CHEMICAL ENGINEERING JOURNAL
·
2021
·
IF 13.273
Yinwei Fu,Xiaofeng Lei,Huiming Yin,Xizheng Liu
Flexible lithium–air batteries (LABs) with a redox mediator (RM) in the electrolyte demonstrate enhanced round-trip efficiency. However, their cycle performance is unsatisfactory due to severe corrosion of the Li metal anode. Herein, we propose a two step gelatinization strategy to fabricate a gradient RMs (including LiI, TMPD, and DMPZ) gel electrolyte, in which the bare electrolyte gelatinization on the Li surface and then the electrolyte contained RMs sequentially gelled on the formed gel. The RMs mainly distributed at the surface and anchored at the cathode side. By suppressing the shuttle of RMs in the electrolyte and alleviating the passivation of the Li anode, the mid-charging potentials can reach 3.44 and 4.08 V at the 15th cycle with and without the LiI mediator, respectively. The energy efficiency is 63% even at the 150th cycle, whereas the corresponding energy efficiency are only 47% and 51% for the LABs with liquid and normal gel electrolytes, respectively. Moreover, the cycle life of the battery containing the gradient gel electrolyte is three times longer than that with the liquid electrolyte. The gel electrolyte further offers the flexibility of the device, and the laminated cells thus fabricated can readily operate under harsh bending conditions.
研究领域:
电化学
·
能源材料
·
纳米材料
·
界面化学
·
储能技术
·
先进电池
·
功能高分子
·
柔性电子
✓ 已验证
DOI
高影响因子
DYES AND PIGMENTS
·
2021
·
IF 4.889
You Liu,Fang Liu,Jungan Wang,Hongyan Huang,Suhao Yan,Song Gao,Lin Wang,Wei Huang,Tianshi Qin
Wide-bandgap photovoltaics (WBPV) could not only provide electrical energy by photoelectronic conversion of the invisible part of the solar spectrum, but also usually had the unique advantage of high open circuit voltage ( V oc). In this work, we reported a novel HTM based on tetrakis (N-phenothiazine) Spirobifluorene (Spiro-PT), its HOMO energy level could be well matched with MAPbBr 3 perovskite HOMO energy level. This HTM could effectively suppress nonradiative recombination, which leads to an increase in the photovoltage of WBPV to more than 1.41 V. As a result, the n-i-p mesoscopic structured WBPV achieved a champion PCE of 7.36% as well as excellent operational stability exhibiting 91% of initial efficiency after 500 h continuous illumination without encapsulation. Based on the high V oc of the MAPbBr 3 /Spiro-PT device, the photovoltaic electrochromic device showed a response speed (the average coloring time was 40 s and the bleaching time was 272 s) and high average visible light transmittance contrast (about 37% in 450–780 nm), the corresponding electrochromic device with maximum dynamic contrast up to 46% at 600 nm between bleached and colored states. This WBPV-powered electrochromic system could provide a pathway towards stand-alone smart window technique for future energy-saving buildings.
研究领域:
材料科学
·
光伏技术
·
纳米能源
·
智能窗技术
·
器件物理
✓ 已验证
DOI
高影响因子
CARBON
·
2024
·
IF 10.5
Boru Du,Jingyu Lu,Guantao Wang,Mingguang Han,Yan Gao,Sida Luo
Laser-induced graphene (LIG) is a highly promising technology for assembling thin-film electronics with miniaturized surficial patterns, although hard to guarantee both high-quality formation of raw materials and high resolution of feature size. In this study, a combined microcontact printing (μCP) and LIG protocol is creatively utilized to fabricate ultra-thin graphene films with highly ordered micro-stripe arrays. In addition to realize various patterned structures with unique scalable and stackable characteristics, PAA concentration (4–8 wt%) is systematically investigated as a critical parameter to precisely control the feature size of micro-patterns before and after the irradiation process, including line width (before: 5.37–22.44 μm, after: 4.83–22.32 μm) and average height (before: 69.81–187.39 nm, after: 5.72–48.61 nm). By further exploring a defocused multi-lasing strategy, sheet resistance of the graphene array could be optimized dramatically from 634.1 kΩ/sq to 1.9 kΩ/sq, while maintaining low ablation (45.38 % porosity) and high carbon content (84.2 wt%). Lastly, the process is demonstrated to assemble different graphene based electronic devices with miniaturized sizes, including liquid sensors with sensitivity of 2.7 % μL −1 and electrothermal heaters with temperature-ramping rate as high as 24.7 °C/s and working temperature as high as 248 °C.
