JOURNAL OF ALLOYS AND COMPOUNDS
·
2022
·
IF 6.371
Jianling Huang,ChengWei Liao,Hui Wang,YuJun Zhao,Liuzhang Ouyang,Jiangwen Liu,Min Zhu
Mg-based alloy anodes suffer from severe corrosion in conventional electrolytes (KOH solution) and this substantially obstructs the cycle life, which is a great challenge for using them in the Ni-MH battery. Herein, a high concentration tetramethylammonium hydroxide (TMAH) aqueous electrolyte with a special hydrate structure is explored and enables excellent cycle stability and high capacity for Mg-based alloy anodes. In this electrolyte, the Mg 0.4 Ti 0.1 Ni 0.5 alloy anode delivers a maximum discharge capacity of 466 mAh g −1 , and maintains 210 mAh g −1 after 100 cycles owing to the reduced corrosion rate , which are much better than that in 6 M KOH electrolyte, being 425 mAh g −1 and 69 mAh g −1 , respectively. Furthermore, by in-situ forming Cu coating on the Mg 0.4 Ti 0.1 Ni 0.5 electrode surface during charging process with the adding 0.01 M of Cu(OH) 2 in TMAH electrolyte, the corrosion of the electrode is further suppressed and the reversible capacity can reach 313 mAh g −1 after 100 cycles. The high conducting Cu coating can also increase the rate capability of the electrode by promoting the charge transfer. Thus, using TMAH electrolytes provides a new approach to promote the electrochemical performances of Ni-MH batteries with Mg-based alloy anodes.
研究领域:
材料科学
·
电化学
·
能源存储
·
金属腐蚀与防护
·
功能材料
·
电池技术
✓ 已验证
DOI
高影响因子
Nano Energy
·
2020
·
IF 16.602
Jingyi Wu,Xiongwei Li,Zhixiang Rao,Xiaoning Xu,Zexiao Cheng,Yaqi Liao,Lixia Yuan,Xiaolin Xie,Zhen Li,Yunhui Huang
Lithium metal is a promising anode material for rechargeable batteries with high energy density . However, the uncontrollable dendrite growth severely hinders the commercialization of Li metal anode . Inspired by the “leveling” mechanism in traditional electroplating, we demonstrate that boron nitride nanosheets (BNNSs) as a liquid electrolyte additive can level out Li protrusions and enable dendrite-free Li metal anodes. 2D BNNSs can automatically and continuously flatten Li deposits and accommodate volume changes during Li plating/stripping. B atoms in BNNS as Lewis acid sites interact with Lewis basic anions in electrolyte, reducing Li + concentration gradient and unifying Li deposition. The collect effects of BNNS additive give rise to dendrite-free Li anodes over 400 h and deep plating/stripping up to 35 mAh cm −2 , as well as potential application in sub-zero temperature batteries (−20 °C). Li–S full cells using BNNS electrolyte also exhibit improved performance. This simple and effective strategy is applicable to develop dendrite-free Li or other metal anodes in high-performance energy storage devices.
研究领域:
材料科学
·
电化学
·
能源存储
·
纳米材料
·
电池技术
✓ 已验证
DOI
高影响因子
Small Methods
·
2024
·Vol. 8
·期 7
·2301233
·
IF 10.7
Xiaolin Ye,Ningxin Xiong,Shaopei Huang,Qixing Wu,Hongning Chen,Xuelong Zhou
Tin-based hybrid flow batteries have demonstrated dendrite-free morphology and superior performance in terms of cycle life and energy density. However, the quick accumulation of electrodeposits near the electrode/membrane interface blocks the ion transport pathway during the charging of the battery, resulting to a very limited areal capacity (especially at high current density) that significantly hinders its deployment in long-duration storage applications. Herein, a conductivity-activity dual-gradient design is disclosed by electrically passivating the carbon felt near the membrane/electrode interface and chemically activating the carbon felt near the electrode/current collector interface. In consequence, the tin metals are preferentially plated at the region near electrode/current collector, preventing the ion transport pathway from being easily blocked. The resultant gradient electrode demonstrated an unprecedentedly high areal capacity of 268 mAh cm −2 at a current density of as high as 80 mA cm −2 . Numerical modeling and experimental characterizations show that the dual-gradient electrode differs from conventional electrodes with regard to their reaction current density distribution and electrodeposit distribution during charging. This work demonstrates a new design strategy of 3D electrodes for hybrid flow batteries to induce a desirable distribution of electrodeposits and achieve a high areal capacity at commercially relevant current densities.
研究领域:
电化学储能
·
材料科学
·
能源化学
·
电池技术
·
功能材料
·
电化学工程
✓ 已验证
DOI
高影响因子
SEPARATION AND PURIFICATION TECHNOLOGY
·
2022
·
IF 9.136
Kai Wang,Guangzhen Li,Yanhong Li,Yuan Chen,Ling Zhang,Zhiying Zhu,Zhiyong Xu,Wenbo Zhao
In the present work, a kind of amine alkyl siloxane N -butyl-N-((1,1,3-trimethyl-3,3-diphenyldisiloxaneyl)methyl)butan-1-amine (BTDMBA) was synthesized and used to capture SO 2 . Its thermal decomposition temperature is 160℃, which is comparable with that of Ionic liquids (ILs), but its viscosity is only 125 mPa∙s at 25℃ after the absorption of SO 2 , which is much lower than that of ILs. The reaction mechanism is that BTDMBA reacted with SO 2 to form charge transfer complex BTDMBA∙SO 2 . The reaction enthalpy and entropy change are −83.95 kJ/mol and −240.48 J·mol −1 ·K −1 , respectively, which are more negative than that of ILs. By comparing the enthalpy and entropy change of amine alkyl siloxane and absorbents reported in literatures, an unexpected entropy enthalpy compensation phenomenon was discovered and the isokinetic temperature was found to be 371 K. Based on this phenomenon and the optimization objective function, it was also found that with the decrease of entropy change, the optimal absorption and desorption temperature difference increased initially and decreased afterwards. The maximum of entropy changes is −201 J·mol −1 ·K −1 for absorbent to achieve recycle absorption capacity 0.79 mol/mol under the condition of absorption pressure 0.002 bar and desorption pressure 1 bar.
