetric (DTG), and the inhibition of biofilm formation against Pseudomonas aeruginosa PAO1 ( P. aeruginosa PAO1) of CH/PVA films were investigated. The results indicated that CH and PVA in the blend films interacted by physical crosslinks consisting of intermolecular hydrogen bonds and intermolecular hydrogen bonds with compatibility, and were more thermally-stable than that of PVA. CH addition decreased the tensile strength and the light transmittance. CH60:PVA40 film showed notable activity against adhesion and inhibited biofilm formation of P. aeruginosa PAO1, indicating that CH60:PVA40 film could be applied as an antimicrobial and biofilm inhibiting food packaging material .
研究领域:
生物材料学
·
微生物学
·
食品科学
·
高分子科学
·
抗菌材料
·
包装工程
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）