研究领域:
材料科学
·
纳米科技
·
电子工程
·
生物医学工程
·
表面科学
·
柔性电子学
✓ 已验证
DOI
高影响因子
Advanced Electronic Materials
·
2021
·Vol. 8
·期 4
·2101125
·
IF 7.295
Qi-Qi Wang,Fan Li,Sheng-Qing Xia,Jian Liu,Xiao-Cun Liu,Ling Chen,Cheng-Qian Zhang
The single crystal growth of Mg 3 Bi 2 -based thermoelectric materials is of great significance for their applications near room temperature. So far, it is still a big challenge to grow such bulk single crystals and attempts are primarily focused on the metal flux methods. For the first time, bulk single crystals of n-type Mg 3 Bi 1.49 Sb 0.5 Te 0.01 are directly grown by applying an In-situ Loading Bridgman method. The as-grown single crystal features an excellent carrier mobility of 220 cm 2 V −1 s −1 , which is among the best compared to other Mg 3 Bi 2 -based bulk materials. Besides, this method is successfully developed to fast grow uniform polycrystalline materials with high thermoelectric and mechanic performance. As demonstrated by the single-leg device, a large temperature difference of 10.5 K is achieved at the supplied electric current of 0.6 A, much superior to other room temperature state-of-the-art thermoelectric materials. With the single crystalline and polycrystalline materials prepared reliably and conveniently, in-depth investigations on the Mg 3 Bi 2 thermoelectric system can be greatly benefited, which should as well significantly facilitate their practical applications at room temperature.
研究领域:
材料科学
·
热电学
·
凝聚态物理
·
晶体生长
·
功能材料
·
能源材料
✓ 已验证
DOI
高影响因子
Materials Today Physics
·
2022
·
IF 11.021
An Hua,Zifeng Mai,Binyu Wu,Zichong Ji,Min Fu,Yougen Hu,Siya Huang
Flexible and stretchable electrodes as the cornerstone of bioelectronics are bridging human with biomedical devices in an unprecedentedly intimate and safer way. However, maintaining high electrical properties while adapting to moist, complex and dynamic biosurfaces for a prolonged period of usage remains a great challenge. Herein, we demonstrate an omnidirectionally stretchable transparent electrode based on serpentine Au nanotrough (AuNT) networks with highly tunable optoelectronic performances (sheet resistance of down to ∼13 Ω sq −1 at transmittance of 90%). Owing to the junction-free nanoweb structure with an ultralow percolation density, the AuNT networks demonstrate excellent thermal stability as an efficient Joule heater with a wide operating temperature range up to 390 °C. The in-plane buckled AuNT electrode exhibits controllable heat generation upon repetitive tensile strains of 60%, enabling wearable thermotherapy at highly strained joints . Such highly stretchable electrodes can be directly laminated on the balloon catheter as expandable, high-density nanomesh ablators, showing excellent thermal and moisture stability during 15 days of storage under conditions of relative humidity of 85% at 70 °C and over 1000 heating cycles to 60 °C, offering strong potential for biomedical therapeutics , such as thermal ablation and electrochemotherapy.
研究领域:
生物医学工程
·
柔性电子学
·
转化医学
·
生物传感器
·
组织工程
·
纳米医学
·
穿戴式医疗设备
✓ 已验证
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2021
·
IF 8.128
Xuejiao Tao,Yuman Zhou,Kun Qi,Chaozhong Guo,Yunling Dai,Jianxin He,Zhao Dai
Flexible triboelectric generators present a wide range of prospective applications owing to their small size, light weight, and wearability; in addition, they can convert external mechanical energy into electrical energy to provide an energy supply for wearable electronic products. In this study, a wearable textile triboelectric generator was developed by weaving polyurethane (PU) nanofiber core-spun yarn and Si 3 N 4 -electret-doped polyvinylidene fluoride (PVDF) nanofiber core-spun yarn into a double-layer fabric. Within the double-layer fabric, one layer was Si 3 N 4 -doped PVDF (denoted as Si 3 N 4 @PVDF) nanofiber fabric, and the other was PU nanofiber fabric. When subjected to an external mechanical force, PU nanofiber fabric and Si 3 N 4 @PVDF nanofiber fabric came into contact and were able to convert external mechanical energy into electrical energy. The most notable instantaneous electrical performance of this triboelectric nanogenerator was open circuit voltage of 71 V, short-circuit current of 0.7 μA, and output power of 56 μW. Additionally, the wearable textile triboelectric generator exhibited superior washability, stability, and cycle durability. More significantly, it was capable of driving some low-consumption electronic products, including capacitors, LED bulbs, and digital meters, thereby exhibiting a strong potential for flexible self-powered electronic devices and intelligent textiles .