研究领域:
物理化学
·
环境化学
·
分离科学
·
能源材料
·
工业气体净化
·
绿色化工
✓ 已验证
DOI
高影响因子
POLYMER
·
2011
·Vol. 52
·期 23
·5312-5319
·
IF 3.829
Dongyang Chen,Shuanjin Wang,Min Xiao,Dongmei Han,Yuezhong Meng
High-molecular-weight bulky-block poly(fluorenyl ether thioether ketone)s were successfully synthesized by a two steps one-pot protocol using N,N′ -dimethy- S -carbamate masked dithiols for vanadium redox flow battery (VRB) application. The followed sulfonation procedure gave birth to novel sulfonated block poly(fluorenyl ether thioether ketone)s (SPFETKs) with controlled ionic exchange capacities (IEC). Membranes with proton conductivities higher than (IEC > 1.66 mequiv. g −1 ) or comparable to (IEC < 1.66 mequiv. g −1 ) that of Nafion117 membrane were achieved. The VO 2+ permeabilities of SPFETKs membranes were much lower than that of Nafion117 membrane. The thermal properties, mechanical properties, oxidative stability , water uptake, proton conductivity, VO 2+ permeability and cell performance were investigated in detail.
研究领域:
高分子化学
·
能源材料
·
电化学
·
膜科学与技术
·
功能高分子
✓ 已验证
DOI
高影响因子
ELECTROCHIMICA ACTA
·
2021
·
IF 6.901
Hua Tian,Kaixin Zhu,Wang Li,Lin Wang,Zhifeng Yu,Yuannan Lai,Yunyi He
Ni-Co layered double hydroxide (NCLDH) with nitrate anions as interlayer counter ions was obtained via an oxidation-induced anion intercalation process. The optimization on the tunable proportion between divalent and trivalent metal cations in NCLDH host layers is realized in the dependence on the regulation of the additive amount of hydrogen peroxide as an oxidizing agent. The increase of trivalent metal cations facilitates the intercalation of nitrate anions into the interlamellar region between NCLDH host layers. Importantly, the electrostatic interaction between NCLDH host layers and interlayer anions results in the formation of hierarchical flower-like morphologies towards the enhancement of specific surface areas. Moreover, the increase in number of interlayer nitrate anions expands effectively interplanar spacing between NCLDH host layers. Remarkably, this unique structure not only accelerates the diffusion process of active hydroxide anions in the bulk phase of LDH, but also strengthens the stability of the hierarchical structure during electrochemical reactions. The electrochemical evaluation shows that NCLDH-16 achieves a superior specific capacity of 802 C g −1 at a current density of 1 A g −1 with a capacity retention of 86.7% as the increase of current densities to 10 A g −1 . The NCLDH-16//AC hybrid supercapacitor delivers a maximum energy density of 37.6 Wh kg −1 at a power density of 800 W kg −1 as well as still retains 87.4% of the initial capacitance after 10 000 cycles, suggesting great potential in practical energy storage devices.
研究领域:
材料科学
·
电化学
·
能源存储
·
纳米材料
·
功能材料
·
电化学能量存储
✓ 已验证
DOI
高影响因子
APPLIED ENERGY
·
2024
·
IF 10.1
Yaning Kong,Honglin Yu,Mengqi Liu,Guodong Zhang,Fei Wang
Hydrate was considered to be the next generation hydrogen storage material , and hydrate-based hydrogen storage (HBHS) would play an important role in future hydrogen economy, but sluggish hydrate formation kinetics presents huge technological challenge for its application. Herein, a nano promoter of -SO 3 − @PSNS was prepared by soap-free emulsion polymerization , and a dual kinetic promoter system (L-methionine/-SO 3 − @PSNS) was applied to enhance the formation kinetics of mixed H 2 /DIOX hydrate. At a moderate condition (12 MPa and 274.15 K), hydration efficiency under a driving force of 2.1 MPa is significantly enhanced by the synergy of the dual kinetic promoters, hydrate induction time reduces from 443.2 ± 209.73 min to 24.7 ± 17.16 min, while hydrate growth rate increases by 43.75%, and hydrogen storage capacity is up to 0.473 ± 0.041 wt% that increases by 62.8%. At a more moderate condition (10 MPa and 274.15 K) with an extremely low driving force of 0.1 MPa, enhanced hydrate formation was obtained in a composite promotion system of the dual kinetic promoters and dual thermodynamic promoters (THF/DIOX), which also performs exceptionally in term of recycling. The presence of a small amount (0.35 mol%) of THF reduces the induction time by 93.5%, and hydrate growth rate increases by 130.18%, while satisfactory hydrogen storage capacity (0.346 ± 0.017 g/g) is still remained in mixed H 2 /DIOX/THF hydrate, the structure of which was confirmed by Raman spectrum . This work presents an effect approach on enhancing the formation kinetics of H 2 -contained hydrate under low driving force, and this finding provides important insight for HBHS.
研究领域:
物理化学
·
能源材料
·
气体储存
·
化学工程
·
纳米材料科学
·
分子模拟
·
可持续能源
✓ 已验证
DOI
高影响因子
危险品化学品经营许可证（带存储）