Journal of Materials Chemistry A
·
2020
·Vol. 8
·期 46
·24579-24589
·
IF 11.301
Yongkang Han,Jinmei Xu,Wei Wang,Fu Long,Qunting Qu,Yan Wang,Honghe Zheng
Interfacial modification is one of the most important technologies to improve the overall electrochemical properties of Ni-rich cathodes. Herein, a novel strategy of in situ planting of an electrolyte film-forming additive on a single crystal NCM811 surface is proposed by consuming the residual lithium to develop a functional Al(Li)BOB nano-layer. Different from traditional physical coating, this approach cleverly consumed the undesirable residual lithium on the NCM811 surface. The in situ grown 30–50 nm Al(Li)BOB layer on the single crystal NCM811 cathode surface contributes to its much enhanced electrochemical performances. At a high operating voltage (charge voltage limit of 4.5 V vs. Li/Li+), the capacity retention is greatly increased from 57.0% to 83.5% after 295 cycles. Meanwhile, the incorporation of aluminum is effective in improving the thermal stability of the Ni-rich cathode. The novel interfacial strategy by in situ implanting of an electrolyte additive is of important significance for solving the critical interfacial issue for Ni-rich cathode materials.
研究领域:
材料科学
·
电化学
·
能源存储
·
锂离子电池
·
界面工程
·
纳米材料
·
固态化学
✓ 已验证
DOI
高影响因子
BIOELECTROCHEMISTRY
·
2022
·
IF 5.76
Wenjing Lai,Jiajia Li,Mingzhe Jiang,Chaoyun Ma,Chulei Zhao,Min Wang,Pengli Li,Shijie Yan,Yu Qi,Chenglin Hong
In electrochemical immunoassays, great breakthroughs have been made in ultrasensitive detection of tumor markers by amplifying signals with coreaction accelerators. Herein, carbon nitrides with nitrogen vacancies (CNNVs) are proposed as emitter, due to the introduction of nitrogen vacancies this emitter has better ECL efficiency, the phenomena of interface electron transfer and electrode passivation are improved. At the same time, it can also promote the electrochemical reduction of coreactant, making it an attractive and potential emitter. The electrode was modified with Ag-Ti 3 C 2 MXene. It not only accelerates electron transfer and increases the effective working area of the electrode, but also acts as a coreaction accelerator to promote the electrochemical reduction of the coreactant K 2 S 2 O 8 , resulting in a strong ECL signal. The immunosensor showed a good linear relationship in the range of 10 −5 -100 ng/mL with a detection limit of 0.36 fg/mL. In addition, the excellent properties of good specificity and ultra-high stability provide an effective method for ultra-sensitive immunoassays.
研究领域:
生物分析化学
·
肿瘤学
·
免疫学
·
纳米生物技术
·
分子诊断
·
转化医学
✓ 已验证
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2023
·
IF 9.9
Xin Guan,Huijie Pei,Xiaoyu Chen,Chen Chang,Siyuan Shao,Yu-Mo Zhang,Xingping Zhou,Hui Nie,Xiaolin Xie
The adsorption-catalysis synergy for accelerated conversion of polysulfides is critical toward the electrochemical stability of lithium-sulfur battery (LSB). Herein, a non-metallic polymer network with anion receptor units, trifluoromethanesulfonyl (CF 3 SO 2 -) substituted aza-ether, was in-situ integrated on PE separator, working as an efficient host for anchoring lithium thiophosphates (LPS) as redox mediators and polysulfides through Lewis acid-base interaction. The anchored LPS on the modified PE separator displayed a robust chemical adsorption ability towards polysulfides through the formation of S S bond. Meanwhile, LPS decreased the energy barrier of Li 2 S nucleation and promoted redox reaction kinetics. The battery with LPS decorated separator revealed a long cycling lifespan with a per cycle decay of 0.056 % after 600 cycles, and a competitive initial capacity of 889.1 mAh/g when the of sulfur cathode increased to 3 mg cm −2 . This work developed a new design strategy to promote the utilization of lithium phosphorus sulfide compounds in LSB.
研究领域:
电化学
·
能源材料
·
纳米材料
·
界面化学
·
储能技术
✓ 已验证
DOI
高影响因子
MICROPOROUS AND MESOPOROUS MATERIALS
·
2013
·
IF 3.365
Jing Cuan,Bing Yan
In our work, we achieve the multi-component assembly of novel kinds of photofunctional hybrid materials with polyoxometalates (POMs, Na 9 EuW 10 O 36 ·32H 2 O (EuW 10 O 36 9 - denoted as EuW10)) and benzoate (4-aminobenzoate, 4-hydroxybenzoate, 4-mercaptobenzoate) modified mesoporous silica through imidazolium ionic liquid (IL, 1-methyl-3-(trimethoxysilylpropyl) compound as double functional linkage. Using Pluronic P123 surfactant as a template, benzoate functionalized SBA-15 mesoporous host is synthesized as result of the co-condensation of tetraethoxysilane (TEOS) and benzoate modified siloxane as precursor. We fabricate POM into the framework of functionalized SBA-15 mesoporous silica with IL. Here IL behaves as double linkage, which both interact with PMO with electrostatic force through ion exchange and form covalent bond to the functionalized SBA-15 mesoporous silica through its alkoxy group after cohydroxylysis and copolycondensation process. Tb 3+ is further introduced into the above hybrid system through coordination bond to carboxylate group of benzoate unit, which can be expected to modify luminescence color and to obtain close white luminescence. The physical characterizations prove these hybrid materials possess high surface area, uniform mesoporous structure, good crystallization and relatively excellent luminescence properties.
研究领域:
无机化学
·
材料化学
·
纳米功能材料
·
光物理学
·
配位化学
·
溶胶-凝胶科学
·
稀土发光材料
✓ 已验证
DOI
高影响因子
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY
·
2023
·
IF 7.2
Xingxing Li,Yan Zhu,Nan Zhang,Yansheng Gong,Rui Wang,Huanwen Wang,Jun Jin,Ling Zhao,Beibei He
The development of symmetrical solid oxide fuel cells (SSOFCs) faces a significant challenge in designing electrode materials that exhibit both high activity and stability. In this work, a novel layered perovskite oxide symmetric electrode material PrBaFe 1.8 Hf 0.2 O 5+δ (PBFH) for SSOFCs is proposed and synthesized. Doping Hf at the B-site of PrBaFe 2 O 5+δ (PBF) improves the stability in reducing atmosphere and increases the concentration of oxygen vacancies . Furthermore, a small amount of RuO x is deposited by atomic layer deposition (ALD) onto PrBaFe 1.8 Hf 0.2 O 5+δ scaffold as symmetric electrodes. The surface modification of ALD-RuO x significantly boosts the catalytic activity for both fuel oxidation and oxygen reduction, simultaneously. Compared to PBF electrodes, the interfacial polarization resistances of RuO x -PBFH decrease to 0.77 Ω cm 2 under H 2 /Ar and 0.021 Ω cm 2 under air atmosphere at 800 °C, respectively. At 800 °C, SSOFCs equipped with RuO x -PBFH symmetric electrodes exhibit a high peak power density of 0.85 W cm −2 and 0.41 W cm −2 using humidified hydrogen and propane as fuels, respectively. Moreover, the RuO x -PBFH electrode demonstrates long-lasting performance, displaying high resistance against coking. These findings reveal a facile ALD approach for tailoring symmetric perovskite electrodes, offering robust and efficient electrocatalysis with efficient noble metal utilization.
研究领域:
材料科学
·
电化学
·
能源材料
·
固体离子学
·
催化化学
·
功能陶瓷
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）