研究领域:
纳米能源材料
·
智能纺织工程
·
柔性电子学
·
能量收集技术
·
可穿戴设备
✓ 已验证
DOI
高影响因子
ELECTROCHIMICA ACTA
·
2016
·
IF 4.803
Na Li,ChunYi Zhi,Haiyan Zhang
The preparation of high specific-capacity pseudocapacitive transition-metal-oxide/hydroxide (TMH) materials into transparent micro-structure electrodes is a great challenge and has become the bottleneck restricting the performance of transparent flexible supercapacitors . Beyond that, extending the operating voltage window is an urgent need for improving energy density . Here, Co(OH) 2 nanosheets and amorphous FeOOH nanowires were prepared into transparent films through a simple and scalable bio-inspired method at the air-solution interface. Both nanostructures are enwrapped in graphene shells (Co@Gr-TFandFe@Gr-TF) for use as transparent asymmetric pseudocapacitive electrodes. The unique encapsulation structures (1) provide pseudocapacitive electrode materials, especially an amorphous FeOOH structure cathode, (2) build up rapid three-dimensional electron and ion transport pathways together with the underlying ITO layer, (3) alleviate the exfoliation and dissolution of the active materials into electrolyte, and (4) extend the potential window of the FeOOH cathode from −0.8 ∼ 0 V to −1.2 ∼ 0 V with minimal cycling stability degradation. The asymmetric transparent and flexible supercapacitor based on Co@Gr-TF//Fe@Gr-TF operated at 1.8 V exhibits good transparency (50.5% at 550 nm), high specific capacitance (25.5 mF cm −2 , one order higher than the maximum value reported for FFT-GP), and high energy density (1.04 mWh cm −3 , comparable to that of nontransparent devices) as well as a long cycle life (10 000 cycles) with high-capacity retention (83.5%).
研究领域:
材料科学
·
纳米科技
·
电化学
·
能源存储
·
柔性电子学
·
功能薄膜
✓ 已验证
DOI
高影响因子
JOURNAL OF COLLOID AND INTERFACE SCIENCE
·
2024
·
IF 9.4
Ying Jiang,Kai Chen,Jinping He,Yuxue Sun,Xiaorong Zhang,Xiaoxing Yang,Haiming Xie,Jun Liu
Composite solid electrolytes (CSEs), which combine the advantages of solid polymer electrolytes and inorganic solid electrolytes, are considered to be promising electrolytes for all-solid-state lithium metal batteries. However, the current CSEs suffer from defects such as poor inorganic/organic interface compatibility, lithium dendrite growth, and easy damage of electrolyte membrane, which hinder the practical application of CSEs. Herein, a CSE (PBHL@LLZTO@DDB) with polyurethane (PBHL) as the polymer matrix and Li 6.4 La 3 Zr 1.4 Ta 0.6 O 12 (LLZTO) modified by silane coupling agent (DDB) as inorganic fillers (LLZTO@DDB) has been prepared. Disulfide bond exchange reactions between PBHL and LLZTO@DDB enable PBHL@LLZTO@DDB to form a dynamic three-dimensional (3D) inorganic/organic hybrid network, which promotes the uniform dispersion of LLZTO in PBHL@LLZTO@DDB, improves the Li + conductivity (1.24 ± 0.08 × 10 −4 S cm −1 at 30 ℃), and broadens the electrochemical stability window (5.16 V vs. Li + /Li). Moreover, a combination of hydrogen bonds and disulfide bonds endows PBHL@LLZTO@DDB with excellent self-healing properties. As such, both all-solid-state symmetric and full cells exhibit excellent cycle performance at ambient temperature. More importantly, the healed PBHL@LLZTO@DDB can almost completely restore its original electrochemical properties, indicating its application potential in flexible electronic products.
研究领域:
材料科学
·
电化学
·
能源存储
·
高分子化学
·
固态离子学
✓ 已验证
DOI
高影响因子
APPLIED SURFACE SCIENCE
·
2023
·
IF 6.7
Shijie Sun,Baijin Li,Wei Xiong,Boyu Fu,Yong Zhang,Zilin Ruan,Lei Gao,Xiaoqing Zuo,Jianchen Lu,Jinming Cai
Supramolecular self-assembly offers a feasible route for nanopatterning and functionality. The construction and precise control of selective adsorption at the molecular scale play essential roles in fundamental sciences and practical applications. Molecular tiling such as trihexagonal tiling Kagome networks has potential promising chemical and physical properties. Distorted Kagome-like networks controllable fabrication is possible by coupling molecular functional groups and substrate atoms. A chiral Kagome-like network was constructed using IFDO ([1,2-b]fluorene-6,12-dione) as precursor molecules complemented with molecular beam epitaxy and annealing strategies. Revealing arrangements of the assembled network of O-Cu metal coordination linked Kagome-like networks on the Cu(1 1 1) surface and their assembly mechanisms and cavity characteristics were explored in detail through scanning tunneling microscopy combined with density functional theory. Based on the electronic state difference between the hole center of the network and the molecular backbone, the host–guest network was successfully prepared by co-depositing C 60 molecules. Kagome-like networks could as an efficient template for regulating the adsorption configuration of C 60 . Our results demonstrate a controllable and efficient method to design atomically precise ordered host–guest assemblies on solid surfaces, advancing the approach is yet another step toward the fabrication of molecular devices.
研究领域:
表面科学
·
纳米材料学
·
超分子化学
·
凝聚态物理
·
分子自组装
·
扫描探针显微学
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）